Paxton ins-20605 Mode d'emploi

Taper
Mode d'emploi
Paxton
ins-20605
Net2 desktop reader USB
1
1
2
3
4
1 2
1
2
3
4
3
514-326
100mA
4.75V DC - 5.25V DC
Current
Voltage
Operating
temperature
Waterproof
-40°C - +66°C
-40°F - +131°F
Installation guidelines
Desktop Reader
Power supply
Maintenance
This unit is for indoor use only
Plug the reader into a convenient USB port on the PC with the
supplied USB cable
Stop and then restart the Net2 server program. The device will
now be available to the Net2 program
This unit requires Net2 v3.09 or later software. Support for Mifare
cards requires v4.17 or later.
Call Technical Support if you require a software upgrade.
The desktop reader is designed to sit next to the PC. It is used for adding
tokens to a Net2 system and also for identifying lost cards. Additional
workstations can also have desktop readers.
With the Net2 software running, any new token presented above the
desktop reader will cause the new user wizard to appear with the
appropriate card number displayed.
The users details can then be entered and the token issued. If the token
is already known to the system, the relevant user’s record will appear
The power for the unit is supplied via the USB cable. No additional
supply is required
Wiring methods shall be in accordance with the National Electrical
Code (ANSI/NFPA70), local codes, and the authorities having
jurisdiction.
Following the completed installation of this equipment, no further
maintenance or testing is required.
It is advisable to ensure that any third party backup power supplies
or recovery procedures are checked regularly to ensure that the
operation of the Paxton system is not compromised.
3 4
514-326
100mA
4.75V DC - 5.25V DC
Current
Voltage
Operating
temperature
Waterproof
-40°C - +66°C
-40°F - +131°F
5
+44 (0)1273 811011
paxton.support
877.438.7298
usapaxton.support
+31 (0)76 3333 999
paxton.benelux.support
+32 (0) 78485147
paxton.benelux.support
+49 (0) 251 2080 6900
paxton.gmbh.support
+33 (0)1 57 32 93 56
paxton.support
+27 (0) 21 4276691
paxton.support
8000 3570 3783
paxton.support
+52 55 5351 3667
paxton.soporte
+57 1508 8198
paxton.soporte
+44 (0)1273 811011
paxton.support
5 6
+44 (0)1273 811011
paxton.support
877.438.7298
usapaxton.support
+31 (0)76 3333 999
paxton.benelux.support
+32 (0) 78485147
paxton.benelux.support
+49 (0) 251 2080 6900
paxton.gmbh.support
+33 (0)1 57 32 93 56
paxton.support
+27 (0) 21 4276691
paxton.support
8000 3570 3783
paxton.support
+52 55 5351 3667
paxton.soporte
+57 1508 8198
paxton.soporte
+44 (0)1273 811011
paxton.support
Ce dispositif est conforme à la section 15 du règlement de la FCC. Le fonctionnement est soumis aux deux
conditions suivantes : (1) ce dispositif ne doit pas créer d'interférences nuisibles et (2) ce dispositif doit accepter
toute interférence reçue, y compris des interférences qui peuvent causer un fonctionnement non souhaité. Tout
changement ou modication non agréé par la partie responsable de la mise en conformité peut entraîner une
interdiction d'utilisation de l'équipement.
Conformité et limitations du produit
Ce dispositif est conforme au(x) standards RSS de l'industrie Canadienne sans-licence. Le fonctionnement est
soumis aux deux conditions suivantes : (1) ce dispositif ne doit pas créer d'interférences nuisibles et (2) ce dispositif
doit accepter toute interférence reçue, y compris des interférences qui peuvent causer un fonctionnement non
souhaité.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modications not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
North America:- Product compliance and limitations
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
The declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596
These products are not suitable for retail sale. All warranties are invalid if these products are not installed by
a competent person.
Paxton Access Ltd hereby declares that this product is in conformity with all the essential requirements of the
Directive 2014/53/EU.
http://paxton.info/4867
FCC Compliance
Conformité FCC
http://paxton.info/1606
Made in the UK
© Paxton Ltd 1.0.4 27/05/2015
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Paxton ins-20605 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues