SportsArt A976 Le manuel du propriétaire
- Taper
- Le manuel du propriétaire
A976 OWNER’S MANUAL CONTENTS
1. INTRODUCTION ................................................................................ 2
2. SAFETY PRECAUTIONS .................................................................. 3
3. LIST OF PARTS ................................................................................. 4
4. ASSEMBLE THE PRODUCT ............................................................. 6
STEP 1 Install the Seat Support and Connector .................................... 6
STEP 2 Install the Handlebar .................................................................. 7
STEP 3 Install the Seat Frame ............................................................... 8
STEP 4 Install the Cylindrical Cushion .................................................. 9
STEP 5 Install the Seat Back ................................................................. 10
STEP 6 Install the Seat Bottom ............................................................. 11
STEP 7 Install the Weight Plate Pegs ................................................... 12
STEP 8 Secure the Unit ......................................................................... 13
STEP 9 Unit Inspection .......................................................................... 14
5. OPERATE THE PRODUCT ............................................................... 15
OPERATION Safety Operating Area ..................................................... 15
OPERATION Operate the Product ........................................................ 16
6. MAINTENANCE ................................................................................ 18
MAINTENANCE Safety Precautions ..................................................... 18
MAINTENANCE Schedule .................................................................... 19
MAINTENANCE Task List .................................................................... 20
MAINTENANCE One-Year Maintenance Log ....................................... 21
7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 22
8. APPENDIXES ................................................................................... 23
APPENDIXES Exploded Diagram ........................................................ 23
*We reserve the right to revise this manual at any time without notice.
2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the A976 Leg
Extension machine. Constructed of high quality materials and designed for years of
reliable performance, this product was made for full commercial use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of
this product will help ensure that exercisers obtain their tness goals safely and
successfully.
3
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain precau-
tions apply during the use of this product. Please note the following safety precau-
tions:
• Please read the entire manual before assembly and operation. Make sure the
product is installed and operated as instructed in this manual.
• Assemble and operate the product on a solid, level surface. Do not use outdoors
or near water, including pools and saunas.
• Check the product before every use. Make sure all parts are assembled, and all
fasteners are tightened. Do not use the product if it is disassembled in any way.
• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes
with leather soles or high heels. Tie all long hair back. Do not go barefoot on this
product.
• Keep away from moving parts. Moving parts may or may not stop immediately if
an object becomes caught or impedes normal motion.
• Use this product only for its intended purpose as described in this manual.
• Be careful when mounting and dismounting the unit.
• Never operate this product if it has been damaged in any way. If it is not work-
ing properly, or has been dropped or damaged, contact a service technician for
repairs.
• Do not use accessories or parts that are not specifically recommended by the
manufacturer (SportsArt). Such parts might cause injuries or cause the unit to
fail and void the warranty. We are not responsible for any safety issue that arises
due to the misuse of accessories or parts. At the same time, we will terminate
the warranty terms of this equipment.
• This product is not intended for use by persons (including children 12 or younger)
with reduced physical, sensory, or mental capabilities, or by people who are
otherwise deficient in product knowledge or experience. If such people use this
product, they should be given training and be supervised at all times by some-
one responsible for their safety.
• Contact your SportsArt representatives on all materials damaged in shipment.
(Note: Shipping damages are the responsibility of the carrier.)
• Unpack and verify contents of boxes according to the list of parts to check if any
parts are missing.
• Children 12 or younger should be supervised to ensure that they do not play on
or near the product.
• The user weight limit for this product is 227 kg, 500 lb.
• Maintenance and repair must be performed by trained service personnel only.
Improper maintenance would not only damage the machine, but may also pres-
ent a danger to the exerciser.
• Over exercise may result in serious injury or death
• Warning that any of the adjustment devices that could interfere with the user’s
movement should not be left projecting.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-
OUT and consult your physician immediately. Work within your recommended ex-
ercise level. DO NOT work to exhaustion. Before beginning any exercise program,
you should consult with your doctor. It is recommended that you undergo a complete
physical examination.
*NOTE: Each machine provides a different resistance ratio of weight stack.
4
3. LIST OF PARTS
Assembly Parts
No. Name Qty. No. Name Qty.
A1 Right frame 1 A8 Seat bottom 1
A2 Seat support 1 A9 Cylindrical cushion 2
A3 Connector 1 A10 Curved connecting plate 4
A4 Left frame 1 A11 Weight plate peg 1
A5 Seat frame 1 A12 Owner’s manual 1
A6 Handlebar 1 A13 Hardware kit 1
A7 Seat back 1
5
Components on the Product
No. Name Specication Notes
30 Washer D16*d10.2*t1.0
Nylon hex lock nut M10
31
Nylon hex lock nut M8
Flat washer D17*d8.3*t2
Spring washer M8
Inner hex screw M8*P1.25*L30
32
Inner hex screw M6*P1.0*L25
Spring washer M6*t1.5
Washer D16*d10.2*t1.0
33 Inner hex screw M8*P1.25*L30
34 Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
35 Nylon hex lock nut M8
Beveled head inner hex screw M8*P1.25*L20
36
Flat washer D22*d8.2*t2
Spring washer M8
Mushroom top inner hex screw M8*P1.25*L25
37 Mushroom top inner hex screw M6*P1.0*L15
Waved washer D20*d7*t2.0
38
Inner hex screw M6*P1.0*L10
Spring washer M6
Waved washer D20*d7*t2.0
Components in the Hardware Kit
No. Name Qty. Specication Notes
10 Round sticker 2
Floor xing bracket 2
Double open-end wrench 2 13mm*17mm
L-shaped Allen wrench 1 M6*L70mm
L-shaped Allen wrench 1 M4*L60mm
6
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual
the words “left” and “right” are used to refer to the product and its parts. As
such, these designations correspond to the “left” and “right” sides of a person
in position to exercise on this product. Also, for brevity, the word “screws” is
used where screws, washers, and other hardware may be involved.
STEP 1 Install the Seat Support and Connector
First, remove nuts (30) from the curved connecting plate (A10) and align the
seat support (A2) and the connector (A3) to the holes in the right frame
(A1) and left frame (A4), then loosely secure the assembly with the curved
connecting plate (A10) and nuts (30) as shown. Do not tighten nuts yet.
7
STEP 2 Install the Seat Frame and Handlebar
(a) First, remove screws (31) from the seat frame (A5).
(b) Attach the handlebar (A6) onto the seat frame (A5) where the screw
holes align. Secure the assembly with screws (31) as shown.
(a)
(b)
8
STEP 3 Install the Seat Frame
First, remove nuts (30) from the curved connecting plate (A10) and then
align the seat frame (A5) to the holes in the right frame (A1) and left frame
(A4), then secure the assembly with screws (32). Finally, secure the curved
connecting plate (A10) with screws (30) as shown.
9
STEP 4 Install the Cylindrical Cushion
(a) First, remove screws (33) from the left frame (A4).
(b) Insert the cylindrical cushion (A9) onto the left frame (A4). Secure it in
place with screws (33) and then apply the round sticker (10) as shown.
(Note: Follow the same procedure to install the cylindrical cushion onto the
right frame.)
(a)
(b)
10
STEP 5 Install the Seat Back
(a) First, remove screws (34) and the seat back plate from the seat back (A7)
and then remove screws (35) from the seat frame (A5).
(b) Secure the seat back plate to the seat frame (A5) with screws (35).
(c) Finally, secure the seat back (A7) to the seat back plate with screws (34).
(a) (b)
(c)
11
STEP 6 Install the Seat Bottom
First, remove screws (34) from the seat bottom (A8) and then use screws
(34) to secure the seat bottom (A8) to the main frame as shown.
12
STEP 7 Install the Weight Plate Pegs
(a) First remove screws (37) from the weight plate pegs (A11).
(b) Loosen screws (38) from the left frame (A4). Install weight plate pegs
(A11) onto the left frame (A4). Finally, fully tighten the whole assembly
with screws (37) (38).
(Note: Follow the same procedure to install the weight plate pegs (A11) onto
the right frame (A4).)
(a)
(b)
13
(c)
STEP 8 Secure the Unit
Secure the floor fixing bracket to the floor with the floor fixing bolt, nut and
washer as shown.
(Note: The screw hole of floor fixing bracket is Ø9mm, please make sure
using the suitable floor fixing bolt and drilling the proper hole on the floor.)
14
STEP 9 Unit Inspection
After completing the assembly or regular maintenance, please follow instruc-
tions (a) through (c) below to inspect the unit. If the unit is disassembled or
has been damaged in any way, it might cause injuries or cause the unit to fail.
(a) Make sure the unit is steady and on a level surface. If the unit is not
steady, make adjustments according to the instructions “Level the Unit”
of this manual.
(b) Make sure all parts are assembled and all fasteners are tightened.
(c) Please follow operating instructions to test operation and conrm that
the equipment is working properly. (Please refer to “Operate the Product”
of this manual.)
15
5. OPERATE THE PRODUCT
This section includes operational instructions.
OPERATION Safety Operating Area
(a) Safety clearance required as shown below. Do not allow people to be
near this area when operating.
(b) Noise emission under load is higher than without load.
(c) Over exercising or improper workout position may result in serious injury.
(d) This product is intended for exercise legs.
16
OPERATION Operate the Product
(a) Select the appropriate weight plates placed on both sides of the weight
plate pegs, and then secure the weight plates with safety clamps.
(b) Adjust the seat support and cylindrical cushions to the most comfortable
position and make sure the knob is engaged to secure the position.
(c) Inhale while the extending legs straight, exhale slowly back to the original
position.
*Note: While operating the machine, if the weight plate is moving around.
Please stop immediately, re-position the weight plate before
continuing.
* Weight limit: weight plate limit of 250Kg
* Please exercise within the range of your skill and training.
* Operate this machine must be supervised under coaches instructions in
order for safety.
17
OPERATION Operating the Product (Continued)
* To move the seat back position toward yourself, simply pull it. To move the
seat back away from yourself, pull the knob and press the seat back.
18
6. MAINTENANCE
This section covers maintenance topics and includes a maintenance
schedule, task list, and log.
MAINTENANCE Safety Precautions
●Please follow standard safety precautions when servicing this product.
●Do NOT use a water damp towel to clean the product and do perform the
following maintenances.
●Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-
cals. The use of such chemicals can damage the product and void the war-
ranty. Never spray or pour any liquid directly onto the product. Doing so can
damage components and void the warranty.
●Use a clean, lint-free towel, dampened with a mixture of Simple Green®
all-purpose cleaner, to thoroughly clean the handlebar and the console.
●This product has moving parts that can be hazardous. Exercise caution
when maintaining, operating, or moving this product.
● Do not use accessories or parts that are not specically recommended
by the manufacturer (SportsArt) . Such parts might cause injuries or cause
the unit to fail and void the warranty. We are not responsible for any safety
issue that arises due to the misuse of accessories or parts. At the same
time, we will terminate the warranty terms of this equipment.
●Maintenance and repair must be performed by trained service personnel
only. Improper maintenance would not only damage the machine, but may
also present a danger to the exerciser.
●Keep this product out of use until maintenance is completed.
19
MAINTENANCE Schedule
Area Day Week Month Quarter Year Notes
1 Exterior ●Clean.
2 Screws ●Inspect for looseness
and secure if necessary.
3 Test ●Check for proper
equipment operation.
4 Cushions ●Wipe with a damp cloth.
20
MAINTENANCE Task List
Like cars, fitness products require maintenance. Regular maintenance ex-
tends product life, and failure to maintain products can void the manufac-
turer’s warranty. Copy the maintenance log sheet, and record maintenance
work for each fitness product.
Daily tasks
1. Use a clean, lint-free towel to wipe down the product exterior.
2. Inspect all screws. Secure if necessary.
3. Make sure the machine is working properly.
4. Wipe cushions clean with a damp cloth.
Caution
●Please follow standard safety precautions when servicing this product..
●Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-
cals. The use of such chemicals can damage the product and void the war-
ranty. Never spray or pour any liquid directly onto the product. Doing so can
damage components and void the warranty.
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
SportsArt A976 Le manuel du propriétaire
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: SportsArt A976 Owner's manual