LG 32LM620BPUA Le manuel du propriétaire

www.lg.com

Printed in Korea

LED TV*

OWNER’S MANUAL

* LG LED TV applies LCD screen with LED backlights.

Safety and Reference

Please read this manual carefully before operating

your set and retain it for future reference.

32LM630BPUB

32LM6350PUA

43LM6300PUB

32LM620BPUA

32LM570BPUA

43LM5700PUA

43LM5700DUA

*MFL71440403*

(1912-REV03)

2

ENGLISH

Important Safety Instruction

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus.

• Only use attachments/accessories specied by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not

limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration

agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/

arbitration (Canada).

3

ENGLISH

Warning! Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of

uninsulated dangerous voltage within the product’s

enclosure that may be of sucient magnitude to constitute a risk

of electric shock to persons.

The symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the device.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS

WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• Do not place the TV and/or remote control in the following

environments:

- Keep the product away from direct sunlight.

- An area with high humidity such as a bathroom.

- Near any heat source such as stoves and other devices that

produce heat.

- Near kitchen counters or humidiers where they can easily be

exposed to steam or oil.

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and do not place objects

lled with liquids, such as vases, cups, etc. on or over the

apparatus (e.g., on shelves above the unit).

- Near ammable objects such as gasoline or candles, or expose

the TV to direct air conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in re, electric shock, combustion/

explosion, malfunction or product deformation.

• Ventilation

- Install your TV where there is proper ventilation. Do not install in

a conned space such as a bookcase.

- Do not install the product on a carpet or cushion.

- Do not block or cover the product with cloth or other materials

while unit is plugged in.

• Take care not to touch the ventilation openings. When watching

the TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon.

Pay particular attention to plugs, wall outlets, and the point where

the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely tting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not

pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as

this could result in re or electric shock.

• Disconnecting the Device from the Main Power

- The power plug is the disconnecting device. In case of an

emergency, the power plug must remain readily accessible.

• Do not let your children climb or cling onto the TV. Otherwise, the

TV may fall over, which may cause serious injury.

• Outdoor Antenna Grounding (Can dier by country):

- If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits,

or where it can come in contact with such power lines or circuits

as death or serious injury can occur.

Be sure the antenna system is grounded to provide some

protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in the U.S.A.

provides information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code,

ANSI/NFPA 70

4

ENGLISH

• Grounding (Except for devices which are not grounded.)

- TV with a three-prong grounded AC plug must be connected to

a three-prong grounded AC outlet. Ensure that you connect the

earth ground wire to prevent possible electric shock.

• Never touch this apparatus or antenna during a lightning storm.

You may be electrocuted.

• Make sure the power cord is connected securely to the TV and wall

socket if not secured damage to the Plug and socket may occur and

in extreme cases a re may break out.

• Do not insert metallic or inammable objects into the product. If a

foreign object is dropped into the product, unplug the power cord

and contact the customer service.

• Do not touch the end of the power cord while it is plugged in. You

may be electrocuted.

• If any of the following occur, unplug the product

immediately and contact your local customer service.

- The product has been damaged.

- If water or another substance enters the product (like an AC

adapter, power cord or TV).

- If you smell smoke or other odors coming from the TV.

- When lightning storms or when unused for long periods of time.

Even the TV is turned o by remote control or button, AC power

source is connected to the unit if not unplugged in.

• Do not use high voltage electrical equipment near the TV (e.g., a

bug zapper). This may result in product malfunction.

• Do not attempt to modify this product in any way without written

authorization from LG Electronics. Accidental re or electric shock

can occur. Contact your local customer service for service or repair.

Unauthorized modication could void the user’s authority to

operate this product.

• Use only an authorized attachments / accessories approved by

LG Electronics. Otherwise, this may result in re, electric shock,

malfunction, or product damage.

• Never disassemble the AC adapter or power cord. This may result in

re or electric shock.

• Handle the adapter carefully to avoid dropping or striking it. An

impact could damage the adapter.

• To reduce the risk of re or electrical shock, do not touch the TV

with wet hands. If the power cord prongs are wet or covered with

dust, dry the power plug completely or wipe dust o.

• Batteries

- Store the accessories (battery, etc.) in a safe location out of the

reach of children.

- Do not short circuit, disassemble, or allow the batteries to

overheat. Do not dispose of batteries in a re. Batteries should

not be exposed to excessive heat.

• Moving

- When moving, make sure the product is turned o, unplugged,

and all cables have been removed. It may take 2 or more people

to carry larger TVs. Do not press or put stress on the front panel

of the TV. Otherwise, this may result in product damage, re

hazard or injury.

• Keep the packing anti-moisture material or vinyl packing out of the

reach of children.

• Do not allow an impact shock, any objects to fall into the product,

and do not drop anything onto the screen.

• Do not press strongly upon the panel with a hand or a sharp

object such as a nail, pencil, or pen, or make a scratch on it. It may

causedamage to screen.

• Cleaning

- When cleaning, unplug the power cord and wipe gently with a

soft/dry cloth. Do not spray water or other liquids directly on the

TV. Do not clean your TV with chemicals including glass cleaner,

any type of air freshener, insecticide, lubricants, wax (car,

industrial), abrasive, thinner, benzene, alcohol etc., which can

damage the product and/or its panel. Otherwise, this may result

in electric shock or product damage.

5

ENGLISH

Preparing

• When the TV is turned on for the rst time after being shipped

from the factory, initialization of the TV may take approximately

one minute.

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

• The available menus and options may dier from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The device must be easily accessed to a location outlet near the

access. Some devices are not made by turning on / o button,

turning o the device and unplugging the power cord.

• The items supplied with your product may vary depending upon

the model.

• Product specications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7

inches) width.

• Use an extension cable that supports USB 2.0 if the USB cable or

USB ash drive does not t into your TV’s USB port.

• Use a certied cable with the HDMI logo attached. If you do not use

a certied HDMI cable, the screen may not display or a connection

error may occur.

• Recommended HDMI cable types (3 m (9.84 feet) or less)

- Ultra High Speed HDMI®/

TM

cable

A

B

A

B

*A

<

=

10 mm (0.39 inches)

*B

<

=

18 mm (0.7 inches)

• How to use the ferrite core, (Depending upon model).

- Use the ferrite core to reduce the electromagnetic interference in

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

3.9 inches (+ / - 0.7 inches)

Optional Extras

Optional extras can be changed or modied for quality improvement

without any notication. Contact your dealer for buying these items.

These devices work only with certain models.

The model name or design may be changed due to the manufacturer’s

circumstances or policies.

Magic Remote Control

(Depending upon model)

AN-MR19BA

Check whether your TV model supports Bluetooth in the Wireless

Module Specication to verify whether it can be used with the Magic

Remote.

Wall Mounting Bracket

(Depending upon model)

Make sure to use screws and wall mount bracket that meet the VESA

standard. Standard dimensions for the wall mount kits are described in

the following table.

A

B

Model

32/43LM57*

32LM62*

32/43LM63*

VESA (A x B) (mm)

200 x 200

Standard screw M6

Number of screws 4

Wall mount bracket (optional)

LSW240B

MSW240

6

ENGLISH

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV

from being scratched or damaged and for safe transportation regardless

of its type and size.

• It is recommended to move the TV in the box or packing material

that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and

all cables.

• When holding the TV, the screen should face away from you to

avoid damage.

• Hold the top and bottom of the TV frame rmly. Make sure not to

hold the transparent part, speaker, or speaker grille area.

• Use at least two people to move a large TV.

• When transporting the TV by hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV to jolts or

excessive vibration.

• When transporting the TV, keep the TV upright; never turn the TV

on its side or tilt towards the left or right.

• When handling the TV, be careful not to damage the protruding

buttons.

• Avoid touching the screen at all times, as this may result in

damage to the screen.

• Do not place the product on the oor with its front facing

down without padding. Failure to do so may result in

damage to the screen.

• When attaching the stand to the TV set, place the screen

facing down on a cushioned table or at surface to protect

the screen from scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

• Leave a minimum of 10 cm (4 inches) space from the wall for

proper ventilation.

10

cm

10

cm

10

cm

10

cm

10 cm

(4 inches)

(Depending upon model)

2 Connect the power cord to a wall outlet.

• Do not apply foreign substances (oils, lubricants, etc.) to

the screw parts when assembling the product. (Doing so

may damage the product.)

• If you install the TV on a stand, you need to take actions

to prevent the product from overturning. Otherwise, the

product may fall over, which may cause injury.

• Do not use any unapproved items to ensure the safety and

product life span.

• Any damage or injuries caused by using unapproved items

are not covered by the warranty.

• Make sure that the screws are fastened tightly. (If they

are not fastened securely enough, the TV may tilt forward

after being installed.)

• Do not fasten the screws with excessive force otherwise

they may strip and become loose.

7

ENGLISH

Securing TV to the Wall

(Depending upon model)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

• If there are bolts inserted at the eye-bolts position, remove the

bolts rst.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear

of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the at surface.

• Use a platform or cabinet that is strong and large enough to

support the TV securely.

• Brackets, bolts and ropes are not provided. You can obtain

additional accessories from your local dealer.

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult

with your local dealer for a wall mount that supports the VESA

standard used by your TV model. Carefully attach the wall mount

bracket at the rear of the TV. Install the wall mount bracket on a solid

wall perpendicular to the oor. If you are attaching the TV to other

building materials, please contact qualied personnel to install the

wall mount. Detailed instructions will be included with the wall mount.

We recommend that you use an LG brand wall mount. The LG wall

mount is easy to adjust or to connect the cables. When you do not use

LG’s wall mount bracket, use a wall mount bracket where the device is

adequately secured to the wall with enough space to allow connectivity

to external devices. If you are using a non-adjustable mount, attach the

mount to the wall. Attach the cables to the TV rst, then attach the TV

to the mount.

10

cm

10 cm (4 inches)

10

cm

10

cm

10

cm

(Depending upon model)

• Remove the stand before installing the TV on a wall

mount by performing the stand attachment in reverse.

• For more information of screws and wall mount bracket,

refer to the Separate purchase.

• If you intend to mount the product to a wall, attach VESA

standard mounting interface (optional parts) to the back

of the product. When you install the set to use the wall

mounting bracket (optional parts), x it carefully so as

not to drop.

• When mounting a TV on the wall, make sure not to install

the TV by hanging the power and signal cables on the

back of the TV.

• Do not install this product on a wall if it could be exposed

to oil or oil mist. This may damage the product and cause

it to fall.

8

ENGLISH

• When installing the wall mounting bracket, it is recommended to

cover the stand hole using tape, in order to prevent the inux of

dust and insects. (Depending upon model)

Stand hole

Connections

You can connect various external devices to the TV. For more

information on external device’s connection, refer to the manual

provided with each device.

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to

the following. The illustrations may dier from the actual items and an

RF cable is optional.

• Make sure not to bend the copper wire of the RF cable.

Copper wire

• Complete all connections between devices, and then connect the

power cord to the power outlet to prevent damage to your TV.

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG, Dolby Digital

Other connections

Connect your TV to external devices. For the best picture and audio

quality, connect the external device and the TV with the HDMI cable.

HDMI

•

When connecting the HDMI cable, the product and external devices

should be turned o and unplugged.

• HDMI Audio Supported Format:

(Depending upon model)

DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),

DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD

players, VCRs, audio systems, USB storage devices, PC, gaming devices

and other external devices. For more information on external device’s

connection, refer to the manual provided with each device.

• If you record a TV program on a Blu-ray/DVD recorder or VCR, make

sure to connect the TV signal input cable to the TV through a DVD

recorder or VCR. For more information about recording, refer to the

manual provided with the connected device.

• The external device connections shown may dier slightly from

illustrations in a manual.

• Connect external devices to the TV regardless about the order of

the TV port.

• If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

• Refer to the external equipment’s manual for operating

instructions.

9

ENGLISH

• In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present, change

the PC output to another resolution, change the refresh rate to

another rate or adjust the brightness and contrast on the [PICTURE]

menu until the picture is clear. Depending upon the graphics card,

some resolution settings may not allow the image to be positioned

on the screen properly.

• Some USB Hubs may not work. If a USB device connected through

a USB Hub is not detected, connect it directly to the USB port on

the TV.

• When connecting via a wired LAN, it is recommended to use a CAT

7 cable.

• The TV may be capable of operating without a set-top-box from a

multichannel video programming distributor (MVPD).

• For LM series, HDR (High Dynamic Range) pictures can be viewed

over the Internet or via USB and HDMI 1.4 compatible devices.

Remote RS-232C setup

To obtain the RS-232C external control setup information, please visit

ww w.lg.com. Download and read the manual. (Depending upon model)

• Do not drop the product or let it fall over when connecting

external devices. Otherwise, this may result in injury or

damage to the product.

• When connecting external devices such as video game

consoles, make sure the connecting cables are long

enough. Otherwise, the product may fall over, which may

cause injury or damage the product.

Using Button

You can simply operate the TV functions, using the button.

Basic functions

Power On (Press)

Power O

1

(Press and Hold)

Menu Control (Press

2

)

Menu Selection (Press and Hold

3

)

1 All running apps will close.

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust

the Menu items using the button.

Turns the power o.

Changes the input source.

Adjusts the volume level.

Scrolls through the saved channels.

10

ENGLISH

Using Remote Control

(Depending upon model)

The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.

To install batteries, open the battery cover, replace batteries (1.5 V AAA)

matching the and ends to the label inside the compartment,

and close the battery cover. To remove the batteries, perform the

installation actions in reverse. This remote uses infrared light. When in

use, it should be pointed in the direction of the TV’s remote sensor.

Make sure to point the remote control toward the remote control sensor

on the TV.

1 1

1

(Some buttons and services may not be provided depending upon

models or regions.)

** To use the button, press and hold for more than 1 second.

(POWER) Turns the TV on or o.

Returns to the last TV channel.

(SEARCH) Shows the search mode.

Activates or deactivates the subtitles.

(Q. Settings) Accesses the Quick Settings.

(INPUT) Changes the input source.

Number button Enters numbers.

**

Accesses the [QUICK HELP].

(DASH) Inserts a between numbers such as 2-1 and 2-2.

Accesses the saved channel list.

(MORE ACTIONS) Displays more remote control functions.

**

Edits QUICK ACCESS.

- QUICK ACCESS is a feature that allows you to enter a specied app

or Live TV directly by pressing and holding the number buttons.

Adjusts the volume level.

Accesses your favorite channel list.

Displays the program event according to time scheduler.

(MUTE) Mutes all sounds.

**

(MUTE) Accesses the [Accessibility] menu.

Scrolls through the saved channels.

Moves to the previous or next screen.

1

Streaming Service buttons Connects to the Video Streaming

Service.

(HOME) Accesses the Home menu.

**

(HOME) Shows the previous history.

Returns to the previous screen.

Clears all on-screen displays and returns to TV viewing.

Navigation buttons (up/down/left/right) Scrolls through menus

or options.

(OK) Selects menus or options and conrms your input.

Shows information on the current program.

Enables SAP (Secondary Audio Program) Feature.

Starts to record. (Only Time Machine

Ready

supported model)

, , , , Control buttons for media contents.

, , , These access special functions in some menus.

11

ENGLISH

• Do not mix new batteries with old batteries. This may

cause the batteries to overheat and leak.

• Failure to match the correct polarities of the battery

may cause the battery to burst or leak, resulting in re,

personal injury, or ambient pollution.

• This apparatus uses batteries. In your community there

might be regulations that require you to dispose of these

batteries properly due to environmental considerations.

Please contact your local authorities for disposal or

recycling information.

• Batteries inside or inside the product shall not be exposed

to excessive heat such as sunshine, re or the like.

User Guide

For more information about this TV, read the USER GUIDE embedded in

the product.

• To open the USER GUIDE ( ) [General] [About

This TV] [User Guide]

Troubleshooting

Cannot control the TV with the remote control.

• Check if anything such as tape has been placed over the receiver.

• Check if there is any obstacle between the product and the remote

control.

• Replace the batteries with new fresh ones.

No image display and no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

• Check the power control settings. The power supply may be

interrupted.

• Check if the auto-o function is activated in the settings menu.

• If there is no signal while the TV is on, the TV will turn o

automatically after 15 minutes of inactivity.

Abnormal Display

•

If the TV feels cold to the touch, there may be a small icker when

it is turned on. This is normal; there is nothing wrong with TV.

Some minute dot defects may be visible on the screen, appearing

as tiny red, green, or blue spots. However, they have no adverse

eect on the TV’s performance. Avoid touching the LCD screen or

holding your nger(s) against it for long periods of time. Doing so

may produce some temporary distortion eects on the screen.

• This panel is an advanced product that contains millions of pixels.

In a very few cases, you could see ne dots on the screen while

you’re viewing the TV. Those dots are deactivated pixels and do not

aect the performance and reliability of the TV.

• Displaying a still image for a prolonged period of time may cause

an image sticking. Avoid displaying a xed image on the TV screen

for a extended length of time.

Generated Sound

• Cracking noise

A cracking noise that occurs when watching or

turning o the TV is generated by plastic thermal contraction due

to temperature and humidity. This noise is common for products

where thermal deformation is required.

• Electrical circuit humming/panel buzzing A low level noise

is generated from a high-speed switching circuit, which supplies a

large amount of current to operate a product. It varies depending

upon the product. This generated sound does not aect the

performance and reliability of the product.

• When cleaning the product, be careful not to allow any

liquid or foreign objects to enter the gap between the

upper, left or right side of the panel and the guide panel,

(Depending upon model).

• Make sure to wring any excess water or cleaner from the

cloth.

•

Do not spray water or cleaner directly onto the TV screen.

• Make sure to spray just enough of water or cleaner onto a

dry cloth to wipe the screen.

12

ENGLISH

Specications

Product specications may be changed without prior notice due to upgrade of product functions.

Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).

The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).

(Depending upon country)

Broadcasting Specifications

Television system ATSC / NTSC-M, 64 & 256 QAM

Program coverage

(Band)

VHF 2 - 13, UHF 14 - 69, DTV 2 - 69, CATV 1 - 135, CADTV 1 - 135

External antenna

impedance

75 Ω

(Except for LM57*, LM62*, LM635*)

Wireless module (LGSBWAC92) Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range Output Power (Max.)

2,400 to 2,483.5 MHz

5,150 to 5,725 MHz

5,725 to 5,850 MHz

18 dBm

Bluetooth

Frequency Range Output Power (Max.)

2,400 to 2,483.5 MHz 8 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional

frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device

and the body.

FCC ID: BEJLGSBWAC92

IC: 2703H-LGSBWAC92

13

ENGLISH

(Only LM57*, LM62*, LM635*)

Wireless module (LGSWFAC81) Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range Output Power (Max.)

2,400 to 2,483.5 MHz

5,150 to 5,725 MHz

5,725 to 5,850 MHz

20 dBm

15 dBm

14.5 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional

frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device

and the body.

FCC ID: BEJLGSWFAC81

IC: 2703H-LGSWFAC81

Environment condition

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)

Storage Humidity Less than 85 %

14

ENGLISH

Open Source Software

Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source

licenses, that is contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM

for a charge covering the cost of performing such distribution (such

as the cost of media, shipping, and handling) upon email request to

[email protected]om.

This oer is valid for a period of three years after our last shipment of

this product. This oer is valid to anyone in receipt of this information.

Licenses

(Magic Remote supported models only)

Regulatory

-

15

ENGLISH

(1)

(2)

(3)

(4)

NOTE TO CABLE/TV INSTALLER

(For USA and Canada)

This reminder is provided to call the CATV system installer’s attention to

Article 820-40 of the National Electric Code (U.S.A.). The code provides

guidelines for proper grounding and, in particular, species that

the cable ground shall be connected to the grounding system of the

building, as close to the point of the cable entry as practical.

16

ENGLISH

WARNING!

Never place a television set in an unstable location. A television set may

fall, causing serious personal injury or death. Many injuries, particularly

to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the

television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the

supporting furniture.

• Not placing the television set on tall furniture (for example,

cupboards or bookcases) without anchoring both the furniture and

the television set to a suitable support.

• Not placing the television set on cloth or other materials that may

be located between the television set and supporting furniture.

• Educating children about the dangers of climbing on furniture to

reach the television set or its controls.

If your existing television set is being retained and relocated, the same

considerations as above should be applied.

Symbols

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;

1-888-542-2623 CANADA

1-800-243-0000 USA, Consumer User

1-888-865-3026 USA, Commercial User

Register your product Online!

www.lg.com

The model and serial number of the product

are located on the back and on one side of the

product. Record them below in case you ever need

service.

Model

Serial No.

Supplier's Declaration of Conformity

Trade Name LG

Responsible Party LG Electronics USA, Inc.

Address 1000 Sylvan Ave Englewood

Cliffs NJ 07632

TEL (201)266-2215

www.lg.com

TÉLÉVISEUR À DEL*

MANUEL D’UTILISATION

* Téléviseur à DEL de LG s’applique à l’écran ACL avec rétroéclairage à DEL.

Sécurité et références

Veuillez lire ce manuel attentivement avant d’utiliser l’appareil

et conservez-le pour pouvoir vous y reporter ultérieurement.

32LM630BPUB

32LM6350PUA

43LM6300PUB

32LM620BPUA

32LM570BPUA

43LM5700PUA

43LM5700DUA

2

FRANÇAIS

Directives de sécurité importantes

• Lisez ces directives.

• Conservez ces directives.

• Soyez attentif à tous les avertissements.

• Suivez toutes les directives.

• N’utilisez pas cet appareil près de l’eau.

• Nettoyez uniquement avec un linge sec.

• Ne bloquez pas les ouvertures d’aération. Installez l’appareil en respectant les directives du fabricant.

• N’installez pas l’appareil près de sources de chaleur comme les radiateurs, les bouches de chaleur, les fours et tout autre appareil (y compris les

amplicateurs) produisant de la chaleur.

• Ne contournez pas la fonction sécuritaire de la che polarisée ou de la prise de mise à la terre. Une che polarisée est munie de deux lames,

dont l’une est plus large que l’autre. Une che de mise à la terre comporte deux lames et une broche de mise à la terre. La lame la plus large ou

la broche de mise à la terre sont fournies pour votre sécurité. Si la che fournie ne s’insère pas dans votre prise, consultez un électricien pour la

remplacer.

• Protégez le cordon d’alimentation de manière à ce qu’il ne soit ni piétiné ni pincé, particulièrement près de la che, des prises de courant et du

point de sortie de l’appareil.

• N’utilisez que les articles ou les accessoires recommandés par le fabricant.

• Utilisez uniquement avec un chariot, un socle, un trépied ou une table recommandé par le fabricant ou vendu avec l’appareil. Si vous déplacez

l’appareil à l’aide d’un chariot, faites preuve de prudence an de prévenir les blessures causées par un basculement.

• Débranchez cet appareil pendant les orages électriques ou lorsqu’il n’est pas utilisé pendant de longues périodes.

• Conez l’ensemble des réparations à du personnel qualié. Une intervention est nécessaire dans les cas suivants: si la prise ou le cordon

d’alimentation est endommagé, si un liquide a été renversé sur l’appareil ou si des objets sont tombés dans l’appareil, si l’appareil a été exposé à

la pluie ou à l’humidité, si l’appareil ne fonctionne pas normalement ou s’il est tombé.

En utilisant ce produit, vous acceptez que tout diérend entre vous et LG en lien avec ce produit ou en découlant de quelque manière que ce soit

(y compris, sans toutefois s’y limiter, les diérends concernant la garantie) se règle exclusivement par arbitrage exécutoire au cas par cas. Les

modalités de l’entente d’arbitrage (y compris les détails sur la procédure de règlement des diérends) peuvent être consultées à

www.lg.com/us/arbitration (États-Unis) ou www.lg.com/ca_en/arbitration (Canada).

3

FRANÇAIS

Avertissement! Directives de

sécurité

MISE EN GARDE

RISQUE DE DÉCHARGE

ÉLECTRIQUE

NE PAS OUVRIR

MISE EN GARDE : AFIN DE RÉDUIRE LE RISQUE DE DÉCHARGE

ÉLECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU LE PANNEAU

ARRIÈRE). AUCUNE PIÈCE POUVANT ÊTRE RÉPARÉE PAR

L’UTILISATEUR NE SE TROUVE À L’INTÉRIEUR DE L’APPAREIL.

CONFIEZ L’ENTRETIEN DE CET APPAREIL À DU PERSONNEL

QUALIFIÉ.

Ce symbole a pour fonction d’alerter l’utilisateur de la

présence d’une tension dangereuse non isolée à l’intérieur

du boîtier de l’appareil qui pourrait être d’une puissance

susante pour causer une décharge électrique.

Ce symbole vise à alerter l’utilisateur de la présence de

directives d’utilisation et de maintenance (entretien)

importantes dans la documentation accompagnant l’appareil.

AVERTISSEMENT: AFIN DE RÉDUIRE LE RISQUE D’INCENDIE ET DE

DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CE PRODUIT À LA PLUIE

OU À L’HUMIDITÉ.

• POUR ÉVITER L’EXPANSION DU FEU, MAINTENEZ À TOUT MOMENT

CE PRODUIT LOIN DES BOUGIES OU D’AUTRES ÉLÉMENTS À

FLAMMES NUES.

• N’installez pas le téléviseur ni la télécommande dans les

environnements suivants:

- En exposition directe à la lumière du soleil.

- Dans une zone avec une forte humidité comme une salle de

bains.

- À proximité d’une source de chaleur comme une cuisinière et

tout autre appareil produisant de la chaleur.

- À proximité des comptoirs de cuisine ou des humidicateurs où

ils peuvent facilement être exposés à la vapeur ou à l’huile.

- Dans une zone exposée à la pluie ou au vent.

- Dans une zone où existe un risque de ruissellement ou

d’éclaboussure. Évitez de poser des objets contenant du liquide,

comme des vases, des tasses, etc., sur l’appareil ou au-dessus de

celui-ci (par exemple, sur une tablette).

- À proximité d’objets inammables comme de l’essence ou

des bougies, ou en exposition directe avec un système de

climatisation.

- Dans un endroit très poussiéreux.

Cela pourrait entraîner des risques d’incendie, de décharge

électrique, de combustion ou d’explosion, de mauvais

fonctionnement ou d’altération du produit.

• Aération

- Installez votre téléviseur à un endroit où l’aération est susante.

Ne l’installez pas dans un espace restreint comme une

bibliothèque.

- N’installez pas le produit sur un tapis ou un coussin.

- N’obstruez pas les ouvertures de l’appareil et ne le recouvrez pas

avec du tissu ou tout autre matériau lorsqu’il est branché.

• Prenez soin de ne pas toucher aux ouvertures d’aération.

Lorsque le téléviseur fonctionne pendant une longue période, les

ouvertures d’aération peuvent devenir chaudes.

• Protégez le cordon d’alimentation contre les dommages

physiques ou mécaniques. Veillez notamment à ce qu’il ne soit pas

tordu, déformé, pincé, coincé dans une porte ou piétiné. Soyez

particulièrement attentif aux ches, aux prises de courant murales

et à l’emplacement de sortie du cordon sur l’appareil.

• Ne déplacez pas le téléviseur lorsque le cordon d’alimentation est

branché.

• N’utilisez pas un cordon d’alimentation endommagé ou desserré.

• Assurez-vous de bien saisir la che lorsque vous débranchez le

cordon d’alimentation. Ne tirez pas sur le cordon d’alimentation

pour débrancher le téléviseur.

• Ne branchez pas trop d’appareils dans une même prise de courant

alternatif, car cela pourrait causer un incendie ou une décharge

électrique.

• Débranchement de l’appareil de la source d’alimentation

principale

- La che d’alimentation permet d’eectuer le débranchement. La

che d’alimentation doit rester accessible en tout temps an de

pouvoir débrancher l’appareil en cas d’urgence.

• Ne laissez pas vos enfants grimper sur le téléviseur ou s’agripper

dessus. Autrement, le téléviseur pourrait tomber et causer des

blessures graves.

• Mise à la terre d’antennes extérieures (peut varier selon le

pays) :

- Si une antenne extérieure est installée, prenez les précautions

ci-dessous.

Un système d’antennes extérieures ne devrait pas se trouver

à proximité des lignes aériennes d’électricité, d’autres circuits

électriques d’éclairage ou d’alimentation, ou à un endroit où il

peut entrer en contact avec de telles lignes électriques ou de

tels circuits d’alimentation; cela pourrait entraîner de graves

blessures ou un décès.

Assurez-vous que le système d’antenne est mis à la terre

an qu’il soit protégé dans une certaine mesure contre les

surtensions et les accumulations d’électricité statique.

L’article 810 du Code national de l’électricité (NEC) des États-

Unis fournit des renseignements relatifs à la procédure conforme

de mise à la terre du mât et de la structure d’appui ainsi que de

mise à la terre du câble de connexion au dispositif de décharge

de l’antenne, en plus de renseignements relatifs au format des

conducteurs de terre, à la position du dispositif de décharge

de l’antenne, au branchement des électrodes de masse et aux

exigences de mise à la terre de l’électrode.

Mise à la terre de l’antenne selon le Code national de l’électricité,

ANSI/NFPA 70

La page charge ...

LG 32LM620BPUA Le manuel du propriétaire

Ce manuel convient également à

LG 32LM620BPUA Le manuel du propriétaire

dans d''autres langues

Autres documents