Westinghouse WTH-28EF12A2 WiFi Link Remote Control Manuel utilisateur
- Catégorie
- Cheminées
- Taper
- Manuel utilisateur
Flame color eect
Timer to turn o the fireplace
ember bed color eect
Setting the flame speed
Adjust the temperature
Select the
function mode,
the function
light flashes,
select the
required
parameters up
and down for
the current
function, wait
for the
controller to
turn o the
light, and exit
the current
selection mode.
Alternatively,
press other
function keys to
access other
functions.
UP
DOWN
The default mode up and down keys can directly adjust the temperature
Remote control 2.Remote control function selection mode, up and down selection
select
12
Turn on switch button first 10S
10S
WIFI
WIFI 2.4G
WIFI
***
***
The WIFI indicator light in distribution mode flashes, displaying "P-0" Add WIFI
network and mobile app for network distribution.Turn on Bluetooth and WIFI
APP
Scan
WIFI
Google Play and
App Store for
Android and IOS
Search“Westingh
ouse Butler"
Install the App
or
Registration process
1, open the “Westinghouse Butler" app, click register, start registration
2, enter your email address and fill in the verification code
3, set your login password
4, enter the app page to open the settings page, allow nearby devices and location
NOTE:（This permission is disabled will not be able to use the app to control the fireplace）
Note: Please make sure the wireless network and the Bluetooth function of the cell phone are turned on before
networking.
open the app to enter the home page, click add device app will automatically search for fireplace, click add
fireplace.(or Scan Code Add)
the device network successfully "fireplace control page icon”
WIFI lINK CONTROL
Fireplace networking process
WIFI
13
Alexa Link and Voice Control
Alexa Link and Voice Control
1. Your Smart Home Skills
2. Enable smart home skills to discover devices andscenes Alexa can control.Enable
Smart Home Skills
3. Search for “westinghouse”.
4. “Westsmart” ENABLE TO USE.
5. Associated “ Westinghouse Butler”account.
6. Alexa is looking for devicesto connect
7. device found andconnected
8. heater is set up and ready touse
Alexa +
Special statement: The content on this material has been carefully checked, if there are typographical errors and omissions and
content In case of misunderstanding, the company reserves the right of final interpretation.
** If the product is technically improved, without notice, the appearance and color of the product are changed The thing prevails.
14
For Both FCC & IC application:
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est
susceptible d'en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
MPE Requirements
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained
between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
Les antennes installées doivent être situées de facon à ce que la population ne puisse y être exposée à une
distance de moin de 20 cm. Installer les antennes de facon à ce que le personnel ne puisse approcher à 20
cm ou moins de la position centrale de l’ antenne.
La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au moins 20 cm des
personnes pendant son functionnement.
15
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF. Wait 5 minutes.
3. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If there
are, use a vacuum to clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord back into the outlet.
5. If the problem continues, have your outlet and wiring inspected by a professional.
Remote Control Battery Information
Excluding batteries, Prepare yourselfWith 2x AAA batteries.
NOTE: Remote control battery used depends on the remote control type which selected above.
NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion.
Dispose of batteries at your local hazardous material processing center.
CARE AND MAINTENANCE
Cleaning
NEVER immerse in water or spray with water. Doing so could result in electric shock, fire,
or personal injury.
Metal:
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Glass:
•Use a good quality glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
•NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
NOTICE
1 When the heater is first turned on, a slight odor may be odor may be present. This is normal
and should not occur again unless the heater is not used for a long period of time.
NOTICE 2
To improve operation, aim the remote control at the front of the fireplace. DO NOT press
the buttons too quickly.Give the unit time to respond to each command.
ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning,
performing maintenance, or moving this fireplace. Failure to do so could result in electric shock,
fire, or personal injury.
16
Vents:
•Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
•Clean the exterior of the fireplace with a slightly damp cloth or duster.
Maintenance
Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning,
performing maintenance, or moving this fireplace. Failure to do so could result in electric shock,
fire, or personal injury.
Electrical and Moving Parts:
•The fan motors are lubricated at the factory and will not require lubrication.
•Electrical components are integrated in the fireplace and are not serviceable by the consumer.
Storage:
•Store heater in a clean dry place when not in use.
WARNING! No other servicing should be performed by the consumer. Do not attempt to service
the unit yourself.
Troubleshooting
WARNING
DISCONNECTED THE APPLIANCE COMPLETELY AND LET COOL PRIOR TO ANY SERVICE.
ONLY A QUALIFIED SEVICE PERSON SHOULD SERVICE AND PEPAIR THIS ELECTRIC APPLAINCE.
PROBLEM POSSIBLE CAUSE SOLUTION
Fireplace turns off and
will not turn on.
1.Fireplace has overheated and
safety devise has caused thermal
switch to disconnect or home circuit
breaker has opened.
1.Reset switch by turning main power
off and waiting turning it back on or
breaker circuit breaker.
Flame is not moving. 1. Loose wiring.
2. Flame motor defective.
3. Flame rod out of place.
1.Inspect wiring for loose connections.
2. Call a qualified service technician to replace
flame motor.
3. “Flame Rod” out of place due to rough transit/
handing of the product. This issue can be
corrected as simple as removing the glass,
flipping the fireplace upside and down,
removing a set of screws that are holding the
bottom frame plate and placing the flame rod
back into place.
17
Flame is not visible. 1.Wiring is loose.1. Disconnect from power source and
inspect wiring for loose connections and
repair or replace if necessary.
2. Push the flame button to high.
Log set and /or is not
glowing. 1. Wiring is loose.
2. Ember is off mode.1.Disconnect from power source and
inspect wiring for loose connections and
repair or replace if necessary.
Remote control does
not work.
1. Low batteries.
2. Not aiming control correctly.
3. Defective remote control and /
or sensor.
1. Replace batteries in remote
control.
2. Aim control at sensor located
directly behind glass screen in center of
unit just above logs.
3. Replace remote control and/or
sensor.
120VAC 60Hz 1500W
Electrical schematic
18
CONTACT US :fireplace@westinghouse.cn
Returns
The return policy refers to products purchased directly from Westinghouse
Fireplace. Reseller sales are subject to respective policies of the seller
NOTE: Return policies refer to westinghouse fireplace direct purchases. Reseller
sales are subject to respective policies of the seller
Electric Fireplace Return Policies
•If an order arrives damaged, defective or incomplete, please contact
firep[email protected]
•If a product is concealed damaged or defective after (14) days of delivery, the
product will be processed under its warranty.
•Westinghouse fireplace does not accept returns for refunds due to customer
regret thirty (30) days after delivery.
•For fireplaces returned in original packaging and in saleable condition, thirty
(30)days from the date of delivery, the customer may regret.
•Human damage is not covered by the return warranty .
•Return shipping costs are the responsibility of the consumer.
Warranty
•2 year warranty (2 year full replacement) .
•Replacement of any non-functioning electronic parts.
Customer Support
19
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Westinghouse WTH-28EF12A2 WiFi Link Remote Control Manuel utilisateur
- Catégorie
- Cheminées
- Taper
- Manuel utilisateur
