Sony PS2 SCPH-75004 Mode d'emploi

GB

FR

IT

DE

2-650-066-32(1)

Instruction Manual

Mode d'emploi

Manuale di istruzioni

Bedienungsanleitung

SCPH-75004

Before using this product, carefully read this manual and retain it for future reference.

Avant d'utiliser cette console, lisez attentivement ce mode d'emploi et conservez-le pour pouvoir vous y reporter ultérieurement.

Prima di utilizzare questo prodotto, leggere attentamente questo manuale e conservarlo per un futuro riferimento.

Lesen Sie diese Bedienungsanleitung vor Inbetriebnahme der Konsole bitte genau durch und bewahren Sie sie zum späteren Nachschlagen sorgfältig auf.

2

WARNINGS

To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

To prevent fire or shock hazard, do not place a container filled

with liquids on top of the console.

To avoid electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

Caution

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

The use of optical instruments with this product will increase

eye hazard.

This appliance is classified as a CLASS 1 LASER product under IEC60825-1: 2001.

This equipment has been tested and found to comply with the

limits set out in the EMC Directive using a connection cable

shorter than 3 metres (9.8 feet).

Read carefully before operating your

PlayStation®2 console

A few people may experience epileptic seizures when viewing flashing lights or

patterns in our daily environment. These persons may experience seizures while

watching TV or playing video games, including DVD-Videos or games played on

the PlayStation®2 console. Players who have not had any seizures may nonetheless

have an undetected epileptic condition. Consult your physician before operating the

PlayStation®2 console if you have an epileptic condition or experience any of the

following symptoms while watching TV programmes or playing video games:

altered vision, muscle twitching, other involuntary movements, loss of awareness of

your surroundings, mental confusion, and/or convulsions.

Some PlayStation® or PlayStation®2 format software titles may perform differently

on this console than they do on previous PlayStation®2 or PlayStation® consoles, or

may not perform properly on this console. For more information, visit our Web site

at www.playstation.com

Where you see this symbol on any of our electrical products or packaging, it indicates

that the relevant electrical product should not be disposed of as general household

waste in Europe. To ensure the correct waste treatment of the product, please dispose

of it in accordance with any applicable local laws or requirements for disposal of

electrical equipment. In so doing, you will help to conserve natural resources and

improve standards of environmental protection in treatment and disposal of electrical

waste.

WARNINGS

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

3

Table of contents

GB

WARNINGS .................................................................................. 2

Precautions.....................................................................................4

Preparation

Getting started................................................................................ 7

Part names...................................................................................... 8

Connecting to a TV........................................................................ 9

Connecting digital audio equipment ............................................12

Connecting the controller.............................................................12

Connecting the AC adaptor and AC power cord ......................... 13

Turning the console on and off .................................................... 14

Games

Playing a game............................................................................. 15

Using Memory Cards...................................................................18

Audio CDs

Playing an audio CD .................................................................... 20

DVDs

Watching a DVD.......................................................................... 22

Using the playback modes ........................................................... 26

Adjusting DVD player settings.................................................... 28

Main menu

Displaying the main menu............................................................35

Using the Browser screen.............................................................35

Using the System Configuration menu.........................................36

Using the Version Information screen..........................................39

Networking

Connecting to a network...............................................................42

Creating network settings.............................................................44

Additional information

Compatible software.....................................................................45

Accessories...................................................................................46

GUARANTEE..............................................................................47

Specifications ...............................................................................48

Troubleshooting............................................................................50

Table of contents

4

Precautions

This product has been designed with the highest concern for safety. However, any

electrical device, if used improperly, has the potential for causing fire, electrical

shock or personal injury. To help ensure accident-free operation, follow these

guidelines:

• Observe all warnings, precautions and instructions.

• Stop use and unplug the AC power cord from the electrical outlet immediately if

the device functions in an abnormal manner or produces unusual sounds or smells.

• Contact the appropriate PlayStation® customer service helpline which can be

found within every PlayStation® and PlayStation®2 format software manual if the

device does not operate properly.

Safety

• Do not remove the console exterior or disassemble the console. The laser beam

emitted from the lens of this unit may be harmful to the eyes.

• Do not use the console near water.

• Keep the console and all connecting cords and cables out of the reach of children.

• Do not touch the plug of the AC power cord with wet hands.

• Do not touch the console or connected accessories during an electrical storm.

• Do not touch the console or AC adaptor for extended periods of time while the

console is turned on as extended contact may cause low-temperature burns.

• Do not place the console and connected accessories on the floor or in a place where

they may cause persons walking by to trip or stumble.

• Adjust the settings of the DVD player according to the instructions provided before

playing a DVD. If the settings are not correct, a loud sound may be emitted,

possibly injuring your ears or damaging the speakers.

• Do not touch a disc while it is spinning as personal injury or damage to the disc

may result.

• Do not close the disc cover in a way that could pinch your hand or fingers as

personal injury or damage to the console may result.

Health

• Stop using the console immediately if you experience any of the following

symptoms. If the condition persists, consult a doctor.

– Lightheadedness, nausea, or a sensation similar to motion sickness

– Tired, uncomfortable or aching hands or arms

– Tired, dry or aching eyes

• When operating the unit, play in a well-lit room and keep a safe distance from the

TV screen.

• Avoid prolonged use of the console. Take a break of about 15 minutes during every

hour of play.

• Do not use the console when you are tired or short of sleep.

• Listening to sound continuously for a long time with a high volume may adversely

affect the ears. Be careful especially when using headphones. Adjust the volume

so that surrounding sounds can be heard.

Precautions

5

Precautions

GB

Use and handling

• Do not throw or drop the console or accessories, or expose them to strong physical

shock.

• Do not place the console or accessories on surfaces that are unstable, tilted or

subject to vibration.

• Do not expose the console or accessories to high temperatures, high humidity or

direct sunlight (use in an environment where temperatures range from 5 °C to

35 °C).

• Do not place the console or accessories in locations subject to sudden temperature

change (for example, changes of 10 °C per hour or more).

• Do not leave the console or accessories in a car with its windows closed

(particularly in summer).

• Do not place the console in locations of poor ventilation such as small, enclosed

areas, directly against a wall or on a thick carpet or bedding.

• Do not expose the console to dust, smoke or steam. This can cause the console to

malfunction.

• Do not allow liquid or small particles to get into the console.

• Do not put any objects on the console.

• Do not touch or insert foreign objects into the connectors of the console or

accessories.

• Do not place the console close to magnetic fields produced by magnets or

loudspeakers.

• Do not set the console other than in the vertical or horizontal position. When

placing in the vertical position, use the Vertical Stand (for PlayStation®2) (sold

separately) that is compatible with this console. Also, do not change the position

while the console is turned on.

AC adaptor and AC power cord use

• To help ensure safe operation, regularly inspect the AC adaptor and AC power

cord. If damaged, stop use immediately and contact the appropriate PlayStation®

customer service helpline which can be found within every PlayStation® and

PlayStation®2 format software manual.

• Do not use a power cord other than the supplied AC adaptor and AC power cord.

• Check that there is no dust or lint on the power plug before inserting into an

electrical outlet. If the plug becomes dirty, wipe it off with a dry cloth before

connecting.

• Unplug the AC power cord from the electrical outlet before cleaning or moving the

console, or when you do not intend to use the console for an extended period of

time. When disconnecting, grasp the power cord by the plug and pull straight out

of the electrical socket. Never pull by the cord and do not pull out at an angle.

• Do not connect the AC adaptor and/or AC power cord to a voltage transformer or

inverter.

Notes on safety when using the Analog Controller

(DUALSHOCK®2)*

• Stop using the console immediately if you begin to feel tired or if you experience

discomfort or pain in your hands or arms while operating the Analog Controller

(DUALSHOCK®2). If the condition persists, consult a doctor.

• The Analog Controller (DUALSHOCK®2) is intended for use with the hands only.

Do not bring it into contact with your head, face or the bones of any other part of

the body.

• The vibration function of the Analog Controller (DUALSHOCK®2) can aggravate

injuries. Do not use the vibration function if you have any ailment or injury to the

bones, joints or muscles of your hands or arms. Note that some PlayStation®2 and

PlayStation® format software titles set the vibration function to "On" by default. In

most cases, the vibration function can be set to "Off" in the options menu of the

software. Do not play such titles using the Analog Controller (DUALSHOCK®2)

unless you have set the vibration function to "Off".

• Avoid prolonged use of the Analog Controller (DUALSHOCK®2). Take a break

at about 30-minute intervals.

* These notes also apply to other controllers.

6

Precautions

Connecting with a network cable

Do not connect network cables or telephone cords of the following types to the

network connector:

• Standard residential telephone lines

• Network cables not appropriate for use with a 10Base-T/100Base-TX network

• Any ISDN (digital) compatible phone or data line

• PBX phone lines

• Other "unknown" types of telephone lines

Disc handling

• Do not touch the disc surface when handling a disc; hold it by the edges.

• Do not stick paper or tape onto discs and do not write on discs.

• Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce

sound quality. Always handle carefully and make sure discs are clean before use.

• Do not leave discs near a heat source, in direct sunlight or in high humidity.

• Store discs in their cases when not in use - scratched and damaged discs will not

function correctly.

• Clean discs using a soft cloth, lightly wiping from the centre outwards.

Do not use solvents such as benzine, commercially available cleaners not intended

for CDs or anti-static spray intended for vinyl LPs.

• Do not leave a disc in the console when moving or changing the position of the

console.

• Do not use irregularly shaped discs (for example, heart- or star-shaped discs) or

damaged, re-shaped or repaired discs.

Never disassemble the console or supplied accessories

Use the PlayStation®2 console and accessories according to the instructions in this

manual. No authorisation for the analysis or modification of the console, or the

analysis and use of its circuit configurations, is provided. There are no user-

serviceable components inside the PlayStation®2 console. Disassembling the

console will void the guarantee. Additionally, there is a risk of exposure to laser

radiation as well as to electrical shock hazards.

When connecting the console to a plasma or projection* TV

Do not leave a still image on the TV screen for an extended period of time, as this

may leave a faint image permanently on the screen.

* Except LCD screen types

Moisture condensation

If the console or disc is brought directly from a cold location to a warm one, moisture

may condense on the lens inside the console or on the disc. Should this occur, the

console may not operate properly. In this case, remove the disc and turn off and

unplug the console. Do not put the disc back in until the moisture evaporates (this

may take several hours). If the console still does not operate properly, contact the

appropriate PlayStation® customer service helpline which can be found within every

PlayStation® and PlayStation®2 format software manual.

Cleaning

• For safety reasons, before cleaning the console or connected accessories, 1) turn

off the console, 2) disconnect the power plug for the console from the electrical

outlet, and 3) remove the network cable from the network connector.

• When cleaning the console, use a soft, dry cloth. Do not use paint thinner, solvents,

other chemicals or a chemically-treated dust cloth to clean the product.

• When dust accumulates in the console vents, remove the dust with a low-powered

vacuum cleaner.

• Do not touch the lens located inside the disc cover. To help protect the lens from

dust, keep the disc cover closed except when inserting or removing discs.

Exterior protection

To help prevent damage to the painted parts, follow the precautions below:

• Do not spill liquids such as alcohol, benzine, paint thinner or other chemicals on

the product.

• Do not place any rubber, vinyl or plastic items on the painted surfaces for an

extended period of time.

7

Getting started

Preparation

GB

Check that you have all of the following items. If any items are missing,

contact the appropriate PlayStation

® customer service helpline which can

be found within every PlayStation

® and PlayStation®2 format software

manual.

You can place the console in either the horizontal or vertical position.

Horizontal position

Set the console horizontally.

Vertical position

When setting the console in the vertical

position, use the SCPH-70110 E Vertical

Stand (for PlayStation

®2) (sold separately).

Note

Some Vertical Stands (for PlayStation®2) cannot be used with this model of the

PlayStation®2 console ( page 46). Choose the SCPH-70110 E when purchasing a

Vertical Stand.

Preparation

Getting started

Checking the package contents

s PlayStation®2 console...1 s Analog Controller

(DUALSHOCK

®2)...1

s AC adaptor...1

s AC power cord...1s Euro-AV connector plug...1

s AV Cable (integrated

audio/video)...1

s Instruction Manual...1

Positioning the console

8

Part names

Caution

Do not place the console in locations where it may be exposed to the following

conditions:

• Places subject to excessive cigarette smoke or dust. Cigarette smoke residue

or dust build-up on the internal components, such as the lens, may cause the

console to malfunction.

• Places subject to extreme temperatures, in direct sunlight, near a heat source,

or in a car with its windows closed (particularly in summer). These conditions

may warp the exterior of the console or cause the console to malfunction.

• Places close to magnetic fields, such as those produced by magnets or

loudspeakers.

• Places subject to vibration.

* The " " product family logo can be rotated to match the horizontal or vertical

positioning of the console.

Note

You can connect USB devices that are compatible with the PlayStation®2 console.

Note, however, that not all USB-compatible products work with the PlayStation®2

console. Refer to the instructions supplied with the device to be connected for more

information.

Part names

PlayStation®2 console front

RESET

Controller port 2

" " product family logo*

A (open) button

IR receiver

Front vent

USB connector

MEMORY CARD slot 2

MEMORY CARD slot 1

Controller port 1

]/1 (on/standby) indicator

]/1 (on/standby)/RESET button

Disc cover

9

Connecting to a TV

Preparation

GB

Note

For part names of the Analog Controller (DUALSHOCK®2), see "Using the Analog

Controller (DUALSHOCK®2)" ( page 17).

• Do not plug the AC power cord for the console into the electrical outlet

until you have made all other connections.

• Check that the TV is turned off.

Connect the console to the TV as shown below.

PlayStation®2 console rear

Rear vent

! DC IN 8.5V

connector

AV MULTI OUT connector

DIGITAL OUT (OPTICAL)

connector

NETWORK connector

Connecting to a TV

Before connecting

Connecting to a TV using the supplied AV Cable

VIDEO L-AUDIO-R

Audio and video inputs of the TV

Do not use when

connecting to a

monaural TV.

To the AV MULTI

OUT connector

AV Cable (integrated audio/video)

Console rear

White RedYellow

10

Connecting to a TV

Caution

If you display a still image on a plasma or projection* TV screen for an extended

period of time, "ghosting" may occur. This is a characteristic of these types of

TVs. Static, non-moving images, such as console setting menus, DVD menus or

paused images, may leave a faint image permanently on the TV screen if left on

for an extended time. Refer to the instructions supplied with your TV for details.

Note

The console can be connected to a VCR or an integrated TV/VCR. Note, however,

that if you play a DVD with copy-protection encryption, picture quality may be

reduced.

Connect your PlayStation®2 console to the Euro-AV connector (SCART)

on the TV using the Euro-AV connector plug and AV Cable (integrated

audio/video), making sure you match the colour-coded plugs of the AV

Cable to the matching jacks of the connector plug.

After connecting

Set your TV to the appropriate video input mode. Refer to the Instruction

Manual of your TV.

* Except those of LCD screen types

Connecting to a TV with a Euro-AV connector

using the Euro-AV connector plug

To Euro-AV

connector

To AV MULTI

OUT connector

Console rear

Euro-AV

connector plug

AV Cable (integrated audio/video)

11

Connecting to a TV

Preparation

GB

Picture quality differs depending on the type of cable used. Use the

information below to determine the best connection method.

If you use a cable sold separately, refer to the instructions supplied with the

cable.

Notes

• The DVD player's progressive scan mode is only available when playing a disc

recorded in NTSC format, and viewed on a TV that supports progressive scan

(480p).

• You cannot connect the console to a TV with component video inputs that are

exclusively for HDTV use (Y PB PR). Refer to the instructions supplied with your

TV for details.

When using cables sold separately

TV Cable type

A TV with S VIDEO inputs S VIDEO Cable (SCPH-10060 E)

A TV without video inputs RFU Adaptor (SCPH-10072 C)

A TV with Euro-AV (SCART)

connector

Euro-AV Cable (SCPH-10142)

A TV with component video

input connectors

Component AV Cable (for PlayStation®2)

(SCPH-10100 E)

Picture quality scale

High quality

x AV Cable (supplied) x S VIDEO Cable x Component AV Cable

This scale is intended only as a reference. Depending on the product or

condition of your TV, the picture quality may be different.

When using the Euro-AV Cable, picture quality may vary depending on your

TV's AV connection.

For optimum picture quality, connect your Euro-AV cable to an RGB-

compatible socket on your TV. Refer to the instructions supplied with your TV

for details.

x RFU Adaptor

12

Connecting digital audio equipment

By using a commercially available optical digital cable, you can enjoy

surround sound with the effect of being in a movie theatre or a concert hall.

When connecting the console to audio equipment with digital connectors,

refer to the instructions supplied with the device to be connected.

Notes

• If you connect the console to audio equipment using an optical digital cable, it may

affect the audio output of some PlayStation®2 format software with the result that

no sound is produced. If this happens, use a cable such as the supplied AV Cable

(integrated audio/video) and connect it to the console's AV MULTI OUT

connector. Do not use an optical digital cable.

• After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the

System Configuration menu. For details, see "Digital Out (Optical)" ( page 37).

1 Insert the Analog Controller (DUALSHOCK®2) into a controller

port of the console.

Note

Some software titles designate a specific controller port to be used. Refer to the

instructions supplied with the software for details.

Connecting digital audio

equipment

DIGITAL IN

OPTICAL

Console rear

Connected device

Commercially available optical

digital cable

Connecting the controller

MEMORY CARD

Console front

Analog Controller

(DUALSHOCK

®2)

13

Connecting the AC adaptor and AC power cord

Preparation

GB

Warnings

• The socket-outlet shall be installed near the equipment and shall be easily

accessible.

• Do not plug the AC power cord for the console into the electrical outlet until you

have made all other connections.

1 Connect the AC power cord to the AC adaptor.

2 Plug the connector of the AC adaptor into the ! DC IN 8.5V

connector on the console rear.

3 Plug the AC power cord into the electrical outlet.

The =/1 (on/standby) indicator on the console front will light up in red

to indicate that the console is in standby mode.

Connecting the AC adaptor and

AC power cord

AC adaptor

AC power cord

Console rear

AC adaptor

! DC IN 8.5V connector

Console rear

AC power cord

To the electrical outlet

Some regions and countries may

use a different electrical outlet

plug from the one illustrated.

RESET

Console front

]/1 indicator

14

Turning the console on and off

Do not turn on the console until you have finished these steps. Refer to the

instructions supplied with your TV for details.

• Turn on the TV.

• Change your TV setting to display output from the line to which the

console is connected.

1 Check that the =/1 (on/standby) indicator on the console

front is lit up in red.

2 Press the =/1 (on/standby)/RESET button on the console

front.

The =/1 indicator on the console front will turn green and output from

the console will be displayed on the TV.

Notes

• The first time you turn on the console after purchase, screens for setting

"Language", "Time Zone" and "Daylight Savings Time (Summer Time)" will be

displayed. Follow the on-screen instructions to complete the settings.

• If you connect the console to a wide-screen TV, set "Screen Size" in the System

Configuration menu ( page 37).

1 Press and hold the =/1/RESET button on the console front for

more than a second.

The =/1 indicator will turn red to indicate that the console has entered

standby mode.

Warning

The power is not completely turned off when the console is in standby mode. If

you do not plan to use the console for an extended period of time, unplug the

AC power cord from the electrical outlet.

Turning the console on and off

Before turning on the console

Turning on the console

RESET

Console front

=/1/RESET button

=/1 indicator

Turning off the console

RESET

Console front

=/1/RESET button

=/1 indicator

15

Playing a game

Games

GB

Check that the connections to the TV and audio equipment are correct and

that the precautions have been met.

• "Precautions" ( page 4)

• "Connecting to a TV" ( page 9)

• "Connecting the controller" ( page 12)

• "Connecting the AC adaptor and AC power cord" ( page 13)

Note

To play online games, you first need to connect to and set up a network. See

"Connecting to a network" ( page 42) for details.

1 Turn on the console ( page 14).

The main menu is displayed ( page 35).

2 Press the A (open) button on the console front.

The disc cover opens.

3 Place the disc in the console.

Set the disc in the disc holder with the label side facing up.

Games

Playing a game

=/1/RESET buttonA (open) button

Disc cover

Place the disc in the console with the label

side facing up.

Place the disc so that all three tabs

are above the disc's surface.

Before playing a game Starting a game

16

Playing a game

4 Close the disc cover.

Push the middle of the disc cover. After the disc cover is closed, the

game will start.

Notes

• You can also start a game from the Browser screen ( page 35).

• If you turn on the console after inserting a disc, the game will start automatically.

To reset a game

Press the \/1 (on/standby)/RESET button on the console front. Do not

accidentally press the @/1/RESET button while playing a game, as doing

so will cause the game to reset.

Caution

When removing a disc, check that the disc has stopped completely. Do not touch

the disc if it is spinning, as doing so may cause injury, damage to the disc or

console malfunction.

1 Press the A button on the console front.

2 Remove the disc.

Hold down the black centre part of the console, and then lift the disc

by the edges.

3 Close the disc cover.

4 Press the =/1/RESET button.

The main menu is displayed ( page 35).

Changing game discs

1 Open the disc cover and remove the disc.

When removing a disc, hold down the black centre part of the disc

holder and then lift the disc by the edges.

2 Insert a disc.

3 Close the disc cover and reset the console.

The new game will start.

Note

You do not need to turn off the console when changing games.

Ending a game

Push the middle of the disc cover.

Press the black centre part

of the disc holder.

17

Playing a game

Games

GB

The Analog Controller (DUALSHOCK®2) is equipped with a pressure-

sensitive button function. It also has a vibration function.

Part names

* The left and right analog sticks, or the L3 and R3 buttons, function only in analog

mode (indicator: red).

* The L3 and R3 buttons function when the analog sticks are pressed.

Note

Before using the Analog Controller

(DUALSHOCK®2), with the console turned on,

rotate the left and right analog sticks once with your

thumbs before starting a game. Do not twist the

analog sticks, but rotate as if drawing a circle as

shown in the diagram.

About mode switching

The ANALOG mode button can be used to switch between two modes.

Switch to the appropriate mode for use. Note, however, that some software

titles make this adjustment automatically.

Notes

• When using the Analog Controller in digital mode, the left and right analog sticks

do not function. Also, the pressure-sensitive button function is turned off.

• Depending on the software, you may not be able to switch modes even if you press

the ANALOG mode button.

About analog controls

• When playing a PlayStation®2 format software title, you can use all

buttons in analog mode except for the START, SELECT, L3 and R3

buttons.

• When playing a PlayStation

® format software title, only the left and right

analog sticks can be used in analog mode.

Note

Depending on the software, the buttons for use in analog mode may be limited. Refer

to the instructions supplied with the software for details.

About the vibration function

The vibration function can be set to ON or OFF in the software options

menu.

Note

Depending on the software, the vibration function may be set to "On" automatically.

Using the Analog Controller (DUALSHOCK®2)

SELECT button

L2 button

L1 button

Directional

buttons

Mode indicator

ANALOG mode button

START button

R2 button

R1 button

button

Right analog stick/ R3 button*

Left analog stick/ L3 button*

Digital mode

(indicator: off)

Analog mode

(indicator: red)

18

Using Memory Cards

You can use the Analog Controller (DUALSHOCK®) (SCPH-110 E) with

the PlayStation

®2 console, but the functions of the buttons in analog mode

may be different from those of the Analog Controller (DUALSHOCK

®2).

Only the left and right analog sticks can be used in analog mode.

Note

Not all PlayStation®2 format software titles support the use of the Analog Controller

(DUALSHOCK®) (SCPH-110 E). The Analog Controller (DUALSHOCK®2)

should be used in such cases.

You can save and load game data using a Memory Card. You can also

delete game data or copy game data from one Memory Card to another.

There are two types of Memory Cards. Select a Memory Card suitable for

the software in use.

Note

The Memory Card (8MB) (for PlayStation®2) uses "MagicGate", a technology that

helps protect copyrighted content through data encryption and hardware

authentication.

About using the Analog Controller (DUALSHOCK®)

(SCPH-110 E)

Using Memory Cards

About Memory Card types

Memory Card type Compatible software Amount of memory

Memory Card (8MB)

(for PlayStation®2)

(SCPH-10020 E)

PlayStation®2 format

software

Approx. 8 MB

Memory Card

(SCPH-1020 E)

PlayStation® format

software

15 memory blocks

(approx. 120 KB)

is a term of copyright protection technology developed

by Sony Group.

does not guarantee compatibility with other products

bearing the "MagicGate" trademark.

19

Using Memory Cards

Games

GB

Insert the Memory Card into a MEMORY CARD slot on the console front.

Note

Some software titles designate a specific MEMORY CARD slot to use. Refer to the

instructions supplied with the software for details.

Depending on the software, the procedure for saving or loading may vary.

Refer to the instructions supplied with the software for details.

1 At the Browser screen ( page 35), use the directional

buttons to select the icon for the Memory Card you want to

use for copying or deleting data and then press the

button.

2 Select the icon for the data you want to copy or delete, and

then press the button.

3 Select "Copy" or "Delete", and then press the button.

When copying game data, check that two Memory Cards are inserted

in the console. If you have selected "Delete", skip to step 5.

4 Select the destination, and then press the button.

5 Select "Yes", and then press the button.

While copying or deleting data, do not remove the Memory Cards.

6 When copying or deleting is completed, press the button.

Notes

• To view information about a game data item, select the icon for the data and then

press the button to check the details.

• Compatibility between software and Memory Cards:

– You cannot save or copy PlayStation®2 format software to a Memory Card

(SCPH-1020 E).

– You cannot save PlayStation® format game data to a Memory Card (8MB) (for

PlayStation®2). You can, however, copy PlayStation® format game data from a

Memory Card (SCPH-1020 E) to a Memory Card (8MB) (for PlayStation®2) for

storage purposes. Note that such game data cannot be loaded directly from a

Memory Card (8MB) (for PlayStation®2).

Inserting a Memory Card

Saving or loading game data

Copying or deleting game data

MEMORY CARD

Console front

20

Playing an audio CD

1 Turn on the console and insert the disc ( page 15).

Follow steps 1 to 4 of "Starting a game".

The track numbers are displayed.

2 Using the directional buttons, select the track number you

want to play and then press the button.

Playback begins.

Notes

• If you turn on the console after inserting a disc, the track numbers are displayed

automatically.

• You can also start playback from the Browser screen ( page 35).

Caution

To play an audio CD recorded in DTS format, you must connect a device with

a DTS decoder to the DIGITAL OUT (OPTICAL) connector ( page 12).

Note that an extremely loud noise may be emitted if the device does not have a

DTS decoder or if it is connected to the AV MULTI OUT connector.

Using the directional buttons, select the icon for the desired track and then

press the button.

* You can operate directly by pressing the buttons of the Analog Controller

(DUALSHOCK®2).

Note

You can also use the DVD Remote Control (for PlayStation®2) (sold separately).

1 Using the directional buttons, select x and then press the

button.

Playback stops. Press the A (open) button on the console front to

remove the disc.

Audio CDs

Playing an audio CD

Playing a CD

Operating the CD player during playback

Icon (button*) Function

. (L1 button) Go to the beginning of the current or previous track

m (L2 button) Fast reverse

M (R2 button) Fast forward

> (R1 button) Go to the beginning of the next track

N (START button) Start playback

X (START button) Pause playback

x (SELECT button) Stop playback

Ending audio CD playback

La page est en cours de chargement...

Sony PS2 SCPH-75004 Mode d'emploi

Sony PS2 SCPH-75004 Mode d'emploi

dans d''autres langues

Documents connexes