Beko B1754 N Manuel utilisateur

Refrigerator

User manual

Kühlschrank/Gefrierschrank

Bedienungsanleitung

Koelkast

58 5268 0000/AC

1/2

EN / DE / FR / NL/

Congélateur/Réfrigérateur

Manuel d'utilisation

Gebruiksaanwijzing

B1754 N - B1754 FN

Please read this user manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants and

checked under the most meticulous quality control procedures, will provide you

an effective service.

Therefore, read this entire user manual carefully before using the product and

keep it as a reference. If you handover the product to someone else, give the user

manual as well.

The user manual will help you use the product in a fast and safe way.

• Read the manual before installing and operating the product.

• Make sure you read the safety instructions.

• Keep the manual in an easily accessible place as you may need it later.

• Read the other documents given with the product.

Remember that this user manual is also applicable for several other models.

Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

CImportant information or useful tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

A

C

SUPPLIER’S NAME MODEL IDENTIFIER (*)

INFORMATION

C

The model information as stored in the product data base

can be reached by entering following website and searching

for your model identiﬁer (*) found on energy label.

https://eprel.ec.europa.eu/

EN

3

1 Your refrigerator 4

2 Important Safety

Warnings 5

Intended use .....................................5

General safety ...................................5

For products with a ..........................8

water dispenser; ................................8

Child safety ........................................8

Compliance with WEEE Directive and

Disposing of the Waste Product: .......8

Package information ..........................9

HC warning .......................................9

Things to be done for energy saving ..9

3 Installation 11

Points to be paid attention to when the

relocation of the refrigerator .............11

Electrical connection ........................11

Disposing of the packaging .............12

Disposing of your old refrigerator .....12

Placing and Installation ....................12

Changing the illumination lamp .......13

Reversing the doors ........................14

4 Preparation 16

5 Using your refrigerator 17

Thermostat setting button................17

Cooling ............................................18

Freezing ...........................................18

Defrost ............................................18

Stopping your product .....................19

6 Maintenance and

cleaning 20

Protection of plastic surfaces ..........20

7 Troubleshooting 21

CONTENTS

4EN

C Figures that take place in this instruction manual are schematic and may not

correspond exactly with your product. If the subject parts are not included in the

product you have purchased, then it is valid for other models.

1 Your refrigerator

1. Dairy compartment

2. Egg tray (1 pcs.)

3. Door shelves

4. Bottle shelf

5. Bottle gripper

6. Air grill

7. Crisper

8. Crisper cover

9. Defrost water collection channel -

Drain tube

10. Movable shelves

11. Interior light & Thermostat knob

12. a.) Freezing compartment & ice

tray (for models) b.) Frozen

food compartment & ice tray (for

models)

* optional

11

10

8

7

9

12

6

4

1

2

3

5

*

EN

5

2 Important Safety Warnings

Please review the following

information. Failure to observe

this information may cause

injuries or material damage.

Otherwise, all warranty and

reliability commitments will

become invalid.

Original spare parts will be

provided for 10 years, following

the product purchasing date.

Intended use

A

WARNING:

Keep ventilation

openings, in the

appliance enclosure or

in the built-in structure,

clear of obstruction.

A

WARNING:

Do not use mechanical

devices or other

means to accelerate

the defrostingprocess,

other than those

recommended by the

manufacturer.

A

WARNING:

Do not damage the

refrigerant circuit.

A

WARNING:

Do not use electrical

appliances inside

the food storage

compartments of the

appliance, unless

they are of the type

recommended by the

manufacturer.

This appliance is intended to be

used in household and similar

applications such as

– staff kitchen areas in shops,

offices and other working

environments;

– farm houses and by clients

in hotels, motels and other

residential type environments;

– bed and breakfast type

environments;

– catering and similar non-retail

applications.

General safety

• When you want to dispose/

scrap the product, we

recommend you to consult the

authorized service in order to

learn the required information

and authorized bodies.

• Consult your authorized

service for all your questions

and problems related to the

refrigerator. Do not intervene or

let someone intervene to the

refrigerator without notifying the

authorised services.

• For products with a freezer

compartment; Do not eat

cone ice cream and ice cubes

immediately after you take them

out of the freezer compartment!

(This may cause frostbite in

your mouth.)

• For products with a freezer

compartment; Do not put

bottled and canned liquid

beverages in the freezer

compartment. Otherwise, these

may burst.

6EN

• Do not touch frozen food by

hand; they may stick to your

hand.

• Unplug your refrigerator before

cleaning or defrosting.

• Vapor and vaporized cleaning

materials should never be

used in cleaning and defrosting

processes of your refrigerator.

In such cases, the vapor may

get in contact with the electrical

parts and cause short circuit or

electric shock.

• Never use the parts on your

refrigerator such as the door as

a means of support or step.

• Do not use electrical devices

inside the refrigerator.

• Do not damage the parts,

where the refrigerant is

circulating, with drilling or

cutting tools. The refrigerant

that might blow out when the

gas channels of the evaporator,

pipe extensions or surface

coatings are punctured causes

skin irritations and eye injuries.

• Do not cover or block the

ventilation holes on your

refrigerator with any material.

• Electrical devices must be

repaired by only authorised

persons. Repairs performed by

incompetent persons create a

risk for the user.

• In case of any failure or during

a maintenance or repair work,

disconnect your refrigerator’s

mains supply by either

turning off the relevant fuse or

unplugging your appliance.

• Do not pull by the cable when

pulling off the plug.

• Ensure highly alcoholic

beverages are stored securely

with the lid fastened and placed

upright.

• Never store spray cans

containing flammable and

explosive substances in the

refrigerator.

• Do not use mechanical devices

or other means to accelerate

the defrosting process, other

than those recommended by

the manufacturer.

• This product is not intended

to be used by persons with

physical, sensory or mental

disorders or unlearned or

inexperienced people (including

children) unless they are

attended by a person who

will be responsible for their

safety or who will instruct them

accordingly for use of the

product

• Do not operate a damaged

refrigerator. Consult with the

service agent if you have any

concerns.

• Electrical safety of your

refrigerator shall be guaranteed

only if the earth system in your

house complies with standards.

• Exposing the product to

rain, snow, sun and wind is

dangerous with respect to

electrical safety.

• Contact authorized service

when there is a power cable

damage to avoid danger.

• Never plug the refrigerator

into the wall outlet during

installation. Otherwise, risk of

death or serious injury may

arise.

EN

7

• This refrigerator is intended

for only storing food items. It

must not be used for any other

purpose.

• Label of technical specifications

is located on the left wall inside

the refrigerator.

• Never connect your refrigerator

to electricity-saving systems;

they may damage the

refrigerator.

• If there is a blue light on the

refrigerator, do not look at the

blue light with optical tools.

• For manually controlled

refrigerators, wait for at least 5

minutes to start the refrigerator

after power failure.

• This operation manual should

be handed in to the new owner

of the product when it is given

to others.

• Avoid causing damage on

power cable when transporting

the refrigerator. Bending cable

may cause fire. Never place

heavy objects on power cable.

Do not touch the plug with

wet hands when plugging the

product

• Do not plug the refrigerator if

the wall outlet is loose.

• Water should not be sprayed

on inner or outer parts of the

product for safety purposes.

• Do not spray substances

containing inflammable gases

such as propane gas near the

refrigerator to avoid fire and

explosion risk.

• Never place containers filled

with water on top of the

refrigerator; in the event of

spillages, this may cause

electric shock or fire.

• Do not overload the refrigerator

with food. If overloaded, the

food items may fall down

and hurt you and damage

refrigerator when you open the

door.

• Never place objects on top

of the refrigerator; otherwise,

these objects may fall down

when you open or close the

refrigerator’s door.

• As they require a precise

temperature, vaccines, heat-

sensitive medicine and scientific

materials and etc. should not

be kept in the refrigerator.

• If not to be used for a long

time, refrigerator should be

unplugged. A possible problem

in power cable may cause fire.

• Refrigerator may move if

adjustable legs are not properly

secured on the floor. Properly

securing adjustable legs on the

floor can prevent the refrigerator

to move.

• When carrying the refrigerator,

do not hold it from door handle.

Otherwise, it may be snapped.

8EN

• When you have to place

your product next to another

refrigerator or freezer, the

distance between devices

should be at least 8cm.

Otherwise, adjacent side walls

may be humidified.

• The product shall never be

used while the compartment

which is located at the top or

back of your product and in

which electronic boards are

available (electronic board box

cover) (1) is open.

1

For products with a

water dispenser;

• Pressure for cold water inlet

shall be maximum 90 psi (6.2

bar). If your water pressure

exceeds 80 psi (5.5 bar), use a

pressure limiting valve in your

mains system. If you do not

know how to check your water

pressure, ask for the help of a

professional plumber.

• If there is risk of water

hammer effect in your

installation, always use a

water hammer prevention

equipment in your installation.

Consult Professional

plumbers is you are not

sure that there is no water

hammer effect in your

installation.

• Do not install on the hot

water inlet. Take precautions

against of the risk of

freezing of the hoses. Water

temperature operating

interval shall be 33°F (0.6°C)

minimum and 100°F (38°C)

maximum.

• Use only potable water.

Child safety

• If the door has a lock, the key

should be kept away from

reach of children.

• Children must be supervised to

prevent them from tampering

with the product.

Compliance with WEEE

Directive and Disposing of

the Waste Product:

This product complies

with EU WEEE

Directive (2012/19/EU).

This product bears a

classification symbol

for waste electrical and

electronic equipment (WEEE).

This product has been

manufactured with high quality

parts and materials which can

be reused and are suitable for

recycling. Therefore, do not

dispose the product with normal

domestic waste at the end of its

service life. Take it to a collection

EN

9

point for the recycling of electrical

and electronic equipment. Please

consult your local authorities to

learn the nearest collection point.

Help protect the environment and

natural resources by recycling

used products. For children’s

safety, cut the power cable and

break the locking mechanism of

the door, if any, so that it will be

non-functional before disposing

of the product.

Package information

Packaging materials of the

product are manufactured

from recyclable materials in

accordance with our National

Environment Regulations. Do

not dispose of the packaging

materials together with the

domestic or other wastes. Take

them to the packaging material

collection points designated by

the local authorities.

Do not forget...

Any recycled substance is an

indispensable matter for nature

and our national asset wealth.

If you want to contribute to the

re-evaluation of the packaging

materials, you can consult to your

environmentalist organizations or

the municipalities where you are

located.

HC warning

If your product's cooling

system contains R600a:

This gas is flammable. Therefore,

pay attention to not damaging

the cooling system and piping

during usage and transportation.

In the event of damage, keep

your product away from potential

fire sources that can cause the

product catch a fire and ventilate

the room in which the unit is

placed.

Ignore this warning if your

product's cooling system

contains R134a.

Type of gas used in the product

is stated in the type label which

is on the left wall inside the

refrigerator.

Never throw the product in fire

for disposal.

Things to be done for energy

saving

• Do not leave the doors of your

refrigerator open for a long

time.

• Do not put hot food or drinks in

your refrigerator.

• Do not overload your

refrigerator so that the air

circulation inside of it is not

prevented.

• Do not install your refrigerator

under direct sunlight or near

heat emitting appliances such

as ovens, dishwashers or

radiators. Keep your refrigerator

at least 30cm away from heat

emitting sources and at least

5cm from electrical ovens.

10 EN

• Pay attention to keep your food

in closed containers.

• For products with a freezer

compartment; You can store

maximum amount of food

items in the freezer when

you remove the shelf or

drawer of the freezer. Energy

consumption value stated

for your refrigerator has been

determined by removing freezer

shelf or drawer and under

maximum load. There is no

harm to use a shelf or drawer

according to the shapes and

size of food to be frozen.

• Thawing frozen food in fridge

compartment will both provide

energy saving and preserve the

food quality.

EN

11

3 Installation

B In case the information which are

given in the user manual are not taken

into account, manufacturer will not

assume any liability for this.

Points to be paid attention

to when the relocation of the

refrigerator

1. Your refrigerator should be

unplugged.Before transportation of

your refrigerator, it should be emptied

and cleaned.

2. Before it is re-packaged,

shelves, accessories, crisper, etc.

inside your refrigerator should be

fixed with adhesive tape and secured

against impacts. Package should

be bound with a thick tape or sound

ropes and the transportation rules

on the package should be strictly

observed.

3. Original packaging and foam

materials should be kept for future

transportations or moving.

Before you start the refrigerator,

Check the following before you

start to use your refrigerator:

1. Attach 2 plastic wedges as

illustrated below. Plastic wedges are

intended to keep the distance which

will ensure the air circulation between

your refrigerator and the wall. (The

picture is drawn up as a representation

and it is not identical with your

product.)

2. Clean the interior of the

refrigerator as recommended in the

“Maintenance and cleaning” section.

3. Connect the plug of the

refrigerator to the wall socket. When

the fridge door is opened, fridge

internal lamp will turn on.

4. When the compressor starts to

operate, a sound will be heard. The

liquid and gases sealed within the

refrigeration system may also give rise

to noise, even if the compressor is not

running and this is quite normal.

5. Front edges of the refrigerator

may feel warm. This is normal. These

areas are designed to be warm to

avoid condensation.

Electrical connection

Connect your product to a grounded

socket which is being protected by a

fuse with the appropriate capacity.

Important:

The connection must be in compliance

with national regulations.

• The power plug must be easily

accessible after installation.

• Electrical safety of your refrigerator

shall be guaranteed only if the earth

system in your house complies with

standards.

• The voltage stated on the label

located at left inner side of your

product should be equal to your

network voltage.

• Extension cables and multi plugs

must not be used for connection.

B A damaged power cable must be

replaced by a qualified electrician.

B Product must not be operated before

it is repaired! There is the risk of

electric shock!

12 EN

Disposing of the packaging

The packing materials may be

dangerous for children. Keep the

packing materials out of the reach

of children or dispose of them by

classifying them in accordance with the

waste instructions stated by your local

authorities. Do not throw away with

regular house waste, throw away on

packaging pick up spots designated by

the local authorities.

The packing of your refrigerator is

produced from recyclable materials.

Disposing of your old

refrigerator

Dispose of your old refrigerator without

giving any harm to the environment.

• You may consult your authorized

dealer or waste collection center of

your municipality about the disposal of

your refrigerator.

Before disposing of your refrigerator,

cut out the electric plug and, if there

are any locks on the door, make them

inoperable in order to protect children

against any danger.

Placing and Installation

A If the entrance door of the room

where the refrigerator will be installed is

not wide enough for the refrigerator to

pass through, then call the authorized

service to have them remove the doors

of your refrigerator and pass it sideways

through the door.

1. Install your refrigerator to a

place that allows ease of use.

2. Keep your refrigerator away

from heat sources, humid places and

direct sunlight.

3. There must be appropriate air

ventilation around your refrigerator in

order to achieve an efficient operation.

If the refrigerator is to be placed in a

recess in the wall, there must be at

least 5 cm distance with the ceiling

and at least 5 cm with the wall. Do not

place your product on the materials

such as rug or carpet.

4. Place your refrigerator on an

even floor surface to prevent jolts.

5. Your product requires adequate

air circulation to function efficiently.

If the product will be placed in an

alcove, remember to leave at least 5

cm clearance between the product

and the ceiling, rear wall and the side

walls.If the product will be placed in

an alcove, remember to leave at least

5 cm clearance between the product

and the ceiling, rear wall and the side

walls. Check if the rear wall clearance

protection component is present at its

location (if provided with the product).

If the component is not available, or if

it is lost or fallen, position the product

so that at least 5 cm clearance shall

be left between the rear surface of the

product and the wall of the room. The

clearance at the rear is important for

efficient operation of the product.

EN

13

Changing the illumination

lamp

To change the Bulb/LED used for

illumination of your refrigerator, call your

AuthorisedService.

The lamp(s) used in this appliance

is not suitable for household room

illumination. The intended purpose of

this lamp is to assist the user to place

foodstuffs in the refrigerator/freezer in

a safe and comfortable way.The lamps

used in this appliance have to withstand

extreme physical conditions such as

temperatures below -20 °C.

(only chest and upright freezer)

14 EN

Reversing the doors

3

5

2

1

6

4

D

B

A

C

7

11

10

9

8

E

F

G

EN

15

D

B

A

C

E

F

G

16 EN

4 Preparation

• Your refrigerator should be installed at

least 30 cm away from heat sources

such as hobs, ovens, central heater

and stoves and at least 5 cm away

from electrical ovens and should not

be located under direct sunlight.

• The ambient temperature of the room

where you install your refrigerator

should at least be 10°C. Operating

your refrigerator under cooler

conditions is not recommended with

regard to its efficiency.

• Please make sure that the interior of

your refrigerator is cleaned thoroughly.

• If two refrigerators are to be installed

side by side, there should be at least

2 cm distance between them.

• When you operate your refrigerator

for the first time, please observe the

following instructions during the initial

six hours.

• The door should not be opened

frequently.

• It must be operated empty without

any food in it.

• Do not unplug your refrigerator. If

a power failure occurs out of your

control, please see the warnings in

the “Recommended solutions for the

problems” section.

• Original packaging and foam

materials should be kept for future

transportations or moving.

• The baskets/drawers that are

provided with the chill compartment

must always be in use for low energy

consumption and for better storage

conditions.

• Food contact with the temperature

sensor in the freezer compartment

may increase energy consumption of

the appliance. Thus any contact with

the sensor(s) must be avoided.

• In some models, the instrument panel

automatically turns off 5 minutes

after the door has closed. It will

be reactivated when the door has

opened or pressed on any key.

• Due to temperature change as a

result of opening/closing the product

door during operation, condensation

on the door/body shelves and the

glass containers is normal

EN

17

5 Using your refrigerator

Thermostat setting button

The operating temperature is regulated

by the temperature control.

Warm Cold

1 2 3 4 5

(Or) Min. Max.

1 = Lowest cooling setting

(Warmest setting)

5 = Highest cooling setting

(Coldest setting)

(Or)

Min. = Lowest cooling setting

(Warmest setting)

Max. = Highest cooling setting

(Coldest setting)

The average temperature inside the

fridge should be around +5°C.

Please choose the setting according

to the desired temperature.

Please note that there will be different

temperatures in the cooling area.

The coldest region is immediately

above the vegetable compartment.

The interior temperature also depends

on ambient temperature, the frequency

with which the door is opened and the

amount of foods kept inside.

Frequently opening the door causes

the interior temperature to rise.

For this reason, it is recommended

to close the door again as soon as

possible after use.

The interior temperature of your

refrigerator changes for the following

reasons;

• Seasonal temperatures,

• Frequent opening of the door and

leaving the door open for long

periods,

• Food put into the refrigerator

without cooling down to the room

temperature,

• The location of the refrigerator in the

room (e.g. exposing to sunlight).

• You may adjust the varying interior

temperature due to such reasons

by using the thermostat. Numbers

around the thermostat button

indicates the cooling degrees.

• If the ambient temperature is higher

than 32°C, turn the thermostat

button to maximum position.

• If the ambient temperature is lower

than 25°C, turn the thermostat

button to minimum position.

18 EN

Cooling

Food storage

The fridge compartment is for the

short-term storage of fresh food and

drinks.

Freezing

Freezing food

The freezing compartment is marked

with this symbol.

You can use the appliance for freezing

fresh food as well as for storing pre-

frozen food.

Please refer to the recommendations

given on the packaging of your food.

Storing frozen food

The frozen food compartment is

marked with symbol.

The frozen food compartment is

suitable for the storage of pre-frozen

food. The recommendation for storage,

as stated on the food packaging,

should be observed at all times.

Defrost

A) Fridge compartment

Fridge compartment performs full-

automatic defrosting. Water drops and

a frosting up to 7-8 mm can occur

on the inner rear wall of the fridge

compartment while your refrigerator

cools down. Such formation is normal

as a result of the cooling system.

The frost formation is defrosted by

performing automatic defrosting with

certain intervals thanks to the automatic

defrosting system of the rear wall. User

is not required to scrape the frost or

remove the water drops.

Water resulting from the defrosting

passes from the water collection groove

and flows into the evaporator through

the drain pipe and evaporates here by

itself.

Check regularly to see if the drain

pipe is clogged or not and clear it with

the stick in the hole when necessary.

Deep freezer compartment does not

perform automatic defrosting in order

to prevent decaying of the frozen food.

EN

19

Stopping your product

If your thermostat is equipped with

“0” position:

- Your product will stop operating

when you turn the thermostat button to

“0” (zero) position. Your product will not

start unless to you turn the thermostat

button to position “1” or one of the

other positions again.

If your thermostat is equipped with

“min” position:

- Unplug your product to stop it.

B) Freezer compartment

Defrosting is very straightforward

and without mess, thanks to a special

defrost collection basin.

Defrost twice a year or when a frost

layer of around 7 (1/4”) mm has formed.

To start the defrosting procedure,

switch off the appliance at the socket

outlet and pull out the mains plug.

All food should be wrapped in several

layers of newspaper and stored in a

cool place (e.g. fridge or larder).

Containers of warm water may be

placed carefully in the freezer to speed

up the defrosting.

Do not use pointed or sharp-edged

objects, such as knives or forks to

remove the frost.

Never use hair dryers, electrical

heaters or other such electrical

appliances for defrosting.

Sponge out the defrost water

collected in the bottom of the freezer

compartment. After defrosting, dry the

interior thoroughly.

Insert the plug into the wall socket and

switch on the electricity supply.

20 EN

6 Maintenance and cleaning

A Never use gasoline, benzene or similar

substances for cleaning purposes.

B We recommend that you unplug the

appliance before cleaning.

B Never use any sharp abrasive

instrument, soap, household cleaner,

detergent and wax polish for cleaning.

B For non-No Frost products,

water drops and frosting up to a

fingerbreadth occur on the rear wall of

the Fridge compartment. Do not clean

it; never apply oil or similar agents on

it.

B Only use slightly damp microfiber

cloths to clean the outer surface of

the product. Sponges and other types

of cleaning cloths may scratch the

surface.

C Use lukewarm water to clean the

cabinet of your refrigerator and wipe it

dry.

C Use a damp cloth wrung out in

a solution of one teaspoon of

bicarbonate of soda to one pint of

water to clean the interior and wipe it

dry.

B Make sure that no water enters the

lamp housing and other electrical

items.

B If your refrigerator is not going to be

used for a long period of time, unplug

the power cable, remove all food,

clean it and leave the door ajar.

C Check door seals regularly to ensure

they are clean and free from food

particles.

A To remove door racks, remove all the

contents and then simply push the

door rack upwards from the base.

A Never use cleaning agents or water

that contain chlorine to clean the

outer surfaces and chromium coated

parts of the product. Chlorine causes

corrosion on such metal surfaces.

A Do not use sharp, abrasive tools,

soap, household cleaning agents,

detergents, kerosene, fuel oil,

varnish etc. to prevent removal and

deformation of the prints on the

plastic part. Use lukewarm water and

a soft cloth for cleaning and then wipe

it dry.

Protection of plastic

surfaces

C Do not put the liquid oils or oil-cooked

meals in your refrigerator in unsealed

containers as they damage the plastic

surfaces of your refrigerator. In case of

spilling or smearing oil on the plastic

surfaces, clean and rinse the relevant

part of the surface at once with warm

water.

La page est en cours de chargement...

Beko B1754 N Manuel utilisateur

Ce manuel convient également à

Beko B1754 N Manuel utilisateur

dans d''autres langues