Danfoss PVC Normally Closed Solenoid Valve Guide d'installation
- Taper
- Guide d'installation
Installation Guide
Normally closed solenoid valve
Type PVC
© Danfoss A/S, 2014-04 520L0572 • Rev BD • Apr 2014 1
157R9902
157R9902
Arbejdstrykområde over tanktryk
Operation pressure range over tank pressure
Arbeitsdruckbereich über dem Tankdruck
Plage de pression de travail ou - dessus de la pression T
6 - 13.5 bar
[87 - 196 psi]
Max tank tryk, statisk/dynamisk
Max tank pressure, static / dynamic
Max. Tand Druck, statisch/dynamisch
Pression maxi sur orifice T, statique/dynamique
25 bar / 40 bar
[362 psi / 580 psi]
Max. overfladetemperatur for spole
Max. coil surface temperature
Max. Temperatur der Spulenoberfläche
Température maxi surface de bobine
155° C [311°F ]
Nominel spænding
Rated voltage
Nennspannung
Tension nominale
12 V
24 V
Inlet voltage fluctuations must not exceed ±10% of nominal voltage to obtain correct operation and
long life coils.
Position
Repérage
Nøglevidde
Across flats
Schlüsselweite
Surplats
Max. tilspændingsmoment
Max. tightening torque
Max. Anzugsmoment
Couple de serrage maxi
1 17 mm (0.67 in) 23 Nm [203] lbf·in]
2 13 mm (0.51 in) 5 Nm [44 lbf·in]
Tekniske data
Technical data
Technische Daten
Caractéristiques
Techniques
1
2
T ←
↑
P
WWYY
Week code
2 520L0572 • Rev BD • Apr 2014 © Danfoss A/S, 2014-04
Strømforbrug
Current consumption
Strohmaufnahme
Intensité nominale
Ved 22°C spoletemperatur
22°C coil temperature
bei 22°C Spulentemperatur
Temp. bobine à 22°C
12V 24V
0.36 A 0.18 A
Ved 110°C spoletemperatur
110°C coil temperature
bei 110°C Spulentemperatur
Temp. bobine à 110°C
0.27 A 0.14 A
Effektforbrug
Power consumption
Leistungsaufnahme
Puissance absorbée
Ved 22°C spoletemperatur
22°C coil temperature
bei 22°C Spulentemperatur
Temp. bobine à 22°C
4.33 W 4.40 W
Ved 110°C spoletemperatur
110°C coil temperature
bei 110°C Spulentemperatur
Temp. bobine à 110°C
3.22 W 3.27 W
Tilslutning
Connection
Anschluß
Raccordement
Spolen har indbygget beskyttelsesdiode.
Det 2 -polede stik kan forbindes vilkårligt.
The coil has built-in protection diode.
The 2 pole connector can be conneted arbitrary.
Die Spule hat eingebaute Schutzdiode.
Der 2-Polige Stecker kan willkürlich verbunden werden
La bobine ayant une diode de protection,
la prise mâle à 2 pôles peut être branchée arbitrairement
Tekniske data
Technical data
Technische Daten
Caractéristiques Techniques
1
2
AMP crimp tool incl. crimp insert for JPT-contact 157B4989
NB: Can be ordered by Danfoss
3
4
Pos. Description QTY. AMP code No.
1
Wire sealing for wire diameter 2.2 - 3.0mm [0.09 - 0.12 in]
Wire sealing for wire diameter 1.2 - 2.1mm [0.05 - 0.08 in]
2
828904-1
828905-1
2
JPT contact (loose piece)
JPT contact (strip)
2
929930-1
927770-1
3 Housing 1 1-967239 -1
4 Seal 1 0-963209-1
NB: To be ordered by AMP
Olieviskositet
Oil Viscosity
Ölviskositet
Viscosité de l’huile
Range: 12 - 75 mm
2
/s [66 - 350 SUS]
Min.: 4 mm
2
/s [40 SUS]
Max.: 460 mm
2
/s [2130 SUS]
Filtrering
Filtering
Filtrierung
Filtrage
Max. degree of contamination
(ISO 4406): 19/16
Omgivelsestemperatur
Ambient temperature
Umgebungstemperatur
Température ambiante
Min.: -30°C [-22°F]
Max.: 60°C [140°F]
Olietemperatur
Oil temperature
Öltemperatur
Température de l’huile
Range: 30 - 60°C [86 - 140°F]
Min: -30°C [-22°F]
Max: 90°C [194°F]
PVC, order number
12 V 24 V
PVC Normally closed solenoid valve 157B4282 157B4284
-
1
-
2
Danfoss PVC Normally Closed Solenoid Valve Guide d'installation
- Taper
- Guide d'installation
Documents connexes
-
Danfoss PVG 120 Guide d'installation
-
Danfoss PVG 32 Guide d'installation
-
-
-
-
-
-
-