Yamaha YHT-4950UBL Mode d'emploi

Precautions ........................................................... 2

Preparations.......................................................... 9

Playback.............................................................. 17

English

Précautions d'usage............................................ 25

Préparations........................................................ 31

Lecture................................................................ 39

Français

Precauciones ...................................................... 47

Preparación......................................................... 52

Reproducción...................................................... 60

Español

AV Receiver

Ampli-tuner audio-vidéo

RX-V385/HTR-3072

Quick Start Guide

Guide de démarrage rapide

Guía de inicio rápida

EN

FR

ES

UCALP

RX-V385 HTR-3072

2 En

The above warning is located on the rear of the unit.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert you to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of

time.

14 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC

SHOCK DO NOT OPEN

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this booklet in a safe place for future

reference.

En 3

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

FCC/IC NOTICE (U.S.A. and Canada)

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC

radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the

radiator at least 20cm or more away from person’s body.

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation

of this device.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

FCC INFORMATION (USA)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by Yamaha may void your authority,

granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to accessories and/or another product use only

high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void your FCC authorization to use

this product in the USA.

3 NOTE: This product has been tested and found to comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides

a reasonable level of assurance that your use of this product in a residential environment will not

result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the

instructions found in the users manual, may cause interference harmful to the operation of other

electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all

installations. If this product is found to be the source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line

filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you can not locate the appropriate retailer, please

contact Yamaha Corporation of America A/V Division, 6600 Orangethorpe Avenue, Buena Park,

CA 90620, USA.

The above statements apply ONLY to those products distributed by Yamaha Corporation of

America or its subsidiaries.

COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY

PROCEDURE)

Responsible Party: Yamaha Corporation of America A/V Division

Address: 6600 Orangethorpe Avenue, Buena Park, CA 90620

Telephone: 714-522-9011

Type of Equipment: AV Receiver

Model Name: RX-V385, HTR-3072

CAN ICES-3(B)/NMB-3(B)

4 En

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE USE. BE

SURE TO FOLLOW THESE INSTRUCTIONS.

The precautions listed below are to prevent risk of harm to the

user and others, as well as to prevent property damage, and to

help the user use this unit properly and safely. Be sure to follow

these instructions.

After reading this manual, be sure to keep it in a safe place where it can be

referenced at any time.

WARNING

This content indicates “risk of serious injury or death.”

Power supply/power cord

• Do not do anything that could damage the power cord.

- Do not place it near a heater.

- Do not bend it excessively or alter it.

- Do not scratch it.

- Do not place it under a heavy object.

Using the power cord/adaptor with the core of the cord exposed could cause electric shocks

or a fire.

• Do not touch the power plug or cord if there is a chance of lightning. Failure to observe this

may cause electric shocks.

• Use this unit with the power supply voltage printed on it. Failure to connect to an

appropriate AC outlet may cause a fire, electric shocks, or malfunctions.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it. Failure to observe this may cause a fire or electric shocks.

• When setting up the unit, make sure that the AC outlet you are using is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power switch and disconnect

the plug from the AC outlet. Even when the power switch is turned off, as long as the power

cord is not unplugged from the wall AC outlet, the unit will not be disconnected from the

power source.

• If you hear thunder or suspect approaching lightning, quickly turn off the power switch and

pull the power plug from the AC outlet. Failure to observe this may cause a fire or

malfunctions.

• If not using the unit for long periods of time, be sure to pull the power plug from the AC

outlet. Failure to observe this may cause a fire or malfunctions.

Do not disassemble

• Do not disassemble or modify this unit. Failure to observe this may cause a fire, electric

shocks, injury, or malfunctions. If you notice any irregularities, be sure to request an

inspection or repair from the dealer where you purchased the unit or from qualified Yamaha

service personnel.

Water warning

• Do not expose the unit to rain, use it near water or in damp or wet conditions, or place on it

any containers (such as vases, bottles or glasses) containing liquids which might spill into

any openings or places where water may drop. A liquid such as water getting into the unit

may cause a fire, electric shocks, or malfunctions. If any liquid such as water seeps into the

device, turn off the power immediately and unplug the power cord from the AC outlet. Then,

request an inspection from the dealer where you purchased the unit or from qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands. Do not handle this unit with wet

hands. Failure to observe this may cause electric shocks or malfunctions.

Fire warning

• Do not place any burning items or open flames near the unit, since they may cause a fire.

Maintenance and care

• Do not use aerosols or spray-type chemicals that contain combustible gas for cleaning or

lubrication. The combustible gas will remain inside the unit, which may cause explosion or

fire.

Battery use

• Do not disassemble a battery. If the contents of the battery get on your hands or in your

eyes, it can cause blindness or chemical burns.

• Do not dispose of batteries in fire. Doing so may result in the battery bursting, causing a fire

or injury.

• Do not expose a battery to high temperatures, such as direct sunlight or a fire. The battery

may burst, causing a fire or injury.

• Be sure to request inspections or repairs from the dealer where you

purchased the unit or from qualified Yamaha service personnel.

• Yamaha cannot be held responsible for injury to you or damage of

the products caused by improper use or modifications to the unit, or

data that is lost or destroyed.

• This product is for ordinary homes. Do not use for applications

requiring high reliability, such as managing lives, health care or

high-value assets.

En 5

• Do not attempt to recharge batteries that are not intended to be charged. Charging could

cause the battery to burst or leak, which can cause blindness, chemical burns, or injury.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in

contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor.

Battery fluid is corrosive and may possibly cause loss of sight or chemical burns.

Wireless unit

• Do not use this unit near medical devices or inside medical facilities. Radio waves from this

unit may affect electro-medical devices.

• Do not use this unit within 15 cm (6 in) of persons with a heart pacemaker implant or a

defibrillator implant. Radio waves from this unit may affect electro-medical devices, such as

a heart pacemaker implant or defibrillator implant.

If you notice any abnormality

• If any of the following abnormalities occur, immediately turn off the power and disconnect

the power plug. If any of the following abnormalities occur, immediately turn off any

amplifiers and receivers.

- The power cord/plug is damaged.

- An unusual smell or smoke is emitted from the unit.

- Foreign material gets into the interior of the unit.

- There is a loss of sound during use.

- There is a crack or damage in the unit.

Continued use could cause electric shocks, a fire, or malfunctions. Immediately request an

inspection or repair from the dealer where you purchased the unit or from qualified Yamaha

service personnel.

• Be careful not to drop or apply strong impact to this unit. If you suspect the unit may have

been damaged due to dropping or impact, immediately turn off the power and pull the power

plug from the AC outlet. Failure to observe this may cause electric shocks, a fire, or

malfunctions. Immediately request an inspection from the dealer where you purchased the

unit or from qualified Yamaha service personnel.

CAUTION

This content indicates “risk of injury.”

Power supply/power cord

• Do not use an AC outlet where the power plug fits loosely when inserted. Failure to observe

this may cause a fire, electric shocks, or burns.

• When removing the electric plug from the unit or an AC outlet, always hold the plug itself

and not the cord. Pulling by the cord can damage it and cause electric shocks or a fire.

• Insert the power plug firmly all the way into the AC outlet. Using the unit when it is not

plugged in sufficiently can cause dust to accumulate on the plug, causing a fire or burns.

Installation

• Do not place the unit in an unstable position where it might accidentally drop or fall over and

cause injuries.

• Do not block this unit's ventilation holes (cooling slits). This unit has ventilation holes on the

top/side/bottom to prevent the internal temperature from becoming too high. Failure to

observe this may trap heat inside the unit, causing a fire or malfunctions.

• When installing this unit:

- Do not cover it with any cloth.

- Do not install it on a carpet or rug.

- Make sure the top surface faces up; do not install on its sides or upside down.

- Do not use the device in a confined, poorly-ventilated location.

Failure to observe the above may trap heat inside the unit, causing a fire or malfunctions.

Ensure that there is adequate space around the unit: at least 30 cm (11-3/4 in) on top,

20 cm (7-7/8 in) on the sides, and 20 cm (7-7/8 in) on the rear.

• Do not install the unit in places where it may come into contact with corrosive gases or salt

air

. Doing so may result in malfunction.

• Avoid being near the unit during a disaster, such as an earthquake. Since the unit may turn

over or fall and cause injury, quickly move away from the unit and go to a safe place.

• Before moving this unit, be sure to turn off the power switch and disconnect all connection

cables. Failure to observe this may damage the cables or cause you or someone else to

trip and fall.

• For proper installation of the outdoor antenna, make sure to have it done by the dealer from

where you purchased the unit or by qualified service personnel. Failure to observe this may

cause the installation to fall and result in injury. Installation requires special skills and

experience.

Hearing loss

• Do not use the unit/speakers or headphones for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing loss. If you

experience any hearing loss or ringing in the ears, consult a physician.

• Before connecting the unit to other devices, turn off the power for all devices. Also, before

turning the power of all devices on or off, make sure that all volume levels are set to the

minimum. Failing to do so may result in hearing loss, electric shock, or device damage.

• When turning on the AC power in your audio system, always turn on the amplifier or

receiver LAST, to avoid hearing loss and speaker damage. When turning the power off, the

amplifier or receiver should be turned off FIRST for the same reason. Failure to observe the

above may cause hearing impairment or speaker damage.

Maintenance

• Remove the power plug from the AC outlet before cleaning the unit. Failure to observe this

may cause electric shocks.

6 En

Handling caution

• Do not insert your hand or fingers into the ventilation holes of this unit. Failure to observe

this may cause injury.

• Do not insert foreign materials such as metal or paper into the ventilation holes of this unit.

Failure to observe this may cause a fire, electric shocks, or malfunctions. If foreign material

gets into the unit, immediately shut off the power and pull the power plug from the AC outlet

and request an inspection from the dealer where you purchased the unit or from qualified

Yamaha service personnel.

• Do not do the following:

- put heavy items on top of the equipment.

- place the equipment in a stack.

- apply unreasonable force to buttons, switches, input/output terminals, etc.

• Avoid pulling the connected cables to prevent injuries or damage to the unit by causing it to

fall.

Battery use

• Always replace all batteries at the same time. Do not use new batteries together with old

ones. Using new ones with old ones could cause a fire, burns, or inflammation due to fluid

leaks.

• Do not use batteries other than specified batteries. Doing so cause fire, burns, or

inflammation due to leakage.

• Do not mix battery types, such as alkaline batteries with manganese batteries, or batteries

from different makers, or different types of batteries from the same maker, since this can

cause a fire, burns, or inflammation due to fluid leaks.

• Keep batteries away from children. A child could accidentally swallow a battery. Failure to

observe this may also cause inflammation due to battery fluid leaks.

• Do not put in a pocket or bag, carry, or store batteries together with pieces of metal. The

battery could short, burst, or leak, causing a fire or injury.

• Always make sure all batteries are inserted in conformity with the +/- polarity markings.

Failure to do so might result in a fire, burns, or inflammation due to fluid leaks.

• When the batteries run out, or if the unit is not to be used for a long time remove the

batteries from the remote control to prevent possible leakage of the battery fluid.

• When storing or discarding batteries, insulate the terminal area by applying tape, or some

other protection. Mixing them with other batteries or metal objects can cause a fire, burns,

or inflammation due to fluid.

Notice

Indicates points that you must observe in order to prevent

product failure, damage or malfunction and data loss.

Power supply/power cord

• If not using the unit for a long period of time, be sure to pull the power plug from the outlet.

Even if the z (Standby/On) switch has been turned off (the screen display is off), a minute

current is still flowing.

Installation

• Do not use this unit in the vicinity of other electronic equipment, such as a TV, radio, or

mobile phone. Failure to observe this may cause this unit or the TV or radio to produce

noise.

• Do not use this unit in a location that is exposed to direct sunlight, that becomes extremely

hot, such as near a heater, or extremely cold, or that is subject to excessive dust or

vibration. Failure to observe this may cause the unit's panel to become deformed, the

internal components to malfunction, or for operation to become unstable.

• Install this unit as far away from other electronic equipment as possible.

Digital signals from this unit may interfere with other electronic equipment.

• If using a wireless function, avoid installing this unit near metal walls or desks, microwave

ovens, or other wireless network devices.

Obstructions could shorten the transmission distance.

Connections

• If connecting external units, be sure to thoroughly read the manual for each unit and

connect them in accordance with the instructions.

Failure to properly handle a unit in accordance with the instructions could cause

malfunctions.

• Do not connect this unit to industrial units.

Digital audio interface standards for consumer use and industrial use are different. This unit

has been designed to connect to a consumer-use digital audio interface. Connections to an

industrial-use digital audio interface could not only cause this unit to malfunction, but could

also damage the speakers.

Handling

• Do not place vinyl, plastic, or rubber products on this unit. Failure to observe this may cause

discoloration or deformation in the panel of this unit.

• If the ambient temperature changes drastically (such as during unit transportation or under

rapid heating or cooling) and there is a chance condensation may have formed in the unit,

leave the unit for several hours without turning on the power until it is completely dry before

use. Using the unit while there is condensation can cause malfunctions.

En 7

Maintenance

• When cleaning the unit, use a dry, soft cloth. Using chemicals such as benzine or thinner,

cleaning agents, or chemical scrubbing cloths can cause discoloration or deformation.

Batteries

• Be sure to discard used batteries in accordance with local regulations.

Information

About content in this manual

• The illustrations and screens in this manual are for instructional purposes only.

• The company names and product names in this manual are the trademarks or registered

trademarks of their respective companies.

• Software may be revised and updated without prior notice.

8 En

Introduction

• This unit is a product for enjoying music and video at home.

• This document explains basic speaker system setup and unit configuration,

followed by step-by-step instructions. Basic operations, such as playing

Blu-ray Discs, DVDs, and radio content, are also explained.

The unit is equipped with a number of other functions not described in this

document. For more information about this product, refer to the Owner’s

Manual on the Yamaha website.

Follow one of the methods described below to view the latest Owner’s

Manual.

In HTML format

• Scan the QR code found on the front cover of this document.

• Visit the following website.

http://avpro.global.yamaha.com/manual/avr/rxv385/

http://avpro.global.yamaha.com/manual/avr/htr3072/

In PDF format

• Visit the following website.

http://download.yamaha.com/

[For U.S. customers only]

Visit the following website for additional information, FAQ’s, downloads such

as “Owner’s Manual” and product updates.

http://usa.yamaha.com/support/

Features

The unit is also capable of the following, which are not described in this

document. See the Owner’s Manual to help you get the most out of the unit.

• ECO mode (power saving function)

• Controlling TV, AV receiver, and BD/DVD player operation (HDMI

Control)

• Configuring system settings (ADVANCED SETUP menu)

For more information, see “What you can do with the unit” in the Owner’s

Manual.

RX-V385

HTR-3072

Trademarks and trade names used in this document are those of their

respective owners. See the Owner’s Manual for more information.

AV SETUP GUIDE

AV SETUP GUIDE is an app that guides you

through the process of connecting a TV or playback

device, such as a BD/DVD or CD player, and

speakers to the AV receiver. Search “AV SETUP

GUIDE” on the App Store or Google Play for

details.

En 9

1

Preparation

Confirming package contents Preparing cables

The following cables (not supplied) are required to build the system described

in this document.

• Speaker cables (depending on the number of speakers)

• Audio pin cable (x1)

• HDMI cables (x3)

Remote control

Batteries (AAA, R03, UM-4)

(x2)

AM antenna FM antenna

Quick Start Guide (this booklet)

YPAO microphone

One of the above is supplied

depending on the region of purchase.

10 En

2

Connecting speakers/subwoofer

Positioning speakers

Use the diagram as a reference for positioning speakers.

1 / 2 Front speaker (L/R)

3 Center speaker

4 / 5 Surround speaker (L/R)

9 Subwoofer

When connecting 6-ohm speakers

(U.S.A. and Canada models only)

Set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the

speaker impedance” under “Connecting speakers” in the Owner’s Manual.

Precautions for connecting speaker cables

• Be sure that the unit and subwoofer are turned off.

• Prepare speaker cables in a place away from the unit, to avoid accidentally

dropping wire strands into the unit's interior which could result in a short

circuit or malfunction of the unit.

• Improper connection of speaker cables could cause a short circuit resulting

in damage to, or malfunctioning of, the unit or speakers.

– Carefully remove approximately 10 mm

(3/8") of insulation from the speaker-

connection ends of the cables, and twist

the bare wires of each speaker cable

together firmly.

– Do not allow the bare wires of separate speaker

cables to come into contact with one another.

– Do not allow speaker cable bare wires to come into

contact with metal parts on the unit (rear panel and

screws).

If “Check SP Wires” is shown on the front display when the unit is turned on,

turn off the unit and be sure that speaker cables have not caused a short

circuit.

4

1

2

5

3

9

10° to 30° 10° to 30°

10 mm

(3/8")

En 11

FRONT

SPEAKERS

CENTER

SURROUND/BI-AMP

PRE OUT

SUBWOOFER

21 34

INPUT

9

Subwoofer

2

Front speaker (R)

10 mm

(3/8")

1

Front speaker (L)

3

Center speaker

5

Surround speaker (R)

4

Surround speaker (L)

Use a subwoofer equipped with

built-in amplifier.

Audio pin cable

12 En

3

Connecting external devices

HDMI

ARC

HDMI HDMI

(BD/DVD)

2

3

1

HDMI

(HDCP2.2)

4

(HDCP2.2)

ARC

HDMI OUT

HDMI HDMI HDMI

HDMI

TV BD/DVD player Satellite/cable set top box

HDMI input

HDMI output HDMI output

En 13

4

Connecting the FM/AM antennas

FM antenna (supplied)

AM antenna (supplied)

Hold down Insert Release

Assembling the AM antenna

Place the AM

antenna on a flat

surface.

Fix the end of the

FM antenna to a

wall.

14 En

5

Connecting the power cable to an AC wall outlet,

and turning on the unit

1 Plug the power cable into an AC wall outlet.

2 Press z (receiver power) to turn on the unit.

3 Turn on the TV and switch the TV input to display

video from the unit (HDMI OUT jack).

Warning

Before connecting the power cable

(Taiwan, Brazil, and Central and South America models only)

Set the switch position of VOLTAGE SELECTOR according to your local

voltage.

Voltages are AC 110–120/220–240 V, 50/60 Hz.

110V

-

120V

220V

-

240V

VOLTAGE SELECTOR

To an AC wall outlet

VOLTAGE SELECTOR

PROGRAM

STRAIGHT

ENHANCER BASS

BD

DVD

TV

SCENE

RADIO

SLEEP

DIRECT

CD

P

R

OG

R

A

M

S

T

R

AI

G

HT

ENHAN

C

E

R

B

A

SS

BD

D

VD

T

V

SC

E

N

E

RADI

O

S

LEE

P

D

IRE

CT

C

D

z

En 15

6

Optimizing the speaker settings automatically

(YPAO)

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s),

and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.

12

3

9

54

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

VOLUME

AM

INPUT

ENTER

BLUE

YELLOWGREEN

RED

USB

BLUETOOTH

T

UNIN

G

PRE

S

E

T

TUNIN

G

MEM

O

R

Y

TOP MENU

H

O

ME

P

O

P-

U

P

/

MEN

U

DI

S

P

L

A

Y

A

RETURN

P

SETUP

O

OPTION

BLU

E

Y

E

L

O

L

W

O

G

R

E

N

R

E

D

M

U

T

E

V

OLUME

AM

I

N

P

U

T

U

SB

BLUE

T

O

TH

ENTER

Note the following regarding

YPAO measurement

• Test tones are output at high

volume and may surprise or

frighten small children.

• Test tone volume cannot be

adjusted.

• Keep the room as quiet as

possible.

• Stay in a corner of the room

behind the listening position

so that you do not become an

obstacle between speakers

and the YPAO microphone.

• Do not connect headphones.

Ear height

Listening position

YPAO microphone

Cursor keys

16 En

1 Turn on the subwoofer and set the volume to half.

If the crossover frequency is adjustable, set it to maximum.

2 Place the YPAO microphone at your listening

position and connect it to the YPAO MIC jack on

the front panel.

The screen below appears on the TV.

Note

Place the YPAO microphone at your listening position (same height as your ears).

We recommend the use of a tripod as a microphone stand. You can use the tripod

screws to stabilize the microphone.

3 Press ENTER.

The measurement will start in 10 seconds.

It takes about 3 minutes to measure.

The screen below appears on the TV when the measurement finishes.

Note

If an error message (such as E-1) or warning message (such as W-2) appears,

see “Error messages” or “Warning messages” under “Optimizing the speaker

settings automatically (YPAO)” in the Owner’s Manual.

4 Confirm the results displayed on the screen and

press ENTER.

5 Use the cursor keys (e/r) to select “SAVE” (Save)

and press ENTER.

6 Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

VOLUME

CROSSOVER/

HIGH CUT

MIN MAX

En 17

Playback

This section describes basic operations such as playing Blu-ray Discs and DVDs, and tuning into radio stations. Most operations can be performed using the

remote control.

Basic playback functions

MUTE

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM

VOLUME

PROGRAM

AM

STRAIGHT

ENHANCER BASS

INPUT

BD

DVD

TV

SCENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

CD

USB

BLUETOOTH

T

O

P MENU

H

O

ME

PO

P-UP

/

MENU

DI

S

P

L

A

Y

A

RETURN

P

SETUP

O

OPTION

BD

D

VD

T

V

SC

E

N

E

R

ADI

O

S

LEE

P

E

NTE

R

B

LU

E

Y

E

L

O

L

W

O

G

R

E

N

R

E

D

CD

Select an input source

Adjust the volume level

Mute the audio output

Turn on/off (standby) the unit

The unit is equipped with a variety of sound

programs and surround decoders that allow you to

enjoy playback sources in your favorite sound

mode.

STRAIGHT: Input sources will be played without any

sound field effects.

DIRECT: Input sources will be played using only those

functions absolutely vital to playback to minimize noise

generated by electronic circuitry. Functions such as the

front panel display will be temporarily disabled to

achieve Hi-Fi sound quality.

ENHANCER: Compressed music stored on a Bluetooth

device or USB storage device will be played with

additional depth and breadth.

BASS: Extra bass allows you to enjoy enhanced bass

sounds.

PROGRAM (e/r): Sound programs optimized for

movie, music, and stereo playback, as well as playback

using a Surround Decoder, are available.

18 En

Playing a BD/DVD

We recommend playing back multichannel audio (5.1-

channel or more) to feel surround sound produced by

the unit.

1 Turn on the BD/DVD player.

2 Press INPUT (q/w) repeatedly to

select “HDMI 1”.

The name of the connected device such as “BD

player” may be displayed.

3 Start playback on the BD/DVD

player.

4 Press STRAIGHT to select

“STRAIGHT”.

Note

When “STRAIGHT” (straight decode) is enabled, each

speaker produces each channel audio signal directly

(without sound field processing).

5 Press VOLUME to adjust the

volume.

Note

When sound is not heard, or no sound is output from a specific

speaker, see “TROUBLESHOOTING” in the Owner’s Manual.

Listening to FM/AM radio

1 Press FM or AM to select “TUNER”

as the input source.

2 Press TUNING to set a frequency.

Hold down the key for about a second to search

stations automatically.

“TUNED” lights up when the unit is receiving an FM/

AM radio station signal.

“STEREO” lights up when the unit is receiving a

stereo FM radio signal.

MUTE

ENHANCER

STEREO

TUNED

SLEEP

ECO

CHARGE

ADAPTIVE DRC

VIRTUAL

BD Player

VOL.

OUT

Input source Device name

Setting the frequency steps (Asia, Taiwan,

Brazil, and Central and South America models

only)

At the factory, the frequency step setting is set to 50 kHz

for FM and 9 kHz for AM.

Depending on your country or region, set the frequency

steps to 100 kHz for FM and 10 kHz for AM.

1 Set the unit to standby mode.

2 Hold down STRAIGHT on the front panel and press

z.

3 Press PROGRAM on the front panel repeatedly to

select “TU”.

4 Press STRAIGHT on the front panel to select

“FM100/AM10”.

5 Press z to set the unit to standby mode and turn it

on again.

ENHANCER

LINK

ECO

MASTER

OUT

2

-

R

es

Hi

YPAO

VOL.

A

-

DRC

SLEEP

PARTY

ZONE

A2B3

FPR

SBL SB SBR

FPL

MUTE VIRTUAL

VOL.

SL

SW

SR

STEREO

TUNED

FM 98.50MHz

ENHANCER

LINK

ECO

MASTER

OUT

2

-

R

es

Hi

YPAO

VOL.

A

-

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

A2B3

VOL.

FPR

SL

SW

SR

SBL SB SBR

FPL

MUTE VIRTUAL

TU••••FM50/AM9

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM

VOLUME

PROGRAM

AM

STRAIGHT

ENHANCER BASS

INPUT

BD

DVD

TV

SCENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

CD

USB

BLUETOOTH

PRE

S

E

T

MEM

O

R

Y

TOP MENU

H

O

ME

P

O

P-

U

P

/

MEN

U

DI

S

P

L

A

Y

A

RETURN

P

SETUP

O

OPTION

ENTER

BLU

E

M

U

T

E

P

R

OG

R

A

M

ENHAN

C

E

R

B

A

SS

BD

D

VD

T

V

SC

EN

E

RADIO

S

LEE

P

Y

E

L

O

LL

W

O

G

R

E

N

R

E

D

IRE

CT

C

D

U

SB

BLUE

T

O

TH

VOLUME

( / )

STRAIGHT

INPUT

(

q

/

w

)

TUNING

FM

AM

En 19

SCENE function

Unit input sources and settings that have been assigned

to SCENE keys can be selected with a single touch

(SCENE function). When a SCENE key is pressed, the

unit turns on automatically if it is in standby mode.

By default, the following settings have been assigned to

each SCENE key.

Registering a scene

The settings assigned to each SCENE key by default

can be changed to suit individual preferences.

1. Play an input source.

2. Apply settings for functions such as Sound programs

and Compressed Music Enhancer.

3. Press and hold a SCENE key until “SET Complete”

appears on the front display.

Playing music stored on a

Bluetooth

®

device

1 Press BLUETOOTH to select

“Bluetooth” as the input source.

2 Hold down MEMORY for more than

3 seconds.

“Searching…” appears in the front display.

3 Turn on the BLUETOOTH function

on your device, and select the

model name of the unit from the

BLUETOOTH device list on your

device.

If the passkey is required, enter the number “0000”.

When the connection is established, the

indicator will glow in the front display.

4 Select a song and start playback on

the Bluetooth device.

Note

Audio playing on the unit can be transmitted to Bluetooth

wireless speakers or headphones (except when Bluetooth is

selected as the unit’s input source). See “Enjoying audio using

Bluetooth speakers/headphones” in the Owner’s Manual for

more information.

SCENE key

Input HDMI1 AUDIO1 AUDIO2 TUNER

Sound program

MOVIE

(Sci-Fi)

STRAIGHT STRAIGHT

STEREO

(5ch

Stereo)

Compressed

Music Enhancer

Off On Off On

SCENE link

playback

On On Off Off

BD

DVD

TV

CD

RADIO

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM

VOLUME

PROGRAM

AM

STRAIGHT

ENHANCER BASS

INPUT

BD

DVD

TV

SCENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

CD

USB

BLUETOOTH

T

UNIN

G

PRE

S

E

T

TUNIN

G

TOP MENU

H

O

ME

P

O

P-

U

P

/

MEN

U

DI

S

P

L

A

Y

A

RETURN

P

SETUP

O

OPTION

ENTER

BLU

E

M

U

T

E

F

M

VOLUME

P

R

OG

R

A

M

AM

S

T

R

AI

G

HT

ENHAN

C

E

R

B

A

SS

I

N

P

U

T

S

LEE

P

Y

E

L

O

LL

W

O

G

R

E

N

R

E

D

IRE

CT

U

SB

SCENE

BLUETOOTH

MEMORY

20 En

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

FM

VOLUME

PROGRAM

AM

STRAIGHT

ENHANCER BASS

INPUT

BD

DVD

TV

SCENE

RADIO

SLEEP

ENTER

BLUE

YELLOWGREEN

RED

DIRECT

CD

USB

BLUETOOTH

T

UNIN

G

PRE

S

E

T

TUNIN

G

MEM

O

R

Y

TOP MENU

H

O

ME

P

O

P-

U

P

/

MEN

U

DI

S

P

L

A

Y

A

RETURN

P

SETUP

BLU

E

M

U

T

E

F

M

VOLUME

P

R

OG

R

A

M

AM

S

T

R

AI

G

HT

ENHAN

C

E

R

B

A

SS

I

N

P

U

T

BD

D

VD

T

V

SC

EN

E

RADIO

S

LEE

P

Y

E

L

O

LL

W

O

G

R

E

N

R

E

D

IRE

CT

C

D

BLUE

T

O

TH

USB

OPTION

ENTER

Playing music stored on a

USB flash drive

1 Connect the USB flash drive to the

USB jack.

Note

Connect the USB flash drive directly to the USB jack. Do

not use an extension cable.

2 Press USB to select “USB” as the

input source.

The browse screen is displayed on the TV.

3 Use the cursor keys to select an

item and press ENTER.

When a song is selected, playback starts and the

playback screen is displayed.

Basic operation of the

Option menu

This section explains basic operation of the Option

menu. The Option menu can be used to configure the

unit’s playback functions according to the input source.

1 Press OPTION.

The Option menu is also displayed on the TV

screen.

2 Use the cursor keys to select an

item and press ENTER.

3 Use the cursor keys to select a

setting.

4 Press OPTION.

For more information, see “Configuring playback

settings for different playback sources (Option menu)” in

the Owner’s Manual.

AUX

STRAIGHT

RADIO

AUDIO

USB

USB flash drive

ENHANCER

LINK

ECO

MASTER

OUT

2

-

R

es

Hi

YPAO

VOL.

A

-

DRC

SLEEP

PARTY

ZONE

A2B3

MUTE VIRTUAL

FPR

SBL SB SBR

FPL

STEREO

TUNED

VOL.

SL

SW

SR

Input Select

Cursor keys

La page charge ...

Yamaha YHT-4950UBL Mode d'emploi

Ce manuel convient également à

Yamaha YHT-4950UBL Mode d'emploi

dans d''autres langues

Documents connexes