Infinix Smart 2 HD Guide de démarrage rapide

Infinix
Marque
Infinix
Modèle
Smart 2 HD
Catégorie
Batteries rechargeables
Taper
Guide de démarrage rapide

Ce manuel convient également à

Infinix
Together we can!
Infinix Smart 2 HD
Quick Guide
Hereby, INFINIX MOBILITY LIMITED
Declares that this Mobile Phone is in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
Infinix
1
Connaître votre téléphone
①
Prise d’écouteurs
② Appareil photo frontal
③ Appareil photo
④
Bouton de volume
⑤ Bouton d’alimentation
⑥ Prise USB
⑦
Flash frontal
⑧ Flash
⑨ Empreintes digitales
9
2
7
4
5
1
6
8
3
Infinix
2
Démarrer
Insérer la carte SIM et la carte mémoire
①Éteignez le téléphone mobile et enlevez le couvercle arrière.
②Insérez correctement la carte SIM dans les emplacements pour cartes.
③Enfin, replacez le couvercle sur le téléphone mobile.
Infinix
3
Charger le téléphone
Vous pouvez charger votre appareil à l'aide d'un chargeur ou en le connectant à un ordinateur à
l'aide d'un câble USB (fourni avec le téléphone).
Remarque: utilisez uniquement un chargeur compatible; une batterie incorporée inamovible.
Le téléphone peut être redémarré en maintenant le bouton d'alimentation pendant 10
secondes.
Infinix
1
CAUTION
1.Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing
loss.
2.Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
3.The product shall only be connected to a USB interface of version USB2.0
4.Adapter shall be installed near the equipment and shall be easily accessible.
5.EUT Temperature:-10℃～+65℃.
6.Charging Temperature: 0
℃～
+55
℃
7. . Adapter 1: U060XKA
Input: 100-240V~50/60Hz 300mA
Output: DC 5.0V 1.2A
Adapter 2: U060XEA
Input: 100-240V~50/60Hz 200mA
Output: DC 5.0V 1.2A
8.The device complies with RF specifications when the device used at 5mm from your body.
9.To prevent possible hearing damage, do not listen at high volume levels for long periods.
10.Earphone and USB cable are shielded.
11.Use the device only with the earphones included, never change the earphones included for another one.
12.This device may be restricted for use,depending on the local network.
Infinix
2
Operating Frequency Band (RF)
：
E-GSM900: 880-915MHz (TX), 925-960MHz (RX);
DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
WCDMA BAND I:1920-1980 MHz (TX), 2110-2170 MHz (RX);
Bluetooth: 2400-2483.5 MHz (TX/RX);
WiFi: 2412-2472 MHz (TX/RX);
GPS:1.57542GHz
FM:87.5 MHz -108 MHz.
Modulation mode：
GMSK,8PSK(GSM)
BPSK,QPSK,16QAM(WCDMA)
GFSK, π/4- DQPSK, 8DPSK (BT)
GFSK(BLE)
BPSK/QPSK/16QAM/64QAM/DSSS/OFDM/ CCK (WIFI b/g/n)
BPSK(GPS)
RF Output Power
：
GSM900：33dBm±2dB
GSM1800：30dBm±2dB
WCDMA BAND I:24dBm+1.7dB/-3.7dB
Bluetooth：0-10dBm
Wifi: 14dBm+/-3dB
Infinix
3
Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES
Body parts
Test value
Test distance
Limit
Head
0.656W/Kg10g
0mm
2.0 W/Kg10g
Body
0.550W/Kg10g
5mm
2.0 W/Kg10g
DOC information available on the Internet:
www.infinixmobility.com
Infinix
4
Declaration of conformity
We
：
INFINIX MOBILITY LIMITED
(Name of manufacturer)
RMS 05-15, 13A/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON RD TST KLN HONG KONG.
(Address)
declare under our own responsibility that the product
Product name : Mobile phone
Model No.: X609
Trademark: Infinix
(Including product name, model No. descriptions,versions and supplementary characteristics)
to which this declaration refers conforms with the relevant standards or other standardising documents
3.1a Health: EN 50360:2017
EN 50566:2017
EN 62479:2010
3.1a Safety:EN60950-1:2006+A11:2009+A1:2010+A12:2011+ A2:2013
3.1b EMC: Draft ETSI EN 301 489-1 V2.2.0 (2017-03)
Draft ETSI EN 301 489-17 V3.2.0 (2017-03)
Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Infinix
5
EN 55032:2015
EN 55035:2017
EN61000-3-2:2014
EN61000-3-3:2013
3.2 Radio: ETSI EN 301 511 V12.5.1 (2017-03)
ETSI EN 301 908-1 V11.1.1 (2016-07)
ETSI EN 301 908-2 V11.1.2 (2017-08)
ETSI EN 300 328 V2.1.1 (2016-11)
ETSI EN 303 413 V1.1.1 (2017-06)
Final Draft ETSI EN 303 345 V1.1.7(2017-03)
Software Version：X609-H8025AB-GO-180911V63
Hardware Version
：
V2.0
Adapter 1: U060XKA
Input: 100-240V~50/60Hz 300mA
Output: DC 5.0V 1.2A
Adapter 2: U060XEA
Input: 100-240V~50/60Hz 200mA
Output: DC 5.0V 1.2A
Li-Polymer Battery : BL-34BX
Rated Voltage: 3.8V
Rated Capacity: 3400mAh/12.92Wh
Typical Capacity: 3500mAh/13.30Wh
Limited Charge Voltage: 4.35V
Infinix
6
1.Notified body involved: TÜV Rheinland LGA Products GmbH, 0197.
2.Performed conformity assessment according to Directive Annex III Module B of the 2014/53/EU Radio Equipment
Directive (RED) and issued the EU-type examination certificate.
3.This declaration of conformity is issued under the sole responsibility of the manufacturer.
4.The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Directive 2014/53/EU
Other Union harmonisation legislation where applicable.
Place and date of issue (of this DoC): Shenzhen/2018-9-27
Yiting,Luo/Manager
(Name / Title)
(Name and signature of person responsible)
Infinix
7
CAUTION
1.Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing
loss.
2.Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
3.The product shall only be connected to a USB interface of version USB2.0
4.Adapter shall be installed near the equipment and shall be easily accessible.
5.EUT Temperature:-10℃～+65℃.
6.Charging Temperature: 0
℃～
+55
℃
7. . Adapter 1: U060XKA
Input: 100-240V~50/60Hz 300mA
Output: DC 5.0V 1.2A
Adapter 2: U060XEA
Input: 100-240V~50/60Hz 200mA
Output: DC 5.0V 1.2A
8.The device complies with RF specifications when the device used at 5mm from your body.
9.To prevent possible hearing damage, do not listen at high volume levels for long periods.
10.Earphone and USB cable are shielded.
11.Use the device only with the earphones included, never change the earphones included for another one.
12.This device may be restricted for use,depending on the local network.
Infinix
8
Operating Frequency Band (RF)
：
E-GSM900: 880-915MHz (TX), 925-960MHz (RX);
DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
WCDMA BAND I:1920-1980 MHz (TX), 2110-2170 MHz (RX);
WCDMA BAND VIII: 880-915MHz (TX), 925-960MHz (RX);
Bluetooth: 2400-2483.5 MHz (TX/RX);
WiFi: 2412-2472 MHz (TX/RX);
GPS:1.57542GHz
FM:87.5 MHz-108 MHz.
Modulation mode
：
GMSK (GSM)
BPSK,QPSK,16QAM(WCDMA)
GFSK,
π
/4- DQPSK, 8DPSK (BT)
GFSK(BLE)
CCK for IEEE 802.11b(WiFi)
OFDM for IEEE 802.11g/n (HT-20) /HT-40 (WiFi)
BPSK(GPS)
RF Output Power
：
GSM900：33dBm±2dB
GSM1800：30dBm±2dB
WCDMA BAND I/VIII:24dBm+1.7dB/-3.7Db
Bluetooth：0-10dBm
Wifi: 14dBm+/-3dB
Infinix
9
Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES
Body parts
Test value
Test distance
Limit
Head
0.902W/Kg10g
0mm
2.0 W/Kg10g
Body
0.512W/Kg10g
5mm
2.0 W/Kg10g
DOC information available on the Internet:
www.infinixmobility.com
Infinix
10
Declaration of conformity
We
：
INFINIX MOBILITY LIMITED
(Name of manufacturer)
RMS 05-15, 13A/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON RD TST KLN HONG KONG.
(Address)
declare under our own responsibility that the product
Product name : Mobile Phone
Model No.: X609
Trademark: Infinix
(Including product name, model No. descriptions,versions and supplementary characteristics)
to which this declaration refers conforms with the relevant standards or other standardising documents
3.1a Health: EN 50360:2017
EN 50566:2017
EN 62479:2010
3.1a Safety:EN60950-1:2006+A11:2009+A1:2010+A12:2011+ A2:2013
3.1b EMC: Draft ETSI EN 301 489-1 V2.2.0 (2017-03)
Draft ETSI EN 301 489-17 V3.2.0 (2017-03)
Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Infinix
11
EN 55032:2015
EN 55035:2017
EN61000-3-2:2014
EN61000-3-3:2013
3.2 Radio: ETSI EN 301 511 V12.5.1 (2017-03)
ETSI EN 301 908-1 V11.1.1 (2016-07)
ETSI EN 301 908-2 V11.1.2 (2017-08)
ETSI EN 300 328 V2.1.1 (2016-11)
ETSI EN 303 413 V1.1.1 (2017-06)
Final Draft ETSI EN 303 345 V1.1.7(2017-03)
Software Version：X609-H8025AB-GO-180928V85
Hardware Version
：
V2.0
Adapter 1: U060XKA
Input: 100-240V~50/60Hz 300mA
Output: DC 5.0V 1.2A
Adapter 2: U060XEA
Input: 100-240V~50/60Hz 200mA
Output: DC 5.0V 1.2A
Li-Polymer Battery : BL-34BX
Rated Voltage: 3.8V
Rated Capacity: 3400mAh/12.92Wh
Typical Capacity: 3500mAh/13.30Wh
Limited Charge Voltage: 4.35V
Infinix
12
1.Notified body involved: TÜV Rheinland LGA Products GmbH, 0197.
2.Performed conformity assessment according to Directive Annex III Module B of the 2014/53/EU Radio Equipment
Directive (RED) and issued the EU-type examination certificate.
3.This declaration of conformity is issued under the sole responsibility of the manufacturer.
4.The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Directive 2014/53/EU
Other Union harmonisation legislation where applicable.
Place and date of issue (of this DoC): Shenzhen/2018-9-27
Yiting,Luo/Manager
(Name / Title)
(Name and signature of person responsible)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Infinix Smart 2 HD Guide de démarrage rapide

Infinix
Marque
Infinix
Modèle
Smart 2 HD
Catégorie
Batteries rechargeables
Taper
Guide de démarrage rapide
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents