KitchenAid KECC506RWH03 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KECC506RWH03

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Ki|chen_kid ®

ELECTRIC COOKTOP

For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 or visit our website at

www.kitchenaid.com

In Canada, call 1-800-807-6777 or visit our website at www.KitchenAid.ca

TABLE DE CUISSON ELECTRIQUE

Au Canada, pour assistance, installation ou service, composer le 1-800-807-6777 ou visiter notre site Web au www.KitchenAid.ca

Table of Contents/Table des matieres ............................................................................. 2

Models/Modeles KECC056 KECC506 KECC507 KECC508 KE00566 KECC567 KECC568 KECV568

8286608

NOTE: This manual covers different models. Refer to the Table of Contents for information regarding your cooktop model.

REMARQUE : Ce manuel couvre differents modeles. Consulter la Table des matieres pour des renseignements concernant le modele

de votre table de cuisson.

TABLE OF CONTENTS TABLE DES MATIERES

COOKTOP SAFETY ........................................................................ 3

PARTS AND FEATURES - TOUCH-ACTIVATED

ELECTRONIC CONTROL MODELS ............................................. 5

COOKTOP CONTROLS - TOUCH-ACTIVATED

ELECTRONIC CONTROL MODELS ............................................. 6

Dual/Triple Circuit Element .......................................................... 6

Bridge Element ............................................................................. 7

Control LocWAII Off ...................................................................... 7

Melt & Hold Function ................................................................... 7

Keep Warm Function ................................................................... 7

PARTS AND FEATURES - SMART KNOB MODELS ................... 8

COOKTOP CONTROLS - SMART KNOB MODELS .................... 9

Dual/Triple-Circuit Element ........................................................ 10

Bridge Element ........................................................................... 10

Warm Function ........................................................................... 10

PARTS AND FEATURES - TRADITIONAL KNOB MODELS..... 11

COOKTOP CONTROLS - TRADITIONAL KNOB MODELS ...... 12

Dual/Triple-Circuit Element ........................................................ 12

Bridge Element (on 36" [91.4 cm] models) ................................ 13

COOKTOP USE ............................................................................ 13

Ceramic Glass ............................................................................ 13

Home Canning ........................................................................... 14

Cookware ................................................................................... 14

COOKTOP CARE .......................................................................... 14

General Cleaning ........................................................................ 14

TROUBLESHOOTING .................................................................. 15

ASSISTANCE OR SERVICE ......................................................... 16

In the U.S.A ................................................................................ 16

In Canada ................................................................................... 16

WAR RAN TY .................................................................................. 17

SI_CURITI_ DE LA TABLE DE CUISSON .................................... 18

pII_CES ET CARACTI_RISTIQUES - MODI_LES A

COMMANDE I_LECTRONIQUE TACTILE ................................... 20

COMMANDES DE LA TABLE DE CUISSON - MODI_LES A

COMMANDE I_LECTRONIQUE TACTILE ................................... 21

121ementa double/triple circuit ................................................... 22

121ementde pont (sur les modeles de 36" (91,4cm) ................... 22

Control LocWAII Off (verrouillage des commandes/toutes

commandes eteintes) ................................................................. 23

Fonction Melt & Hold (fondre et garder) .................................... 23

Fonction Keep Warm (maintien au chaud) ................................. 23

PIECES ET CARACTERISTIQUES - MODELES A

BOUTON INTELLIGENT ............................................................... 24

COMMANDES DE LA TABLE DE CUISSON - MODELES

.,_BOUTON INTELLIGENT ........................................................... 25

121ementa double/triple circuit ................................................... 26

Element de pont (sur les modeles de 36" (91,4cm) ................... 27

Fonction Warm (maintien au chaud) .......................................... 27

PIECES ET CARACTERISTIQUES - MODELES A

BOUTON STANDARD .................................................................. 28

COMMANDES DE LA TABLE DE CUISSON - MODELES

.,_BOUTON STANDARD ............................................................... 2g

121ementa double/triple circuit ................................................... 30

121ementde pont (sur les modeles de 36" (91,4cm) ................... 30

UTILISATION DE LA TABLE DE CUISSON ................................ 31

Vitroceramique ........................................................................... 31

Preparation de conserves a la maison ....................................... 31

Ustensiles de cuisson ................................................................ 32

ENTRETIEN DE LA TABLE DE CUISSON .................................. 32

Nettoyage genGral...................................................................... 32

DI_PANNAGE ................................................................................. 33

ASSISTANCE OU SERVICE ......................................................... 34

GARANTI E ..................................................................................... 35

COOKTOP SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the cooktop, follow

basic precautions, including the following:

,, CAUTION: Do not store items of interest to children in

cabinets above a cooktop - Children climbing on the

cooktop to reach items could be seriously injured.

i Proper Installation - Be sure your cooktop is properly

installed and grounded by a qualified technician.

i Never Use Your Cooktop for Warming or Heating the

Room.

i Do Not Leave Children Alone - Children should not be left

alone or unattended in area where cooktop is in use. They

should never be allowed to sit or stand on any part of the

cooktop.

i Wear Proper Apparel - Loose-fitting or hanging garments

should never be worn while using the cooktop.

i User Servicing - Do not repair or replace any part of the

cooktop unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

i Storage on Cooktop - Flammable materials should not be

stored near surface units.

i Do Not Use Water on Grease Fires - Smother fire or flame

or use dry chemical or foam-type extinguisher.

n Use Only Dry Potholders - Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

n DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS - Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and surfaces

facing the cooktop.

i Use Proper Pan Size - This cooktop is equipped with one

or more surface units of different size. Select utensils

having flat bottoms large enough to cover the surface unit

heating element. The use of undersized utensils will

expose a portion of the heating element to direct contact

and may result in ignition of clothing. Proper relationship of

utensil to burner will also improve efficiency.

i Never Leave Surface Units Unattended at High Heat

Settings - Boilover causes smoking and greasy spillovers

that may ignite.

i Glazed Cooking Utensils - Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for cooktop service without breaking

due to the sudden change in temperature.

i Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units - To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

i Do Not Cook on Broken Cooktop - If cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

i Clean Cooktop With Caution - If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

For units with ventilating hood -

i Clean Ventilating Hoods Frequently - Grease should not

be allowed to accumulate on hood or filter.

i When flaming foods under the hood, turn the fan on.

For units with coil elements -

n Make Sure Reflector Pans or Drip Bowls Are in

Place - Absence of these pans or bowls during

cooking may subject wiring or components

underneath to damage.

i Protective Liners - Do not use aluminum foil to line surface

unit drip bowls, except as suggested in the manual.

Improper installation of these liners may result in a risk of

electric shock, or fire.

i Do Not Soak Removable Heating Elements - Heating

elements should never be immersed in water.

SAVE THESE INSTRUCTIONS

PARTS AND FEATURES

TOUCH-ACTIVATED ELECTRONIC CONTROL MODELS

Control Panels

30" (76.2 cm) Touch-Activated Electronic Control Models

A B

HOT HOT

NOT

36" (91.4 crn) Touch-Activated Electronic Control Models

HOT i

Lo O

M_lt&

B NOT C

A. Left rear touch control (simmer;

keep warm function; melt and

hold function)

B. Right rear touch control

(simmer," keep warm function;

melt and hold function; dual

circuit element)

C. Increase/decrease temperature

touch control

D. Hot surface indicator light

E. Right front touch control

(simmer; keep warm function

melt and hold function)

F. All/Off control lock

G. Left front touch control

(simmer; keep warm function

melt and hold function;

triple-circuit element)

A. Left rear touch control (simmer;

keep warm function; melt and hold

function)

B. Center rear touch control (simmer,"

keep warm function; melt and hold

function; dual circuit element

"bridge")

C. Right rear touch control (simmer;

keep warm function; melt and hold

function)

Cooktops

36" (91.4 cm) Touch-Activated Electronic Control Model shown

B C D

D. Increase/decrease

temperature touch control

E.Hot surface indicator lights

F Right front touch control

(simmer," keep warm function;

melt and hold function)

G. All/Off control lock

H. Left front touch control

(simmer; keep warm function;

melt and hold function;

triple-circuit element)

A ............

A. Ceramic glass cooktop (stainless steel or

painted metal trim on some models)

B. Left rear surface cooking area

C. Center rear surface cooking area (with

dual-circuit element "bridge')

G F

D. Right rear surface cooking area

E. Control panel

F. Right front surface cooking area

G. Left front surface cooking area

(with triple-circuit element)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

COOKTOP CONTROLS

TOUCH-ACTIVATED ELECTRONIC CONTROL MODELS

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

The electronic touch controls offer a variety of heat settings for

optimal cooking results. When melting foods such as chocolate

or butter, or when proofing bread, the surface cooking area can

be set to MELT & HOLD for minimal element operation.

For maximum element operation, all cooktop touch controls can

be set to HI when bringing liquids to a fast and rapid boil. Touch

the minus (-) keypad to immediately reach the HI setting.

NOTE: Where 240V installation is not available, this cooktop will

automatically adjust to 208V operation.

SETTING RECOMMENDED USE

Lo • Provide lowest simmer/heat

SIMMER setting.

• Simmer (range of simmer

temperatures).

Keep Warm Function • Keep cooked foods warm.

Melt & Hold Function • Melt chocolate or butter.

Dual/Triple Circuit • Home canning.

Elements

• Large-diameter cookware.

• Large quantities of food.

I REMEMBER: When cooktop is in use, the entire cooktop

area may become hot.

Hot Surface Indicator Lights (on Touch Control models)

The Hot Surface Indicator Lights are located next to each of the

cooktop touch controls. The Hot Surface Indicator Lights will

glow as long as any surface cooking area is too hot to touch,

even after the surface cooking area(s) is turned off.

To Use:

Touch ON/OFR

Touch the "plus" (+) or "minus" (-) keypads to increase or

decrease power.

3. To choose a power level between HI and MELT & HOLD,

touch and hold either the "+" or "-" keypad until the desired

level has been reached.

4. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all

elements at the same time.

Use the following chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

Hi • Start food cooking.

• Bring liquid to a boil.

Medium High • Hold a rapid boil.

Between Med & Hi

• Quickly brown or sear food.

Med • Maintain a slow boil.

Medium • Fry or saute foods.

Medium Low • Cook soups, sauces and

Between Med & Lo gravies.

• Stew or steam food.

}'lOT

A ...................O

A. Hot surface indicator light

If the cooktop is on when a power failure occurs, the Hot Surface

Indicator Lights will remain on after the power is restored to the

cooktop. They will remain on until the cooktop has cooled

completely.

The dual-size and triple-size elements offer flexibility depending

on the size of the cookware. Single size can be used in the same

way as a regular element. The dual and triple sizes combine

single, dual and outer element and are recommended for larger

cookware, large quantities of food, and home canning.

A. Single size C. Triple size

B. Dual size

To Use:

1. Touch ON/OFE

2. Touch HEAT ZONE SIZE to select desired zone diameter.

3. Choose a power level between HI and MELT & HOLD. Touch

the "plus" (+) or "minus" (-) keypad to increase or decrease

power.

4. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all

elements at the same time.

The bridge element allows maximum flexibility in the center

cooking area.

Use the bridge area to create an oblong heated area to cook with

large cookware.

C ...............................................

A.Single size

B.Bridge area

C.Single size

To use SINGLE (A) or SINGLE and BRIDGE (A + B):

1. Touch ON/OFF (center rear touch control).

2. Touch HEAT ZONE SIZE once for SINGLE and BRIDGE (A+B)

or twice for SINGLE (A).

3. Choose a power level between HI and MELT & HOLD. Touch

the "plus" (+) or "minus" (-) keypads to increase or decrease

power.

4. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all

elements at the same time.

To use SINGLE (C):

1. Touch ON/OFF (right front touch control).

2. Choose a power level between HI and MELT & HOLD. Touch

the "+" or "-" keypads to increase or decrease power.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area, or touch ALL OFF to turn off all elements at the

same time.

To use both Single elements and Bridge (A+B+C):

1. Turn on Single and Bridge (A+B).

2. Turn on Single (C).

3. When finished cooking, touch ON/OFF to turn off surface

cooking area(s) individually, or touch ALL OFF to turn off all

elements at the same time.

{,>t'#

The Control LocWAII Off keypad turns off all surface cooking

areas that are in use at the same time.

The Control Lock cooktop touch control prevents unintended use

of the surface cooking areas. When the cooktop is locked out,

the surface cooking areas cannot be turned on by the cooktop

touch controls.

To Lock Cooktop: Touch and hold the CONTROL LOCK/

ALL OFF keypad for 5 seconds. After 5 seconds, CONTROL

LOCK will glow red, indicating that the cooktop touch controls

are in the lockout position.

To Unlock Cooktop: Touch and hold the CONTROL LOCK/

ALL OFF keypad for 5 seconds.

'd<4t &, t >kt 1: <t:;

The Melt & Hold function is available on all the surface cooking

elements, and is ideal for melting chocolate or butter.

To Use;

1. Touch ON/OFE

2. Touch the "plus" (+) keypad once for MELT & HOLD.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area.

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

The Keep Warm function can be used to keep cooked foods

warm, and may be used whether or not the other surface cooking

zones are in use. One hour is the recommended maximum time

to maintain food quality.

It is not recommended for heating cold foods. When the Keep

Warm function is in use, it will not glow red like the cooking

zones, but the indicator light will glow on the control panel.

Use only cookware and dishes recommended for oven and

cooktop use, and those that have flat bottoms to make direct

contact with the cooktop surface. Use pot holders or oven mitts

to remove cookware.

Cover all foods with a lid or aluminum foil. Do not use plastic

wrap to cover food, as it may melt onto the cooktop surface.

When warming baked goods, allow a small opening in the cover

for moisture to escape.

Food quality may deteriorate if food is kept on the Keep Warm

function for an extended period of time. For best results, keep

food warm for no longer than 30 to 45 minutes.

On models with touch controls, the Keep Warm element is

available on all surface cooking areas, and can be used as either

an element for warming foods, or for normal element operation.

To Use;

1. Touch ON/OFE

2. Touch the "plus" (+) keypad twice for KEEP WARM.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area.

PARTS AND FEATURES- SMART KNOB MODELS

Control Panels

30" (76.2 cm) Smart Knob Models 36" (91.4 cm) Smart Knob Models

HOT

I Me_,f

HOT

POWER

HOT

A. Left rear control (simmer; keep

warm function; melt function)

B. Right rear control (simmer," keep

warm function; melt function;

dual-circuit element)

C. Hot surface indicator light

D. Right front control (simmer,"

keep warm function; melt

function)

E.Power on light

E Left front control (simmer,"

keep warm function; melt

function; triple-circuit

element)

A. Left rear control (simmer; keep

warm function; melt function)

B. Center rear control (simmer; keep

warm function; melt function;

dual circuit element "bridge")

C. Right rear control (simmer; keep

warm function; melt function)

D. Hot surface indicator lights

E.Right front control (simmer,"

keep warm function; melt

function)

F Power on light

G. Left front control (simmer;

keep warm function; melt

function; triple-circuit element)

Cooktops

36" (91.4 cm) Smart Control Model shown

A ..................................................................

H .........

A. Ceramic glass cooktop (stainless steel

models have metal trim)

B. Left rear surface cooking area

C. Center rear surface cooking area (with

dual-circuit element "bridge")

G F

D. Right rear surface cooking area

E. Control panel

F Right front surface cooking area

G. Left front surface cooking area

(with triple-circuit element)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

COOKTOP CONTROLS- SMART KNOB MODELS

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

The knob-activated electronic system controls offer a variety of

heat settings for optimal cooking results. When melting foods

such as chocolate or butter, or when proofing bread, the surface

cooking area can be set to MELT for minimal element operation.

To keep cooked foods warm or to heat serving dishes, the

surface cooking area can be set to WARM.

For maximum element operation, all knob-activated electronic

system controls can be set to HI when bringing liquids to a fast

and rapid boil.

NOTE: Where 240V installation is not available, this cooktop will

automatically adjust to 208V operation.

OFF

To Use:

W M_It H_

The cooktop control can be set anywhere between HI and

MELT.

Push in and turn to desired setting.

Use the following chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

Hi • Bring liquid to a boil.

Medium High • Hold a rapid boil.

Between Med & Hi

• Quickly brown or sear food.

Med • Maintain a slow boil.

Medium • Fry or saute foods.

• Cook soups, sauces and

gravies.

Medium Low • Stew or steam food.

Between Med & Lo

Lo • Simmer (range of simmer

SIMMER temperatures).

Warm • Keep cooked foods warm.

Melt • Melt chocolate or butter.

DualfTriple Circuit • Home canning.

Elements

• Large-diameter cookware.

• Large quantities of food.

I REMEMBER: When cooktop is in use, the entire cooktop I

area may become hot.

Hot Surface Indicator Lights (on Smart Control models)

The Hot Surface Indicator Lights are located next to each of the

cooktop control knobs. The Hot Surface Indicator Lights will glow

as long as any surface cooking area is too hot to touch, even

after the surface cooking area(s) is turned off.

A ..............._.oT_

A. Hot surface indicator light

If the cooktop is on when a power failure occurs, the Hot Surface

Indicator Lights will remain on after the power is restored to the

cooktop. They will remain on until the cooktop has cooled

completely.

Power Light

Each cooktop has a Power On light. The light will glow when any

burner is on.

POWER

The dual-size and triple-size elements offer flexibility depending

on the size of the cookware. Single size can be used in the same

way as a regular element. The dual and triple sizes combine

single, dual and outer element and are recommended for larger

cookware, large quantities of food, and home canning.

I/ /

A.Single size

B.Dualsize

C.Triplesize

To Use SINGLE:

1. Push in and turn knob from the OFF position to the SINGLE

zone anywhere between MELT and HI.

2. Turn knob to OFF when finished.

To Use DUAL:

1. Push in and turn knob from the OFF position to the DUAL

zone anywhere between WARM and HI.

2. Turn knob to OFF when finished.

To Use TRIPLE:

1. Push in and turn knob from the OFF position to the TRIPLE

zone anywhere between MELT and HI.

2. Turn knob to OFF when finished.

The bridge element allows maximum flexibility in the center

cooking area.

Use the bridge area to create an oblong heated area to cook with

large cookware.

f-m

C ..................................................

A. Single size

B. Bridge area

C. Single size

To use SINGLE (A):

1. Push in and turn center rear knob from OFF position to the

SINGLE zone anywhere between MELT and HI.

2. Turn knob to OFF when finished.

To use SINGLE and BRIDGE area (A + B):

1. Push in and turn center rear knob from OFF position to the

BRIDGE zone anywhere between MELT and HI.

2. Turn knob to OFF when finished.

To use SINGLE (C):

1. Push in and turn right front knob from OFF position anywhere

between MELT and HI.

2. Turn knob to OFF when finished.

To use both Single elements and Bridge (A+B+O}:

1. Turn on Single and Bridge (A+B).

2. Turn on Single (C).

3. Turn knob to OFF when finished.

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

The Warm function can be used to keep cooked foods warm, and

may be used whether or not the other surface cooking zones are

in use. One hour is the recommended maximum time to maintain

food quality.

It is not recommended for heating cold foods.

Use only cookware and dishes recommended for oven and

cooktop use, and that have flat bottoms to make direct contact

with the cooktop surface. Use pot holders or oven mitts to

remove cookware.

Cover all foods with a lid or aluminum foil. Do not use plastic

wrap to cover food, as it may melt onto the cooktop surface.

When warming baked goods, allow a small opening in the cover

for moisture to escape.

Food quality may deteriorate if food is kept on the Warm function

for an extended period of time. For best results, keep food warm

for no longer than 30 to 45 minutes.

The Warm element is available on all surface cooking areas, and

can be used as either an element for warming foods, or for

normal element operation.

To Use:

1. Rotate knob to WARM position.

2. When finished cooking, turn knob to OFF position.

PARTS AND FEATURES - TRADITIONAL KNOB MODELS

Control Panels

30" (76.2 crn) Traditional Knob Models 36" (91.4cm) Traditional Knob Models

HOT HOT

OFF OFF

F E D

HOT

i HOT

OFF

POWER HOT

G F E D

A. Left rear control knob

B. Right rear control knob

(dual-circuit element)

C. Hot surface indicator light

D. Right front control knob

E.Power on light

F, Left front control knob

(triple-circuit element)

A. Left rear control knob

B. Center rear control knob

(dual-circuit element "bridge")

C. Right rear control knob

D. Hot surface indicator lights

E.Right front control knob

F Power on light

G. Left front control knob

(triple-circuit element)

Cooktops

36" (91.4 cm) Traditional Knob Model shown

A • •

A. Ceramic glass cooktop (stainless steel

models have metal trim)

B. Left rear surface cooking area

C. Center rear surface cooking area (with

dual-circuit element "bridge")

G F

D. Right rear surface cooking area

E. Control panel

F Right front surface cooking area

G. Left front surface cooking area

(with triple-circuit element)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

COOKTOP CONTROLS - TRADITIONAL KNOB MODELS

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

The controls can be set anywhere between HI and LO.

NOTE: Where 240V installation is not available, this cooktop will

automatically adjust to 208V operation.

OFF

To Use:

Push in and turn knob to desired heat setting.

Use the following chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

Hi • Bring liquid to a boil.

Med Hi

Medium High

Med

Medium

Med Lo

Medium Low

Dual/Triple Circuit

Elements

• Hold a rapid boil.

• Quickly brown or sear food.

• Maintain a slow boil.

• Fry or saute foods.

• Cook soups, sauces and

gravies.

• Stew or steam food.

• Simmer

• Keep cooked foods warm.

• Melt chocolate or butter.

• Home canning.

• Large-diameter cookware.

• Large quantities of food.

I EMEMBER: When cooktop is in use, the entire cooktop

area may become hot.

Hot Surface Indicator Lights

The Hot Surface Indicator Lights are located next to each of the

cooktop controls. The Hot Surface Indicator Lights will glow as

long as any surface cooking area is too hot to touch, even after

the surface cooking area(s) is turned off.

A ....................'_o_,

A. Hot surface indicator light

If the cooktop is on when a power failure occurs, the Hot Surface

Indicator Lights will remain on after the power is restored to the

cooktop. They will remain on until the cooktop has cooled

completely.

Power Light

Each cooktop has a Power On light. The light will glow when any

burner is on.

POWER

The dual-size and triple-size elements offer flexibility depending

on the size of the cookware. Single size can be used in the same

way as a regular element. The dual and triple sizes combine

single, dual and outer element and are recommended for larger

cookware, large quantities of food, and home canning.

A.Single size

B.Dualsize

C.Triplesize

To Use SINGLE:

1. Push in and turn knob from the OFF position to the SINGLE

zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

To Use DUAL and TRIPLE:

1. Push in and turn knob from the OFF position to the DUAL or

TRIPLE zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

The bridge element allows maximum flexibility in the center

cooking area.

Use the bridge area to create an oblong heated area to cook with

large cookware.

C ...............................................

To use SINGLE and BRIDGE area (A + B):

1. Push in and turn center rear knob from OFF position to the

BRIDGE zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

To use SINGLE (A):

1. Push in and turn center rear knob from OFF position to the

SINGLE zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

To use SINGLE (C):

1. Push in and turn right front knob from OFF position anywhere

between LO and HI.

2. Turn knob to OFF when finished.

To use both Single elements and Bridge (A+B+C):

1. Turn on Single and Bridge (A+B).

2. Turn on Single (C).

3. Turn knob to OFF when finished.

A.Single size

B.Bridge area

C.Single size

COOKTOP USE

The surface cooking area will glow red when an element is on. It

may cycle on and off to maintain the selected heat level•

It is normal for the surface of white ceramic glass to appear to

change color when surface cooking areas are hot. As the glass

cools, it will return to its original color•

Wiping off the cooktop before and after each use will help keep it

free from stains and provide the most even heating. On cooktops

with white ceramic glass, soils and stains may be more visible,

and may require more cleaning and care. For more information,

see "General Cleaning" section.

• Do not store jars or cans above the cooktop. Dropping a

heavy or hard object onto the cooktop could crack the

cooktop.

• Do not leave a hot lid on the cooktop. As the cooktop cools,

air can become trapped between the lid and the cooktop,

and the ceramic glass could break when the lid is removed.

For foods containing sugar in any form, clean up all spills and

soils as soon as possible. Allow the cooktop to cool down

slightly• Then, while wearing oven mitts, remove the spills

while the surface is still warm. If sugary spills are allowed to

cool down, they can adhere to the cooktop and can cause

pitting and permanent marks.

Do not slide cookware or bakeware across the cooktop.

Aluminum or copper bottoms and rough finishes on

cookware or bakeware could leave scratches or marks on the

cooktop.

• Do not cook popcorn in prepackaged aluminum containers

on the cooktop. They could leave aluminum marks that

cannot be removed completely•

• Do not allow objects that could melt, such as plastic or

aluminum foil, to touch any part of the entire cooktop.

Use cookware about the same size as the surface cooking

area. Cookware should not extend more than 1/2"(1.3 cm)

outside the area.

"_ .............................B

A. Surface cooking area

B. Cookware/canner

C. _±" (1.3 cm) maximum overhang

Use flat-bottomed cookware for best heat conduction and

energy efficiency. Cookware with rounded, warped, ribbed or

dented bottoms could cause uneven heating and poor

cooking results.

Determine flatness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the ruler,

no space or light should be visible between it and the

cookware.

Cookware designed with slightly indented bottoms or small

expansion channels can be used.

Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated•

• Do not cook foods directly on the cooktop.

• Do not use the cooktop as a cutting board•

When canning for long periods, alternate the use of surface

cooking areas, elements or surface burners between batches.

This allows time for the most recently used areas to cool.

• Center the canner on the grate or largest surface cooking

area or element. Canners should not extend more than

1/2"(1.3 cm) outside the cooking area.

• Do not place canner on 2 surface cooking areas, elements or

surface burners at the same time.

• On ceramic glass models, use only flat-bottomed canners.

• For more information, contact your local agricultural

department. Companies that manufacture home canning

products can also offer assistance.

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides, a well-

fitting lid and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop. Aluminum and copper

may be used as acore or base in cookware. However, when used

as a base they can leave permanent marks on the cooktop or

grates.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has

the same characteristics as its base material. For example,

aluminum cookware with a nonstick finish will take on the

properties of aluminum.

Use the following chart as a guide for cookware material

characteristics.

COOKWARE CHARACTERISTICS

Aluminum • Heats quickly and evenly.

Cast iron

Ceramic or

Ceramic glass

Copper

Earthenware

Porcelain enamel-

on-steel or cast

iron

• Suitable for all types of cooking.

• Medium or heavy thickness is best

for most cooking tasks.

• Heats slowly and evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

• Follow manufacturer's instructions.

• Heats slowly, but unevenly.

• Ideal results on low to medium heat

settings.

• Heats very quickly and evenly.

• Follow manufacturer's instructions.

• Use on low heat settings.

• See stainless steel or cast iron.

Stainless steel • Heats quickly, but unevenly.

• A core or base of aluminum or

copper on stainless steel provides

even heating.

COOKTOP CARE

IMPORTANT: Before cleaning, make sure all controls are off and

the cooktop is cool. Always follow label instructions on cleaning

products.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

STAINLESS STEEL/PAINTED TRIM (on some models)

Do not use soap-filled scouring pads, abrasive cleaners, Cooktop

Cleaner, steel-wool pads, gritty washcloths or some paper

towels. Damage may occur.

Rub in direction of grain to avoid damaging.

• KitchenAid _ Stainless Steel Cleaner & Polish (not included):

See "Assistance or Service" section to order.

• Liquid detergent or all-purpose cleaner: Rinse with clean

water and dry with soft, lint-free cloth.

• Vinegar for hard water spots.

COOKTOP CONTROLS

Do not remove seals under knobs.

• Soap and water or dishwasher:

Pull knobs straight away from control panel to remove

CERAMIC GLASS

Do not use steel wool, abrasive powder cleansers, chlorine

bleach, rust remover or ammonia because damage may occur.

Always wipe with a clean, wet cloth or sponge and dry thoroughly

to prevent streaking and staining.

Cooktop Cleaner is recommended for regular use to help prevent

scratches, pitting and abrasions, and to condition the cooktop. It

may be ordered as an accessory. See "Assistance or Service"

section to order.

A Cooktop Scraper is also recommended for stubborn soils, and

can be ordered as an accessory. See "Assistance or Service"

section to order. The Cooktop Scraper uses razor blades. Store

razor blades out of the reach of children.

Do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs.

When replacing knobs, make sure knobs are in the Off position.

Light to moderate soil

• Paper towels or clean damp sponge:

Clean while the cooktop is still warm. You may want to wear

oven mitts while cleaning the cooktop.

Sugary spills (jellies, candy, syrup)

• Cooktop Scraper:

Clean while the cooktop is still warm. You may want to wear

oven mitts while cleaning the cooktop.

Cooktop Cleaner and clean damp paper towel:

Clean as soon as cooktop has cooled down. Rub creme into

surface with a damp paper towel or soft cloth. Continue

rubbing until white film disappears.

Heavy soil, dark streaks, specks and discoloration

• Cooktop Cleaner or nonabrasive cleanser:

Rub product into soil with a damp paper towel or soft cloth.

Continue rubbing until white film disappears.

Burned-on soil

• Cooktop Cleaner and Cooktop Scraper:

Rub creme into soil with damp paper towel. Hold scraper as

flat as possible on surface and scrape. Repeat for stubborn

spots. Polish entire cooktop with creme and paper towel.

Metal marks from aluminum and copper

• Cooktop Cleaner:

Clean as soon as cooktop has cooled down. Rub creme into

surface with a damp paper towel or soft cloth. Continue

rubbing until white film disappears. The marks will not totally

disappear but after many cleanings become less noticeable.

Tiny scratches and abrasions

• Cooktop Cleaner:

Rub creme into surface with a damp paper towel or soft

cloth. Continue rubbing until white film disappears. Scratches

and abrasions do not affect cooking performance and after

many cleanings become less noticeable.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

• Is the cooktop wired properly? See the Installation

Instructions for more information.

• Has a household fuse blown, or has a circuit breaker

tripped? Replace the fuse or reset the circuit breaker. Ifthe

problem continues, call an electrician.

Cooktop will not operate

• On models with knob controls, is the control knob set

correctly? Push in the knob before turning to a setting.

• On models with electronic touch controls, is the cooktop

control set correctly? Touch ON/OFF before selecting a

setting.

• On models with touch controls, is the "Control Lock/ALL

OFF" Cooktop Lockout set? See "Control LocWAII Off"

section.

Excessive heat around cookware on cooktop

Is the cookware the proper size? Use cookware about the

same size as the surface cooking area, element or surface

burner. Cookware should not extend more than V2"(1.3 cm)

outside the cooking area.

Cooktop has flashing lights

• Are there lights on the cooktop flashing on and off?

1. Make sure the cooktop controls are OFE

2. Clean the cooktop touch control panel thoroughly. See

"General Cleaning" section.

3. Ifthe cooktop lights continue to flash, disconnect power

or unplug the cooktop.

4. After a few seconds, reconnect power or plug in the

cooktop.

5. Ifthe lights continue to blink on and off, call for service.

Cooktop cooking results not what expected

• Is the proper cookware being used? See "Cookware"

section.

• Is the cooktop control set to the proper heat level? See

"Cooktop Controls" section.

• Is the appliance level? Level the appliance. See the

Installation Instructions.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

Accessories U.S.A.

To order accessories, call the KitchenAid Customer eXperience

Center toll free at 1-800-442-9991 and follow the menu prompts.

Or visit our website at www.kitchenaid.com and click on "Shop-

Online," then "Accessories." Portable appliances, bakeware,

cookware, gadgets and textiles are also available.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only factory specified parts. These factory specified parts will

fit right and work right because they are made with the same

precision used to build every new KITCHENAID ® appliance.

To locate factory specified parts in your area, call us or your

nearest KitchenAid designated service center.

Cooktop Cleaner

(ceramic glass models)

Order Part Number 31464

Cooktop Protectant

(ceramic glass models)

Order Part Number 31463

Call the KitchenAid Customer eXperience Center toll free:

1-800-422-1230.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Installation information.

• Accessory and repair parts sales.

• Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in the United States.

To locate the KitchenAid designated service company in your

area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to KitchenAid with

any questions or concerns at:

KitchenAid Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Cooktop Scraper

(ceramic glass models)

Order Part Number WA906B

KitchenAid _Stainless Steel Cleaner & Polish

(stainless steel models)

Order Part Number 8171420

All-Purpose Appliance Cleaner

Order Part Number 31662

Please call the KitchenAid Canada Customer Interaction Centre

toll free: 1-800-807-6777.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Use and maintenance procedures.

• Accessory and repair parts sales.

• Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid Canada designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to KitchenAid

Canada with any questions or concerns at:

Customer Interaction Centre

KitchenAid Canada

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

KITCHENAID ®COOKTOP WARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, KitchenAid or KitchenAid Canada (hereafter "KitchenAid') will pay for factory specified parts and repair

labor to correct defects in materials or workmanship. Service must be provided by a KitchenAid designated service company.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CERTAIN COMPONENT PARTS

In the second through fifth years from the date of purchase, when this appliance is operated and maintained according to instructions

attached to or furnished with the product, KitchenAid or KitchenAid Canada will pay for factory specified parts for the following

components if defective in materials or workmanship:

• Electric elements

• Gas burners

• Solid statetouch control system parts

• Any cracking of the rubber seal between the ceramic glass cooktop and porcelain edge

• Any cracking due to thermal shock of the ceramic glass cooktop

• Surface unit elements

ITEMS KITCHENAID WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair

house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by KitchenAid.

5. Replacement parts or repair labor costs for units operated outside the United States or Canada.

6. Pickup and delivery. This major appliance is designed to be repaired in the home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

8. Expenses for travel and transportation for product service in remote locations.

9. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. KITCHENAID SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATETO STATE OR PROVINCE

TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized KitchenAid dealer to determine if

another warranty applies.

If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," additional help

can be found by checking the "Assistance or Service" section or by calling KitchenAid. In the U.S.A., call 1-800-422-1230. In Canada,

call 1-800-807-6777. 9/05

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

P P

SECURITE DE LA TABLE DE CUISSON

Votre s6curit6 et celle des autres est trbs importante.

Nous donnons de nombreux messages de securite importants dans ce manuel et sur votre appareil menager. Assurez-vous de

toujours lire tousles messages de securite et de vous y conformer.

Voici le symbole d'alerte de securit&

Ce symbole d'alerte de securite vous signale les dangers potentiels de deces et de blessures graves &vous

et & d'autres.

Tousles messages de securite suivront le symbole d'alerte de securite et le mot "DANGER" eu

"AVERTISSEMENT'. Ces roots signifient :

Risque possible de deces ou de blessure grave si vous ne

euivez pas immediatement lee instructions.

Risque possible de deces ou de blessure grave si vous

ne euivez pas lee instructions.

Tousles messages de securite vous diront quel est le danger potentiel et vous disent comment reduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

IMPORTANTES INSTRUCTIONS DE SI CURITI

AVERTISSEMENT : Pour reduire le risque d'incendie, de

choc electrique, de blessures ou de dommages Iors de

I'utilisation de la table de cuisson, observer les pr6cautions

616mentaires suivantes, y compris ce qui suit :

• MISE EN GARDE : Ne pas remiser dans les armoires

au-dessus d'une table de cuisson, des articles que des

enfants pourraient vouloir atteindre. Les enfants pourraient

se breler ou se blesser en grimpant sur la table de cuisson.

• Installation appropriee - S'assurer que la table de cuisson

est correctement installee et reli6e & la terre par un

technicien qualifie.

• Ne jamais utiliser la table de cuisson pour rechauffer ou

chauffer la piece.

• Ne pas laisser les enfants seuls - Les enfants ne doivent

pas _tre laisses seuls ou sans surveillance dans la piece

ou la table de cuisson est en service. Ne jamais laisser les

enfants s'asseoir ou se tenir sur une partie quelconque de

la table de cuisson.

• Porter des v6tements appropries - Des v6tements amples

ou detaches ne doivent jamais _tre portes pendant

I'utilisation de la table de cuisson.

• Entretien par I'utilisateur - Ne pas reparer ou remplacer

toute piece de la table de cuisson si ce n'est pas

specifiquement recommande dans le manuel. Toute autre

operation d'entretien ou de r6paration doit _tre confiee & un

technicien qualifie.

• Remisage sur la table de cuisson - Des materiaux

inflammables ne doivent pas _tre remises pres des

elements & la surface.

• Ne pas utiliser d'eau sur un feu de graisse - I--'touffer le feu

ou la flamme ou utiliser un extincteur & produits chimiques

secs ou & mousse.

• N'utiliser que des mitaines de four seches - Des mitaines

de four mouillees ou humides sur des surfaces chaudes

peuvent provoquer des brQlures provenant de la vapeur.

Ne pas laisser les mitaines de four toucher les el6ments

chauffants. Ne pas utiliser une serviette ou autre tissu

epais.

• NE PAS TOUCHER LES FtLFtMENTS/_, LA SURFACE OU

L'ESPACE PRES DES ELEMENTS - Les 61ements de

surface peuvent _tre chauds m6me Iorsqu'ils ont une teinte

foncee. Les endroits pres des elements & la surface

peuvent devenir assez chauds pour provoquer des

brQlures. Pendant et apres I'utilisation, ne pas toucher les

61ements chauffants et ne pas laisser les v_tements ou

autres materiaux inflammables entrer en contact avec ces

elements de surface ou les endroits pres des elements,

avant qu'ils soient suffisamment refroidis. Ces endroits

comprennent la table de cuisson et les surfaces pres de la

table de la cuisson.

• Utiliser des ustensiles de format approprie - La table de

cuisson est munie d'un ou de plusieurs elements

chauffants de differentes grandeurs. Choisir les ustensiles

qui ont un fond plat assez grand pour couvrir I'el6ment

chauffant de la surface de cuisson. L'utilisation d'ustensiles

trop petits exposera une pattie de I'element chauffant, ce

qui peut provoquer I'inflammation des v6tements.

L'utilisation d'un recipient de format correct ameliore

I'efficacite de la cuisson.

• Ne jamais laisser les elements de la table de cuisson sans

surveillance alors qu'ils chauffent & la puissance maximale

- II pourrait en resulter une ebullition qui cause de la

fumee et des renversements de corps gras qui peuvent

s'enflammer.

• Ustensiles de cuisson vitrifies - Seulement certains types

d'ustensiles de verre, vitroceramique, ceramique, faYence

ou autres surfaces vitrifiees conviennent pour le service

sur une table de cuisson, sans bris attribuables aux

changements soudains de temperature.

• Les poignees des ustensiles doivent 6tre tournees vers

I'interieur et non vers le dessus des elements adjacents -

Pour reduire les risques de brQlures, d'inflammation de

produits combustibles et de renversements dus &

I'entrechoquement non intentionnel des ustensiles, la

poignee d'un ustensile dolt 6tre positionnee de sorte qu'elle

est tournee vers I'interieur et non au-dessus des el6ments

de surface adjacents.

• Ne pas faire cuire sur une table de cuisson endommagee -

Si la table de cuisson est brisee, les solutions de

nettoyage et les renversements peuvent pen6trer dans la

table brisee et creer le risque d'un choc electrique.

Contacter immediatement un technicien qualifie.

• Nettoyer la table de cuisson avec prudence - Si une

eponge ou un chiffon mouille est utilise pour essuyer les

renversements sur une surface de cuisson chaude, eviter

les brQlures causees par la vapeur chaude. Certains

nettoyants peuvent produire des emanations d6sagreables

Iorsqu'ils sont utilises sur une surface chaude.

Pour les appareils avec hotte de ventilation -

• Nettoyer les hottes de ventilation frequemment - La

graisse ne dolt pas s'accumuler sur la hotte ou le filtre.

• Lorsque vous flambez des aliments sous la hotte, mettre le

ventilateur en marche.

Pour les appareils a elements en spirale -

• S'assurer que les cuvettes de proprete sont en place -

L'absence de ces cuvettes au cours de la cuisson peut

causer des dommages aux ills ou aux composants en

dessous des el6ments.

• Garnissages protecteurs - Ne pas recouvrir les cuvettes

de papier d'aluminium sauf tel que suggere dans le

manuel. L'installation incorrecte de papier d'aluminium ou

autre materiau peut causer un risque de choc 61ectrique ou

d'incendie.

• Ne pas tremper les 61ements de chauffage amovibles -

Les elements de chauffage ne doivent jamais 6tre

immerg6s dans I'eau.

CONSERVEZ CES INSTRUCTIONS

. P.IECES ET CARA.CTERISTIQUES

MODELES A COMMANDE ELECTRONIQUE TACTILE

Modbles a commande _lectronique tactile de 30" (76,2 crn)

A B

HOT HOT

G F E D

Modbles a cornmande _lectronique tactile de 36" (91,4 crn)

A B C

,oT

HOT

A. Commande tactile arriere

gauche (mijotage, fonction

Keep Warm, fonction Melt &

Hold)

B. Commande tactile arriere droite

(mijotage, fonction Keep Warm,

fonctien Melt & Held, _l_ment

double circuit)

C. Commande tactile

d' augmentation/diminution de

la temperature

D. T_moin lumineux de surface

chaude

E.Commande tactile avant

droite (mijetage, fonction

Keep Warm, fonction Melt &

Hold)

E All/Off control lock

(verreuillage des

commandes/toutes

commandes _teintes)

G. Commande tactile avant

gauche (mijotage, fonction

Keep Warm, fonction Melt &

Hold, _l_ment a triple circuit)

A. Commande tactile arriere gauche

(mijotage, fenction Keep Warm,

fonctien Melt & Hold)

B. Commande tactile centrale arriere

(mijetage, fonction Keep Warm,

fonction Melt & Hold, "pont" de

I'_l_ment a double circuit)

C. Commande tactile arriere droite

(mijotage, fonction Keep Warm,

fonction Melt & Hold)

D. Commande tactile

d' augmentation/diminution de

la temperature

E.T#moins lumineux de surface

chaude

E Commande tactile avant droite

(mijetage, fonction Keep

Warm, fonction Melt & Hold)

G. All/Off control lock

(verrouillage des commandes/

toutes commandes _teintes)

H. Commande tactile avant

gauche (mijetage, fonction

Keep Warm, fonction Melt &

Hold, _l_ment a triple circuit)

La page charge ...

KitchenAid KECC506RWH03 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KECC506RWH03

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: KitchenAid KECC506RWH03 Owner's manual

KitchenAid KECC506RWH03 Le manuel du propriétaire

KitchenAid KECC506RWH03 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents