Samsung RF26J7510SR Manuel utilisateur

Catégorie
Réfrigérateurs-congélateurs côte à côte
Taper
Manuel utilisateur

Ce manuel convient également à

Refrigerator
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
RF26J75**
Free Standing Appliance
DA68-02601D-05.indb 1 2020. 7. 24. 오후 5:41
English - 2
Safety information
SAFETY INFORMATION
Before using your new Samsung French Door
Refrigerator, please read this manual thoroughly to
ensure that you know how to operate the features
and functions that your new appliance offers safely
and efficiently.
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory, or mental capabilities, or those who lack
experience and knowledge, unless they have been
given supervision or instruction concerning the use
of the appliance by a person responsible for their
safety.
Because the following instructions cover various
models, the characteristics of your refrigerator may
differ slightly from the refrigerator described in this
manual.
If you have any question, contact us at
1-800-SAMSUNG or find help and information
online at www.samsung.com.
Warning; Risk of
fire / flammable
materials
Important safety symbols and
precautions:
WARNING
Hazards or unsafe practices that may result in
severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in
minor personal injury or property damage.
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
Unplug the power plug from the wall
socket.
Make sure the refrigerator is grounded to
prevent electric shock.
Call the contact center for help.
Note.
These warning symbols are here to prevent
injury to you and others.
Please follow them carefully.
After reading this section, keep it in a safe
place for future reference.
WARNING
State of California Proposition
65 Warning
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
WARNING
Fill with potable water only.
Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
Do not use mechanical devices or other
Contents
SAFETY INFORMATION ……………………………………………………………… 2
SETTING UP YOUR FRENCH DOOR REFRIGERATOR …………………………9
OPERATING YOUR FRENCH DOOR REFRIGERATOR ……………………… 18
TROUBLESHOOTING ……………………………………………………………… 38
DA68-02601D-05.indb 2 2020. 7. 24. 오후 5:41
English - 3
SAFETY INFORMATION
means to accelerate the defrosting process,
other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the
food storage compartments of The appliance,
unless they are of the type recommended by
the manufacturer.
Connect to potable water supply only.
This appliance is intended to be used in
household and similar applications such as
- sta kitchen areas in shops, oces and other
working environments;
- farm houses and by clients in hotels, motels
and other residential type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
WARNING
CRITICAL INSTALLATION
WARNINGS
Do not install the refrigerator in a damp
location or place where it may come in
contact with water.
- Deteriorated insulation on electrical parts may
cause an electric shock or fire.
Do not place this refrigerator in direct sunlight
or expose it to the heat from stoves, room
heaters, or other appliances.
Do not plug several appliances into the same
multiple power strip.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matches the voltage listed
on the refrigerator’s rating plate.
- This provides the best performance and
also prevents overloading of house wiring
circuits, which could cause a fire hazard from
overheated wires.
If the wall socket is loose, do not insert the
power plug.
- There is a risk of electric shock of fire.
Do not use a power cord that has cracks or
abrasion damage along its length or at either
end.
Do not bend the power cord excessively or
place heavy objects on it.
Do not twist or tie the power cord.
Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects, or
push the power cord into the space behind the
appliance.
When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This may result in an electric shock or fire.
Never unplug your refrigerator by pulling on the
power cord.
Always grip the plug firmly and pull straight out
from the outlet.
- Damage to the cord may cause a short-circuit,
fire, and/or electric shock.
Do not use aerosols near the refrigerator.
- Using aerosols near the refrigerator may cause
an explosion or fire.
Do not install this appliance near a heater or
inflammable material.
Do not install this appliance in a humid, oily,
or dusty location, or in a location exposed to
direct sunlight or water (rain, etc.).
Do not install this appliance in a location where
gas may leak.
- This may result in an electric shock or fire.
- Keep the ventilation space in the appliance
enclosure or mounting structure clear of
obstructions.
This refrigerator must be properly
located and installed in accordance
with the instructions in this manual
before you use it.
Connect the power plug in the proper position
with the cord hanging down.
- If you connect the power plug upside down, the
wire can get cut o and cause a fire or electric
shock.
When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This constitutes a fire hazard.
Make sure that the power plug is not crushed
or damaged by the back of the refrigerator.
Keep the packing materials out of reach of
children.
- There is a risk of death from suocation if a
child puts the packing materials on his or her
head.
The appliance must be positioned so that the
plug is accessible after installation.
- Failing to do so may result in an electric shock
or fire due to electric leakage.
You need to remove all the protective plastic
film before you initially plug the product in.
DA68-02601D-05.indb 3 2020. 7. 24. 오후 5:41
English - 4
Children should be supervised to ensure that
they do not play with the fastener.
- There is a risk of death from suocation if a
child swallows the fastener.
Pay special attention to children because it can
be dangerous.
Keep the fastener out of reach of children.
The refrigerator must be safely
grounded.
- Always make sure that you have grounded the
refrigerator before attempting to investigate or
repair any part of the appliance.
Power leakages can cause severe electric
shock.
Never use gas pipes, telephone lines, or other
potential lightning attractors as an electrical
ground.
- Improper use of the grounding plug can result
in a risk of electric shock.
If it is necessary to use an extension cord, use
only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will
accept the plug on the appliance.
The marked rating of the extension cord should
be AC 115-120 V, 10 A, or more.
If a grounding adapter is used, make sure the
receptacle box is fully grounded.
Plug the power plug into the wall socket firmly.
Do not use a damaged power plug, damaged
power cord, or loose wall socket.
- This may result in an electric shock or fire.
The socket must be easily accessible so that
the appliance can be quickly disconnected
from the supply in an emergency. It must be
outside the area of the rear of the appliance.
If the power cord is damaged,
have it replaced immediately by the
manufacturer or one of its service
agents.
CAUTION
INSTALLATION CAUTIONS
Allow sucient space around the
refrigerator and install it on a flat
surface.
- If your refrigerator is not level, cooling eciency
and durability can be declined.
Allow the appliance to stand for 2 hours before
loading foods after installation and turning on.
- When installing the refrigerator, make sure both
legs contact the floor for secure installation.
Legs are located at the bottom back of freezer
door.
Insert a flathead screwdriver and turn it in the
direction of the arrow until it is level.
- Always balance the load on each door.
- Overload on any one door may fell the
refrigerator, causing physical injury.
We strongly recommend you have a qualified
technician or service company install the
refrigerator.
- Failing to do so may result in an electric shock,
fire, explosion, problems with the product, or
injury.
WARNING
CRITICAL USAGE WARNINGS
Do not insert the power plug into a wall
socket with wet hands.
Do not store articles on the top of the
appliance.
- When you open or close the door, the articles
may fall and cause personal injury and/or
material damage.
Do not insert hands, feet or metal objects (such
as knives, etc.) into the bottom or the back of
the refrigerator.
- This may result in an electric shock or injury.
- Any sharp edges may cause a personal injury
Do not put a container filled with water on the
refrigerator.
- If spilled, there is a risk of fire or electric shock.
Children should be supervised to ensure that
they do not play with the appliance.
DA68-02601D-05.indb 4 2020. 7. 24. 오후 5:41
English - 5
SAFETY INFORMATION
- Keep fingers out of “pinch point” areas.
Clearances between the doors and cabinet are
necessarily small. Be careful when you open
the doors if children are in the area.
Do not let children hang on the door.
A serious injury may occur.
Do not let children go inside the refrigerator.
They could become trapped.
Do not insert your hands into the bottom area
under the appliance.
- Any sharp edges may cause personal injury.
Do not let children step on a drawer cover.
- The drawer may break and cause them to slip.
Do not overfill the refrigerator with food.
- When you open the door, an item may fall out
and cause personal injury or material damage.
Do not touch the inside walls of the freezer or
products stored in the freezer with wet hands.
- This may cause frostbite.
Never put fingers or other objects into the water
dispenser hole, ice chute, or ice maker bucket.
- It may cause personal injury or material
damage.
Do not use or place any substances sensitive
to temperature such as inflammable sprays,
inflammable objects, dry ice, medicine, or
chemicals near or inside the refrigerator.
Do not keep volatile or inflammable objects
or substances (benzene, thinner, propane
gas, alcohol, ether, LP gas, and other such
products) in the refrigerator.
- This refrigerator is for storing food only.
- This may result in fire or explosion.
Do not store explosive substances such as
aerosol cans with a flammable propellant in this
appliance.
Do not store pharmaceutical products, scientific
materials, or temperature sensitive products in
the refrigerator.
- Products that require strict temperature
controls must not be stored in the refrigerator.
Do not place or use an electrical appliance
inside the refrigerator, unless it is of a type
recommended by the manufacturer.
Do not stand on top of the appliance or place
objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal
objects, etc.) on the appliance.
This may result in an electric shock, fire,
problems with the product, or injury.
Do not put a container filled with water on the
appliance.
- If spilled, there is a risk of fire or electric shock.
Do not use mechanical devices or any other
means to accelerate the defrosting process,
other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not spray volatile material such as
insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also
result in an electric shock, fire, or problems with
the product.
Never stare directly at the UV LED lamp for long
periods of time.
- This may result in eye strain due to the
ultraviolet rays.
Do not attempt to repair, disassemble,
or modify the appliance yourself.
Do not use any fuse (such as cooper, steel wire,
etc.) other than a standard fuse.
If your appliance needs to be repaired or
reinstalled, contact your nearest service center.
- Failing to do so may result in an electric shock,
fire, problems with the product, or injury.
If the interior or exterior LED lamp has gone
out, please contact your nearest service center.
Children should be supervised to
ensure that they do not play with the
appliance.
- Keep fingers out of “pinch point” areas. :
Clearances between the doors and cabinet are
necessarily small.
Be careful when you open the doors if children
are in the area.
Do not let children hang on the door.
A serious injury may occur.
Do not let children go inside the refrigerator.
They could become trapped.
Bottles should be stored tightly together so that
they do not fall out.
This product is intended only for the storage of
food in a domestic environment.
If a gas leak is detected, avoid any naked
flames or potential sources of ignition, and air
the room in which the appliance is standing for
several minutes.
- Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Use only the LED Lamps provided by the
manufacturer or its service agents.
DA68-02601D-05.indb 5 2020. 7. 24. 오후 5:41
English - 6
If the refrigerator emits a burning smell
or smoke, unplug the refrigerator
immediately and contact your
Samsung Electronics service center.
If you experience diculty changing a non-LED
light, contact a Samsung service center.
If the product is equipped with LED Lamps, do
not disassemble the Lamp Covers and LED
Lamps yourself.
- Please contact your service agents.
If dust or water enters the refrigerator, unplug
the refrigerator and contact your Samsung
Electronics service center.
- There is a risk of fire.
CAUTION
USAGE CAUTIONS
Do not re-freeze frozen foods that have
thawed completely.
Do not place carbonated or fizzy drinks
in the freezer compartment.
Do not put bottles or glass containers
in the freezer.
- When the contents freeze, the glass may break
and cause personal injury.
Use only the ice maker provided with the
refrigerator.
Have the refrigerator’s water supply connected
only to a potable water supply.
To operate the ice maker properly, water
pressure of 20 ~ 125 psi (138 ~ 862 kPa) is
required. If you will be away from home for a
long period of time (on vacation, for example)
and won’t be using the water or ice dispensers,
close the water valve.
- Otherwise, water leakage may occur.
If you won’t be using the refrigerator for a very
long period of time, (3 weeks or more) empty
the refrigerator including ice bucket, unplug it,
close the water valve, wipe excess moisture
from the inside walls, and leave the doors open
to prevent odors and mold.
Service Warranty and Modification.
Any changes or modifications
performed by a 3rd party on this
finished appliance are not covered
under Samsung warranty service, nor is
Samsung responsible for safety issues
that result from 3rd party modifications.
Do not block the air vents inside the refrigerator.
- If the air vents are blocked, especially with a
plastic bag, the refrigerator can be over cooled.
If this cooling period lasts too long, the water
filter may break and cause water leakage.
If the refrigerator is disconnected from the
power supply, you should wait for at least five
minutes before plugging it back in.
If you have a long vacation planned or do not
intend to use the refrigerator for a long period of
time, (3 weeks or more) empty the refrigerator
including ice bucket, pull out the power plug,
close the water valve, wipe excess moisture
from the inside walls, and leave the doors open
to prevent odors and mold.
To get the best performance from the product:
- Do not place food too close to the vents at the
rear of the appliance as it can obstruct free air
circulation in the refrigerator compartment.
- Wrap food up properly or place it in airtight
containers before putting it into the refrigerator.
- Do not place glasses, bottles, or carbonated
beverages in the freezer.
These items may freeze and break.
Broken glasses, bottles, and beverage
containers can cause injury.
- Please observe maximum storage times and
expiration dates of frozen goods.
- There is no need to disconnect the refrigerator
from the power supply if you will be away for
less than three weeks.
However, if you will be away for more than three
weeks, remove all the food and ice in the ice
bucket, unplug the refrigerator, close the water
valve, wipe excess moisture from the inside
walls, and leave the doors open to prevent
odors and mold.
- Do not fill the tank with tea or a Sports drink.
This may damage the refrigerator.
Do not strike or apply excessive force to any
glass surface.
- Broken glass may result in a personal injury
and/or property damage.
If the product is flooded, make sure to
contact your nearest service center.
- There is a risk of electric shock or fire.
Do not keep vegetable oil in your refrigerators
door bins. The oil can solidify, making it
foul-tasting and dicult to use. In addition, the
open container can leak and the leaked oil can
DA68-02601D-05.indb 6 2020. 7. 24. 오후 5:41
English - 7
SAFETY INFORMATION
cause the door bin to crack. After opening an
oil container, it is best to keep the container in
a cool and shaded place such as a cupboard
or pantry.
- Examples of vegetable oil: olive oil, corn oil,
grape-seed oil, etc.
CAUTION
CLEANING CAUTIONS
Do not spray water directly on the
inside or outside the refrigerator.
- There is a risk of fire or electric shock.
Do not use a hair dryer to dry the inside of the
refrigerator.
Do not place a lighted candle in the refrigerator
to remove bad odors.
- This may result in an electric shock or fire.
Use a clean, dry cloth to remove any
foreign matter or dust from the power
plug blades.
Do not use a wet or damp cloth when
cleaning the plug.
- Otherwise, there is a risk of fire or electric
shock.
Before cleaning or performing
maintenance, unplug the appliance
from the wall socket.
- Failing to do so may result in an electric shock
or fire.
Use a clean sponge or soft cloth and a mild
detergent in warm water to clean the
refrigerator.
Do not use abrasive or harsh cleansers such
as window sprays, scouring cleansers,
flammable fluids, muriatic acid, cleaning waxes,
concentrated detergents, bleaches, or
cleansers containing petroleum products on
exterior surfaces (doors and cabinet), plastic
parts, door and interior liners, and gaskets.
- These can scratch or damage the material.
Do not clean glass shelves or covers with warm
water when they are cold. Glass shelves and
covers may break if exposed to sudden
temperature changes or impacts such as
bumping or dropping.
WARNING
CRITICAL DISPOSAL WARNINGS
Risk of child entrapment. Before you
throw away your old refrigerator or
freezer:
- Take o the doors and door latch.
- Leave the shelves in place so that children
cannot easily climb inside.
- Children trapped inside a refrigerator can hurt
themselves or suocate to death.
Please dispose of the packaging material from
this product in an environmentally friendly
manner.
Ensure that none of the pipes on the back of
the appliance are damaged prior to disposal.
R-600a or R-134a is used as a refrigerant.
Check the compressor label on the rear of
the appliance or the rating label inside the
fridge to see which refrigerant is used for your
refrigerator.
If this product contains flammable gas
(Refrigerant R-600a), contact your local
authority in regard to safe disposal of this
product.
When disposing of this refrigerator, remove the
door/door seals and door latch so that small
children or animals cannot become trapped
inside.
Children should be supervised to ensure that
they do not play with the appliance.
If trapped inside, the child may get hurt or
suocate to death.
Cyclopentane is used in the insulation.
The
gases in the insulation material require a
special disposal procedure.
Please contact your local authorities in regard
to the environmentally safe disposal of this
product.
Keep all packaging materials well out of the
reach of children, as packaging materials can
be dangerous to children.
- If a child places a bag over his or her head, the
child could suocate.
DA68-02601D-05.indb 7 2020. 7. 24. 오후 5:41
English - 8
ADDITIONAL TIPS FOR
PROPER USAGE
In the event of a power failure, call the local
oce of your Electricity Company and ask how
long it is going to last.
- Most power failures that are corrected in an
hour or two will not aect your refrigerator
temperatures. However, you should minimize
the number of door openings while the power
is o.
- Should the power failure last more than 24
hours, remove and discard all frozen food.
The appliance might not operate consistently
(frozen contents can thaw or temperatures
can become too warm in the frozen food
compartment) when sited for an extended
period of time in a location where ambient
air temperatures are constantly below the
temperatures for which the appliance is
designed.
In case of particular foods, keeping it under
refrigeration can have a bad eect on
preservation due to its properties.
Your appliance is frost free, which means there
is no need to manually defrost your appliance.
This will be carried out automatically.
Temperature rise during defrosting complies
with ISO requirements.
But If you want to prevent an undue rise in the
temperature of frozen food while the appliance
defrosts, wrap the frozen food in several layers
of newspaper.
Do not re-freeze frozen foods that have thawed
completely.
Saving Energy Tips
- Install the appliance in a cool, dry room with
adequate ventilation.
Ensure that it is not exposed to direct sunlight
and never put it near a direct source of heat (a
radiator, for example).
- Not to block any vents and grilles is
recommended for energy eciency.
- Allow warm food to cool down before placing it
in the appliance.
- Put frozen food in the refrigerator to thaw.
You can then use the low temperatures of the
frozen products to cool food in the refrigerator.
- Do not keep the door of the appliance open for
too long when putting food in or taking food
out.
The shorter the time the door is open, the less
frost build-up you’ll have in the freezer.
- It is recommended to install the refrigerator with
clearance to the back and sides.
This will help reduce power consumption and
keep your energy bills lower.
DA68-02601D-05.indb 8 2020. 7. 24. 오후 5:41
English - 9
SETTING UP
Setting up your French Door
Refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
eciencies that this new appliance oers.
Selecting the best location for the
refrigerator
Choose:
A location with easy access to a water supply.
A location without direct exposure to sunlight.
A location with level (or nearly level) flooring.
A location with enough space for the
refrigerator doors to open easily.
A location that allows sucient space to the
right, left, back, and top for air circulation.
If the refrigerator does not have enough space,
it can cause the bad influence to refrigeration
eciency and power consumption.
A location that allows you to move the
refrigerator easily if it needs maintenance or
service.
Do not install the refrigerator in locations where
the temperature is over 110 °F (43 °C) or below
50 °F (10 °C ).
AA
B
B
C
C
D
D
E
E
Model RF26J*
Depth “A 34” (863 mm)
Width “B” 32 3/4” (830 mm)
Height “C” 68 7/8” (1749 mm)
Overall Height “D” 70” (1777 mm)
Depth “E” 36 1/2” (925 mm)
11 6/8"
125° 125°
2"
29 5/8"
Each measurement based on the design
dimension, so it may dier depending on
the measuring method.
DA68-02601D-05.indb 9 2020. 7. 24. 오후 5:41
English - 10
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to “Leveling the Refrigerator” on page 14.
Flat-blade screw
driver (-)
Control Lever
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
REQUIRED TOOLS
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Socket wrench
(13/32”) (10 mm)
Allen wrench
(3/16”) (5 mm)
DA68-02601D-05.indb 10 2020. 7. 24. 오후 5:41
English - 11
SETTING UP
REMOVING THE REFRIGERATOR
DOORS
For some installations, you need to remove the
fridge and freezer drawers so you can move the
refrigerator to its final location.
Do not remove the doors/drawer if you don’t need
to. If you do not need to remove the refrigerator
doors, go to “Leveling the Refrigerator” on page
14.
If you need to remove the doors. continue below.
Before removing the door/drawer, make sure you
read the following items:
WARNING
Disconnect power to the refrigerator before
removing the door or drawer.
Be careful not to drop, damage or
scratch the door / drawer while removing
them.
Be careful not to injure yourself while removing
the doors / drawer.
Reattach the door/drawer properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
WARNING
Disassembling the refrigerator doors
Be careful not to drop and scratch the doors while
removing them.
With the door opened
1. Remove 3 screws holding down the TOP
TABLE ( 1 ) and separate the connected wires.
(1)
2. Disconnect two connectors ( 2 ) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
Remove the water line ( 3 ) while pressing the
marked part ( 4 ) of the water line coupler.
(2)
(3)
(4)
Red Clip
(1/4”)
CAUTION
If a red clip is on the coupler, you must remove it
before removing the tube.
CAUTION
Keep the clips out of the reach of children and
make sure that children do not play with them or
put them into their mouths.
DA68-02601D-05.indb 11 2020. 7. 24. 오후 5:41
English - 12
3. Pull and remove the hinge lever ( 5 ).
Remove
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 7 ).
(5)
(7)
(6)
4. Lift the door straight up to remove.
5. Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts ( 9 ) attached to
the lower left and right door hinges with an allen
wrench (3/16”).
Remove the lower left and right door hinges
( 10 ).
(10)
(8)
(9)
Allen wrench
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts in
reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
2. Insert the clip in the install pack, and then
confirm that it holds the line firmly.
Type A Type B
Center of Transparent
coupler
The Guide Lines
Dispenser
clip A (1/4”)
(6.35 mm)
clip A (1/4”)
(6.35 mm)
DISASSEMBLE THE FREEZER
DRAWER
1. Take out the upper drawer by lifting it up.
2. Take out the lower basket ( 2 ) by lifting the
basket up from the rail system.
(2)
DA68-02601D-05.indb 12 2020. 7. 24. 오후 5:41
English - 13
SETTING UP
CAUTION
You can scratch the side of the bin if you twist it
left or right when disassembling or re-assembling
it.
3. Press the fixing hook of the rail system.
4. Holding the top of the Freezer Drawer, pull it
out all the way, and then remove it from the rail
system.
CAUTION
Be careful not to scratch or dent the sliding rail by
letting it strike the floor.
CAUTION
Make sure that you mount the freezer basket in the
right position when removing / installing the freezer
door. Failing to do so may result in the door not
opening or closing properly.
CAUTION
Putting too much food into the freezer drawers can
prevent the freezer from closing completely and
can cause frost build-up.
RE-ASSEMBLE THE FREEZER
DRAWER
To reattach the drawer after you have moved the
fridge to its fi nal location, assemble the parts in
reverse order.
DA68-02601D-05.indb 13 2020. 7. 24. 오후 5:41
English - 14
LEVELING THE REFRIGERATOR
Make sure the refrigerator is level so that you can
make final adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
If the refrigerator is not level, you will not be able
to get the doors perfectly even, which may cause
moisture condensation and increased energy bills.
Below is an example of how to level the refrigerator
if the left side of the refrigerator is lower than the
right side.
How to adjust the level
1. Open the freezer drawer and remove the lower
basket.
2. Insert a flat-blade screwdriver (-) into a notch on
the left control lever, and then turn it counter-
clockwise to level the refrigerator.
(You turn the lever clockwise to lower the
refrigerator and counterclockwise to raise it.)
flat-blade
screwdriver (-)
Control Lever
CAUTION
Both control levers must be touching the floor to
avoid possible personal injury or property damage
because of tipping.
CAUTION
The refrigerator on an uneven floor may tilt.
To prevent this, adjust the leg so that it contacts
the floor.
If the right side is lower, perform the same
procedure, but with the right control lever.
MAKING MINOR ADJUSTMENTS
BETWEEN DOORS
Remember, a leveled refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
leveling the refrigerator.
Fixed part
Adjustment part
The left door is fixed.
To make minor adjustments between
doors, adjust only the right door.
1. Pull out the freezer drawer ( 1 ),then you can
see the lower hinge ( 2 ).
2. Insert a philips screwdriver (+) ( 3 ) into the shaft
( 4 ) of the lower hinge.
3. Adjust the height by turning a philips
screwdriver (+) ( 3 ) clockwise (
DOWN
) or
counterclockwise (
UP
).
( 1 )
( 2 )
( 3 )
( 4 )
( 3 )
When you turn a philips screwdriver (+)
counterclockwise (
UP
), the door will
move up.
DA68-02601D-05.indb 14 2020. 7. 24. 오후 5:41
English - 15
SETTING UP
INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a filter is one of the helpful
features on your new refrigerator.
To help promote better health, the water filter
removes unwanted particles from your water.
However, it does not sterilize the water or destroy
microorganisms. You may need to purchase a
water purifying system to do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water
pressure of 20 ~ 125 psi (138 ~ 862 kPa) is
required.
If the refrigerator is installed in an area with low
water pressure (below 20 psi), you can install
a
booster pump to compensate for the low pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator
is properly filled.
To do this, press the water dispenser lever until the
water runs from the water outlet.
New hose-sets supplied with the appliance are
to be used and that old hose-sets should not be
reused.
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and a ¼” compression nut.
Connecting to the water supply line
1. First, shut o the main water
supply.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut o valve.
Cold water line
Pipe clamp
Shut o valve
3. Connect the water line installation kit to the
shut o valve.
Shut o valve
Pipe clamp
Cold water line
Water line installation kit
DA68-02601D-05.indb 15 2020. 7. 24. 오후 5:41
English - 16
Connecting the water supply line to the
refrigerator
There are several items that you need to purchase
to complete this connection.
You may find these items sold as a kit at your local
hardware store.
Use Copper Tubing Use Plastic Tubing
¼” copper tubing
¼” compression nut
(1pc)
Ferrule (2pc)
¼” plastic tubing
Molded end (Bulb)
¼” compression nut
(1pc)
Compression Nut
(1/4”) (Assembled)
Ferrule
(Not supplied)
Plastic Tubing
(Assembled)
Compression
Fitting (Assembled)
Molded end
(Bulb)
Compression
nut (B) (1/4”)
(Not supplied)
or
Copper tubing
(Not supplied)
Plastic tubing (B)
(Not supplied)
Household water supply line
Refrigerator
1. Connect the household water line to the
assembled compression fitting.
- If you are using copper tubing, slip the
compression nut ( B ) (not supplied) and
ferrule (not supplied) on the copper tubing (not
supplied) as shown.
- If you are using plastic tubing ( B ), insert the
molded end (Bulb) of the plastic tubing ( B ) into
the compression fitting.
CAUTION
Do not use without the molded end (Bulb) of the
plastic tubing ( B ).
2. Tighten the compression nut ( B ) onto the
compression fitting.
Do not over-tighten the compression nut ( B ) .
3. Turn the water on and check for any leakage.
If you find water drops or leakage in the
connection areas, turn o the main water
supply. Check the connections and, if
necessary, tighten.
4. Flush 1 gallon of water through the filter before
drinking or using the water from the refrigerator.
(Flush approximately 6 minutes.)
To flush, press a large glass or cup against the
water dispenser lever.
Fill the glass, empty it into the kitchen sink after
it is filled, and then repeat.
5. After you turn on the refrigerator, let the ice
maker make ice for 1 to 2 days.
Over that period of time, throw out the first 1 or
2 buckets of ice the freezer makes to ensure all
impurities have been removed from the water
line.
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut o 1/4“ of the plastic tubing
to make sure you get a snug, leak-free
connection.
You can test the water line quickly using a
paper cup. Under normal conditions, the
water dispenser can fill a 5.75 oz. (170 cc)
cup in about 10 seconds.
DA68-02601D-05.indb 16 2020. 7. 24. 오후 5:41
English - 17
SETTING UP
COMPLETING THE SET UP
Now that you have your new refrigerator installed
in place, you are ready to set up and enjoy the
features and functions of the appliance.
By completing the following steps, your refrigerator
should be fully operational.
1. Make sure your refrigerator is in an appropriate
location with reasonable clearance between it
and the wall. Refer to installation instructions in
this manual.
2. Once the refrigerator is plugged in, make sure
the interior light comes on when you open the
doors.
3. Set the Temperature control to the coldest
temperature and wait for an hour.
The freezer will get slightly chilled and the motor
will run smoothly.
Reset the refrigerator and freezer to the
temperatures you want.
4. After you plug the refrigerator in, it will
take a few hours to reach the appropriate
temperature.
You can store food and drinks in the refrigerator
after the temperature is suciently cool.
If condensation or water drops appear
on both sides of the fridge door’s central
part, turn the Energy Saver mode o after
removing the condensation.
(See the explanation of the Energy Saver
button in “Using the control panel” on
page 19.)
DA68-02601D-05.indb 17 2020. 7. 24. 오후 5:41
English - 18
Operating your French Door
Refrigerator
USING THE CONTROL PANEL
RF26J*
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
( 1 ) Freezer / Power Freeze (3 sec)
The Freezer button serves two purposes:
- To set the Freezer to your desired
temperature.
- To turn the Power Freeze function on and o.
1. To set the Freezer temperature, touch the
Freezer button.
You can set the temperature between 5 °F
(-15 °C) and -8 °F (-23 °C).
2. Power Freeze function
Touch and hold this button for 3 seconds to
decrease the time needed to freeze products in
the Freezer.
It can be helpful if you need to quickly freeze
easily spoiled items or if the temperature in the
freezer has warmed dramatically.
(For example, if the door was left open.)
When you use this function, the energy
consumption of the refrigerator will increase.
Remember to turn it o when you don’t
need it and return the freezer to your original
temperature setting.
If you need to freeze a large amount of food,
activate the Power Freeze function at least 24
hours before you put the food into the freezer.
( 2 ) Alarm / Filter Reset (3sec)
The Alarm button serves two purposes:
- To turn the door open alarm on and o
- To reset the water filter life indicator.
1. Door Alarm Function
If the door alarm is set to On, an alarm beeps if
any refrigerator door is left open for more than
three minutes.
The beeping stops when you close the door.
The door alarm function is pre-set to On in the
factory.
You can turn it o by pressing and then releasing
the Alarm button.
You can turn it back on in the same fashion.
The icon lights up when the function is on.
When the Door Alarm function is on and the
alarm sound is triggered, the Door Alarm Icon
will blink while the alarm sounds.
2. Water Filter Life Indicator Function
After you replace the water filter, touch and hold
t
his button for 3 seconds to reset the water filter
life indicator.
When you reset the water filter life indicator, the
Filter icon on the panel turns O.
The Filter icon will turn red to let you know it is
time to change the water filter after six months
(about 300 gallons).
Some areas have large amounts of lime in their
water, which causes the water filter to clog more
quickly.
If this is the case in your area, you will have to
change the filter more frequently than every six
months.
( 3 ) Energy Saver
Touching this button turns Energy Saver mode
on and o.
When you turn Energy Saver on, the Energy
Saver icon lights.
Turn Energy Saver o and the icon goes o.
The Energy Saver function automatically turns on
when power is supplied to the refrigerator.
If condensation or water drops appear on the
doors, turn the Energy Saver mode o.
DA68-02601D-05.indb 18 2020. 7. 24. 오후 5:41
English - 19
OPERATING
( 4 ) Fridge / Power Cool (3 sec)
The Fridge button serves two purposes:
- To set the Fridge to your desired temperature.
- To turn the Power Cool function on and o.
1. To set the Fridge temperature, press the
Fridge button.
You can set the temperature between 44 °F
(7 °C) and 34 °F (1 °C).
2. Power Cool function
Touch and hold this button for 3 seconds to
decrease the time needed to cool products in
the Refrigerator.
It can be helpful if you need to quickly cool
easily spoiled items or if the temperature in the
fridge has warmed dramatically.
(for example, if the door was left open)
( 5 )
Lighting / °C°F (3sec)
The Lighting button serves two purposes:
- To turn the dispenser light on and o
- To switch the temperature units between ºC
and ºF.
1. Light Function
Touching the Lighting button turns on the
Dispenser LED lamp in continuous mode so that
it stays on continuously.
The button also lights up.
If you want the Dispenser lamp to come on only
when some one uses the dispenser, press the
Lighting button to turn the continuous mode o.
2. To switch the temperature units between ºC
and ºF.
Touch and hold this button for 3 seconds to
select the temperature display you want.
Each time you press and hold the button, the ºC
and ºF temperature modes alternate and the ºC
or ºF icon lights up, indicating your selection.
( 6 )
Ice Maker O
If you don’t want to make more ice, touch the
Ice Maker O button.
The icon will light up and the Ice-Maker stops
making ice.
We recommend you to stop ice making if the
following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water
Line is not connected, there will be a water valve
noise from the back of the unit. Press the Ice
Maker O (Control Lock (3sec)) button for less
than 3 seconds until the Ice O Indicator
( )
illuminates.
( 7 ) Water
Touch this button to dispense water.
This mode can not be used with the Ice Type
mode simultaneously.
Water mode shuts o when you touch the
Cubed / Crushed Ice button.
To save electricity, the Panel Display turns o
automatically under the following conditions:
When no button has been pressed, when no
doors are open, or when no Dispenser Lever
has been pushed.
However, the icon indicating your cubed or
crushed ice selection, will stay on.
When you press a button, open a door, or push
a Dispenser Lever, the Panel Display will turn
on again.
Except for the Energy Saver, Water, and Cubed
/ Crushed Ice buttons, all function buttons
will become operational after you remove
your finger from the button you are currently
pressing.
DA68-02601D-05.indb 19 2020. 7. 24. 오후 5:41
English - 20
( 8 ) Filter
Water filter usage
This icon lights up when you need to change
the filter, usually after the refrigerator has
dispensed about 300 gallons of water (after
about 6 months). After you install the new water
filter, reset the filter indicator by touching and
holding the Hold 3sec for Filter Reset button for
3 seconds.
The icon will blink red for several seconds when
you open or close the door.
- If water is not dispensing or dispensing
slowly, you need to replace the water filter
because the water filter is clogged.
- Some areas have large amounts of lime in
their water, which causes the water filter to
clog more quickly.
( 9 ) Ice Type
Touch this button to select your desired ice type.
Cubed and crushed ice modes alternate when
you press the button.
This mode can not be used with the Water mode
simultaneously.
( 10 ) Ice Maker O / Control Lock (3sec)
The Ice Maker O button serves two purposes:
- To turn the Ice maker on and o
- To turn the Control Lock Function on and o.
1. Ice O Function
If you don’t want to make more ice, press the Ice
Maker O button.
2. Control Lock Function
Touch and hold this button for 3 seconds to lock
the display and the dispenser buttons so the
buttons can not be used.
When Control Lock is on, the refrigerator does
not dispense ice or water, even if the Dispenser
Lever is pressed.
The Control Lock icon lights up to indicate
you’ve activated the Control Lock function.
Press 3 seconds to unlock.
Cooling O Mode
Cooling O mode (also called Shop mode),
is designed for use by retailers when they are
displaying refrigerators on the shop floor.
In Cooling O mode, the refrigerator’s fan motor
and lights work normally, but the compressors
do not run, and the refrigerator and freezer do
not get cold.
To start Cooling O mode, touch and hold the
Freezer, Alarm and Fridge buttons for 5 seconds
during normal operation.
The refrigerator chime sounds and the
temperature display flashes OFF.
To cancel Cooling O mode, touch and hold
the Freezer, Alarm and Fridge buttons again for
5 seconds.
DA68-02601D-05.indb 20 2020. 7. 24. 오후 5:41
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

Samsung RF26J7510SR Manuel utilisateur

Catégorie
Réfrigérateurs-congélateurs côte à côte
Taper
Manuel utilisateur
Ce manuel convient également à