ZENDURE ZDSATP16 Satellite Plug Manuel utilisateur

Marque: ZENDURE

Modèle: ZDSATP16 Satellite Plug

Taper: Manuel utilisateur

Title Page

1.LOGO：



2. Heading：SatellitePlugUserManual

3. Model：ZDSATP16

InnerPage

1.SPECIFICATIONS

Name:SatellitePlug

Model:ZDSATP16

ElectricalRating:100‐250VAC,50Hz

LoadCurrent:16AMax

WirelessType:Wifi2.4GHz&Bluetooth

APPSupport:IOS&Android

2.ProductOverview



3.ControlWithAPP

1)AddNewDevice

Tips:Requirements:2.4GhzWi‐Fiathome

.Ifyouonlyhave5GhzWi‐Firouter,youwillnotbeabletocompleteconnection.

.IfyouareusingadualWi‐Firouter,anditbroadcast2Wi‐Fisignals,makesurethatyour

phonewasconnectedwiththe2.4GhzWi‐Fisignal.

.IfyouareusingadualWi‐Firouterbutitbroadcastonly1Wi‐Fisignal,youwillhaveto

manageyourWi‐Firouterandchangethesettingtohave2.4GhzWi‐Fi.

2)Method1:BluetoothtoAddDevice

3)Method1:APtoAddDevice

4)howtosharethesmartplug?

Poweron/off,Reset

1. ShortPressthebuttonto

turnon/off

2. Pressandholdfor5sto

restorefactorystting

PowerJack

Wireless/Powerindicate

1. PowerOn:theredlighton

2. StartWIFIConnecting:the

bluelightflashing

3.WIFIConnected:thebluelight

isalwayson

5)VoiceSkill

1)Factiondescriberation

2)howtoconnectwithamazonalexa?

3)howtoconnectwithGoogleHome?

4.FCCStatement

RFExposureInformation

5.WARNING

.Pluginfullytothewalloutletwhileusing.Donotinsertaconductororothertoolstothe

sockethole.

.Ifthereisradiofrequencyinterference,itmightaffecttheoperation.

Indooruseonly.

.Donotuseinbathroomandotherdamplocations.

.Pleaseensurethesecurityoftheelectricity,resistiveloadcurrent16AMax.

.Pleasekeepthedeviceoutofthereachofchildrentoavoiddanger.

6.Warranty

Theproductcarriesaone‐yearwarrantyfrompurchasedate.Pleasefeelfreetocontactus

whenyouhaveanyproductproblemorsuggestions.

CustomerServiceEmail:



This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions:

Any Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm

etween the radiator & your body.

(1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause

undesired operation.

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm

etween the radiator & your body.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic

Development Canada’s license-exempt RSS(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux

CNR d’Innovation, Scienceset Développement économique Canada applicables aux appareils

radio exempts de licence. L’exploitation est autoriséeaux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettrele fonctionnement.

RF Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for uncontrolled

environments. This equipment should be installed and operated with a minimum distance of

20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada

pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une

distance minimum de 20 cm entre l’antenne et votre corps.

Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou

un autre émetteur.

ZENDURE ZDSATP16 Satellite Plug Manuel utilisateur

Marque: ZENDURE

Modèle: ZDSATP16 Satellite Plug

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: ZENDURE ZDSATP16 Satellite Plug User manual