Yealink A20 MeetingBar Kit Mode d'emploi

Taper
Mode d'emploi
Yealink MeetingBar A20 Kit
English | 󳚂󰪌󰥦󲂟| Deutsch | Français | Español
Quick Start Guide (V1.0)
Microsoft
Teams
Certied for
Microsoft
Teams
Certied for
Table of Contents
English..............................................................1
󳚂󰪌󰥦󲂟 ...................................................................... 9
Deutsch.............................................................17
Français...........................................................25
Español...........................................................33
1
Package Contents
MeetingBar A20
VCR11 AAA Battery×2
3 m Ethernet Cable 1.8 m HDMI Cable×2
(for the display device)
Cable Tie×5 Power Adapter
×4
×2
×2
Mounting Bracket and
Accessories Silicone Pad×2 Quick Start Guide
CTP18 7.5 m Ethernet Cable Mounting Bracket Screwdriver
and Accessories
Remote Control Package Touch Panel Package
(Standard accessory on Zoom edition)
Standard accessories
Optional accessories
2
2
2
Cable Lock Box PoE Adapter
PSE Ethernet Cable
(3 m CAT5E FTP cable) Power Cord
EN
Cable lock box 3M Velcro
TV-Clip Mount
(for installing)
VCH51 Interface 7.5 m
Protective Cover Ethernet Cable
VCH51 Sharing Kit
WPP20 Type-C Adapter
Wireless Presentation Pod-WPP20
0.6 m 0.6 m
HDMI Cable USB Type-C Cable
WPP30
Wireless Presentation Pod-WPP30
2
睞睞睥NN
34
5
Endpoint embedded installation
is prohibited (For example: inside
the wall, enclosed space).
Endpoint Installation
Mount on a Wall
Step1: Determine A20 position
TV
10 cm
TV
H120 cm
H<120 cm
Step2: Assemble the mounting bracket
Hole depth: 6 mm
T4×30 screws
Step3: Mount the A20 to the wall
Use the bracket to mount your endpoint on a wall.
Hole diameter: 30 mm
The mounting height affects your camera view. The recommended
height is 1.1 m above the ground.
Unboxing Video
󵭂Teams󵭃
Unboxing Video
󵭂Zoom󵭃
3
睞睞睥NN
34
5
Pay attention to the
direction of M-2
Using TV-Clip Mount
57
Velcro A is posted on the
inside of M-2 by default
4
TV
TV TV
Put on a desk
Put on a TV stand cart platform
15°
15°
Adjusting the Camera Tilt
Silicone Pad
5
12
2
1
CTP18 Connection
3 m Ethernet Cable 7.5 m Ethernet Cable
Endpoint Connection
Display
(Not included)
Power Adapter
1.8 m HDMI Cable 3 m Ethernet Cable
PoE
If you only need to use one display, please connect to HDMI 1 port.
Make sure that CTP18 and the
MeetingBar A20 are in the same
LAN.
MeetingBar A20 (Endpoint)
The functions of the
VC Hub/Phone port
and the Internet
port are different,
pay attention to the
connection method.
CTP18
6
Pair with the CTP18 (Optional)
For a better pairing experience, we recommend starting the A20 endpoint rst and then the CTP18.
If you purchased a combination kit, MeetingBar A20 and CTP18 would be paired automatically. You
can go to step 2 directly.
Find a networked computer and operate it
according to the interface prompts of CTP18 and
MeetingBar A20.
1. Pair manually: On the CTP18, enter the IP address of the MeetingBar A20 on display.
2. Initialize language, time zone, and auto update, and select the desired platform. If you
select Device Mode, refer to the Device Mode section.
3. Account login (Contact the corresponding service provider to obtain an account)
MeetingBar A20
CTP18
Zoom: Follow the prompts on CTP18 to sign in account.
Method 1: Sign in on the website Method 2: Sign in on the device
Use the remote control to operate it if your display
does not support touching.
Teams:
Sign in the same Microsoft Teams account on both CTP18 and MeetingBar A20.
Select the desired endpoint on the CTP18.
Enter the pairing code displayed on the endpoint on CTP18 and complete pairing.
CTP18 Pairing Video
(Teams)
CTP18 Pairing Video
(Zoom)
7
Wireless Content Sharing/Wireless Device-USB Mode
Wireless Content Sharing
1. Connect the WPP20/WPP30 to the USB-A port of the
MeetingBar A20. Waiting for 3 seconds, MeetingBar A20
prompts “Wireless presentation pod pairing successfully”.
2. Connect the WPP20/WPP30 to the PC and press the
Presentation button to share the screen. Wireless Presentation
Pod
WPP20/WPP30 cannot be used when the endpoint uses a wireless network.
PC
Wireless Device-USB Mode
1. Connect the WPP30 to the USB-A port of the Meeting-
Bar A20. Waiting for 3 seconds, MeetingBar A20 prompts
“Wireless presentation pod pairing successfully”.
2. Connect the WPP20/WPP30 to the PC.
3. On the Yealink Wireless Presentation Pod software, click
BYOD Mode > Press to Share.
Presentation button
Wireless Content
Sharing Video
(Teams)
Wireless Device
USB Mode Video
(Teams)
Wired Content
Sharing Video
(Teams)
Wired Content
Sharing Video
(Zoom)
Wireless Device
USB Mode Video
(Zoom)
Wireless Content
Sharing Video
(Zoom)
Wired Content Sharing/Wired Device-USB Mode
Wired Content Sharing
2
1
Ethernet Cable
USB-C Cable with Adapter
PC
USB-C
HDMI
HDMI Cable
Connect VCH51 and MeetingBar A20 with an Ethernet Cable, and connect VCH51 and PC
with a USB-C Cable or HDMI Cable.
• Share screen after the HDMI cable is connected.
The CTP18 paired with the MeetingBar A20 will prompt whether to enter the BYOD mode,
and click Cancel to share screen after the USB-C Cable is connected.
OR
HDMI
VC Hub/
Phone
PoE
VCH51
USB-C
Device Mode
Device Mode
Video
1. Do one of the following to select Device Mode:
When selecting a platform during power-on initialization, select Device Mode.
• Switch platforms after logging in:
Teams: Go to More > Settings > Device Settings > UC Provider, enter the admin password
(0000), and select Device Mode.
Zoom: Go to Settings > General > System Settings > UC Provider, enter the admin password
(0000), and select Device Mode.
2. Refer to steps 1 and 2 of Wireless Device-USB Mode or Wired Device-USB Mode to enter
Device Mode.
8
Power Key*
Record Video Key*
Layout Key: Adjust the layout during the meeting*
Custom Key: Switch to device mode*
Volume Key: Zoom In/Out: OK Key: Navigation Key:
Mute Key
Home Key: Go back to the home screen during non-calling. Open the menu bar during the call.*
Return Key
Dial Key
Delete Key
Hang up Key
Character Keys
For other functions and accessories, please refer to the Help Center.
If there are any problems during the deployment, you can submit a ticket at
https://ticket.yealink.com/, and we will have corresponding engineers to deal with
it.
Teams Remote Control (Optional)
* Coming Soon
The keys in different modes
are different, please refer to the
actual circumstances.
Wired Device-USB Mode
1. Connect VCH51 and MeetingBar A20 with an Ethernet Cable.
2. Do one of the following to connect PC and VCH51:
A Connect VCH51 and the USB-C port of MeetingBar A20 with a USB-C Cable.
B Use a USB-C Cable (with USB-A adapter) to connect the VCH51 and the USB-A
port of the computer, and use an HDMI Cable to connect the VCH51 and PC.
3. Enter Device-USB Mode:
The CTP18 paired with the MeetingBar A20 will prompt whether to enter the BYOD
mode. Click OK to enter Device-USB Mode.
• If you don't have a CTP18, use the remote control and go to More > Settings >
Device Settings > Advanced Feature > Device-USB Mode.
Help Center (Teams)
2
1
USB-A PC
USB-C
HDMI
HDMI Cable
HDMI
VC Hub/
Phone
PoE
VCH51
USB-C
USB-A
A
B
OR
USB-C
Ethernet Cable
Wired Device
USB Mode Video
(Teams)
Wired Device
USB Mode Video
(Zoom)
Upgrade the Firmware
You need to upgrade the rmware of MeetingBar A20 and CTP18 separately.
1. (Teams) Go to More > Settings > Device Settings > About to obtain the IP address.
(Zoom) Go to Settings > System Setting > About to obtain the IP address.
2. Open a web browser and enter the device's IP address in the address bar. For example, http(s)://10.82.24.11/, and
press Enter.
3. Enter the administrator username and the password, and click Login. (The default user name is "admin", the
password is "0000").
4. Go to Settings > Upgrade.
5. On the right side of Upgrade Firmware, click Browser to upload the desired rmware.
6. Click Upgrade.
Please get the latest rmware at https://support.yealink.com/.
Help Center (Zoom)
9
包装清单
×4
×2
×2
󵹠󵹞 󵹡 󳝳󳩑󳦿 󵹟󵹦 󳝳 󳦿 󵹠
󵭂󳀮󰧇󱺾󲅖󳐽󴚳󱐫󵭃
󲉴󳦿󱥆 󵹣 󳀻󲦞󴫴󴰿󵫫 󲁈󲋋󴰿󰨯
󵭂󳀮󰧇󱚬󴎷󰥴󲉏󵭃 󳍉󳯴󱋔 󵹠 󱬈󴬑󰲞󵃙󱸠󰺉
• 标准配件
• 可选配件
󵹟󵹦󵹥󵹣 󳝳󳩑󳦿󱸛󱎿󲋋󴰿󰨯󴊮󰥖󰴶
󵹣󵹟󱺾󰼒󰬖󱷁󳩪󵹥󵹣 󳝳󳩑󳦿
󴭗󱻀󵫫 󴓛󱻀󱦑󲊔
󲈟󳦿󱶲󱝲󳇘󱙳
2
2
2
USB 󴿳󳦿󳇘󳀻󲦞
󵹞󵹤 󳝳  󳦿󵹞󵹤 󳝳  󳦿
.潞㬲愼
64#椋勃䫖 䤹䊔勃
偷单勃
('51憍⊗偿⋨ⴭ单勃)
PSE
󲙶󰥳  󳦧󰧠󰿰󱉑󳀥󲡍󲺷󱎩󰥦󵭆󴛚󰧠󰿰󰼞󳯻󰩓󴬒󱴭󲃸󳦿󳀻󱦐󱶍󱉑󴫋󳓐󱯢󰳬󰥄󵭆󰼞󳯻󵇰󴑵󳀮󱵔󱜜󱦐󱶍󴲹
󰼆󰴼󱛁󰼞󴌾󳆊󱻃󲃕
WPP30
󲃸󳦿󰩙󱝲󰷞󱵨 
CN
VCR11 󴭗󱻀󵫫 7 󰼦󳀻󲝳 ×2
󳀻󴒺󱸛󲋋󴰿󰨯
󵭂󱜩󰥴󲉏󱚬󴎷󱉑󳀻󴒺󰥃󵭃
󵹠󵹞󱺾󰼒
󲃸󳦿󰩙󱝲󰷞󱵨 
10
睞睞睥NN
34
5
󳧈󳗱󰥆󲁈󱸚󱡭󰲞󱨭󱚬󴎷󵭂󰫄
󱒥󵹛󱎿󱏦󰲽󱜤󵃞󳕼󵃥󵭃
安装终端
•墙装
步骤 1:确定 MeetingBarA20 的位置
TV
10 cm
TV
H120 cm
H<120 cm
步骤 2:安装支架
󱵰󱙷󳇺󱪢󵹛󵹤
󴊮󰥖󴒸󲍑󵹛󵹢󵹡󵹞
步骤 3:墙装
󰪸󳀮󲁈󲋋󱜩󳧈󳗱󱚬󴎷󱉑󱎿󰥃
󱵰󱙷󲤂󱧄󵹛󵹡󵹞
󱚬󴎷󵗅󱧄󰩓󱪏󰿼󱽝󰰇󲉏󳆊󴒺󴳀󵭆󱨘󴚣󳧈󳗱󱚬󴎷󳆊󵗅󱧄󰥳󳒾󱉙󵉑 󳝳
󱨞󳚳󴒺󵍽
󵭂󵭃 󱨞󳚳󴒺󵍽
󵭂󵭃
11
睞睞睥NN
34
5
󲟺󱰬  󲁈󲋋󳆊󲃑󰽀
•使用电视挂架 TV-ClipMount
57
󵙁󲉄󴠦  󵦿󴚙󳞘󴠦󱉑  󰲽󰫠
12
TV
TV TV
•置于桌面
•置于电视推车
15°
15°
调整倾斜角度
󳍉󳯴󱋔
13
连接终端
12
2
1
󲅖󳐽󴚳󱐫
󵭂󳳧󱐫󵭃
󳀻󲦞󴫴󴰿󵫫
󵹡 󳝳󳩑󳦿
连接 CTP18 󵭂可选󵭃
Reset
MAC
SN
󵹡 󳝳󳩑󳦿 󵹥󵹣 󳝳󳩑󳦿
PoE
󱒥󲊱󰪙󰼙󵇰󴫐󱺾󰤹󰥣󲅖󳐽󵫫󵭆󴛬󴫐󱺾󳳰 󵹟󰼒
󵹟󵹦 󰥇 󵹠󵹞 󵇰󱉑󰼻
󰤹󱝣󱌇󳩑󰲽
 󰼒󰥇
 󰼒 󰷔 󳯻 󰥆
󰼻󵭆󴛬󲟺󱰬󴫐󳦿󲃑󱨭
CTP18
 󳦿
󵹠󵹞󵭂󳧈󳗱󵭃
14
找一台联网的计算机,根据 CTP18 MeetingBar A20 的界
面提示进行操作。
与 CTP18 配对(可选)
󰥳󳺴󱪵󲈋󱒠󳆊󴰿󱜜󰪌󵕸󵭆󱴮󰨥󱨘󴚣󰲁󰽞󰷝󳧈󳗱󵭆󲱀󰼽󰳅󰽞󰷝
󱒥󲊱󰪙󴠟󰦩󳆊󲅇󳧄󰼷󰸸󵭆 󰥇  󱜩󳳧󰷝󴰿󱜜󵭆󴛬󴣣󴪹󲙷󵖐 
󱵨󰷝󴰿󱜜󵹛󱉑  󰥃󴪃󰲞󲅖󳐽󵫫󰥃  󳆊  󱉙󱉩
󰵒󱓮󰹉󴰿󳩯󴛢󴓵󲄎󰹭󰾻󳳧󰷝󲈋󲃈󵭆󱦔󰥍󴫻󱸂󱵝󵇰󱦑󰼟󳷢󴫻󱸂  󱐺󴚳󲔵󱨭󵭆󴛬󴣣󴩜󳳰
USB 外设模式󳗢󳵿
󳆁󱩳󴠘󰼦󵭂󴛬󳭔󳟻󱜜󱦲󳆊󲈣󰷖󱻩󰫔󱁴󳺴󰼆󴠘󰼦󵭃
󵹠󵹞
󵹟󵹦
 󲍎󱺇  󰥃󳆊󱻩󳐽󳆁󱩳󴠘󰼦
方式一:在网页上登录 方式二:在设备上登录
如果显示设备不支持触屏,请使用遥控器进行操作。

󱉑  󰥇  󰥃󰴻󰵠󳆁󱩳󰼻󰤹󰥣󴠘󰼦
② 在 CTP18 上选择需要配对的 MeetingBar A20。
③ 在 CTP18 上输入与 MeetingBar A20 连接的显示器上的配对码。
󵹟󵹦 󴰿󱜜󴒺󵍽
󵭂󵭃
󵹟󵹦 󴰿󱜜󴒺󵍽
󵭂󵭃
15
无线投屏 /无线 USB 外设模式
无线投屏
󵹟󱜩 󵹠󵹞󵹡󵹞 󴫐󱺾󰵥 󵹠󵹞 󳆊  󰼒
󳦦󵹡󳓕󰼽󵭆󰥇  󴫐󱺾󳆊󲅖󳐽󴚳󱐫󲅖󳐽󵻞󲃸󳦿
󱶲󱝲󵫫󴰿󱜜󱴭󰷔󵻟
󵹠󱜩 󵹠󵹞󵹡󵹞 󴫐󱺾󰵥󳀻󳰏󰥃󵭆󲯃 󰴱 演示键󴫍󴌾󱶲󱝲 󲃸󳦿󰩙󱝲󰷞󱵨
󵹠󵹞󵹡󵹞 󱉑󳧈󳗱󰪸󳀮󲃸󳦿󳩑󳧜󳆊󱯢󰳬󰥄󲃸󲟨󰪸󳀮
PC
无线 USB 外设模式
󵹟 󱜩 󵹡󵹞 󴫐 󱺾 󰵥 󵹠󵹞 󳆊  󰼒 󳦦󵹡
󳓕󰼽󵭆󰥇  󴫐󱺾󳆊󲅖󳐽󴚳󱐫󲅖󳐽󵻞󲃸󳦿󱶲󱝲
󵫫󴰿󱜜󱴭󰷔󵻟
󵹠󱜩 󵹡󵹞 󴫐󱺾󰵥󳀻󳰏󰥃
 󱉑󱩗󰴰󳆊󰧸󳭔󲃸󳦿󰩙󱝲󵫫󳖙󰼒󰥃󵭆󲯃󰴱BYOD 模式>
击传屏
󲨢󳐽󵀠
󲃸󳦿󱶲󱝲󴒺󵍽
󵭂󵭃
󲃸󳦿  󱐺󴚳
󴒺󵍽 
󲃸󳦿  󱐺󴚳
󴒺󵍽󵭂󵭃
有线投屏 /有线 USB 外设模式
有线投屏
2
1
󳩑󳦿
󱥆󴩜󱺾󰼒󳆊  󳦿
PC


 󳦿
󳀮󰤹󲍎󳩑󳦿󴫐󱺾  󰥇 󵭆󳀮  󳦿󱴳  󳦿󴫐󱺾  󰥇󳀻󳰏
 󳦿󴫐󱺾󱴭󰷔󰼽󵭆󳗍󰺣󱨞󱓮󱶲󱝲
 󳦿󴫐󱺾󱴭󰷔󰼽󵭆󰥇  󴰿󱜜󱒠󳆊  󰥃󱻩󳐽是否进入 BYOD 模式󵭆󲯃󰴱
取消󵭆󱨞󱓮󱶲󱝲
󲈟󳦿󱶲󱝲󴒺󵍽
󵭂󵭃



PoE
󵹣󵹟

󲈟󳦿󱶲󱝲󴒺󵍽
󵭂󵭃
󲃸󳦿󱶲󱝲󴒺󵍽
󵭂󵭃
USB 外设模式
󰪸󳀮󰨴󰤹󲃑󱨭󴫻󱸂  󱐺󴚳󲔵󱨭󵹛
 󱉑󱨞󲉏󰵒󱓮󰹉󴫻󱸂󱦑󰼟󲄎󵭆󴫻󱸂 USB 外设模式
 󳆁󱩳󴠘󰼦󰼽󴫍󴌾󰴼󱹻󱦑󰼟
󵹛󱜟󳴧󰵥更多>设置>设备设置>UC 供应商󵭆󴪃󰲞󳚣󲼌󰾇󱛩󳌆󵭂󵦿󴚙󱛩󳌆󵹛󵭃󵭆
󴫻󱸂 USB 外设模式
󵹛󱜟󳴧󰵥置>规>统设置>UC 供应󵭆󴪃󰲞󳚣󲼌󰾇󱛩󳌆󵭂󵦿󴚙󱛩󳌆󵹛󵭃󵭆
󴫻󱸂 USB 外设模式
2. 请参考无线 USB 外设模式有线 USB 外设模式󳆊󲙷󵖐  󰾻 󵭆󴫍󰲞  󱐺󴚳󲔵󱨭
 󱐺󴚳󲔵󱨭󴒺󵍽
16
󰲯󰨏󰷔󳯻󰥇󴰿󰨯󵭆󴛬󰻲󵃶󱥎󰷞󰥦󱫡
󳷢󴯚󳩳󴪹󳔍󰥦󲈟󰨴󰪎󵃟󵎄󵭆󰦘󰼞󱉑  󱻩󰧝 󵭆
󱴮󰨥󰩓󲈟󳇾󱦲󳆊󱤆󳔍󱤨󴫍󴌾󱐨󲼌
固件升级
遥控器介绍(可选)
󳀻󲦞󵀠 
󱩳󰵫󴒺󵍽󵀠 
󱤣󱝣󵀠󵹛󱉑󴒺󵍽󴬌󴛒󲈴󵃥󴛸󲂌󱤣󱝣 
󳳧󱚽󰦂󵀠󵹛󰼞󱚽󰦂󰥳  󰴼󱹻󵀠󳙋 
󵋠󴳁󵀠󵹛󲁗󱑋󳨩󱜲󵀠󵹛󳍲󱚽󵀠󵹛󱜟󳴧󵀠󵹛
󵉉󵋠󵀠
󰥴󵍡󵀠󵹛󱉑󵉍󴬌󴛒󲶿󱬞󰥄󵭆󰪸󳧈󳗱󱈈󰵥󱪣󲉏󳁒󵉑󵹜󴬌󴛒󴪹󳔍󰥦󵭆󱵰󱨞󴬌󴛒󳻘󰺇
󴫆󱈈󵀠
󱸁󰼦󵀠
󰵕󵅕󵀠
󱸛󲉏󵀠
󲂈󱙺  󱙺󳘨󵀠
󲌜󲟺  󳆊󱸢󵀠󰷔󳯻󲂄󴛬󲈴󱪣
󱸢󵀠󱉑󰥆󰼻󲔵󱨭󰥄󳆊󲁈󱸚󳔍
󱧄󰥆󰼻󵭆󴛬󰨞󱛁󵄶󰥳󰳽
󵹠󵹞󰾻 󵹟󵹦󵇰󴑵󰺇󲷵󰹺󳦧
󵹟󱜟󳴧󰵥更多设置设备设置关于󳺴󰼆 󱉙󱉩
󱜟󳴧󰵥设置系统设置关于󳺴󰼆 󱉙󱉩
󱉑󳀻󳰏󳆊󲡡󴒼󵫫󱉙󱉩󲌤󴲾󴪃󰲞󳧈󳗱  󳆊  󱉙󱉩󵭆󰫄󱒥 󱸢 Enter 󵀠
󴪃󰲞󳀮󱵔󰼼󰾻󱛩󳌆󲯃󰴱登录 󵦿󴚙󳀮󱵔󰼼󰥳󵻞󵻟󵭆󱛩󳌆󰥳 󵸳󵸳
󱜟󳴧󰵥设置升级
󱉑󲈋󲃈󱈣󰨯󳆊󰼢󴪫󵭆󲯃󰴱󱜜󱦲󳆃󳵯󲍛󱜟󰲞󱈣󰨯
󲯃󰴱升级
󱉑  󳺴󰼆󲈖󲃈󱈣󰨯
有线 USB 外设模式
󳀮󰤹󲍎󳩑󳦿󴫐󱺾  󰥇 
󴫻󱸂󰨴󰤹󲃑󱨭󴫐󱺾  󰾻 󵹛
A󳀮  󳦿󴫐󱺾  󰥇󳀻󳰏󳆊  󰼒
B󳀮  󴩜  󳦿󴫐󱺾  󰥇󳀻󳰏󳆊  󰼒󰥍󳀮  󳦿󴫐󱺾  󰥇󳀻󳰏
 󴫍󰲞  󱐺󴚳󲔵󱨭󵹛
 󴫐󱺾󱴭󰷔󰼽󵭆󰥇  󴰿󱜜󱒠󳆊  󰥃󱻩󳐽󲅇󰽕󴫍󰲞  󱐺󴚳󲔵󱨭󵭆󳍲󴚙
󰼽󴫍󰲞  󱐺󴚳󲔵󱨭
󳷢󲈿󴰿󱐫󵭆󳀮󴭗󱻀󵫫󱜟󳴧󰵥更多>设置>设备设置>高级功能󲯃󰴱USB外设模式
󲈟󳦿  󱐺󴚳󲔵
󱨭󴒺󵍽󵭂󵭃
󱥎󰷞󰥦󱫡󵭂󵭃 󱥎󰷞󰥦󱫡󵭂󵭃
2
1
󳩑󳦿  PC


 󳦿



PoE
󵹣󵹟

󲈟󳦿  󱐺󴚳󲔵
󱨭󴒺󵍽󵭂󵭃

A
B

17
Lieferumfang
MeetingBar A20
VCR11 AAA-Batterie×2
3 m Ethernet-Kabel 1,8 m HDMI-Kabel ×2
(für das Anzeigegerät)
Kabelbinder×5 Netzteil
×4
×2
×2
Montagehalterung
und Zubehör Silikonpad×2 Kurzanleitung
CTP18 7,5 m Ethernet-Kabel Montagehalterung
und Zubehör Schraubendreher
Fernbedienungspaket Touchpanel-Paket
(Standardzubehör für Zoom-Edition)
Standardzubehör
Optionales Zubehör
2
2
2
Kabelverschlussbox PoE-Adapter
PSE Ethernet-Kabel
(3 m CAT5E FTP-Kabel) Stromkabel
DE
Kabelverschlussbox 3M Klettband
TV-Clip-Halterung
(zur Installation)
VCH51 Freigabe-Set
WPP20 Typ-C-Adapter
WPP20-Adapter für drahtlose Präsentationen
DE
WPP30
WPP30-Adapter für
drahtlose Präsentationen
VCH51 Schnittstelle
Schutzabdeckung
7,5 m
Ethernet-Kabel
0,6 m
HDMI-Kabel
0,6 m
USB-Kabel Typ C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Yealink A20 MeetingBar Kit Mode d'emploi

Taper
Mode d'emploi