ARTHUR MARTIN ELECTROLUX AGH6343LOX Manuel utilisateur

AGH6343

EN

Hob User Manual 2

FR

Table de cuisson Notice d'utilisation 18

DE

Kochfeld Benutzerinformation 36

CONTENTS

Safety information 2

Safety instructions 4

Product description 6

Daily use 7

Hints and tips 8

Care and cleaning 9

Troubleshooting 10

Installation 11

Technical data 16

Energy efficiency 17

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible

for any injuries or damages that are the result of incorrect

installation or usage. Always keep the instructions in a safe

and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

•

Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.

•

If the appliance has a child safety device, this should be

activated.

•

Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

•

Children aged 3 years and under must be kept away from

this appliance when it is in operation at all times.

General Safety

•

WARNING: The appliance and its accessible parts become

hot during use. Care should be taken to avoid touching

2

heating elements. Children less than 8 years of age shall be

kept away unless continuously supervised.

• Do not operate the appliance by means of an external timer

or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or oil can

be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• CAUTION: The cooking process has to be supervised. A

short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the cooking

surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot.

• Do not use a steam cleaner to clean the appliance.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

•

Where the appliance is directly connected to the power

supply, an all-pole isolating switch with a contact gap is

required. Complete disconnection in compliance with the

conditions specified in overvoltage category III must be

guaranteed. The earth cable is excluded from this.

•

When you route the mains cable, make sure that the cable

doesn't come into direct contact (for example using

insulating sleeving) with parts that can reach temperatures of

more than 50°C above room temperature.

•

WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

3

SAFETY INSTRUCTIONS

This appliance is suitable for the following

markets: FR

Installation

WARNING! Only a qualified

person must install this

appliance.

WARNING! Risk of injury or

damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance adjacent to a

door or under a window. This prevents

hot cookware to fall from the appliance

when the door or the window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for air

circulation.

• The bottom of the appliance can get hot.

Make sure to install a non-combustible

separation panel under the appliance to

prevent access to the bottom.

Electrical Connection

WARNING! Risk of fire and

electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in such

a way that it cannot be removed without

tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you

disconnect the appliance from the mains

at all poles. The isolation device must

have a contact opening width of

minimum 3 mm.

4

Gas connection

• All gas connections should be made by

a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the

adjustment of the appliance are

compatible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply is

on the rating plate.

• This appliance is not connected to a

device, which evacuates the products of

combustion. Make sure to connect the

appliance according to current

installation regulations. Pay attention to

requirements regarding adequate

ventilation.

Use

WARNING! Risk of injury, burns

and electrical shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first

use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “off” after each

use.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with water.

• Do not use the appliance as a work

surface or as a storage surface.

• When you place food into hot oil, it may

splash.

WARNING! Risk of fire and

explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

WARNING! Risk of damage to

the appliance.

• Do not keep hot cookware on the

control panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware

fall on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Use only stable cookware with the

correct shape and diameter larger than

the dimensions of the burners.

• Make sure cookware is centrally

positioned on the burners.

• Make sure the flame does not go out

when you quickly turn the knob from the

maximum to the minimum position.

• Use only the accessories supplied with

the appliance.

• Do not install a flame diffuser on the

burner.

• The use of a gas cooking appliance

results in the production of heat and

moisture. Provide good ventilation in the

room where the appliance is installed.

• Prolonged intensive use of the appliance

may call for additional ventilation, for

example opening of a window, or more

effective ventilation, for example

increasing the level of mechanical

ventilation where present.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

5

• Do not let acid liquids, for example

vinegar, lemon juice or limescale

remover, touch the hob. This can cause

matt patches.

• Discoloration of the enamel or stainless

steel has no effect on the performance

of the appliance.

Care and cleaning

WARNING! Do not remove the

buttons, knobs or gaskets from

the control panel. Water may

get inside the appliance and

cause damage.

• Clean regularly the appliance to prevent

the deterioration of the surface material.

• Deactivate the appliance and let it cool

down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use any abrasive products, abrasive

cleaning pads, solvents or metal objects.

• Do not clean the burners in the

dishwasher.

Disposal

WARNING! Risk of injury or

suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains electrical cable close

to the appliance and dispose of it.

• Flat the external gas pipes.

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

PRODUCT DESCRIPTION

Cooking surface layout

1 2

3

4

1

Semi-rapid burner

2

Multi Crown burner

3

Auxiliary burner

4

Control knobs

Control knob

Symbol Description

no gas supply / off position

Symbol Description

ignition position / maxi-

mum gas supply

6

Symbol Description

minimum gas supply

DAILY USE

WARNING! Refer to Safety

chapters.

Burner overview

A

B

D

C

D

A

B

A. Burner cap

B. Burner crown

C. Ignition candle

D. Thermocouple

Ignition of the burner

Always light the burner before

you put on the cookware.

WARNING! Be very careful

when you use open fire in the

kitchen environment. The

manufacturer declines any

responsibility in case of the

flame misuse.

1. Push the control knob down and turn it

counterclockwise to the maximum gas

supply position (

).

2.

Keep the control knob pushed for equal

or less than 10 seconds. This lets the

thermocouple warm up. If not, the gas

supply is interrupted.

3.

Adjust the flame after it is regular.

If after some tries the burner

does not light, check if the

crown and its cap are in correct

positions.

WARNING! Do not keep the

control knob pushed for more

than 15 seconds. If the burner

does not light after 15 seconds,

release the control knob, turn it

into off position and try to light

the burner again after minimum

1 minute.

7

CAUTION! In the absence of

electricity you can ignite the

burner without electrical device;

in this case approach the burner

with a flame, turn the control

knob counter-clockwise to

maximum gas supply position

and push it down. Keep the

control knob pushed for equal

or less than 10 seconds to let

the thermocouple warm up.

If the burner accidentally goes

out, turn the control knob to the

off position and try to light the

burner again after minimum 1

minute.

The spark generator can start

automatically when you switch

on the mains, after installation or

a power cut. It is normal.

Turning the burner off

To put the flame out, turn the knob to the

off position

.

WARNING! Always turn the

flame down or switch it off

before you remove the pans

from the burner.

HINTS AND TIPS

WARNING! Refer to Safety

chapters.

Cookware

CAUTION! Do not use cast iron

pans, potstones, earthenware,

grill or toaster plates. The

stainless steel can become

tarnished if it is too much

heated.

WARNING! Do not put the

same pan on two burners.

WARNING! Do not put unstable

or damaged pots on the burner

to prevent from spill and injury.

CAUTION! Make sure that the

bottoms of pots do not stand

above the control knob,

otherwise the flame heats the

control knob up.

CAUTION! Make sure that pot

handles are not above the front

edge of the cooktop.

CAUTION! Make sure that the

pots are placed centrally on the

burner in order to get maximum

stability and to get lower gas

consumption.

Diameters of cookware

Use cookware with diameters

applicable to the size of burners.

Burner Diameter of

cookware

(mm)

Multi Crown 220 - 260

Semi-rapid (rear) 140 - 180

Semi-rapid (left) 220 - 260

Auxiliary 140 - 180

8

CARE AND CLEANING

WARNING! Refer to Safety

chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface

have no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

Stainless steel

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

• To remove burn food, fat and stubborn

stains, let them soak for a few minutes in

a small amount of mild detergent before

cleaning.

• Use cleaning products designed

specifically for cleaning stainless steel in

order to protect the steel surfaces.

• Do not use cleaning products containing

corrosive chemicals such as chlorides,

do not clean the surface with

disinfectants, stain or rust removers and

immersion cleaners.

Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

3. After you clean the pan supports, make

sure that they are in correct positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre of

the burner.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar. If

not, the dirt can cause damage to the

hob. Take care to avoid burns.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration. Clean

the hob with a moist cloth and non-

abrasive detergent. After cleaning, wipe

the hob dry with a soft cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy

water and dry them carefully before you

put them back on.

Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent

9

difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the conditions

of the gas supply pipe and the pressure

adjuster, if fitted.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

There is no spark when you

try to activate the spark gen-

erator.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If

the fuse is blown again and

again, contact a qualified

electrician.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes im-

mediately after ignition.

Thermocouple is not heated

up sufficiently.

After lightning the flame,

keep the knob pushed for

equal or less than 10 sec-

onds.

The flame ring is uneven. Burner crown is blocked with

food residues.

Make sure that the injector is

not blocked and the burner

crown is clean.

If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre. Give the data

from the rating plate. Make sure, you

operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about the

Service Centre and conditions of guarantee

are in the guarantee booklet.

10

Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO.

03 IT

MADE IN ITALY

TYPE

IP20

0049

A B C

A. Stick it on Guarantee Card and send

this part (if applicable).

B. Stick it on Guarantee Card and keep

this part (if applicable).

C. Stick it on instruction booklet.

INSTALLATION

WARNING! Refer to Safety

chapters.

Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

The rating plate is on the bottom of the

hob.

Model .......................................

PNC .........................................

Serial number ...........................

Gas Connection

WARNING! The following

instructions about installation,

connection and maintenance

must be carried out by qualified

personnel in compliance with

standards and local regulations

in force.

Choose fixed connections or use a flexible

pipe in stainless steel in compliance with

the regulation in force. If you use flexible

metallic pipes, be careful they do not come

in touch with mobile parts or they are not

squeezed. Also be careful when the hob is

put together with an oven.

11

Make sure that the gas supply

pressure of the appliance obeys

the recommended values. The

adjustable connection is fixed to

the comprehensive ramp by

means of a threaded nut G 1/2".

Screw the parts without force,

adjust the connection in the

necessary direction and tighten

everything.

A B C

A.

End of shaft with nut

B.

Washer supplied with the appliance

C.

Elbow supplied with the appliance

Rigid connection:

Carry out connection by using metal rigid

pipes (copper with mechanical end).

"Flexible" connection with mechanical

end:

• Natural gas: connection carry out with

a flexible pipe with mechanical end

which is screwed directly on the elbow

finishing the slope of the appliance.

• Butane/Propane: use a flexible tube,

equipped with it's collars if it is worth

visiting over all it's length and if the

appliance runs only on butane. If the

appliance runs on Propane, use a

flexible pipe with suitable metal end.

Flexible nonmetal pipes connection:

If it is possible to easily control the

connection in its full area, you can use a

flexible pipe. Tightly attach the flexible pipe

by clamps.

Liquid gas

Use the rubber pipe holder for liquid gas.

Always engage the gasket. Then continue

with the gas connection.

The flexible pipe is prepared for apply

when:

• it can not get hot more than room

temperature, higher than 30°C;

• it is no longer than 1500 mm;

• it shows no throttles;

• it is not subject to traction or torsion;

• it does not get in touch with cutting

edges or corners;

• it can be easily examined in order to

make sure its condition.

The control of preservation of the flexible

pipe consists in checking that:

• it does not show cracks, cuts, marks of

burnings on the two ends and on its full

length;

• the material is not hardened, but shows

its correct elasticity;

• the fastening clamps are not rusted;

• expired term is not due.

If one or more defects are visible, do not

repair the pipe, but replace it.

WARNING! When installation is

complete, make sure that the

seal of each pipe fitting is

correct. Use a soapy solution,

not a flame!

Injectors replacement

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the type

of gas you use (see table in "Technical

Information" chapter).

4. Assemble the parts, follow the same

procedure backwards.

5. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply. You can find

this plate in the package supplied with

the appliance.

If the supply gas pressure is changeable or

different from the necessary pressure, you

must fit an applicable pressure adjuster on

the gas supply pipe.

12

Adjustment of minimum level

To adjust the minimum level of the burners:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the knob.

4. With a thin screwdriver, adjust the

bypass screw position (A).

A

5.

If you change:

• from natural gas G20/G25 20/25

mbar to liquid gas, fully tighten the

bypass screw in.

• from liquid gas to natural gas

G20/G25 20/25 mbar, undo the

bypass screw approximately 1/4 of a

turn (1/2 of a turn for Multi Crown

burner).

WARNING! Make sure the

flame does not go out when you

quickly turn the knob from the

maximum position to the

minimum position.

Electrical connection

• Make sure that the rated voltage and

type of power on the rating plate agree

with the voltage and the power of the

local power supply.

• This appliance is supplied with a mains

cable. It has to be supplied with a

correct plug which can hold the load

that the rating plate rates. Make sure

that you install the plug in a correct

socket.

• Always use a correctly installed

shockproof socket.

• Make sure that there is an access to the

mains plug after the installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• There is a risk of fire when the appliance

is in connection with an extension cable,

an adapter or a multiple connection.

Make sure that the ground connection

agrees with the standards and

regulations.

• Do not let the power cable to heat up to

a temperature higher than 90° C.

Make sure that you connect the

blue neutral cable to the terminal

with a letter "N" on it. Connect

the brown (or black) phase

cable to the terminal which has

a letter "L". Keep the phase

cable connected at all times.

Connection cable

To replace the connection cable use only

the special cable or its equivalent. The

cable type is: H03V2V2-FT90.

Make sure that the cable section is

applicable to the voltage and the working

temperature. The yellow / green earth wire

must be approximately 2 cm longer than

the brown (or black) phase wire.

Assembly

1.

13

2.

3.

min.

55 mm

min.

650 mm

560 mm

480 mm

min.

100 mm

30 mm

4.

50 mm

400 mm

If a furniture unit is installed

at a distance of 400 mm

above the hob, there must

be a minimum safety

distance of 50 mm to the left

or right from the edge of the

hob.

5.

6.

7.

8.

9.

A

B

A) supplied seal

B) supplied brackets

14

10.

11.

CAUTION! Install the appliance

only on a worktop with flat

surface.

Possibilities for insertion

The panel installed below the hob must be

easy to remove and let an easy access in

case a technical assistance intervention is

necessary.

Kitchen unit with door

min 6 mm

min 30 mm

60 mm

b

a

min 5 mm

(max 150 mm)

A. Removable panel

B. Space for connections

Kitchen unit with oven

The electrical connection of the hob and the

oven must be installed separately for safety

reasons and to let easy remove oven from

the unit.

15

TECHNICAL DATA

Hob dimensions

Width 595 mm

Depth 510 mm

Bypass diameters

BURNER Ø BYPASS 1/100 mm

Multi Crown 56

Semi-rapid 32

Auxiliary 28

Other technical data

TOTAL POWER:

Gas original: G20/G25 (2E+) 20/25 mbar = 9 kW

Gas replacement: G30 (3+) 28-30 mbar = 629 g/h

G31 (3+) 37 mbar = 618 g/h

Electric supply: 220-240 V ~ 50/60 Hz

Appliance category: II2E+3+

Gas connection: G 1/2"

Appliance class: 3

Gas burners for NATURAL GAS G20/G25 20/25 mbar

BURNER NORMAL POWER

kW

MINIMUM POWER

kW

INJECTOR MARK

Multi Crown 4,0 1,4 146

Semi-rapid 2,0 0,45 96

Auxiliary 1,0 0,33 70

Gas burners for LPG G30/G31 28-30/37 mbar

BURNER NORMAL

POWER

kW

MINIMUM

POWER

kW

INJECTOR

MARK

NOMINAL GAS FLOW g/h

G30 28-30

mbar

G31 37 mbar

Multi Crown 3,65 1,4 095 265 261

Semi-rapid 2,0 0,45 71 145 143

Auxiliary 1,0 0,33 50 73 71

16

ENERGY EFFICIENCY

Product information according to EU 66/2014

Model identification AGH6343LOX

Type of hob Built-in hob

Number of gas burners 4

Energy efficiency per gas burner

(EE gas burner)

Left - Semi-rapid 53.8%

Middle rear - Semi-rapid 53.8%

Right - Multi Crown 54.7%

Middle front - Auxiliary not applicable

Energy efficiency for the gas hob

(EE gas hob)

54.1%

EN 30-2-1: Domestic cooking appliances burning gas - Part 2-1 : Rational use of energy -

General

Energy saving

• Before use, make sure that the burners and pan supports are assembled correctly.

• Use cookware with diameters applicable to the size of burners.

• Center the pot on the burner.

• When you heat up water, use only the amount you need.

• If it is possible, always put the lids on the cookware.

• When the liquid starts to boil, turn down the flame to barely simmer the liquid.

• If it is possible, use a pressure cooker. Refer to its user manual.

ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol .

Put the packaging in applicable containers

to recycle it. Help protect the environment

and human health and to recycle waste of

electrical and electronic appliances. Do not

dispose appliances marked with the symbol

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

17

TABLE DES MATIÈRES

Informations de sécurité 18

Consignes de sécurité 20

Description de l'appareil 23

Utilisation quotidienne 23

Conseils 25

Entretien et nettoyage 26

En cas d'anomalie de fonctionnement 27

Installation 28

Caractéristiques techniques 33

Rendement énergétique 34

Sous réserve de modifications.

INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez soigneusement

les instructions fournies. Le fabricant ne pourra être tenu pour

responsable des blessures et dégâts résultant d'une mauvaise

installation ou utilisation. Conservez toujours les instructions

dans un lieu sûr et accessible pour vous y référer

ultérieurement.

Sécurité des enfants et des personnes vulnérables

• Cet appareil peut être utilisé par des enfants de plus de

8 ans, ainsi que des personnes dont les capacités

physiques, sensorielles et mentales sont réduites ou dont les

connaissances et l'expérience sont insuffisantes, à condition

d'être surveillés ou d'avoir reçu des instructions concernant

l'utilisation sécurisée de l'appareil et de comprendre les

risques encourus.

•

Ne laissez pas les enfants jouer avec l'appareil.

•

Ne laissez pas les emballages à la portée des enfants et

jetez-les convenablement.

•

Tenez les enfants et les animaux éloignés de l'appareil

lorsqu'il est en cours de fonctionnement ou lorsqu'il refroidit.

Les parties accessibles sont chaudes.

•

Si l'appareil est équipé d'un dispositif de sécurité enfants,

nous vous recommandons de l'activer.

•

Les enfants ne doivent pas nettoyer ni entreprendre une

opération de maintenance sur l'appareil sans surveillance.

•

Les enfants de moins de 3 ans doivent être tenus éloignés

de l'appareil en permanence lorsqu'il est en fonctionnement.

18

Sécurité générale

• AVERTISSEMENT : L'appareil et ses parties accessibles

deviennent chauds pendant son fonctionnement. Veillez à ne

pas toucher les éléments chauffants. Les enfants de moins

de 8 ans doivent être tenus à l'écart, à moins d'être

surveillés en permanence.

• Ne faites pas fonctionner l'appareil avec un minuteur externe

ou un système de commande à distance.

• AVERTISSEMENT : Il peut être dangereux de laisser chauffer

de la graisse ou de l'huile sans surveillance sur une table de

cuisson car cela pourrait provoquer un incendie.

• N'essayez JAMAIS d'éteindre un feu avec de l'eau. Éteignez

l'appareil puis couvrez les flammes, par exemple avec un

couvercle ou une couverture ignifuge.

• ATTENTION : Toute cuisson doit être surveillée. Une cuisson

courte doit être surveillée en permanence.

• AVERTISSEMENT : Risque d'incendie ! N'entreposez rien

sur les surfaces de cuisson.

•

Ne posez pas d'objets métalliques tels que couteaux,

fourchettes, cuillères ou couvercles sur la table de cuisson

car ils pourraient chauffer.

•

N'utilisez pas de nettoyeur vapeur pour nettoyer l'appareil.

•

Si le câble d'alimentation est endommagé, il doit être

remplacé par le fabricant, un service de maintenance agréé

ou un technicien qualifié afin d'éviter tout danger.

•

Si l'appareil est relié directement à l'alimentation électrique,

installez un sectionneur avec une ouverture de contact. Il est

indispensable de garantir une déconnexion complète

conformément aux conditions de surtension de catégorie III.

Le fil de terre n'est pas concerné.

•

Lorsque vous acheminez le câble d'alimentation, assurez-

vous qu'il n'entre pas en contact direct (par exemple, à

l'aide d'un manchon isolant) avec des parties pouvant

atteindre des températures supérieures de 50 °C à la

température ambiante.

19

• AVERTISSEMENT : Utilisez uniquement les dispositifs de

protection pour table de cuisson conçus ou indiqués comme

adaptés par le fabricant de l'appareil de cuisson dans les

instructions d'utilisation, ou les dispositifs de protection pour

table de cuisson intégrés à l'appareil. L'utilisation de

dispositifs de protection non adaptés peut entraîner des

accidents.

CONSIGNES DE SÉCURITÉ

Cet appareil est adapté aux marchés

suivants: FR

Installation

AVERTISSEMENT! L'appareil

doit être installé uniquement par

un professionnel qualifié.

AVERTISSEMENT! Risque de

blessure corporelle ou de

dommages matériels.

• Retirez l'intégralité de l'emballage.

• N'installez pas et ne branchez pas un

appareil endommagé.

• Suivez scrupuleusement les instructions

d'installation fournies avec l'appareil.

• Respectez l'espacement minimal requis

par rapport aux autres appareils et

éléments.

• Soyez toujours vigilants lorsque vous

déplacez l'appareil car il est lourd.

Utilisez toujours des gants de sécurité et

des chaussures fermées.

• Isolez les surfaces découpées à l'aide

d'un matériau d'étanchéité pour éviter

que la moisissure ne provoque de

gonflements.

• Protégez la partie inférieure de l'appareil

de la vapeur et de l'humidité.

• N'installez pas l'appareil près d'une

porte ou sous une fenêtre. Les récipients

chauds risqueraient de tomber de

l'appareil lors de l'ouverture de celles-ci.

• Si l'appareil est installé au-dessus de

tiroirs, assurez-vous qu'il y a

suffisamment d'espace entre le fond de

l'appareil et le tiroir supérieur pour que

l'air puisse circuler.

• Le dessous de l'appareil peut devenir

très chaud. Veillez à installer un panneau

de séparation ignifuge sous l'appareil

pour en bloquer l'accès.

Branchement électrique

AVERTISSEMENT! Risque

d'incendie ou d'électrocution.

• L'ensemble des branchements

électriques doit être effectué par un

technicien qualifié.

• L'appareil doit être relié à la terre.

• Avant toute intervention, assurez-vous

que l'appareil est débranché.

• Vérifiez que les paramètres figurant sur

la plaque signalétique correspondent

aux données électriques de votre

réseau.

• Assurez-vous que l'appareil est bien

installé. Un câble d'alimentation lâche et

inapproprié ou une fiche (si présente)

non serrée peuvent être à l'origine d'une

surchauffe des bornes.

• Utilisez le câble d'alimentation électrique

approprié.

• Ne laissez pas le câble d'alimentation

s'emmêler.

• Assurez-vous qu'une protection anti-

électrocution est installée.

• Utilisez un collier anti-traction sur le

câble.

• Assurez-vous que le câble

d'alimentation ou la fiche (si présente)

n'entrent pas en contact avec les

surfaces brûlantes de l'appareil ou les

20

La page est en cours de chargement...

ARTHUR MARTIN ELECTROLUX AGH6343LOX Manuel utilisateur

ARTHUR MARTIN ELECTROLUX AGH6343LOX Manuel utilisateur

dans d''autres langues