DANCO 10839 Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

Insert into pipe. Rotate nut clockwise
until PlugAll does not easily slip inside
pipe. Rotate nut a maximum of 2 full
turns. Then, check for leaks.
Insert into pipe. Rotate nut clockwise until
it has become hand tight. Then, check
for leaks.
Nut
Compression Disk
Rubber Gasket
Threaded Stem
2" PIPE
1 ½" &
2” CLEANOUT
1 ½" PIPE
WARNING: Hand tighten only. Do not overtighten.
CAUTION: Stand clear when pressure testing.
AVERTISSEMENT: Serrez à la main uniquement. Ne serrez pas trop.
ATTENTION: Écartez-vous pendant les tests de pression.
10839C
2727 Chemsearch Boulevard Irving, Texas 75062
©2018 Danco, Inc. All rights reserved.
  • Page 1 1

DANCO 10839 Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues