Legrand LMCP-LI48 Guide d'installation

Taper
Guide d'installation
Wattstopper
®
DLM - DLM GE SWS or TLC Relay to LMCP Retrofit Kits
Installation Instructions • Instructions d’Installation • Instrucciones de Instalación
No: 24813 – 11/16 rev. 1
Catalog Numbers • Les Numéros de Catalogue • Números de Catálogo: LMCP-GE24/LMCP-GE48
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
LMCP-GE24 RETROFIT KIT INSTALLATION
Step 1: Remove all interior components
leaving relays and power supply only.
Fig. 1: Example GE24
panel assembly
Fig. 2: After removing
interior items
Step 3: Install LMRD adapter plate.
Fig. 4: Install LMRD adapter plate
Step 4: Install LMRD and LMPI cards.
CAUTION: Do not overtighten screws.
Fig. 5: LMRD and LMPI mounting details
Step 5:
Connect LMRD card to LMPI.
Connect relays to LMRD card.
Connect power to LMPI.
(See Relay Connection Details for DIP Switch settings.)
Fig. 6: Connection details
Step 6: Apply upgrade label.
Fig. 7: Label location suggestion
Step 2: Remove LMRD cards
from adapter plate.
Fig. 3: Remove LMRD
Mounting plate
screw locations
(Total 4 #6-32
screws for
mounting plate)
LMRD-12-M
P
P/N # 841436
LMRD-12
P/N # 16694
Mounting plate screw location
s
(Total 12 #4-40 screws fo
r
mounting plate)
Mounting plate screw locations
(Total 4 #6-32 screws for
mounting plate)
LMPI-ASSY
P/N # 770431
Power supply connection detail
2
LMCP-GE48 RETROFIT KIT INSTALLATION
Step 1: Remove all interior components,
leaving relays and power supply only.
Step 2: Remove LMRD cards from adapter plate.
Fig. 8: Example GE48
panel ssembly
Fig. 10: Remove LMRDFig. 9: After removing
interior items
Step 3: Install adapter plate.
Mounting plate
screw locations
(Total 4 #6-32
screws for
mounting plate)
NOTE: Only two (2)
screws needed for
bottom plate)
LMRD-12-MP
P/N # 841436
LMRD-12-MP
P/N # 841436
Fig. 11: Adapter plate mounting detail
3
Step 5:
Connect LMRD to LMPI.
Connect relays to LMRD card.
Connect power to LMPI.
(See Relay Connection Details for DIP Switch settings.)
Step 6: Apply upgrade label.
Fig. 13: Connection details Fig. 14: Label location suggestion
Step 4: Install LMRD and LMPI cards.
CAUTION: Do not overtighten screws
Fig. 12: Mounting detail
Mounting plate screw locations
(Total 4 #6-32 screws for
mounting plate)
LMPI-ASSY
(P/N #770431)
Mounting plate screw
locations (Total 24 X
# 4-40 screw fo
r
mounting plate)
LMRD-12
(P/N #16694)
Power supply connection detail
800.879.8585
www.legrand.us/wattstopper
No. 24813 – 11/16 rev. 1
© Copyright 2016 Legrand All Rights Reserved.
© Copyright 2016 Tous droits réservés Legrand.
© Copyright 2016 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free
of defects in materials and workmanship for a
period of five (5) years. There are no obligations
or liabilities on the part of Wattstopper for
consequential damages arising out of, or in
connection with, the use or performance of this
product or other indirect damages with respect
to loss of property, revenue or profit, or cost of
removal, installation or reinstallation.
Wattstopper garantit que ses produits sont
exempts de défauts de matériaux et de fabrication
pour une période de cinq (5) ans. Wattstopper
ne peut être tenu responsable de tout dommage
consécutif causé par ou lié à l’utilisation ou
à la performance de ce produit ou tout autre
dommage indirect lié à la perte de propriété, de
revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos
están libres de defectos en materiales y mano
de obra por un período de cinco (5) años. No
existen obligaciones ni responsabilidades por
parte de Wattstopper por daños consecuentes
que se deriven o estén relacionados con el
uso o el rendimiento de este producto u otros
daños indirectos con respecto a la pérdida
de propiedad, renta o ganancias, o al costo
de extracción, instalación o reinstalación.
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
RELAY CONNECTION DETAILS
Option 1:
5-pin connector
DIP Switch Setting
1, 2, 3, 4, 6 Reserved (OFF)
5 ON (for GE relays)
OFF (for HDR relays)
7 ON: Relays ON/OFF during PnL
OFF: Only pilot LEDs ON/OFF during PnL
8 ON: Pilot LEDs follow logic
OFF: Pilot LEDs follow Pilot
Option 2:
3-pin connector (no pilot)
DIP Switch Setting
1, 2, 3, 4, 6 Reserved (OFF)
5 ON (50 ms pulse width)
7 ON: Relays ON/OFF during PnL
OFF: Only pilot LEDs ON/OFF during PnL
8 ON
PARTS LIST
Part Description Part
Number
Quantity Part Description Part
Number
Quantity
GE24 GE48 GE24 GE48
LMRD-12 #16694 2 4
Cable
Assembly
#841449 2 4
LMPI-ASSY #770431 1 1
Screw #6-32
L=5/16
#17686 8 10
LMRD-12-MP #841436 1 2
Screw #4-40
L=3/8
#03336 12 24
* SWS and TLC are products and property of General Electric (GE).
(LMCP-GE12 assembly shown
as reference)
12345678
ON
12345678
ON
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Legrand LMCP-LI48 Guide d'installation

Taper
Guide d'installation

dans d''autres langues