Zanussi ZFC181 Manuel utilisateur

Catégorie
Congélateurs
Taper
Manuel utilisateur
GEFRIERSCHRANK
CONGELATEUR
FREEZER
CONGELATORE
ZFC 181
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
INSTRUCTION BOOKLET
LIBRETTO ISTRUZIONI
2223 229-61
15
Nettoyage
L’appareil étant convenablement installé, nous vous
conseillons de le nettoyer soigneusement avec de
l’eau tiède savonneuse, pour enlever l’odeur
caractéristique de «neuf».
N’utilisez pas de produits abrasifs, de
poudre à récurer ni d’éponge métallique.
Le congélateur est repéré par le symbole
ce qui signifie qu’il est apte à la congélation de
denrées fraîches, au stockage de produits
surgelés et à la fabrication de cubes de glace.
Mise en service
Enfoncez la fiche dans la prise de courant (le voyant
(D) s’ allume en indiquant que l’appareil est sous
tension).
Tournez le bouton du thermostat (E) vers la droite
sur une position moyenne.
Le voyant (A) s’allume.
Pour arrêter l’appareil tournez le bouton du
thermostat sur la position «O».
Réglage de la température
La température est réglée automatiquement et peut
être augmentée (moins froid) en tournant le bouton
vers les numéros les plus bas ou bien diminuée
(plus froid) en le tournant vers les numéros les plus
élevés.
En tout cas, l’exacte position doit être repérée en
considérant que la température interne dépend des
facteurs suivants:
température ambiante;
fréquence d’ouverture des portes;
quantité d’aliments consers;
emplacement de l’appareil.
Une position moyenne est la plus indiquée.
Pour arrêter le fonctionnement, placez l’indicateur du
bouton en correspondance du symbole «O».
Important
Si le thermostat est réglé sur la position de froid
maximum, lorsque la température ambiante est
élevée et que l'appareil est plein, il est possible
que le compresseur fonctionne en régime
continu. Dans ce cas, il y a un risque de
formation excessive de givre sur la paroi
postérieure à l’intérieur de l’appareil. Pour éviter
cet inconvénient, placez le thermostat sur une
position moins élevée, de façon à permettre un
dégivrage automatique et, par conséquent, des
économies de courant.
Congélation rapide
Pour la mise en congélation rapide appuyez sur la
touche (C).
Le voyant (B) s’allume.
UTILISATION
Tableau de commande
A. Voyant d’alarme
B. Voyant de mise en congélation rapide
C. Touche de congélation rapide
D. Voyant de fonctionnement
E. Bouton du thermostat du congélateur
ABC D E
30
Changing the opening direction of
the door
Before carrying out any operations, remove the plug
from the power socket.
To change the opening direction of the door,
proceed as follows:
1. Remove the ventilation grill (D).
2. Unscrew the bottom hinge (E).
3. Remove the door by releasing it from the top
hinge pin (G).
4. Remove the pin then mount these on the
opposite side.
5. Remove the two plugs, to reveal the holes for the
hinge pivots, and remount them on the other
side.
6. Replace the freezer door.
7. using a 10 mm spanner, unscrew the hinge pin
(E) and reassemble it on the opposite side of the
hinge;
8. Screw down the bottom hinge (E) on the opposite
side by using the screws previously removed.
9. Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
10.Re-assemble the ventilation grill (D).
11.Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch.
Cover the holes left open with the plugs
contained in the documentation pack.
Warning:
After having reversed the opening direction of the
doors check that all the screws are properly
tightened and that the magnetic seal adheres to the
cabinet. If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the
gasket or accelerate this process by heating up the
part involved with a normal hairdrier.
F
D
PR18
F
F
F
E
E
G
D162/a
16
Congélation
Si le congélateur fonctionne déjà en régime de
conservation, pour un meilleur résultat de
congélation, il faut appuyer sur l’interrupteur de
congélation rapide au moins 12 heures avant
l’introduction des aliments.
Ce temps peut être réduit en fonction de la quantité
des aliments.
Maintenez ce réglage pendant les vingt-quatre
heures qui suivent l’introduction du lot de denrées,
puis repassez au régime de conservation.
Tenez compte du pouvoir de congélation de votre
appareil, c’est-à-dire de la quantité maximale de
denrées pouvant être congelée par 24 heures.
Le pouvoir de congélation de votre appareil est de
20 kg.
Placez les aliments à congeler dans les
compartiments supérieurs.
Distribuez les paquets d’après la Fig.
Après écoulement du temps nécessaire à la
congélation, répartissez les produits congelés dans
les tiroirs, de manière à libérer les deux
compartiments pour une prochaine opération de
congélation.
Voyant d’alarme (A)
Le voyant d’alarme s’allume lorsque la température
à l’intérieur du congélateur remonte au-dessus
d’une certaine valeur qui est préjudiciable à une
conservation de longue durée.
II est normal que le voyant d’alarme reste
momentanément allumé lors de la mise en marche
de l’appareil, c’est-à-dire jusqu’à ce que la
température à l’intérieur atteigne la valeur convenant
le mieux à la conservation des aliments.
Conservation des produits
surgelés
A la première mise en fonctionnement ou après un
arrêt prolongé faites fonctionner l’appareil pendant
duex heures au moins avec le bouton du thermostat
sur la position de froid maximum. Ramenez ensuite
le thermostat sur une position moyenne.
Comment utiliser ce compartiment au mieux: si l’on
doit ranger de grandes quantités d’aliments, on peut
enlever de l’appareil tous les tiroirs ou les paniers
(avec exception de celui dernier au-dessous) et
placer directement les aliments sur les clayettes
refroidissantes en faisant attention à ne pas
dépasser la limite de charge se trouvant sur le
côté du compartiment supérieur (là où il est prévu).
Décongélation
Avant d’être utilisés, les aliments congelés ou
surgelés doivent être décongelés dans le
réfrigérateur ou à température ambiante, selon le
temps dont on dispose pour cette opération.
S’il s’agit de produits minces ou divisés, placez-les
directement à cuire: dans ce cas le temps de
cuisson sera plus long.
Glaçons
L'appareil est équipé d'un ou de plusieurs bacs à
glace pour faire des glaçons. Il faut remplir ces bacs
d'eau potable et les placer dans le congélateur.
N’employez pas d’objet métallique pour décoller
les bacs à glace.
Attention
En cas de décongélation accidentelle, par
exemple en cas de coupure de courant, si la
période d’interruption est supérieure à la valeur
du “autonomie, en cas de panne” indiquée dans
le tableau des données techniques, il sera
nécessaire de consommer rapidement les
aliments ou de les cuisiner aussitôt et de les
recongeler (après qu’ils ont refroidi).
10 kg
10 kg
Accumulateurs thermiques
2 accumulateurs thermiques sont fournis dans le
congélateur; ils permettent de prolonger le temps de
conservation des aliments en cas de coupure de
courant ou de panne. Ils doivent être placés dans le
compartiment supérieur.
29
INSTALLATION
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
For safety reasons, minimum ventilation must be as
shown in Fig.
Appliance positioned under overhanging kitchen wall
units (see Fig. A).
Appliance positioned without overhanging kitchen
wall units (see Fig. B).
Attention: keep ventilation openings clear of
obstruction.
Two adjustable feet at the cabinet base allow
accurate levelling of the appliance.
100 mm10 mm
10 mm
A
B
NP007
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply. Voltage
can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
The appliance must be earthed.
The power supply cable plug is provided with a
contact for this purpose.
If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in
compliance with current regulations, consulting a
specialist technician.
The Manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the following
E.E.C. Directives:
- 87/308 EEC of 2/6/87 relative to radio interference
suppression.
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Rear spacers
In the bag with the documentation, there are two
spacers which must be fitted as shown in the
figure.
Slacken the screws and insert the spacer under the
screw head, then re-tighten the screws.
ATTENTION!
It must be possible to disconnect the appliance from
the mains power supply; the plug must therefore be
easily accessible after installation.
D594
17
Conseils pour la congélation
Règles à respecter pour la congélation:
le pouvoir max. de congélation par 24 heures
figure sur la plaque signalétique;
le processus de congélation prend 24 heures. Il
vaut mieux ne pas ajouter d'autres aliments à
congeler pendant ce laps de temps;
préparez de petites portions, de façon à faciliter
la congélation et à permettre de ne décongeler
que la quantité nécessaire;
enveloppez les denrées dans du papier
d'aluminium ou de polythène, en éliminant les
bulles d'air et en fermant bien les paquets;
évitez de placer des produits à congeler en
contact avec des denrées déjà entreposées, pour
éviter d'en élever la température;
ne consommez pas les bâtonnets glacés toute
de suite après les avoir sortis du congélateur. La
température très basse à laquelle ils se trouvent
peut provoquer des brûlures:
indiquez sur chaque paquet la date de
congélation, afin de pouvoir contrôler le temps
d’entreposage;
Les symboles qui figurent sur les tiroirs
correspondent à différents types de produits
congelés.
Les chiffres indiquent la durée de conservation
en mois du type correspondant de produit. La
durée de conservation supérieure ou inférieure
est valable en fonction de la qualité des aliments
et du traitement qu’ils ont subi avant la
congélation.
ne placez ni bouteilles ni boîtes de boissons
gazeuses dans le congélateur, car elles
pourraient éclater.
CONSEILS
Conseils pour la surgélation
Comment utiliser ce compartiment au mieux:
vérifiez que les aliments aient bien été conservés
en magasin;
assurez-vous que le transport, du moment de
l'achat jusqu'à celui de la mise en place dans le
compartiment, dure le moins longtemps possible;
évitez d’ouvrir trop souvent la porte et ne la
laissez ouverte que le temps nécessaire.
Il convient de faire très attention, car les aliments
dégelés, ne peuvent être recongelés.
Ne dépassez jamais la date limite d’utilisation
généralement marquée sur les paquets.
TECHNICAL INFORMATION
164
0,66
241
20
31
1400
600
600
Energy Consumption kWh/24h
Energy Consumption kWh/year
Freezing Capacity kg
Rising time h
Net Frezer Capacity lt.
Dimensions mm
High
Width
Depth
The technical infomation are situated in the rating plate on the internal left side of the appliance .
28
CUSTOMER SERVICE AND SPARE PARTS
If the appliance is not functioning properly, check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is an electricity supply (find out by plugging
in another appliance);
the thermostat knob is in the correct position.
If there are water drops on the bottom of the
cabinet, check that the defrost water drain
opening is not obstructed (see “Defrosting”
section).
If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number
of your appliance which can be found on the
guarantee certificate or on the rating plate located
inside the appliance, on the bottom left-hand side.
18
Important:
Pour cette opération n’utilisez jamais d’objet
métallique qui risquerait de détériorer l’appareil.
N’utilisez jamais de dispositifs mécaniques ou
autres moyens artificiels pour accélérer le
dégivrage, à part ceux préconisés.
L’élévation de température des denrées
congelées peut diminuer leur durée de
conservation.
Dégivrage
Dans le congélateur, par contre, il faut éliminer le
givre à chaque fois qu'il y a une couche épaisse qui
s'est formée (de 4 mm environ), en se servant de la
spatule en plastique qui est livrée avec l'appareil.
Pendant que l'on effectue cette opération, il n'est
pas nécessaire de couper le courant ou d'enlever les
denrées qui se trouvent dans le compartiment. Pour
effectuer un dégivrage complet procédez de la
manière suivante:
1. tournez le bouton du thermostat sur la position
«O» ou débranchez l’appareil;
2. enveloppez les denrées dans plusieurs feuilles
de papier journal et conservez-les dans un
endroit frais;
3. maintenez la porte ouverte,utilisez la spatule
comme gouttière et placez-la dans la partie
centrale, en bas, de l’appareil, placez au-
dessous une cuvette pour recevoir l’eau de
dégivrage.
4. épongez et séchez soigneusement les parois et
le fond; conservez la spatule pour toute utilisation
ultérieure.
5. ramenez le bouton du thermostat sur la position
désirée ou rebranchez l’appareil.
6. Mettez l’appareil en régime de congélation
rapide. Après 2-3 heures de fonctionnement
l’appareil est à nouveau prêt à la conservation
des produits surgelés.
ENTRETIEN
Débranchez l’appareil avant toute
opération.
Attention
Cet appareil contient des hydrocarbures dans son
circuit de réfrigération; l’entretien et la recharge ne
doivent donc être effectués que par du personnel
autorisé.
Nettoyage
N'utilisez jamais des objets métalliques pour
nettoyer l'appareil; vous risquez de l'endommager.
A l'occasion d'un dégivrage complet, lavez I'intérieur
avec de l'eau tiède et du bicarbonate, rincez et
séchez soigneusement.
Lavez la carrosserie avec de l'eau tiède
savonneuse. Passez de temps en temps un produit
à polir.
Ne tirez, déplacez ou endommagez pas les
tubes et/ou câbles à l’intérieur de l’appareil.
Dépoussiérez le condenseur situé à l'arrière de
l'appareil à l'aide d'une brosse ou d'un aspirateur.
Une accumulation de poussière risquerait de
diminuer le rendement de l'appareil.
De nombreux détergents spécifiques pour les
surfaces de cuisine contiennent des agents
chimiques pouvant corroder/endommager les
parties en plastique de cet appareil. Il est donc
recommandé de ne laver le revêtement extérieur
de cet appareil qu’avec de l’eau chaude et un
petit peu de détergent liquide pour assiettes.
Arrêt prolongé
Lorsque l'appareil doit rester à l'arrêt pendant un
certain temps, prenez les précautions suivantes:
débranchez la prise de courant;
videz l'appareil;
dégivrez-le et nettoyez-le à fond;
laissez les portes entrouvertes pour faire circuler de
l'air, de façon à éviter les mauvaises odeurs.
D068
27
Defrosting
The freezer compartment, however, will become
progressively covered with frost. This should be
removed with the special plastic scraper provided,
whenever the thickness of the frost exceeds 4 mm.
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
as follows:
1. pull out the plug from the wall socket or turn the
thermostat knob to the «O» setting;
2. remove any stored food, wrap it in several layers
of newspaper and put it in a cool place;
3. leave the door open, and insert the plastic
scraper in the appropriate seating at the bottom
centre, placing a basin underneath to collect the
defrost water.
4. when defrosting is completed, dry the interior
thoroughly; keep the scraper for future use;
5. turn the thermostat knob back to the required
setting or replace the plug in the power socket.
6. After two or three hours, reload the previously
removed food into the compartment.
MAINTENANCE
Unplug the appliance before carrying out
any maintenance operation.
Warning
This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to prevent
unpleasant smells.
D068
Important:
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
Do not use a maechanical device or any artificial
means to speed up the thawing process other
than those recommended by the manufacturer.
A temperature rise of the frozen food packs,
during defrosting, may shorten their safe storage
life.
Periodic cleaning
Clean the inside with warm water and bicarbonate of
soda.
Rinse and dry thoroughly.
Do not pull, move or damage any pipes
and /or cables inside the cabinet .
Clean the condenser (black grill) and the
compressor at the back of the appliance with a
brush or a vacuum cleaner. This operation will
improve the performance of the appliance and save
electricity consumption.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage the
plastics used in this appliance. For this reason it
is recommended that the outer casing of this
appliance is only cleaned with warm water with a
little washing-up liquid added.
19
ANOMALIE DE FONCTIONNEMENT
Si l'appareil marche mal, il faut contrôler
si la fiche est bien branchée à la prise de courant
et si l'interrupteur est éteint;
s'il n'y a pas de panne de courant;
si les commandes sont bien dans la bonne
position;
s'il y a des traces d'eau au fond du compartiment
et si l'orifice d'écoulement de l'eau de dégivrage
est bouché (voir chapitre “Dégivrage”).
Une fois que tous ces contrôles ont été effectués, si
l'anomalie de fonctionnement persiste, adressez-
vous au Service Après-Vente le plus proche.
Pour que l'intervention soit plus rapide, au
moment de l'appel, il vaut mieux indiquer le code
du modèle et le numéro d'immatriculation, qui se
trouvent sur le certificat de garantie ou sur la
plaque d'immatriculation placée à l'intérieur de
l'appareil, à gauche et en bas.
INFORMATIONS TECHNIQUES
Tous les renseignements techniques sont indiqués sur la plaque signalétique qui se trouve sur le côté gauche
de l’appareil.
164
0,66
241
20
31
1400
600
600
Consommation d’énergie en kWh/24h
Consommation d’énergie en kWh/année
Pouvoir de congélation en kg/24h
Autonomie, en cas de panne, heures
Capacité nette en litres du congélateur
Dimensions en mm
hauteur
largeur
profondeur
26
Hints for freezing
To help you make the most of the freezing process,
here are some important hints:
the maximum quantity of food which can be
frozen in 24 hrs. is shown on the rating plate;
the freezing process takes 24 hours. No further
food to be frozen should be added during this
period;
prepare food in small portions to enable it to be
rapidly and completely frozen and to make it
possible subsequently to thaw only the quantity
required;
wrap up the food in aluminium foil or polythene
and make sure that the packages are airtight;
do not allow fresh, unfrozen food to touch food
which is already frozen, thus avoiding a rise in
temperature of the latter;
water ices, if consumed immediately after
removal from the freezer compartment, can
possibly cause the skin to be freeze burnt;
it is advisable to show the freezing-in date on
each individual pack to enable you to keep tab of
the storage time;
The symbols on the drawers show different types
of frozen goods.
The numbers indicate storage times in months for
the appropriate types of frozen goods. Whether
the upper or lower value of the indicated storage
time is valid depends on the quality of the foods
and pre-treating before freezing.
do not put carbonated liquids (fizzy drinks,
etc.) in the freezer compartment as they may
burst.
HINTS
Hints for storage of frozen food
To obtain the best performance from this appliance,
you should:
make sure that the commercially frozen
foodstuffs were adequately stored by the retailer;
be sure that frozen foodstuffs are transferred
from the foodstore to the freezer in the shortest
possible time;
not open the door frequently or leave it open
longer than absolutely necessary.
Once defrosted, food deteriorates rapidly and
cannot be refrozen.
Do not exceed the storage period indicated by
the food manufacturer.
Branchement électrique
Contrôlez, avant de brancher l’appareil, que le
voltage et la fréquence indiqués sur la plaque
signalétique correspondent à ceux de votre réseau.
Tolérance admise: ±6%.
Pour l’adaptation de l’appareil à des voltages
différents, l’adjonction d’un autotransformateur d’une
puissance adéquate est indispensable.
Il faut absolument brancher l'appareil à une prise
de terre réglementaire.
C'est pour cela que la prise du câble d'alimentation
est munie d'un contact prévu exprès. Si la prise de
courant du réseau domestique n'est pas branchée à
la terre, branchez l'appareil à une prise de terre à
part, conformément aux normes en vigueur, en vous
adressant à un technicien spécialisé.
Le fabricant décline toute responsabilité, si cette
norme de prévention des accidents n'est pas
respectée.
-Cet appareil est conforme aux Directives
Communautaires suivantes:
- 87/308 CEE du 2.6.87 concernant la
suppression des interférences radio-électriques
- 73/23 CEE 19/02/73 (Basse Tension) et
modifications successives;
- 89/336 CEE 03/05/89 (Compatibilité Electro-
magnétique) et modifications successives.
Entretoises postérieures
Dans le sac avec la documentation, il y a deux
entretoises qui doivent être montées comme
indiqué dans la figure.
Desserrez les vis et introduisez les entretoises sous
la tête de vis, puis resserrer.
INSTALLATION
Emplacement
Placez de préférence votre appareil loin d’une
source de chaleur (chauffage, cuisson ou rayons
solaires trop intenses).
Pour des raisons de sécurité, la ventilation doit être
prévue comme indiqué dans la Fig.
Appreil positionné sous armoires murales de
cuisine en surplomb (voir Fig. A).
Appreil positionné sans armoires murales de
cuisine en surplomb (voir Fig. B).
Attention: veillez à ne pas obstruer les
ouvertures de ventilation.
Mettez l’appareil d’aplomb en agissant sur les pieds
réglables.
100 mm10 mm
10 mm
A
B
NP007
Important: L’appareil doit pouvoir être débranché du
secteur ; il est donc nécessaire que la fiche reste
accessible une fois que l’installation est terminée.
D594
25
Storage of frozen food
When first starting-up or after a period out of use,
before putting the products in the compartment let
the appliance run at least two hours on the coldest
setting, then turn the thermostat knob to the normal
operating position.
To obtain the best performance from this appliance,
you should:
if large quantities of food are to be stored, remove all
drawers and baskets from appliance (except for the
last one at the bottom) and place food on cooling
shelves.
Pay careful attention not to exceed load limit stated
on the side of the upper section (where applicable).
Important
In the event of accidental defrosting, for example
due to a power failure, if the power has been off
for longer that the value shown in the technical
characteristics chart under “rising time”, the
defrosted food must be consumed quickly or
cooked immediately and then refrozen (after
cooling).
Thawing
Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.
Small pieces may even be cooked still frozen,
directly from the freezer: in this case, cooking will
take longer.
Ice-cube production
This appliance is equipped with one or more trays
for the production of ice-cubes. Fill these trays with
water, then put them in the freezer compartment.
Do not use metallic instruments to remove the
trays from the freezer.
Freezing fresh food
The 4-star compartment is suitable for
long term storage of commercially frozen food, and
for freezing fresh food.
If the freezer has already been working for some
time, press the Super knob at least 12 hours before
introducing the food into the freezer in order to
ensure better freezing results.
Place the food to be frozen in the compartment as
shown in figure.
In order to freeze the quantity indicated on the rating
plate, arrange the food directly in contact with the
cooling surfaces. If the food is frozen in the baskets,
the maximum quantity freezable is slightly less.
The temperature alarm light (A)
The temperature alarm light turns on automatically
whenever the temperature within the freezer rises
above a certain value which might endanger
satisfactory long-term conservation.
It is perfectly normal for the temperature alarm light
to remain lit up for a short time after the freezer is
initially turned on. It will remain lit up until the
optimum temperature for the conservation of frozen
food is attained.
10 kg
10 kg
Cold accumulators
2 cold accumulators are supplied in the freezer;
these increase the length of time for which food will
keep in the event of a power failure or breakdown.
They must be placed in the top compartment.
2121
Réversibilité de la porte
La porte de ce congélateur est réversible: les sens
d’ouverture peut être modifié en fonction du souhait
de l’utilisateur.
Pour changer le sens d’ouverture de la porte
1. Débranchez l’appareil et procédez comme
indiqué ci-dessous.
2. Otez la grille d’aération (D) qui est fixée par un
ressort.
3. Démontez la charnière inférieure (E) en
vissant les vis de fixation.
4. Dégagez la porte supérieure du pivot (G).
5. Enlevez le pivot et montez-les sur l’autre côté.
6. Enlevez les deux caches, de façon à découvrir
les trous pour les pivots de la charnière, et
remontez-les de l’autre côté.
7. Remontez la porte.
8. vissez le pivot de la charnière (E) avec une clé
de 10 et montez-le sur l’autre côté de l’appareil.
9. Vissez la charnière inférieure (E) sur le côté
opposé en utilisant les vis enlevées
précédemment.
10.Détachez le cache (F) de la grille de ventilation
(D) et remontez-le de l’autre côté.
11.vissez la poignée. La remonter de l’autre côté
après avoir percé les bouchons avec un poinçon.
Couvrez les trous libres avec les bouchons
contenus dans le sachet de la documentation.
12.Remontez la grille d’aeration (D).
La réversibilité des portes une fois effectuée,
contrôlez que les joints magnétiques adhèrent à la
carrosserie. Si la température à l’intérieur de la
pièce est trop basse (en hiver, par exemple), il se
peut que les joints n’adhèrent pas parfaitement.
Dans ce cas, si on ne veut pas attendre que les
joints reprennent leurs dimensions naturelles après
un certain temps, on pourra accélérer ce processus
en chauffant la partie intéressée à l’aide d’un sèche-
cheveux.
F
D
PR18
F
F
F
E
E
G
D162/a
24
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage the finish.
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob toward
lower settings or reduced (colder) rotating the knob
towards higher settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
USE
Control panel
room temperature;
how often the door is opened;
the quantity of food stored;
location of appliance.
A medium setting is generally the most suitable.
Important
If the ambient temperature is high or the
appliance is fully loaded, and the appliance is
set to the lowest temperatures, it may run
continuously causing frost to form on the rear
wall. In this case the dial must be set to a higher
temperature to allow automatic defrosting and
therefore reduced energy consumption.
Quick-freezing
For quick-freezing, press the Super knob (C).
The quick-freezing indicator light (B) will then light
up.
ABC D E
A. Warning light
B. SUPER operating control light
C. Super (quick-freezing) switch
D. Pilot light
E. Thermostat knob
This freezer compartment has been marked with
the symbol , which means that it is
suited to the freezing of fresh foods, the
conservation of frozen foods and the production
of ice-cubes.
Starting
Insert the power supply plug into the nearest wall
socket (the function indicator light (D) will light up
indicating that the freezer is receiving electrical
input.)
Turn the thermostat knob (E) to the right to a
medium setting (the temperature alarm light (A) will
light up).
To turn off the freezer, turn the thermostat knob to
the «O» position.
22
WARNINGS
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is supplied with the appliance in order that the
new owner can be acquainted with the functioning of the appliance and the relevant warnings.
If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock
(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old
appliance. This will prevent it from becoming a death-trap for a child.
These warnings are provided in the interest of safety.You must read them carefully before installing or
using the appliance.
General Safety
This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the product.
It is dangerous to alter the specifications or
modify this product in any way.
Before any cleaning or maintenance work is carried
out, be sure to switch off and unplug the appliance.
This appliance is heavy. Care should be taken
when moving it
Ice lollies can cause frost burns if consumed
straight from the appliance.
Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible
fluid leakages.
The appliance must not be located close to
radiators or gas cookers.
Avoid prolonged exposure of the appliance to
direct sunlight.
There must be adequate ventilation round the
back of the appliance and any damage to the
refrigerant circuit must be avoided.
For freezers only (except built-in models): an
ideal location is the cellar or basement.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.
Service/Repair
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person
This product should be serviced by an authorized
Service Centre, and only genuine spare parts
should be used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunctioning. Refer to your local
Service Centre, and always insist on genuine
spare parts.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging must
therefore only be carried out by authorized
technicians.
Use
The domestic refrigerators and freezers are
designed to be used specifically for the storage
of edible foodstuffs only.
Best performance is obtained with ambient
temperature between +18°C and +43°C (class T);
+18°C and +38°C (class ST); +16°C and +32°C
(class N); +10°C and +32°C (class SN). The
class of your appliance is shown on its rating
plate.
Warning: when the ambient temperature is not
included within the range indicated for the class
of this appliance, the following instructions must
be observed: when the ambient temperature
drops below the minimum level, the storage
temperature in the freezer compartment cannot
be guaranteed; therefore it is advisable to use the
food stored as soon as possible.
Frozen food must not be re-frozen once it has
been thawed out.
Manufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.
The inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage the
appliance beyond repair and cause food loss. DO
NOT USE SHARP INSTRUMENTS to scrape off
frost or ice. Frost may be removed by using a
plastic scraper. Under no circumstances should
solid ice be forced off the liner. Solid ice should be
allowed to thaw when defrosting the appliance.
Printed on recycled paper
23
CONTENTS
Warnings 22
Use 24
Cleaning the interior 24
Starting 24
Temperature regulation 24
Quick-freezing 24
The temperature alarm light 25
Freezing fresh food 25
Storage of frozen food 25
Thawing 25
Ice-cube production 25
Cold accumulators 25
Hints 26
Hints for freezing 26
Hints for storage of frozen food 26
Maintenance 27
Periodic cleaning 27
Periods of no operation 27
Defrosting 27
Customer service and spare parts 28
Technical Information 28
Installation 29
Location 29
Rear spacers 29
Electrical connection 29
Changing the opening direction of the door 30
Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance. Do not use a
mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. Never use
metal objects for cleaning your appliance as it
may get damaged.
Installation
During normal operation, the condenser and
compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the instructions.
Attention: keep ventilation openings clear of
obstruction.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Important: if the supply cord is damaged, it must
be replaced by a special cord or assembly availa-
ble from the manufacturer or its service agent.
If the appliance is transported horizontally, it is
possible that the oil contained in the compressor
flows in the refrigerant circuit. It is advisable to
wait at least two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials.The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities.The materials used on this appliance
marked by the symbol are recyclable.
1 / 1

Zanussi ZFC181 Manuel utilisateur

Catégorie
Congélateurs
Taper
Manuel utilisateur

dans d''autres langues