Insignia NS-GNS2PCD Guide d'installation rapide
- Catégorie
- Accessoires de console de jeux
- Taper
- Guide d'installation rapide
PACKAGE CONTENTS
• Charging station
• AC adapter
• Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
CHARGING YOUR CONTROLLERS
Set your charging station on a at surface, then
gently push your controller down onto your
charging station’s connector as shown below. The
LED indicator lights red when the controller is
correctly seated.
Note: Do not use excess force to connect your controller.
QUICK SETUP GUIDE
Pro Controller
Charging Dock
NSGNS2PCD
FEATURES
• Keeps your Nintendo Switch Pro controllers
charged and ready for play
• Compatible with Nintendo Switch Pro
Controllers
• Includes 4 ft. (1.2 m) cable
• Charges two controllers at once
• Weighted base for stability
SETTING UP THE CHARGING STATION
CAUTION: Do not use your charging station to charge
a tablet. You many damage the tablet.
Plug the AC adapter into a wall outlet, then plug
the other end into the charging station. Your
charging station will turn on and is now ready to
charge your controllers.
LED indicator
lights
Charging
connectors
AC adapter
Status LEDs
Red: Charging in process
Green: Charging complete
Charging
connector
Flat size (W×H): 11.04 x 3.94 in. (280.37 × 100 mm.)
Final folded size: 2.76 x 3.94 in (70 × 100 mm.)
NS-GNS2PCD_19-0391_QSG_V1.ai 1 7/16/2019 1:46:50 PMNS-GNS2PCD_19-0391_QSG_V1.ai 1 7/16/2019 1:46:50 PM
V1 ENGLISH 19-0391
LEGAL NOTICES
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if it is not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet apparel numérique de la classe B est conforme à la norme NMB-003 du Canada.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Made in China
REMOVING YOUR CONTROLLERS
When the LED turns green, hold your charging
station down and lift your controller up and o.
SPECIFICATIONS
Dimensions (H×W×D):
6.1 × 2.8 × 2.2 in. (15.5 × 7.2 × 5.5 cm)
Input:
Charging station: DC 5 V
AC adapter: AC 100-240 V ~ 50/60 Hz 0.2 A
AC adapter output: DC 5 V 1.0 A
Cable length: 4 ft. (1.2 m)
Operating temperature:
41° F ~ 95° F (5° C ~ 35° C)
SAFETY INFORMATION
• You must use the included AC adapter to power the
charging station.
• Do not disassemble any of the components. Refer all
services to qualied personnel only.
• Do not place or store the product in a humid area
and do not expose it to water or rain.
• Use the product only as instructed. Read all
instructions before operating the product.
• Failure to follow these directions may void the
warranty.
NS-GNS2PCD_19-0391_QSG_V1.ai 2 7/16/2019 1:46:50 PMNS-GNS2PCD_19-0391_QSG_V1.ai 2 7/16/2019 1:46:50 PM
-
1
-
2
Insignia NS-GNS2PCD Guide d'installation rapide
- Catégorie
- Accessoires de console de jeux
- Taper
- Guide d'installation rapide
