Hisense RF200D4CSE Manuel utilisateur

Marque: Hisense

Modèle: RF200D4CSE

Catégorie: Frigos

Taper: Manuel utilisateur

English

USER’S OPERATION MANUAL

Before operating this unit, please read this manual

thoroughly, and retain for future reference

RF200D4CSE

For questions about features, operation/performance, parts or service,call:

1-855-344-7367

.....................................................................................................................

Table of Contents

Brief Introduction

Important Safety Instructions

Installing Your New Appliance

Description of the Appliance

Display Controls

Using your Appliance

Cleaning and Care

Helpful Hints and Tips

Trouble Shooting

Disposal of the Appliance

..................................................................................................................... 2

........................................................................................... ......

................................................................................................

...............................................................................................

...................................................................................................................... 12

............................................................................................................

...............................................................................................................

.............................................................................................................

....................................................................................................

Brief Introduction

Please ensure that everyone using this

appliance is familiar with its operation

and safety features. It is important that

you install the appliance correctly and

pay careful attention to the safety

instructions.

We recommend that you keep this user’s

manual with the appliance for future

reference.

This appliance is intended to be used

in households and similar applications

such as:

Thank you for your choosing Hisense. We

are sure you will find your new refrigerator

a pleasure to use. Before you use the

appliance, we recommend that you

carefully read through these instructions,

which provide details about installing and

using the product.

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have supervision or been given

instruction concerning use of the appliance.

Children should be supervised to ensure

that they do not play with the appliance.

Do not store explosive substances such as

aerosol cans with a flammable propellant

in this appliance.

Kitchen areas in shops, offices and other

working environments.

Hotels, motels and other residential

environments.

Bed and breakfast environments.

Catering and similar non-commericial

applications.

WARNING

Connect to potable water supply only.

Do not use mechanical devices or other

means to accelerate the defrosting

process, other than those

recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside

the food storage compartments of the

appliance, unless they are of the type

recommended by the manufacturer.

When disposing of the appliance do so

only at an authorized waste disposal

center. Do not expose to flame.

If the power cord is damaged, it must be

replaced by the manufacturer, its

service agent or similarly qualified

persons in order to avoid a hazard.

Keep ventilation openings, in the

appliance enclosure or in the built-in

structure, clear of obstruction.

General safety and daily use

It is important to use your appliance

safely. We recommend that you follow the

guidelines below.

Store any food in accordance with the

storage instructions from the manufacturer.

Important Safety Instructions

Safety for children and

other persons

Don't try to repair the appliance yourself.

It is dangerous to alter the

specifications or modify this product in

any way. Any damage to the power

cord may cause a short circuit, fire or

electric shock.

Don’t place too much food directly

against the air outlet on the rear wall

of both the refrigerator and freezer

compartment, as it may affect

important air circulation.

Don’t place hot items near the plastic

components of this appliance.

Frozen food must not be refrozen once it

has been thawed out.

Don’t store bottled or canned drinks

(especially carbonated drinks) in the

freezer compartment. Bottles and cans

may explode.

Use caution consuming popsicles or ice

cubes straight from the freezer as this can

cause freezer burn to the mouth and lips.

Keep all packaging away from children

to avoid risk of suffocation.

Protect children from being scalded by

touching the compressor at the rear

bottom of appliance

Don’t place items on top of the

appliance as this could cause injury

should they fall off.

Never allow children to play with the

appliance by hanging or standing over

or on the doors, racks, shelves and

drawers etc.

Electrical Safety

To avoid the risks that are always present

when using an electric appliance, we

recommend that you pay attention to

the instructions about electricity belo

We recommend that you wait for 4 hours

before connecting the appliance to

allow the refrigerant to flow back into

the compressor.

The power plug must be accessible

when the appliance is installed.

This appliance must be grounded.

This appliance is fitted with a plug,

in accordance with local standard.

The plug should be suitable for use in all

houses fitted with sockets in accordance

with current specifications.

Electrical Safety

To avoid the risks that are always present

when using an electric appliance, we

recommend that you pay attention to

the instructions about electricity below.

Unpack and check through the

appliance. Should any damage be

evident, don’t plug in the appliance

and contact the dealer from which

you purchased it immediately. Keep

all packing materials in this case.

The appliance requires single phase

alternating current of 110~115V/60Hz.

If the voltage fluctuates exceeding

the upper limit, an A .C. automatic

voltage regulator of more than 350W

should be applied to the refrigerator

for safe use.

If the fitted plug is not suitable for your

socket outlets, it should be cut off and

carefully disposed of. To avoid a

possible shock hazard, do not insert the

discarded plug into a socket. If in doubt

contact a qualified, registered

electrician.

Make sure that the plug is not squashed

or damaged. Otherwise, it may cause

short circuit, electric shock or overheat

and even cause a fire.

Do not insert the power plug if the

socket is loose, there is a risk of electric

shock or fire.

Switch off the appliance and

disconnect it from the main power

before you clean or move it.

Never unplug the appliance by pulling

on the electrical cord. Always grip the

plug firmly and pull straight out from the

socket to prevent damaging the power

cord.

Any electrical component must be

replaced or repaired by a qualified

electrician or authorized service

engineer. Only genuine replacement

parts should be used.

Do not use electrical appliances such

as ice cream makers inside the food

storage compartments of the

appliance unless they are approved

by the manufacturer.

To avoid eye injury, do not look directly

into the LED light located in the refrigerator

compartment. If it is not functioning

correctly, consult a qualified, registered

electrician or replace it in accordance

with the “Cleaning and Care” chapter.

The refrigerant isobutane (R600a) is

contained within the refrigerant circuit of

the appliance. During transportation and

installation of the appliance, ensure that

none of the components of the refrigerant

circuit become damaged.

The refrigerant (R600a) is flammable.

Don't store products which contain

flammable propellants (e.g. spray cans)

or explosive substances in the appliances.

Refrigerant

Caution: Risk of Fire

Should the refrigerant circuit

be damaged:

Do not use extension cords or multiple

sockets which could cause overloading

of wiring circuits and could cause a fire.

Always plug your appliance into its own

individual electrical socket with a

voltage rating that matches the

appliance’s rating plate.

Do not operate the appliance without the

cover on the interior lighting.

Avoid open flames (candles, lamps

etc. ) and other sources of ignition.

Thoroughly ventilate the room in which

the appliance is situated.

This is appliance is intended to be used in

household and similar applications such

as:

Staff kitchen areas in shops, offices and

other working environments

Farm houses and by clients in hotels,

motels and other residential type

environments;

Bed and breakfast type environments;

Catering and similar non-retail

applications.

Installing Your New Appliance

WARNING

Before using the appliance for the first time,

you should be informed of the following tips.

For proper installation, this refrigerator

must be placed on a level surface of

hard material that is the same height

as the rest of the flooring. This surface

should be strong enough to support a

fully loaded refrigerator.

The rollers, which are not casters, should

be only used for forward or backward

movement. Moving the refrigerator

sideways may damage your floor and

the rollers.

In order to improve efficiency of the

cooling system and save energy, it is

necessary to maintain good ventilation

around the appliance for the dissipation

of heat. For this reason, sufficient clear

space should be available around the

refrigerator.

Ventilation of appliance

Suggestion:

It is advisable for there to be at least

2"(50mm) of clearance from the

back ofthe fridge to the wall, at least

(mm)of clearance from its

top, at least 1/2"(12mm) from its side

to the wall and aclear space in front

to allow the doorsto open 125°, as

shown in the followingdiagram.

This appliance performs well within the

climate class from N to T shown in the table

below. It may not work properly if left at a

temperature above or below the indicated

range for a long period.

Stand your appliance in a dry place to

avoid high moisture.

Keep the appliance out of direct sunlight,

rain or frost. Stand the appliance away

from heat sources such as stoves, fires or

heaters.

Climate class

+50°F to + 90°F

+61°F to + 90°F

+61°F to + 100°F

+61°F to + 109°F

Ambient temperature

Note:

2” Above

2” Behind

1/2” Each Side

The height of a door can be adjusted using the

provided Snap Rings.

Adjusting Door Height and Door Gap

To adjust the Height of Door

1. Check the height difference between the

doors and then lift and hold the lowest door

to be even with the other.

2. Insert a suitably sized Snap Ring between the

Door and the Hinge as shown.

Contains Small Parts, Keep the Snap

Rings Away From Babies and Children.

WARNING!

IMPORTANT !

1. Insert only one Snap Ring. If you insert

two or more Snap Rings, they may slip

out or cause a rubbing noise.

2. Do not raise the door too much. The

door may contact and damage the

top cover.

3. Save rermaining Snap Rings for

possible future use.

Snap Ring (4pcs) Wrench(Not provided)

Tools you will need:

Leveling of appliance Door Removal

For sufficient leveling and air circulating

in the lower rear section of the

appliance, the bottom feet may need

to be adjusted. You can adjust them

manually by hand or by using a suitable

tool.

To allow the doors to self-close, tilt the

top backwards by

0.4" - 0.6"(10 -15mm)

Adjustable

bottom feet

Allen Wrench (5/32",4mm)

Philips Screwdriver

Wrench (5/16",8mm)

Electrical Shock Hazard

Disconnect power before removing doors.

Reconnect ground wire before operating.

Failure to do so could result in death or

electric shock.

WARNING!

IMPORTANT: Keep the refrigerator doors closed

until you are ready to lift them from the cabinet.

In case your home access door is too

narrow for the refrigerator to pass

through, remove the refrigerator doors

and drawers. If you do not need to

remove the appliance doors, proceed

to “Installing Water Lines” on page 9.

If you need to remove the doors,

continue below.

1. Unplug refrigerator or disconnect power.

2. Using a Phillips screwdriver, remove the three

screws(A) attaching the hinge cover, and then

remove the hinge cover with the entire

harnesses attached.

Tools you will need(Not provided)

0.4" - 0.6"(10 -15mm)

A B

Adjustable

bottom feet

Front roller

Rear roller

3. Separate the two connectors on the

left side door. To remove the wire

connector, press the top of the

connector (B) and separate it from the

other one. To remove the water coupler

from the hinge, twist and pull the clips

from the coupler.

Remove the water line (C) while

pressing the movable part (D) of the

water line coupler.

4. Remove the 3 screws (E) fixed on

the hinges, with a Wrench (8mm) and

1 ground screws (F) attached to the

hinge with Philips (+) screwdriver.

Remove the upper left door hinge (G).

5. Use our both hands to open the

door more than 90°. Lift it up and

take it off.

6. If necessary, remove the 2 hex head

bolts hinges (I) with an Allen wrench (5 mm).

Remove the lower left door hinge (H).

Replace the Doors

1. If removed, reinstall the bottom hinge.

2. Using two or more people, set the

refrigerator door onto the bottom hinge

3. Insert the top hinge into the top of the door.

4. Using the three screws removed earlier,

fasten the top hinge to the top of the cabinet.

NOTE: Left-hand door only, replace the

ground screw into the top hinge, reattach

the wire harness, reconnect the water line,

make sure the clips are properly connected

to the coupler.

5. Repeat steps 1 through 4 to replace the

opposite door.

6. Using the three screws removed earlier,

reinstall the top hinge cover and control

panel to the top of the cabinet.

Ice & water dispenser with a filter is one

of the helpful features on your new

appliance. To help promote better health,

the water filter removes unwanted

particles from your water.

Please follow the below instructions

carefully for correct installation.

In order for the ice & water dispenser to

operate properly, a water line is required.

-the maximum inlet water pressure is 862kPa;

-the minimum inlet water pressure is 207kPa.

Installing the water lines

1. Power drill and 1/4’’ drill bit.

2. 1/2’’ or adjustable wrench.

3. Flatblade and Philips head screwdrivers.

1 ferrule

(sleeve)

Saddle-type

Shut offvalve

(1/4” outlet)

one 1/4”

compression

1/4” extension

tubing

1 Coupler 2 Clips

WARNING!

Under normal conditions, a200cc

(5.75 oz.) cup can be filled in about

10 seconds.

If the refrigerator is installed in an area

with low water pressure (below 30psi),

you can install a booster pump to

compensate for the low pressure.

The water connection must be made

by a qualified plumber. Operation

outside the water pressure range

may cause malfunction, or severe

and damaging water leaks.

What you need to have before you begin

4. You may need to purchase No.1,

No.2 and No.3 parts to complete

this connection. You may find these

items sold as a kit at a local

hardware store.

Connecting to the water supply line

First, shut off the main water supply.

Cold water line

Pipe clamp

Shut off Valve

Using a power drill and a 1/4’’ drill bit

drill into the cold-water line and

connect the saddle-type shutoff valve.

Connect 1/4’’ extension tubing to shutoff

valve outlet.

Outllet Valve

Packing Nut

Saddle-Type

Shutoff Valve Compression Nut

1/4” Extension

tubing

Ferrule(sleeve)

Flush the tubing. Turn the main water

supply on and flush out the tubing until

the water is clear. Then, shut the water

off at the water valve after about a quart

of water has flushed through the tubing.

(1) (2) (3)

(6)(5)(4)

Connect Water Line to Refrigerator

IMPROTANT:

If you turn the refrigerator on

before the water is connected,turn off the

ice maker.

Unplug refrigerator or disconnect power.

Close shutoff value.

Thread a 1/4 " compression nut and ferrule

(sleeve) onto the free end and of 1/4"

Insert the free and of the 1/4" water line

water line.

into the brass fitting attached to the water

inlet on the back of the refrigerator.

a b c Ferrule (Sleeve) -1 pcs

1/4" Compression Nut - 1 pcs

1/4" Water Line -1 pcs

1/4" Water Line

1/4" Compression

Nut

Ferrule(Sleeve)

Brass Fitting

Water Inlet

Slide the 1/4" compression nut over the

ferrule (sleeve) and screw the 1/4"

compression nut onto the brass ftting.

7. Comfirm 1/4" water line is secure by gently

pulling on it.

8. Turn on water supply and check for leaks.

Correct any leaks

Note:

Ensure that the water line does not get

pinched or bent when installing.

This can result in improper water flow

through the line and will affect the

functionality of the fridge.

Clip

Water line Water line

Coupler

5.Connect the extension tubing line with

the line on the back of the fridge via

the coupler. Fully insert the extension

tubing into the coupler, and then insert

the clip onto the coupler to lock in the

tubing. Do the same with the other

end. After both clips are inserted,

check the line to make sure it is held

firmly by the clips.

6.Turn the water on and check for

leakage.

Note:

Use only the new tubing supplied with the

refrigerator. Old tubing should not be used.

After connected to the water supply line,

please open the water valve to flush the

filter for 5 minutes before use.

The initial dark discoloration of water is

normal.

The water line must be connected

to the cold water pipe. If it is

connected to the hot water pipe,

it may cause the purifier to

malfunction.

Avoid contamination of pipes

during installation.

Connect to potable water supply

only.

WARNING!

1.You may need to purchase below items

to complete this connection. And you

may find these items sold as a kit at a

local hardware store.

Due to unceasing modification of our products, your refrigerator may be slightly different

from this instruction manual, but its functions and using methods remain the same.

To get the best energy efficiency of this product,please place all shelves, drawers and

baskets on their original position as per the illustration above.

Note

Refrigerator LED Light

BWater Filter

Refrigerator Door Bin

Ice-Maker

Rotary Separator

Glass Shelf

GRefrigerator Side Light

Storage Drawer

Middle Storage Drawer

My Fresh Choice Drawer

Freezer Drawer

Down Freezer Drawer

MFridge Door Left

Fridge Door Right

My Fresh Choice Door

Freezer Door

Leveling Leg

Leaving any door open for over 2 minutes will

activate door alarm. The " " icon will flicker,

the control panel will display "dr", and you will

hear a buzzer sound. The buzzer will sound 3

times per minute and will stop after 8 minutes.

In case of alarm, you can touch the Alarm

button to cancel door alarm, then the " "

icon stops flickering and keeps on, the buzzer

sound will stop at the same time. Also door

alarm can be stopped by closing all the doors.

To save energy, please avoid keeping doors

open for a long time when using refrigerator.

Display Controls

Your product has one control panel which is installed on the refrigerator door. Use

your appliance according to the following control guidelines.

The display will illuminate when the

refrigerator is first plugged in. However

the lights will automatically turn off

after 60 seconds

Press and hold "Alarm" for 3 seconds to lock

the whole Control Panel including dispenser

functionIf Control panel is locked, the icon

" " will be on, and none of the buttons on

the Control panel work. To unlock the

Control panel, please press and hold "Alarm"

for 3 seconds again.

Child Lock and Door Alarm

1. Child Lock

2. Door Alarm

This button serves two purposes:

Ice Control

You can touch "Ice Off" button to control the

ice maker. When the Child Lock is off, you

can touch the "Ice Off" " icon to lock the ice

maker, and the icon " " will be illuminated.

If you want to unlock the ice maker, please

touch the "lce Off" icon again, and the icon

" " will be off.

NOTE: When the "Ice Off" is on, it only locks

the ice maker not the dispenser.

Fridge Temperature Control

When you touch the button continuously,

the temperature will be set in the following

sequence.

If you want to decrease the time needed to

cool items in the Fridge, please touch and

hold this button for 3 seconds, the Super Cool

icon " " will be illuminated, the fridge

temperature setting will display 36°F.

Super Cool automatically switches off after

3 hours, and the refrigerator temperature

setting will revert back to the previous setting.

When Super Cool function is on, you can

touch the "Fridge" to switch it off.

Freezer Temperature Control

You can touch the "Freezer" button to

activate the mode to control the freezer

temperature. When you press the button

continuously, the temperature will be set in

the following sequence.

Note: On the Super Cool Function, when you

touch the "Eco" button, Eco function will be

activated, and "Super Cool" mode will be off.

46°F—45°F—44°F—43°F—42°F—41°F

36°F—37°F—38°F—39°F—40°F

7°F—6°F—5°F

-11°F— -10°F

Press and hold the button for 3 seconds,

the icon " " will be illuminated, the freezer

temperature setting will display -11°F.

Super Freeze can quickly lower the

temperature and freeze your food faster

than usual. This can retain more of the

vitamins and nutrition in fresh food and

keep your food longer.

Super Freeze automatically switches off

after 52 hours, and the freezer temperature

setting will revert back to the previous

setting.

When the Super Freeze function is on, you

can touch "Freezer" to switch off the Super

Freeze function.

The Super Freeze is used to perform

pre-freezing and fast freezing in sequence

of Freezer compartment. This function

accelerates the freezing of fresh food

and, at the same time, protects foodstuffs

already stored from undesirable warming.

Note: On the Super Freezer Function, when

you touch the "Eco" button, Eco function

will be activated, and "Super Freezer"

mode will be off.

My Fresh Choice Temperature Control

You can touch the "My Fresh Choice"

button to activate the mode to control the

convertible compartment temperature.

When you press the button continuously,

the temperature will be set in the following

sequence.

Dispenser Control

When the Child Lock is on, the dispenser will

not work. When the Child Lock is off, you

can press the "Cubed" or "Crushed" option

to choose the type of ice to be dispensed,

and press the "Water" button will activate

the water mode. If you choose the function

of Cubed, the " " icon will be illuminated,

choose the fuction of Crushed the " " icon

will be illuminatedand the " " icon will be

illuminated when Water function is chosen.

°F/°C

When the Child Lock is off, you can touch

the "°F/°C" button to switch between

Celsius and Fahrenheit units. The default

state is Fahrenheit display. When it is

switched to Fahrenheit, the icon " " will

be on.

ECO/Energy Saving

You can touch this button to turn Energy

Save mode on and off. When you turn

Energy Save on, the Eco icon " " lights.

The temperature of the fridge is

automatically switched to 43°F(6°C) and

the freezer to 1°F(-17°C).

If Energy Save is off, the icon " " will go off

and the temperature setting will revert

back to the previous setting.

Water Filter

In general, you should change the water

filter every 6 months to ensure the highest

possible water quality.

After the refrigerator has dispensed about

200 gallons of water, the filter icon " "

will blink, reminding you to replace the

water filter.

You can purchase the new filter from the

retailer where you purchased your

refrigerator or the Hisense after-sales

service system. Make sure that the new

filter is the same filter type that came with

your fridge and can be correctly used in

your refrigerator. After you change the

water filter, touch and hold the "Eco"

buttons for 3 seconds to make the

blinking stop.

Demo Mode

Demo mode is for store display, and it

prevents the refrigerator from generating

cool air. In this Demo Mode, the

refrigerator may seem like it is working but

it will not make cool air.

The indicators on the control panel will

show "0F". To cancel this mode, touch

and hold "Alarm" and "°F/°C" buttons at

the same time for 3 seconds until the

buzzer beep a long sound.

To freeze fresh food activate the

Super Freeze function at least 24

hours before placing the food to

complete pre-freezing.

41°F—40°F

0°F— 1°F

Using your Appliance

The refrigerator compartment is suitable

for storage of vegetables and fruit. Food

inside should be sealed for storage in

order to avoid losing moisture or flavor

permeating into other foods.

Caution!

Never close the refrigerator door while

the shelves, crisper and/or telescopic

slides are extended. It may damage

both them and the refrigerator.

Using your fridge compartment

The four doors can be opened and closed

either separately or together.

•There is a mullion on the left-hand side

refrigerator compartment door.

•When closing the left-hand door , the

mullion folds behind the right-hand

door joining the two doors.

•The temperature of the door frame is

controlled to help prevent moisture

from developing on the mullion. The

temperature of the surface may be

warm, which is normal, and will not affect

the performance of the refrigerator.

Opening and Closing Doors

Note: Before closing the left-hand door,

make sure the mullion is folded inward. If the

mullion is pulled outward it may become

damaged when you try to close the door.

The height of the shelves can be adjusted

to fit your storage needs.

1.To remove WKHJODVVshelYHVWLOWXSWKH

IURQWRIWKHVKHOILQWKHGLUHFWLRQVKRZQ

DQGOLIWLWXSYHUWLFDOO\3XOOWKHVKHOIRXW

Door Bins

The refrigerator compartment is provided

with six door bins, which are suitable for

the storage of canned liquid, bottled

drinks and packaged food. To remove

the door, simply lift the racks up and pull

straight out. To relocate the door , slide it

in above the desired location and push

down until it stops.

Do not place too many heavy things in

the baskets. Before you liftup the door

shelf vertically, please take the dood out.

WARNING!

Adjustable Shelves

7RUHLQVWDOOWKHJODVVVKHOYHVWLOWWKHIURQW

RIWKHVKHOIXSDQGJXLGHWKHVKHOIKRRNV

LQWRWKHVORWVDWDGHVLUHGKHLJKW7KHQ

ORZHUWKHIURQWRIWKHVKHOIVRWKDWWKH

KRRNVFDQGURSLQWRWKHVORWV

Push the appropriate ice or water type

button to select what you want to dispense.

Getting Cold Water and Ice

Getting Cold Water

The water dispenser is located in the fridge

door. To get water, push the water button.

Then move your glass down to the

dispenser lever (A) at below suggested

position and press it.

Getting Cubed & Crushed Ice

To get ice, push the cubed or crushed ice

button as required. Then move your

glass down to the dispenser lever(A)

at below suggested position and press it.

WARINING

If a power failure occurs, ice cubes may

melt and then freeze logether when the

power comes back on, causing the

dispenser to stop working. To prevent

this problem, after a power failure, pull

out the ice bucket and residual ice or

water.

Don't push the water dispenser lever

forward without a cup below since it

may cause water spilling.

Ice Maker in Refrigerator

To turn off the Ice Maker

Press the "Ice Off" button to turn off the

ice maker, the " " icon will light up.

And you need to remove all ice cubes

from the ice bucket. If not, the ice cubes

may clump together, making it difficult

to remove them.

Press "Ice Off" Button to turn the ice maker

On and Off. The Ice Off icon " " is off

when the ice maker is functioning.

Following installation, allow 24 hours to

produce the first batch of ice. Discard

the first three batches of ice produced.

Allow 2 to 3 days to fill the ice storage

container.

If the ice in the ice container clumps or

sticks t the wall, break up ice using a

plastic utensil and discard. Do not use

a sharp tool to break up the ice. This can

cause damage to the ice container.

Do not store any items other than ice in

the ice storage container.

If the ice sticks to the wall, break the ice

cubes with plastic utensils and discard.

Removing/Replacing freezer

drawer

NOTE: Unscrew the drawer before taking it out.

1. Pull out drawer to maximum extension.

2. Lift up to remove the drawer.

3. Reverse steps 1 and 2 to replace the drawer.

Note: If you leave the ice cubes in the

bucket, the ice cubes may clump

together making it difficult to remove

them.

CAUTION

•Do not apply excessive force to the

bucket cover. The cover may break.

• To prevent injury, make sure to clean

up any ice or water that has fallen on

the floor.

•The inside of the ice bucket is very cold

when the refrigerator is operating. Don't

reach deep inside the ice bucket. This

may cause physical injury or product

damage.

3. Empty the ice bucket.

1. Open the door at the maximum Angle.

4. When done, put the ice bucket back

into the position, push it firmly straight

back. If the ice bucket does not fit in,

turn the helix 90 degree(see the below

illustration on the right) and try again.

To remove the ice bucket

When you select the ice off mode, remove

all ice cubes from the bucket.

2. Gently lift the ice bucket up, and then

pull it out slowly while holding the bottom

of the bucket with one hand and the side

with the other hand.

125°

Changing the water filter

Please refer to the owner’s manual for

proper maintenance and operation. If this

device is not maintained and operated as

specified in the owner’s manual, there is

a risk of exposure to contaminants.

To drink the freshest and cleanest water from

your refrigerator, change the filter on time.

1. Shut off the water supply. Then pull the

handle under the cover outwards to open

the cover.

2. Pull the water filter down wards and turn it

about 90° counter-clockwise to take it out.

When the filter is disassembled, pay attention

to keep the filter head upward tilted to avoid

water leaking from the front filter part And

the dropped water in the cover should be

cleaned immediately.

3. Insert the new water filter into the hole,

and at the same time turn it about 90°

clockwise until it stops.

To change the water filter, follow below steps:

4. Push the water filter up, and move the

cover up to horizontal and push it until

it locks.

5. Turn the water supply back on.

NOTE: Turn the water supply back on. After

that, you should check the leaks. If leaks

occur, repeat the above operation steps

1-5. If leaks persisit, please stop using it

and call your supporting dealers.

Removing any residual matter

inside the water supply line

1. Turn on the main water supply and supply

water from water supply line.

2. Let the water flow through the dispenser

until it becomes clear (flush for

approximately 5 minutes). This will clean the

water supply system and remove the air

from the lines.

3. Additional flushing may be required in

some households.

4. Open the refrigerator door and make

sure there are no water leaks coming

from the water filler.

NOTE:

Be sure to flush the dispenser thoroughly,

otherwise water may drip from the

dispenser.

This means that there is still air in the line.

Do not dispense continuously. Depress

and release the dispenser pad for cycles

of 30 seconds ON and 60 seconds OFF.

Reverse osmosis water supply

is important:

The pressure of the water supply coming

out of a reverse osmosis system going to

the water inlet valve of the refrigerator

needs to be between 30 and 125 psi

(207 and 862 kpa). If a reverse osmosis

water system is connected to your cold

water supply, the water pressure to the

reverse osmosis system needs to be a

minimum of 40 to 60 psi (276 to 414 kpa).

If the water pressure to the reverse

osmosis system

1. Check to see whether the sediment

filter in the reverse osmosis system is

blocked. Replace the filter if necessary.

2. Allow the storage tank on the reverse

osmosis system to refill after heavy usage.

3. If your refrigerator has a water filter, it

may further reduce the water pressure

when used in conjunction with a reverse

osmosis system. Remove the water filter.

Check to see whether the sediment filter

Flush filter for 5 minuties before use.

To maintain good appearance of your

appliance, you should clean it regularly.

Clean the doors, handles and cabinet

surfaces with a mild detergent and

then wipe dry with a soft cloth.

Exterior cleaning

Interior cleaning

Cleaning and Care

CAUTION!

1. Don’t use sharp objects to clean

with, as they are likely to scratch

the surface.

2. Don’t use thinner, car cleaner,

bleach, oil, abrasive cleansers or

organic solvent such as benzene

for cleaning. They may damage

the surface of the appliance and

may cause fire.

WARNING!

To avoid electrical shock, the

appliance must not be connected

to the main power supply during

cleaning. Before cleaning, switch

the appliance off and remove the

plug from the main socket.

Although this appliance automatically

defrosts, a layer of frost may occur on

the freezer compartment’s interior walls if

the freezer door is opened frequently or

kept open too long. If the frost is too

thick, choose a time when the freezer is

nearly empty and proceed as follows:

Remove existing food and accessory

baskets, unplug the appliance from

the main power and leave the doors

open. Ventilate the room thoroughly to

accelerate the process.

When defrosting is completed, clean

your freezer as described above.

For hygienic reasons the appliance

(including exterior and interior

accessories) should be cleaned at least

once every two months.

Spray water onto a cleaning cloth

instead of spraying directly onto the

surface of the appliance. This helps

ensure an even distribution of moisture

to the surface.

Clean the appliance interior regularly.

It will be easier to clean when food

stocks are low. Wipe the inside of

the fridge and freezer with a weak

solution of baking soda and water, and

then rinse with warm water using a

wrung-out sponge or cloth. Wipe

completely dry before replacing the

shelves and baskets. Thoroughly dry all

surfaces and removable parts before

putting them back into place.

WARNING!

Do not use sharp objects to remove

frost from the freezer compartment.

Only after the interior is completely

dry should the appliance be

switched back on and plugged

back into the main socket.

CAUTION!

Only after the door seals are

completely dry should the

appliance be powered on.

WARNING!

The LED light must be replaced by a

competent person. If the LED light is

damaged, follow the steps below:

1. Unplug your appliance.

2. Remove the light cover by lifting

up and pulling out.

3. Hold the LED light with one hand

and pull it while pressing the

connector latch with the other hand.

4. Replace the LED light andsnap it

correctly in place and replace the

light cover.

General Use Information

Replacing the LED light

When first turning on refrigerator after

a period of non-use, allow the

refrigerator to cool at least 2 hours

before adding food.

Do not block air circulation vents with

stored items.

Store items so that the air can circulate

freely around them.

Cover or wrap stored food well to avoid

transfer of odors.

Once defrosted, food quality will

deteriorate rapidly. Defrosted food

should not be refrozen.

Neither bottled nor canned drinks should

be stored in the freezer compartment.

Bottles and cans may explode.

Door Seal Cleaning

Take care to keep the door seals

clean. Sticky food and drinks can

cause seals to stick to the cabinet

and tear when you open the door.

Wash seal with a mild detergent

and warm water. Rinse and dry it

thoroughly after cleaning.

Opening the door for long periods can

cause a significant increase of the

temperature in the compartments of

the appliance.

Clean regularly the surfaces that can

come in contact with food and

accessible drainage systems.

Store raw meat and fish in suitable

containers in the refrigerator, so that it

is not in contact with or drip onto

other food.

Two-star frozen-food compartments are

suitable for storing pre-frozen food,

storing or making ice cream and

making ice cubes.

Two-star compartments are not

suitable for th freezing of fresh food.

To avoid contamination of food, please

respect the following instructions:

For Meat: (all types) wrap in cling wrap

and place on the glass shelf above the

vegetable drawer. Always follow food

storage times and use by dates

suggested by manufacturers.

Cooked food, cold dishes, etc.:

They should be covered and placed

on any shelf.

Fruit and vegetables:

They should be stored in the special

drawer provided.

Butter and cheese:

Should be wrapped in airtight foil or

plastic film wrap.

Milk bottles:

Should have a lid and be stored in the

door racks.

Hints for refrigeration

Hints for freezing

Hints for the storage of frozen food

It is recommended to label and date

each frozen package in order to keep

track of the storage time.

Switching off your appliance

If the appliance needs to be switched off

for an extended period, the following

steps should be taken to prevent mold on

the appliance.

Remove all food.

Remove the power plug from the

main socket.

Clean and dry the interior thoroughly.

Ensure that all the doors are wedged

open slightly to allow air to circulate.

When first starting-up or after a period

out of use, let the appliance run at least

2 hours on the higher settings before

putting food in the compartment.

Prepare food in small portions to enable

it to be rapidly and completely frozen

and to make it possible to subsequently

thaw only the quantity required.

Wrap up the food in aluminum foil or

cling wraps which are airtight.

Do not allow unfrozen food to touch the

food which is already frozen to avoid

temperature rise of the latter.

Iced products (ice cubes, popsicles): if

consumed immediately after removal

from the freezer compartment, may

cause frost burns to the skin.

Ensure that frozen food has been stored

properly by the food retailer.

Once defrosted, food will deteriorate

rapidly and should not be re-frozen. Do

not exceed the storage period indicated

by the food manufacturer.

Hints for fresh food refrigeration

Do not place hot food directly into the

refrigerator or freezer, the internal

temperature will increase resulting in the

compressor having to work harder and

consume more energy.

Do cover or wrap the food, particularly if it

has a strong flavor.

Place food properly so that air can

circulate freely around it.

Energy Saving Tips

We recommend that you follow the tips

below to save energy.

Avoid keeping the door open for long

periods in order to conserve energy.

Ensure the appliance is away from

any sources of heat (direct sunlight,

electric oven or cooker etc.)

Don’t set the temperature colder than

necessary.

Don’t store warm food or evaporating

liquid in the appliance.

Place the appliance in a well

ventilated, humidity freeroom. Please

refer to the Installing your New

Appliance chapter.

If the diagram shows the correct

combination for the drawers, crisper and

shelves, do not adjust the combination

as this is designed to be the most

energy efficient configuration.

Helpful Hints and Tips

La page charge ...

Hisense RF200D4CSE Manuel utilisateur

Marque: Hisense

Modèle: RF200D4CSE

Catégorie: Frigos

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Hisense RF200D4CSE User manual

Documents connexes

Hisense RT18A2FSD Manuel utilisateur

Hisense RF200D4CSE Manuel utilisateur

Hisense RF200D4CSE Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents