Yealink SIP-T58A with camera & SIP-T58A Guide de démarrage rapide

Smart Business Phone

SIP-T58A with camera & SIP-T58A

English | Deutsch | Español | Français

Quick Start Guide (V84.10)

www.yealink.com

Applies to ﬁrmware version 58.84.0.1 or later.

SIP-T58A with camera

Table of Contents

English ............................................................1

Deutsch.........................................................15

Español..........................................................29

Français.........................................................43

PC

Internet

DC5V

PC

Internet

DC5V

1

Package Contents

The following items are included in your package. If you ﬁnd anything missing, contact your system administrator.

Handset Cord

Ethernet Cable

(2m CAT5E FTP cable)

IP Phone

Handset

Quick Start Guide

Power Adapter

(Optional)

Wall Mount Bracket

(Optional)

Note: The Yealink USB camera CAM50 is an optional accessory for the SIP-T58A IP phone.

We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories

may result in reduced performance.

Assembling the Phone

1. Insert the camera, as shown below:

Adjust Shutter Switch

Adjust Camera Angle

2. Attach the stand and adjust the angle of the touch screen, as shown below:

PUSH

Stand CAM50

Note: The camera can only be connected to the USB port on the top of the phone. And the IP phone only supports the Yealink

original USB camera CAM50.

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

E

N

G

L

I

S

H

2

3. Attach the optional wall mount bracket, as shown below:

PUSH

Note: The reversible tab has a lip which allows the handset to stay on-hook when the IP phone is mounted vertically. For more

information, refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.

4. Connect the handset and optional headset, as shown below:

Note: The headset should be purchased separately.

5. Connect the optional USB ﬂash drive, as shown below:

Note: The USB port (on the rear of the phone) can also be used to connect color-screen expansion module EXP50, USB headset or

DECT dongle kit DD10K. For more information on how to use EXP50, refer to Yealink EXP50 User Guide. For more information on

how to use USB headset, refer to the documentation from the manufacturer. For more information on how to use DD10K, refer

to Yealink Smart Business Phones User Guide.

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

E

N

G

L

I

S

H

3

6. Connect the AC power or PoE, as shown below:

Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may

cause the damage to the phone.

7. Connect to the network, as shown below:

You have two options for network connection. You can select one of them according to the current oﬃce environment.

a) Connect to the wired network:

Note: If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.

b) Connect to the wireless network:

1) Swipe down from the top of the screen to enter the control center.

2) Tap

Setting

->

Basic

->

Wi-Fi

.

3) Tap the

On

radio box in the

Wi-Fi

ﬁeld.

The phone will automatically search for available wireless networks in your area.

4) Select an available wireless network from the list of networks.

5) If the network is secure, enter its password in the

Password

ﬁeld.

6) Tap

Connect

to connect to the wireless network.

A

B

AC Power Option

PoE ( Power over

Ethernet ) Option

Power Adapter

(DC 5V)

IEEE 802.3af compliant

PoE Hub/Switch

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

PC Connection

(Optional)

PC

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

E

N

G

L

I

S

H

4

Hardware Component Instructions

Item

Camera

Power Indicator LED

Touch Screen

HEADSET Key

MUTE Key

REDIAL Key

Speakerphone Key

TRANSFER Key

HOLD Key

MESSAGE Key

Volume Key

Keypad

Speaker

Reversible Tab

Hookswitch

Camera Lens

Camera Indicator LED

Shutter Switch

USB2.0 Port

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

E

N

G

L

I

S

H

After the IP phone is connected to the network and supplied

with power, it automatically begins the initialization process.

After startup, the phone is ready for use. You can conﬁgure

the phone via web user interface or phone user interface.

Welcome

Initializing... Please wait

5

Startup

Conﬁguring Your Phone

Conﬁguring via web user interface

Accessing the web user interface:

1. Swipe down from the top of the screen to enter the control center.

2. Tap

Setting

->

Status

to obtain the IP address of the phone.

3. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or

"192.168.0.10"), and then press

Enter

.

4. Enter the user name (default: admin) and password (default: admin) in the login page and click

Login

.

Network Settings:

Click on

Network

->

Basic

->

IPv4 Conﬁg

You can conﬁgure the network settings in the following ways:

DHCP:

By default, the phone attempts to contact a DHCP server in your network to obtain its valid network

settings, e.g., IP address, subnet mask, gateway address and DNS address.

If the phone cannot contact a DHCP server for any reason, you need to conﬁgure IP address, subnet mask,

gateway address, primary DNS address and secondary DNS address for the phone manually.

Static IP

Address:

Note: The IP phone also supports IPv6, but IPv6 is disabled by default.

The wrong network settings may result in inaccessibility of your phone and may have an impact on the network performance.

Contact your system administrator for more information.

Account Settings:

Click on

Account

->

Register

->

Account X

(X=1, 2, 3...15, 16)

Parameters of the account:

Register Status: It shows the register status of the current account.

Line Active: You can select Enabled/Disabled to enable/disable the account.

Label: It is shown on the touch screen to identify the account.

Display Name: It is shown as Caller ID when placing a call.

Register Name: It is an authenticated ID for authentication provided by ITSP (required).

User Name: It is provided by ITSP for registration (required).

Password: It is provided by ITSP for registration (required).

Server Host: It is provided by ITSP for registration (required).

E

N

G

L

I

S

H

6

Register status icons on the touch screen:

(Green) Registered

(Gray) Register Failed

(Green and Flashing) Registering

Note: Check with your system administrator if any error appears during the registration process or a speciﬁc conﬁguration is required

for your registration.

Conﬁguring via phone user interface

Network Settings:

1. Swipe down from the top of the screen to enter the control center.

2. Tap Setting->Advanced Settings (default password: admin)->Network->WAN Port/Wi-Fi Port/VLAN /Webserver

Type/802.1x/VPN/LLDP/CDP/NAT to conﬁgure the network.

Account Settings:

1. Swipe down from the top of the screen to enter the control center.

2. Tap Setting->Advanced Settings (default password: admin)->Accounts to conﬁgure the account.

Using Your Phone

Status Icons

The icons on the status bar of the touch screen give information about phone:

Icons

Description

(White)

(Green)

(White)

(Green)

Shows that Wi-Fi is turned on.

Shows that the phone is connected to wireless network successfully.

Shows that wired network is unavailable.

Shows that Bluetooth is turned on.

Shows that Bluetooth headset is paired successfully.

Shows that Bluetooth-Enabled mobile phone is paired successfully.

Shows that the phone is locked.

Shows that "Forward" is turned on.

Shows that "Do Not Disturb" is turned on.

Shows that "Auto Answer" is turned on.

Shows that you have missed calls.

Shows that you have unread voice mails.

Shows that "Silent" is turned on.

Shows that a USB ﬂash drive is detected.

E

N

G

L

I

S

H

7

Using the Touch Screen

By default, the IP phone supports three idle screens. The home screen displays as below:

Phone Dialer

Directory

History

Android Keys

Screen Indicator

Status Bar

Digital Clock Widget

Tap to add DSS keys.

To navigate the touch screen:

 Swipe left or right to switch among diﬀerent idle screens.

 Tap to go back to the previous screen.

 Tap to return to the idle screen.

 Tap to view and manage recently used applications.

To change the wallpaper:

1. Long tap the empty spot on the idle screen.

2. Tap WALLPAPERS.

3. Select a desired picture.

4. Tap Set wallpaper.

To add a widget to the idle screen:

1. Long tap the empty spot on the idle screen.

2. Tap WIDGETS.

3. Drag the desired widget up/down/left/right to the destination spot on the idle screen.

Control Center and Notiﬁcation Center

Swipe down from the top of the screen to enter the control center and the notiﬁcation center.

Display the phone's time and date.

Control Center

 To turn on/oﬀ common functions quickly, capture a

screenshot or go to the Settings screen, tap

corresponding icons.

 To adjust the screen brightness, drag the slider.

Notiﬁcation Center

Notiﬁcation center displays the list of Notiﬁcation,

Missed Calls, Voice Mail and Forwarded.

 To delete all notiﬁcations, tap .

 To delete a speciﬁc notiﬁcation, swipe left or right.

 To view the details, tap the desired notiﬁcation

message.

Android keys.

Swipe up from the bottom of the screen to hide this screen.

E

N

G

L

I

S

H

8

Entering and Updating Data

To use onscreen keyboard:

1. Tap the input ﬁeld, the onscreen keyboard will display on the touch screen:

Tap to backspace.

Label automatically to identify the

context-sensitive features.

 Tap Next to go to next ﬁeld.

 Tap Done to conﬁrm the settings.

 Tap Send to dial out the number.

 Tap Go to browse the web page.

Tap to switch to the uppercase input mode.

Tap to switch to the numeric & symbolic input

mode.

Tap to access input options to conﬁgure Input Languages or Android Keyboard Settings (AOSP).

2. When you ﬁnish entering, tap to hide the onscreen keyboard.

To use keypad:

Dial or enter number.

To select a ﬁeld option:

Tap the ﬁeld name, tap the desired option in the pop-up dialog box.

Basic Call Features

Placing a Video/Voice Call

Using the handset:

1. Pick up the handset.

2. Enter the number, and then tap Send.

Using the speakerphone:

1. With the handset on-hook, press .

2. Enter the number, and then tap Send.

Using the headset:

1. With the headset connected, press to activate the headset mode.

2. Enter the number, and then tap Send.

Answering a Video/Voice Call

Using the handset:

Pick up the handset.

Using the speakerphone:

Press .

Using the headset:

Press .

Controlling Video During a Call

To change the video view:

 Tap Full Screen to display the video in full screen.

 Tap to return.

To turn on/oﬀ near-site video during a call:

Swipe down from the top of the screen to enter the control center, tap Video to turn on/oﬀ the near-site video.

E

N

G

L

I

S

H

Ending a Video/Voice Call

Using the handset:

Hang up the handset or tap the End Call soft key.

Using the speakerphone:

Press or tap the End Call soft key.

Using the headset:

Tap the End Call soft key.

Redial

 Press to enter the Placed Calls list, and then tap the desired entry.

 Press twice when the phone is idle to dial out the last dialed number.

Call Mute and Un-mute

 Press to mute the microphone during a call.

 Press again to un-mute the call.

Call Hold and Resume

To place a call on hold:

Press or tap the Hold soft key during an active call.

To resume the call, do one of the following:

 If there is only one call on hold, press or tap the Resume soft key.

 If there is more than one call on hold, tap the call you want to resume, and press or tap the Resume soft key.

Call Transfer

You can transfer a call in the following ways:

Blind Transfer

1. Press or tap the Transfer soft key during a call. The call is placed on hold.

2. Enter the number you want to transfer to.

3. Press .

Semi-Attended Transfer

1. Press or tap the Transfer soft key during a call. The call is placed on hold.

2. Enter the number you want to transfer to, and then press .

3. Press or tap the Transfer soft key when you hear the ring-back tone.

Attended Transfer

1. Press or tap the Transfer soft key during a call. The call is placed on hold.

2. Enter the number you want to transfer to, and then press .

3. Press or tap the Transfer soft key when the second party answers.

Call Forward

To enable call forward:

1. Swipe down from the top of the screen to enter the control center.

2. Tap Setting->Features->Call Forward.

3. Select the desired forward type:

Always Forward----Incoming calls are forwarded unconditionally.

Busy Forward----Incoming calls are forwarded when the phone is busy.

No Answer Forward----Incoming calls are forwarded if not answered after a period of time.

4. Enter the number you want to forward to. For No Answer Forward, tap the After Ring Time ﬁeld, and then tap the

desired ring time to wait before forwarding.

5. Tap to accept the change.

9

E

N

G

L

I

S

H

Call Conference

1. Tap the Conference soft key during an active call. The call is placed on hold.

2. Enter the number of the second party, and then press or tap Conference.

3. Tap the Conference soft key again when the second party answers. All parties are now joined in the conference.

4. Tap the End Call soft key to disconnect all parties.

Voice Message

Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message

center. The power indicator LED slowly ﬂashes red.

To listen to voice messages: (Ensure the voice mail code is already conﬁgured on the phone.)

1. Do one of the following:

 Press .

 Swipe down from the top of the screen to enter the notiﬁcation center, tap Voice Mail and then select the desired

item.

2. Follow the voice prompts to listen to your voice messages.

Volume Adjustment

 Press during a call to adjust the receiver volume of the handset/speakerphone/headset.

 Press when the phone is idle or ringing to adjust the ringer volume.

 Press to adjust the media volume in the corresponding screen.

Call History

1. Tap , and then select the desired call list on the left.

2. Drag up and down to scroll.

3. Tap after the desired entry, and then you can do the following:

 Tap Send to place a call.

 Tap Add to add the entry to the local directory.

 Tap Edit to edit the phone number of the entry before placing a call.

 Tap Blacklist to add the entry to the blacklist.

 Tap Delete to delete the entry from the list.

Contact Directory

To add a contact:

1. Tap , and then select the desired group on the left.

2. Tap to add a contact.

3. Enter a unique contact name in the Name ﬁeld and contact numbers in the corresponding ﬁelds.

4. Tap to accept the change.

To edit a contact:

1. Tap , and then select the desired group on the left.

2. Tap after the desired contact.

3. Edit the contact information.

4. Tap to accept the change.

To delete a contact:

1. Tap , and then select the desired group on the left.

2. Tap after the desired contact and then tap Delete.

3. Tap OK when the touch screen prompts "Delete selected item?"

10

Note: You can split the conference call into two individual calls by tapping the

Split

soft key.

Customizing Your Phone

Note: You can add contacts from call history easily. For more information, refer to

Call History

above.

E

N

G

L

I

S

H

11

Safety Instructions

Operating Ambient Temperatures

 Operating temperature: +32 to 104°F (0 to 40°C)

 Relative humidity: 5% to 90%, noncondensing

 Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty

Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and

the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a

third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for

ﬁnancial damages, lost proﬁts, claims from third parties, etc., arising from the use of this product.

DC symbol

is the DC voltage symbol.

Restriction of Hazardous Substances Directive (RoHS)

The following basic safety precautions should always be followed to reduce risk of ﬁre, electrical shock, and other

personal injury.

General Requirements

 Before you install and use the device, read the safety instructions carefully and observe the situation during

operation.

 During the process of storage, transportation, and operation, please always keep the device dry and clean.

 During the process of storage, transportation, and operation, please avoid collision and crash of the device.

 Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the

appointed maintenance center for repair.

 Without prior written consent, no organization or individual is permitted to make any change to the structure

or the safety design of the device. Yealink is under no circumstance liable to consequences or legal issues

caused by such changes.

 Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected

as well.

Environmental Requirements

 Place the device at a well-ventilated place. Do not expose the device under direct sunlight.

 Keep the device dry and free of dusts.

 Place the device on a stable and level platform.

 Please place no heavy objects on the device in case of damage and deformation caused by the heavy load.

 Keep at least 10 cm between the device and the closest object for heat dissipation.

 Do not place the device on or near any inﬂammable or ﬁre-vulnerable object, such as rubber-made materials.

 Keep the device away from any heat source or bare ﬁre, such as a candle or an electric heater.

 Keep the device away from any household appliance with strong magnetic ﬁeld or electromagnetic ﬁeld, such

as a microwave oven or a refrigerator.

Operating Requirements

 Do not let a child operate the device without guidance.

 Do not let a child play with the device or any accessory in case of accidental swallowing.

 Please use the accessories provided or authorized by the manufacturer only.

 The power supply of the device shall meet the requirements of the input voltage of the device. Please use the

provided surge protection power socket only.

 Before plugging or unplugging any cable, make sure that your hands are completely dry.

 Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub,

washbowl, kitchen sink, wet basement or near a swimming pool.

 Do not tread on, pull, or over-bend any cable in case of malfunction of the device.

 During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power

plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid

lightning strike.

 If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power

plug.

 When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from

the power supply, and unplug the power plug immediately. Contact the speciﬁed maintenance center for

repair.

E

N

G

L

I

S

H

12

ENVIRONMENTAL RECYCLING

Never dispose of the device with domestic waste

Ask your Town Council about how to dispose of it in an environmentally friendly way. The

cardboard box, plastic packaging and player components may be recycled in accordance with

prevailing recycling regulations in your country.

Always adhere to prevailing regulations

Those who fail to do so may be ﬁned or prosecuted in accordance with the law. The crossed out

garbage can that appears on the device means that when it has reached the end of its useful life,

it should be taken to a special waste disposal centre and treated separately to general urban

waste.

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,

Huli District, Xiamen City, Fujian, P.R.C

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,

Huli District, Xiamen City, Fujian, P.R.C

Tel: +86-592-5702000

Fax: +86-592-5702455

E

N

G

L

I

S

H

 Do not insert any object into equipment slots that is not part of the product or auxiliary product.

 Before connecting a cable, connect the grounding cable of the device ﬁrst. Do not disconnect the grounding cable

until you disconnect all other cables.

Cleaning Requirements

 Before cleaning the device, stop using it and disconnect it from the power supply.

 Use a piece of soft, dry and anti-static cloth to clean the device.

 Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils.

Troubleshooting

The unit cannot supply power to Yealink device.

There is a bad connection with the plug.

1. Clean the plug with a dry cloth.

2. Connect it to another wall outlet.

The usage environment is out of operating temperature range.

1. Use in the operating temperature range.

The cable between the unit and the Yealink device is connected incorrectly.

1. Connect the cable correctly.

You cannot connect the cable properly.

1. You may have connected a wrong Yealink device.

2. Use the correct power supply.

Some dust, etc., may be in the port.

1. Clean the port.

Contact your dealer or authorized service facility for any further questions.

Contact Information

YEALINK NETWORK TECHNOLOGY CO.,LTD.

309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.

Strawinskylaan 3127, Atrium Building, 8th ﬂoor, 1077ZX Amsterdam, The Netherlands

YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.

999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Made in China

YEALINK (XIAMEN) NETWORK TECHNOLOGY CO.,LTD

WWW.YEALINK.COM

Declaration of Conformity

Date of Issue: 2019-07-20

We: YEALINK (XIAMEN) NETWORK TECHNOLOGY CO., LTD,

Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C

Declare that the product

Type: Smart Business Phone

Model: SIP-T58A with cameraSIP-T58A

meets the essential requirements and other relevant provisions according to the following EC directive

Directive: R & TTE Directive 1999/5/EC, RED 2014/53/EU

Conformity

The product complies with the following standards:

Safety:

EN 60950-1:2006+A11:2009

+A1: 2010+A12:2011+A2:2013

EMC:

EN 55032: 2012/AC:2013

EN 55024: 2010

EN61000-3-2: 2014

EN61000-3-3: 2013

Radio:

ETSI EN 301 489-1 V2.1.1

ETSI EN 301 489-17 V3.1.1

ETSI EN 300 328 V2.1.1

Health:

EN 62311:2008

Directive 2011/65/EU and (EU)2015/863

of the European Parliament and of the Council of 8 June 2011 and 4 June

2015 on the restriction of the use of certain hazardous substances in electrical and

electronic equipment(RoHS 2.0)

Directive 2012/19/EU

of the European Parliament and of the Council of 4.July.2012 on Waste electrical and

electronic equipment (WEEE)

Regulation (EC) No.1907/2006

of the European Parliament and of the Council of 18.December.2006 on

Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.

Address: Strawinskylaan 3127, Atrium Building, 8th ﬂoor,

1077ZX Amsterdam, the Netherlands

Telephone: +31 (0) 64 61 11 373

Email: [email protected]

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,

Huli District, Xiamen City, Fujian, P.R.C

Tel: +86-592-5702000

Fax: +86-592-5702455

13

NAME: Stone Lu

DATE:

20/July

/2019

TITLE: Vice President

About Yealink

Yealink is a global leading provider of enterprise communication and collaboration solutions, oﬀering video conferencing service to worldwide

enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding technical patents of cloud

computing, audio, video and image processing technology, Yealink has built up a panoramic collaboration solution of audio and video conferencing

by merging its cloud services with a series of endpoints products. As one of the best providers in more than 140 countries and regions including the

US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments.

Technical Support

Visit Yealink WIKI (http://support.yealink.com/) for the latest ﬁrmware, guides, FAQ, Product documents, and more. For better service, we sincerely

recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.

YEALINK (XIAMEN) NETWORK TECHNOLOGY CO.,LTD.

Web: www.yealink.com

PC

Internet

DC5V

PC

Internet

DC5V

15

Verpackungsinhalt

Nachstehende Artikel beﬁnden sich in Ihrer Verpackung. Setzen Sie sich mit Ihrem Systemadministrator in Verbindung, wenn

etwas fehlen sollte.

Hörerkabel

Ethernet-Kabel

(2 m CAT5E-FTP-Kabel)

IP-Telefon

Hörer

Erste Schritte

Netzteil (optional)

Wandhalterung

(optional)

Hinweis: Die Yealink USB-Kamera CAM50 ist ein optionales Zubehörteil für das IP-Telefon SIP-T58A.

Wir empfehlen Ihnen, nur durch Yealink bereitgestellte oder zugelassene Zubehörteile zu verwenden. Die Verwendung von

nicht zugelassenem Drittanbieter-Zubehör kann zu verminderter Leistungsfähigkeit führen.

Installation des Telefons

1. Setzen Sie die Kamera wie nachfolgend dargestellt ein:

Blendenschalter anpassen

Kamerawinkel einstellen

2. Fügen Sie den Ständer an und stellen Sie den Winkel des Touchscreens wie unten gezeigt ein:

DRÜCKEN

Standfuß

CAM50

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

Hinweis: Die Kamera kann nur an den USB-Anschluß im Oberteil des Telefons angeschlossen werden. Und das IP-Telefon

unterstützt nur die original Yealink USB-Kamera CAM50.

D

E

U

T

S

C

H

16

3. Befestigen Sie wie nachstehend gezeigt die optionale Wandhalterung:

Drücken

Hinweis: Der Telefonhörer-Aufhänger besitzt eine kleine Nase, durch die der Hörer auch dann aufgelegt bleibt, wenn das IP-Telefon

senkrecht montiert wurde. Schlagen Sie bitte für weitere Informationen in der Wandmontage-Schnellinstallationsanleitung für

IP-Telefone von Yealink nach.

4. Verbinden Sie den Hörer und das optionale Headset wie nachfolgend dargestellt:

Hinweis: Das Headset ist separat zu erwerben.

5. Schließen Sie das optionale USB-Flash-Laufwerk wie unten dargestellt an:

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

ＰＣ

Ｉｎｔｅｒｎｅｔ

ＤＣ５Ｖ

D

E

U

T

S

C

H

Hinweis: Der USB-Anschluß (auf der Rückseite des Telefons) kann auch genutzt werden, um ein Color-screen Expansion Module EXP50, ein

USB-Headset oder ein DECT Dongle Kit DD10K anzuschließen. Weitere Informationen zur Nutzung des EXP50 ﬁnden Sie in der

EXP50-Bedienungsanleitung von Yealink. Schauen Sie für weiterführende Informationen zur Nutzung des USB-Headsets in den

Dokumenten des jeweiligen Herstellers nach. Weitere Informationen zur Nutzung des DD10K ﬁnden Sie in Ihrer

Bedienungsanleitung des intelligenten Business-Telefons Yealink.

La page charge ...

Yealink SIP-T58A with camera & SIP-T58A Guide de démarrage rapide

Yealink SIP-T58A with camera & SIP-T58A Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents