LG WM8000HVA Le manuel du propriétaire

OWNER’S MANUAL

WASHING MACHINE

WM8000H*A

www.lg.com

Please read this owner's manual thoroughly before operating and keep it handy

for reference at all times.

MFL67360439

ENGLISH

FRANÇAIS

2

TABLE OF CONTENTS

3 IMPORTANT SAFETY INSTRUCTIONS

3 BASIC SAFETY PRECAUTIONS

4 GROUNDING INSTRUCTIONS

5 SAFETY INSTRUCTIONS FOR INSTALLATION

6 SAFETY INSTRUCTIONS FOR USE, CARE,

CLEANING, AND DISPOSAL

7 PRODUCT FEATURES

8

INTRODUCING YOUR WASHING MACHINE

8 Parts and Accessories

9 Control panel features

11 INSTALLATION INSTRUCTIONS

11 Preview installation order

12 Checking and choosing the proper location

13 Unpacking and removing shipping bolts

14 Connecting the water lines

15 Connecting the drain line

16 Leveling the washing machine

17 Plugging in the power cord and grounding

17 Test run

18 PREPARATION

18 Sorting wash loads

18 - Precautions for fabric care before wash cycle

19 - Fabric care labels

19 - Sorting laundry

20 Using detergent/fabric softener

20 - Recommended detergent

20 - Loading the dispenser

22 USING YOUR WASHING MACHINE

22 Basic operation

23 Cycle guide

24 Main cycle

24 - Reduce laundry allergen, ALLERGIENE™

24 - Reduce laundry bacteria, SANITARY

24 - For white fabrics, BRIGHT WHITES™

24 - Blankets or bulky items, BULKY/LARGE

24 - Normal items, COTTON/NORMAL

24 - Heavily soiled items, HEAVY DUTY

24 - Comforters, JUMBO WASH

24 - Wrinkle free items, PERM. PRESS

24 - Sheer items, DELICATES

24 - For towels, TOWELS

24 - For a few items, SMALL LOAD

24 - Items labeled wool or hand-washable, HAND

WASH/WOOL

24 - Quick wash, SPEED WASH

25 Cycle setting buttons

25 Setting options before cycle

25 - Setting the water temperature, WASH TEMP.

25 - Setting spin speed, SPIN SPEED

25 - Setting soil level of laundry, SOIL LEVEL

26 - Adjusts the melody and button tones, SIGNAL

26 - Prewashing, PRE-WASH

26 - Rinse, drain and spin only, RINSE + SPIN

26 - Drum Lighting, DRUM LIGHT

26 - Tumbling clothes to prevent wrinkles,

FRESH CARE

26 - Adding extra rinse cycle, EXTRA RINSE

27 - Presetting the start time, DELAY WASH

27 - High temperature, STEAM

27 - Saving energy, COLDWASH™

27 - Saving time, TURBOWASH™

28 Setting the options during cycle

28 - Button lock feature, CHILD LOCK

28 - Saving customized wash, PGM SAVE

28 - Selecting your customized cycle, CUSTOM PGM

29 MAINTENANCE

29 Care

29 - Care after wash

29 - Care in cold climates

30 Cleaning

30 - Cleaning the drum, TUB CLEAN

31 - Cleaning the detergent dispenser drawer

32 - Cleaning the water inlet filters

33 - Cleaning the drain pump filter

34 - Cleaning the door seal

35 TROUBLESHOOTING

35 Checking error messages

36 Before calling for service

37 SPECIFICATIONS

38 SMART APPLIANCE CONNECTIVITY

38 USING SMARTDIAGNOSIS™

39 WARRANTY

3

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,

electric shock, or to prevent property damage, injury to persons, or death.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.

These words mean:

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not followed.

4

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,

electric shock, or to prevent property damage, injury to persons, or death.

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic

precautions, including the following.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk

of electric shock by providing a path of least resistance for electric current. This appliance is equipped with

a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a

qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not

modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a

qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other flammable or

explosive substances, as they give off vapors that

could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash water.

These substances give off vapors that could ignite

or explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washer, turn

on all hot water faucets and let the water flow from

each for several minutes. This will release any

accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame

during this time.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children.

• Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

• Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service

be performed by a qualified technician.

• See Installation Instructions for grounding

requirements.

• ALWAYS follow the fabric care instructions supplied

by the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch fire.

• Use fabric softeners or products to eliminate static

only as recommended by the manufacturer.

• This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

• Turn off the water faucets and unplug the washer if

the machine is to be left for an extended period of

time, such as during vacations.

• Do not use to dry articles containing foam rubber or

similarly textured rubber-like materials.

• Packaging material can be dangerous for children.

There is a risk of suffocation! Keep all packaging

from children.

• Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

• Do not reach into the appliance if the tub or agitator is

moving.

• WARNING: This product contains chemicals known to

the State of California to cause cancer and birth

defects or other reproductive harm. Wash hands after

handling.

5

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,

electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic

precautions, including the following.

• Refer to INSTALLATION INSTRUCTIONS for detailed

grounding procedures. Installation instructions are

packed with the washer for installer’s reference. If

the washer is moved to a new location, have it

checked and reinstalled by a qualified service tech-

nician. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

• Do not, under any circumstances, cut or remove the

third (ground) prong from the power cord. Failure to

follow this warning can cause serious injury, fire,

electric shock, or death.

• For personal safety, this appliance must be properly

grounded. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

• The power cord of this appliance is equipped with a

3-prong (grounding) plug which mates with a standard

3-prong (grounding) wall outlet to minimize the pos-

sibility of electric shock from this appliance.

• This washer must be plugged into a 120 VAC, 60 Hz

grounded outlet. Failure to follow this warning can

cause serious injury, fire, electric shock, or death.

• Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly ground-

ed. Failure to follow this warning can cause serious

injury, fire, electric shock, or death.

• Where a standard 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have

it replaced with a properly grounded 3-prong wall

outlet. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

• Do not install on carpet. Install washer on a solid floor.

Failure to follow this warning can cause serious

leak damage.

• Do not remove ground prong. Do not use an adapter

or extension cord. Plug into a grounded 3-prong out-

let. Failure to follow these warnings can cause

serious injury, fire, electric shock, or death.

• The washer should always be plugged into its own

individual electrical outlet which has a voltage rating

that matches the rating plate. This provides the best

performance and also prevents overloading house

wiring circuits which could cause a fire hazard from

overheated wires.

• Never unplug your washer by pulling on the power

cord. Always grip plug firmly and pull straight out

from the outlet. Failure to follow this warning can

cause serious injury, fire, electric shock, or death.

• Repair or immediately replace all power cords that

have become frayed or otherwise damaged. Do not

use a cord that shows cracks or abrasion damage

along its length or at either end. Failure to follow this

warning can cause serious injury, fire, electric

shock, or death.

• When installing or moving the washer, be careful not

to pinch, crush, or damage the power cord. Failure to

follow this warning can cause serious injury, fire,

electric shock, or death.

• The washer must be installed and electrically ground-

ed by a qualified service person in accordance with

local codes to prevent shock hazard and assure

stability during operation.

• The washer is heavy. Two or more people may be

needed to install and move the appliance. Failure to

do so can result in back or other injury.

• Store and install the washer where it will not be ex-

posed to temperatures below freezing or exposed to

outdoor weather conditions. Failure to follow this

warning can cause serious leak damage.

• Do not install the washer in humid spaces to reduce

the risk of electric shock. Failure to follow this warn-

ing can cause serious injury, fire, electric shock, or

death.

• To reduce the risk of injury to persons, adhere to all

industry recommended safety procedures including

the use of long sleeved gloves and safety glasses.

Failure to follow all of the safety warnings in this

manual could result in property damage, injury to

persons or death.

6

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,

electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic

precautions, including the following.

SAVE THESE INSTRUCTIONS

• Unplug the washer before cleaning to avoid the risk

of electric shock.

• Never use harsh chemicals, abrasive cleaners, or

solvents to clean the washer. They will damage the

finish.

• Do not put oily or greasy rags or clothing on top of the

washer. These substances give off vapors that

could ignite the materials.

• Do not wash items that are soiled with vegetable or

cooking oil. These items may contain some oil after

laundering. Due to the remaining oil, the fabric may

smoke or catch fire by itself.

• Disconnect this appliance from the power supply

before attempting any user maintenance. Turning the

controls to the OFF position does not disconnect this

appliance from the power supply. Failure to follow

this warning can cause serious injury, fire, electric

shock, or death.

• Do not combine laundry products for use in one load

unless specified on the label.

• Do not mix chlorine bleach with ammonia or acids

such as vinegar. Follow package directions when

using laundry products. Incorrect usage can produce

poisonous gas, resulting in serious injury or death.

• Do not reach into the washer while parts are moving.

Before loading, unloading, or adding items, press the

START/PAUSE button and allow the drum to coast to a

complete stop before reaching inside. Failure to fol-

low this warning can cause serious injury, fire,

electric shock, or death.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children. As children grow, teach

them the proper, safe use of all appliances. Failure to

comply with these warnings could result in serious

injury to persons or death.

• Destroy the carton, plastic bag, and other packing

materials after the washer is unpacked. Children

might use them for play. Cartons covered with rugs,

bedspreads, or plastic sheets can become airtight

chambers. Failure to comply with these warnings

could result in serious injury to persons or death.

• Keep laundry products out of children’s reach. To

prevent injury to persons, observe all warnings on

product labels. Failure to comply with these warn-

ings could result in serious injury to persons or

death..

• Remove the door to the washing compartment to

avoid the danger of children or small animals getting

trapped inside before your washer is removed from

service or discarded. Failure to do so can result in

serious injury to persons or death.

• Make sure the dispenser drawer is closed at all times

when not being filled with laundry products. Failure to

keep the drawer closed can result in personal injury

or flooding.

7

ENGLISH

PRODUCT FEATURES

INVERTER DIRECT-DRIVE MOTOR

The inverter direct drive motor, which is directly attached to the drum, is capable of producing multiple

distinct different motions for optimal washing performance with very little noise and vibration. The motor

assembly also contains fewer moving parts, thus resulting in fewer repairs.

SMARTDIAGNOSIS™

Should you experience any technical difficulty with your washing machine, it has the capability of

transmitting data by phone to the Customer Information Center. The call center agent records the data

transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis

(Refer to page 38).

TUB CLEAN

Regular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and fresh.

MAGNETIC DOOR PLUNGER

Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air

circulation and allow the interior of the machine to dry. To use this feature, after the load has been removed,

do not close the door completely.

When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door

slightly open allowing the interior of the washer to dry.

LARGE CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow

easier access for large items.

CHILD LOCK

Use this option to disable the controls during a wash cycle. This option can prevent children from changing

cycles or operating the machine.

DETERGENT DISPENSER DRAWER

The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, the main laundry

detergent, liquid bleach, and fabric softener into different compartments.

HIGH TEMPERATURE STEAM CYCLES

During LG's unique high-temperature steam cycles, the hot steam helps to remove tough stains.

8

INTRODUCING YOUR WASHING MACHINE

NOTE

y

Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing.

y

For your safety and for extended product life, use only authorized components. The manufacturer is not

responsible for product malfunction or accidents caused by the use of separately purchased unauthorized

components or parts.

y

The images in this guide may be different from the actual components and accessories, and are subject to

change by the manufacturer without prior notice for product improvement purposes.

INTRODUCING YOUR WASHING MACHINE

Parts and Accessories

Parts

Pedestal

(sold separately)

Stacking Kit

(sold separately)

Accessories

Hot/cold water hoses Non-skid pads

Caps for covering

shipping bolt holes

Wrench Tie strap Elbow bracket

(for securing drain hose)

Detergent

dispenser

drawer

(See page 20)

Door

Magnetic Door

Plunger

(see page 3)

Control panel

(See page 9)

Door

seal

Water

circulation

and steam

nozzles

Tub

Leveling

feet

Drain pump filter cover

Drain pump filter

Drain hose

Water inlets

Shipping

bolts

Power cord

Drain hose

Included Accessories Optional Accessories

9

ENGLISH

INTRODUCING YOUR WASHING MACHINE

Button Description

y

Turns the washing machine on and off.

y

(During the wash cycle) stops operation, and cancels the settings.

y

ALLERGIENE™

- For cotton, underwear (see page 24)

y

SANITARY

- For underwear, diapers, etc. (see page 24)

y

BRIGHT WHITES™

- For white fabrics (see page 24)

y

BULKY/LARGE

- For blankets or large bulky items (see page 24)

y

HEAVY DUTY

- For heavily soiled cotton fabric (see page 24)

y

COTTON/NORMAL

- For general laundry, such as cotton T-shirts or towels (see page 24)

y

JUMBO WASH

- For blankets or king size items (see page 24)

y

TOWELS

- For towels (see page 24)

y

PERM. PRESS

- For wrinkle-free fabrics (see page 24)

y

HAND WASH/WOOL

- For wool or hand-wash fabrics (see page 24)

y

DELICATES

- For sheer and delicate fabrics (see page 24)

y

SPEED WASH

- For small quantities of lightly soiled items (see page 24)

y

SMALL LOAD

- For few items (see page 24)

y

TUB CLEAN

- For tub clean (see page 30)

y

Starts or pauses the washing machine cycle.

- If you do not press the

C

button within 4 minutes of selecting a cycle, the washing

machine will turn off automatically.

y

(Press repeatedly) Selects the water temperature for the wash cycle (see page 25).

- Select water temperature from 5 settings.

y

(Press repeatedly) Selects the spin speed in the desired level (see page 25).

- Selects spin speed from 5 settings.

y

(Press repeatedly) Selects a wash cycle by soil level (see page 25).

- Selects soil level from 5 settings.

y

(Press repeatedly) Selects a Melody or Button sound by signal(see page 26).

Control panel features

Operation

Display

Cycle selector

Soil

Level

Selection

Button

Signal

Sound

Selection

Button

Spin

Speed

Selection

Button

Water

Temperature

Selection

Button

Start/

Pause

Button

Power

Button

10

INTRODUCING YOUR WASHING MACHINE

Display

Operation (continued)

Button Description

y

(Press before starting wash cycle) Use this option for extra cleaning power (See page. 27).

y

(Press and hold 3 seconds) Tumbles clothes to prevent wrinkle (See page. 26).

y

Use this option to save time. (See page.27).

y

Use this option to save your energy consumption (See page. 27).

y

(Press before wash cycle) Use this option to rinse detergent from load (See page. 26).

y

(Pres and hold during wash cycle) Lock/unlock the button (See page. 28).

y

Set delay time of starting cycle (See page. 27).

y

(Press before wash cycle) Add an extra rinse to the selected cycle. (See page. 26).

y

(Pres and hold during wash cycle) The drum is equipped with a white LED light that

illuminates when the washer is turned on (See page 26)

y

Use this option to save special combination of settings that you use frequently

(See page. 28).

y

Pre-wash heavily soiled laundry (See page. 26).

Display Icon Description

y

This portion of the display shows which stage of the wash cycle is currently

underway (LOAD SENSING, WASH, RINSE or SPIN).

y

Indicates that the door is locked. The washer door will lock while the washer is operating.

The door can be unlocked by pressing the START/ PAUSE button to stop the washer.

y

This indicator shows that the washer has been set for DELAY WASH. The washer

will start automatically after the set delay time has passed.

y

When the START/PAUSE button is pressed, the washer automatically detects the wash

load (weight) and optimizes the washing time, based on the selected cycle and options.

The display will then indicate the estimated time remaining for the selected wash cycle.

Door lock

indicator

Estimated time remaining/

error message display

(See page 35)

Cycle

process

indicator

Delay

wash

indicator

11

ENGLISH

INSTALLATION INSTRUCTIONS

Preview installation order

WARNING

y

Washer is heavy! Two or more people are required when moving and unpacking the washer.

Failure to do so

can result in back or other injury.

y

Store and install the washer where it will not be exposed to temperatures below freezing or exposed to

outdoor weather conditions.

Failure to follow this warning can cause serious injury, fire, electric shock, or

death.

y

Properly ground washer to conform with all governing codes and ordinances.

Failure to follow this warning

can cause serious injury, fire, electric shock, or death.

y

To reduce the risk of electric shock, do not install the washer in humid spaces.

Failure to follow this warning

can cause serious injury, fire, electric shock, or death.

y

The base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor.

y

Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Checking and choosing

the proper location

Unpacking and

removing shipping bolts

Connecting the water line

Connecting the drain line

Leveling the washing

machine

Plugging in the power

cord and grounding

Test run

12

INSTALLATION INSTRUCTIONS

Checking and choosing the proper

location

Install the washing machine on a solid floor that is

strong and rigid enough to support the weight of the

washing machine, even when fully loaded, without

flexing or bouncing. If the floor has too much flex,

you may need to reinforce it to make it more rigid. If

the floor is not solid, it may cause severe vibration

and noise.

1

Clean the floor before installation.

- Make sure to select solid and smooth ground.

2

Two or more people are needed for moving and

unpacking the washing machine.

3

Allow for sufficient space between the walls and

the washing machine for installation.

Space requirements

You must allow sufficient space for water lines, the

drain line, and airflow.

NOTE

y

Be sure to allow for wall, door, or floor moldings

that may increase the required clearances.

Clearances

4"

(10 cm)

33.1"

(84 cm)

57.9"

(147 cm)

24.8"

(63cm)

29"

73.6 cm

1"

(2.5 cm)

1"

(2.5 cm)

24 in.

2*

(155 cm

2

)

18" min.*

(45.7 cm)

1"*

(2.5 cm)

33.1"

(84 cm)

5"**

(12.7 cm)

48 in.

2*

(310 cm

2

)

14" max.*

(35.6 cm)

3"

*

(7.6 cm)

3"

*

(7.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

1"*

(2.5 cm)

5"**

(12.7 cm)

14" max.*

(35.6 cm)

18" min.*

(45.7 cm)

0"

(0 cm)

40.8"

(103.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

33.1"

(84 cm)

24 in.

2*

(155 cm

2

)

18" min.*

(45.7 cm)

1"*

(2.5 cm)

33.1"

(84 cm)

5"**

(12.7 cm)

48 in.

2*

(310 cm

2

)

14" max.*

(35.6 cm)

3"

*

(7.6 cm)

3"

*

(7.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

1"*

(2.5 cm)

5"**

(12.7 cm)

14" max.*

(35.6 cm)

18" min.*

(45.7 cm)

0"

(0 cm)

40.8"

(103.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

33.1"

(84 cm)

24 in.

2*

(155 cm

2

)

18" min.*

(45.7 cm)

1"*

(2.5 cm)

33.1"

(84 cm)

5"**

(12.7 cm)

48 in.

2*

(310 cm

2

)

14" max.*

(35.6 cm)

3"

*

(7.6 cm)

3"

*

(7.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

1"*

(2.5 cm)

5"**

(12.7 cm)

14" max.*

(35.6 cm)

18" min.*

(45.7 cm)

0"

(0 cm)

40.8"

(103.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

33.1"

(84 cm)

24 in.

2*

(155 cm

2

)

18" min.*

(45.7 cm)

1"*

(2.5 cm)

33.1"

(84 cm)

5"**

(12.7 cm)

48 in.

2*

(310 cm

2

)

14" max.*

(35.6 cm)

3"

*

(7.6 cm)

3"

*

(7.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

1"*

(2.5 cm)

5"**

(12.7 cm)

14" max.*

(35.6 cm)

18" min.*

(45.7 cm)

0"

(0 cm)

40.8"

(103.6 cm)

1"

(2.5 cm)

29"

(73.6 cm)

1"

(2.5 cm)

33.1"

(84 cm)

13

ENGLISH

INSTALLATION INSTRUCTIONS

Unpacking and removing shipping bolts

When removing the washer from the carton base, be

sure to remove the foam drum support in the middle of

the carton base.

If you must lay the washer down to remove the base

packaging materials, always lay it carefully on its

side.

Do NOT lay the washer on its front or back.

1

Starting with the bottom two shipping bolts,

use the wrench (included) to fully loosen all four

shipping bolts by turning them counterclockwise.

Remove the bolt assemblies by wiggling them

slightly while pulling them out.

Shipping

bolt

Retainer

2

Locate the four hole caps included in the

accessory pack and install them in the shipping

bolt holes.

Cap

NOTE

y

Save the bolt assemblies for future use. To

prevent damage to internal components, DO

NOT transport the washer without reinstalling

the shipping bolts.

y

Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which

can lead to permanent damage to the washer.

The cord is secured to the back of the washer

with a shipping bolt to help prevent operation

with shipping bolts in place.

NOTE

y

The floor must be strong and rigid enough to

support the weight of the washer, when fully

loaded, without flexing or bouncing. If your floor

has too much flex, you may need to reinforce it

to make it more rigid. A floor that is adequate

for a top-loading washer may not be rigid

enough for a front loading washer, due to the

difference in the spin speed and direction. If the

floor is not solid, your washer may vibrate and

you may hear and feel the vibration throughout

your house.

y

Before installing the washer, make sure the floor

is clean, dry and free of dust, dirt, water and oils

so the washer feet can not slide easily. Leveling

feet that can move or slide on the floor can

contribute to excess vibration and noise due to

poor contact with the floor.

y

If a drip pan must be used, take extra care

to follow the instructions provided with the

drip pan and make sure the leveling feet are

adjusted for firm and even contact with the pan.

Use of drip pans and failure to properly level the

machine may result in increased vibration and

noise during operation.

Installing on a pedestal or stacking kit

33.1"

(84 cm)

4"

(10 cm)

29"

(73.7cm)

1"

(2.5 cm)

1"

(2.5 cm)

81.61"

(207.3 cm)

NOTE

y

Refer to the instructions packaged with the

optional PEDESTAL or STACKING KIT before

installing with a PEDESTAL or a STACKING KIT.

14

INSTALLATION INSTRUCTIONS

Connecting the water lines

1

Check the rubber seals on both sides of the hose.

- Insert a rubber seal into the threaded fittings on

each hose to prevent leaking.

Rubber seal

Water hose

(To water inlet on the

washing machine)

Rubber seal

Water hose

(To faucet)

2

Connect the water supply hoses to the HOT and

COLD water faucets tightly by hand and then

tighten another 2/3 turn with pliers.

- Connect the blue hose to a cold water faucet and

the red hose to a hot water faucet.

WARNING

y

Do not overtighten.

Damage to the coupling can

result.

3

After connecting inlet hose to water faucets,

turn on the water faucets to flush out foreign

substances (dirt, sand or sawdust) in the water

lines. Let water drain into a bucket, and check the

water temperature.

4

Connect the hoses to the water inlets tightly

by hand and then tighten another 2/3 turn with

pliers.

- Connect the blue hose to the cold water inlet

and the red hose to the hot water inlet.

Cold

water

inlet

Hot water

inlet

WARNING

y

Do not overtighten the hoses.

Overtightening

can damage the valves resulting in leaking and

property damage.

5

Check for leaks by turning on the faucets.

- If water leaks, check steps 1 to 4 again.

NOTE

y

For your safety, and for extended product

life, use only authorized components. The

manufacturer is not responsible for product

malfunction or accidents caused by the use of

separately purchased unauthorized parts.

y

Use new hoses when you install the washing

machine. Do not reuse old hoses. Use only the

inlet hoses provided with the washer. LG does

not recommend the use of aftermarket hoses.

y

Periodically check the hoses for cracks, leaks

and wear, and replace the hoses every 5 years.

y

Do not stretch the water hoses intentionally,

and make sure that they are not crushed by

other objects.

y

Water supply pressure must be between 20 psi

and 120 psi (138–827 kPa). If the water supply

pressure is more than 120 psi, a pressure

reducing valve must be installed.

y

To provide optimum washing performance the

hot water temperature should be set at 120-

135°F (48-57°C) and the cold at 60°F (15°C).

15

ENGLISH

INSTALLATION INSTRUCTIONS

Connecting the drain line

Secure the drain hose in place to prevent moving

and leaking.

NOTE

y

The drain hose should be properly secured.

Failure to properly secure the drain hose can

result in flooding and malfunction.

y

Total height of the house end should not exceed

96 inches (244.8 cm) from the bottom of the

washer.

y

The drain must be installed in accordance with

any applicable local codes and regulations.

y

Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

Using a standpipe

1

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10

cm) from the end of the drain hose. If the drain

hose is extended more than 4 inches (10 cm)

beyond the end of the elbow bracket, mold or

microorganisms could spread to the inside of

the washer.

No more than

4 inches (10 cm)

Elbow bracket

2

Insert the end of the drain hose into the standpipe.

Drain Hose

Elbow Bracket

3

Use a tie strap to secure the drain hose in place.

Using a laundry tub

1

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10

cm) from the end of the drain hose. If the drain

hose is extended more than 4 inches (10 cm)

beyond the end of the elbow bracket, mold, or

microorganisms could spread to the inside of

the washer.

No more than

4 inches (10 cm)

Elbow bracket

2

Hang the end of the drain hose over the side of

the laundry tub.

Elbow Bracket

Drain Hose

3

Use a tie strap to secure the drain hose in place.

16

INSTALLATION INSTRUCTIONS

Leveling the washing machine

The washer tub of your new washing machine

spins at very high speeds. To minimize vibration,

noise, and unwanted movement, the floor must be

perfectly level and solid.

1

Check the washing machine’s level.

- Check the precise level by rocking the top edges

of the washing machine or placing a level on

the washing machine. The slope beneath the

washing machine must not exceed 1°, and all

four leveling feet must rest firmly on the floor.

Level

1°

2

Turn the lower leveling feet clockwise to level the

washing machine.

- Turning the lower leveling feet clockwise raises

the washing machine.

Raise

3

Turn the locknuts counterclockwise and tighten

them when the washing machine is level.

Tighten all 4 lock

nuts securely using

the wrench.

4

Check the washing machine’s level again.

- Push or rock the top edges of the washing

machine gently to make sure that the washing

machine does not rock.

- If the washing machine rocks, repeat steps 1 to 3.

WARNING

y

Using the washing machine without leveling,

it may result in malfunction caused by the

production of excess vibration and noise.

y

If you are installing the washing machine on the

optional pedestal, you must adjust the leveling

feet on the pedestal to level the washing

machine. The washing machine´s leveling feet

should be minimized and turn the locknuts

counterclockwise to secure.

y

Use the leveling feet only when you level the

washing machine.

If you raise the leveling feet

unnecessarily, it may cause abnormal vibration

of the washing machine.

Using non-skid pads (optional)

If you install the washing machine on a slippery

surface, it may move because of excessive vibration.

Incorrect leveling may cause malfunction through

noise and vibration. In the event of this, lay the non-

skid pads under the leveling feet and adjust the level.

1

Clean the floor to attach the non-skid pads.

- Use a dry rag to remove and clean foreign

objects or moisture. If moisture remains, the

non-skid pads may slip.

2

Adjust the level after placing the washing machine

in the installation area.

3

Place the adhesive side of the non-skid pad on the

floor.

- It is most effective to install the non-skid pads

under the front legs. If it is hard to place the pads

under the front legs, place them under the back

legs.

Remove

backing

This side up

Adhesive

side

4

Check the washing machine’s level again.

- Push or rock the top edges of the washing

machine gently to make sure that the washing

machine does not rock. If the washing machine

rocks, level the washing machine again.

17

ENGLISH

INSTALLATION INSTRUCTIONS

Plugging in the power cord and

grounding

Make sure to ground the washing machine to

prevent a short circuit or an electric shock when

plugging in.

Using a 3-prong outlet

Plug in the electrical outlet without additional

grounding.

WARNING

y

The power outlet must be within 60 inches (1.5 m) of

either side of the washer.

y

The appliance and outlet must be positioned so that the

plug is easily accessible.

y

Do not overload the outlet with more than one

appliance.

y

The outlet must be grounded in accordance with

current wiring codes and regulations.

y

Time-delay fuse or circuit breaker is recommended.

y

It is the personal responsibility and obligation of the

product owner to have a proper outlet installed by a

qualified electrician.

y

Do not use a worn or damaged power cord or power

plug. Replace or repair it immediately.

Failure to

do so may result in death, fire, electric shock, or

malfunction.

y

Do not modify the power cord and take care not to

damage it when installing or moving the washing

machine.

Failure to do so may result in death, fire,

electric shock, or malfunction.

y

Make sure that the washing machine is grounded.

y

Connect this washing machine to a grounded outlet

conforming to the rating prior to use.

Failure to do so

may result in fire, electric shock, or malfunction.

y

Do not use adaptors or extension cords.

The washing

machine should always be plugged into its own

individual electrical outlet which has a voltage rating

that matches the rating plate. Failure to do so may

result in fire, electric shock or disorder.

y

Do not damage or cut off the ground prong of the

power cord.

Doing so may cause death, fire, electric

shock, or product malfunction.

Test run

Check if the washing machine is properly installed

and run a test cycle.

1

Load the washing machine with 6 pounds of

laundry.

2

Press

A

.

3

Press to RINSE + SPIN.

4

Press

C

.

- The wash cycle starts.

5

Check if water is supplied, that the washing

machine does not rock or vibrates excessively,

and that it drains well during the spin cycle.

- If water leaks during water supply, see page

14,

Connecting the water lines

to connect them

properly.

- If the washing machine rocks and vibrates

excessively, see page 16,

Leveling the washing

machine

to level it again.

- If the drain does not work, see page 15,

Connecting the drain line

to install it properly.

18

PREPARATION

u Check all pockets to make sure that they are

empty.

- Items such as clips, matches, pens, coins, and

keys can damage both your washer and your

clothes.

u Close zippers, hooks, and drawstrings to prevent

these items from snagging or tangling on other

clothes.

u Pretreat heavily stained areas before washing.

- Doing so will produce clean, stain-free results.

u Combine large and small items in a load. Load

large items first.

u Large items should not be more than half of the

total washload.

u The washer can be fully loaded, but the drum

should not be tightly packed with items.

-The door of the washer should close easily.

u Do not wash single items, except for bulky items

such as blankets. Make sure to wash laundry in

similar types of loads.

- Washing a single small item may result in the tub

becoming unbalanced, vibrating and making a

noise.

u Do not wash waterproof clothes.

- This may cause abnormal vibration, or may

cause the load to bounce, which could damage

the tub.

u Check if there are any other foreign objects in the

door seal and take extra care that clothes do not

get caught there.

- Foreign objects in the door seal may stain

clothes, and water may leak if clothes get caught

in the door seal.

u Wash underwear or small, light items in a laundry

net.

- Small, light items may get caught in the door

seal, and a brassiere hook may damage other

items or the tub.

u Brush heavy soil, dust, or hair off fabrics before

washing.

- Laundry may not wash clean if there is dirt or

sand on the fabrics, or they may damage due to

particles rubbing against sheer fabrics.

u Wash blankets individually.

- Washing more than one blanket together may

produce unclean results due to tangling or an

unbalanced load.

u Always separate fabrics according to their colors

and wash them separately to prevent colors from

running.

- Fabrics may damage or become stained due to

fabric dyes running, or due to foreign objects

transferring from one fabric to another.

PREPARATION

Sorting wash loads

Precautions for fabric care before wash cycle

Read and observe the following to prevent shrinkage or damage to clothes.

19

ENGLISH

PREPARATION

Category Label Directions

Washing

Hand Wash

Machine Wash, Normal Cycle

Use Permanent Press/Wrinkle

Resistant washing machine

setting (which has a cool

down or

cold spray before the reduced

spin)

Use Gentle/Delicate washing

machine setting (slow

agitation and/ or reduced

wash time).

Do Not Wash

Do Not Wring

Water Temperature

Hot

Warm

Cold/Cool

Bleach symbols

Any Bleach (When Needed)

Only Non-Chlorine Bleach

(When Needed)

Do Not Bleach

Colors

Whites / Lights / Darks

Soil

Heavy / Normal / Light

Fabric

Delicates / Easy Care / Sturdy Cottons

Lint

Lint Producers / Lint Collectors

Fabric care labels

Most articles of clothing feature fabric care labels

that include instructions for proper care.

Sorting laundry

It is recommended that you sort laundry into similar

loads that are washable in the same cycle.

Refer to the following chart for sorting clothes

20

PREPARATION

Loading the dispenser

The detergent dispenser drawer of the washing

machine has a dispenser compartment for each

detergent type. Add each detergent to its appropriate

compartment.

1

Pull out the detergent dispenser drawer.

2

Add the appropriate detergent to its appropriate

compartment.

- If you use a liquid detergent, check if the liquid

detergent cup is in place.

- If you use a powdered detergent, remove the

liquid detergent cup and put the powder in the

main wash detergent compartment.

Liquid chlorine

bleach

compartment

Liquid

detergent

Cup

Main wash

detergent

compartment

Pre-wash

detergent

compartment

Liquid fabric

softener

compartment

3

Close the detergent dispenser drawer slowly.

- Slamming the detergent dispenser drawer may

result in the detergent overflowing into another

compartment or pouring into the tub earlier than

programmed.

NOTE

y

It is normal for a small amount of water to

remain in the dispenser compartments at the

end of the cycle.

Using detergent/fabric softener

Recommended detergent

Make sure to use HE (High-Efficiency) detergent

for front-loading washing machines. HE detergents

dissolve more efficiently and produce fewer suds to

ensure efficient washing and rinsing. Use the correct

amount of detergent as indicated on the label of the

detergent packaging.

Designed specially to use only

HE (High-Efficiency) detergent

NOTE

y

Only use HE detergents, since using a regular

detergent may produce excessive suds.

y

HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of

your washer clean.

y

Use less detergent for soft water.

y

Wipe up any spills immediately, as liquids could

damage the finish and the control panel of the

washing machine.

y

Using too much detergent can cause a build-

up in the tub resulting in unsatisfactory

performance and machine malfunction.

y

If you use a detergent that does not dissolve

easily or a detergent with high viscosity, it will

leave a residue on the tub, which may not rinse

properly.

La page est en cours de chargement...

LG WM8000HVA Le manuel du propriétaire

LG WM8000HVA Le manuel du propriétaire

dans d''autres langues

Documents connexes