LG WM8000HVA Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire
OWNER’S MANUAL
WASHING MACHINE
WM8000H*A
www.lg.com
Please read this owner's manual thoroughly before operating and keep it handy
for reference at all times.
MFL67360439
ENGLISH
FRANÇAIS
2
TABLE OF CONTENTS
TABLE OF CONTENTS
3 IMPORTANT SAFETY INSTRUCTIONS
3 BASIC SAFETY PRECAUTIONS
4 GROUNDING INSTRUCTIONS
5 SAFETY INSTRUCTIONS FOR INSTALLATION
6 SAFETY INSTRUCTIONS FOR USE, CARE,
CLEANING, AND DISPOSAL
7 PRODUCT FEATURES
8
INTRODUCING YOUR WASHING MACHINE
8 Parts and Accessories
9 Control panel features
11 INSTALLATION INSTRUCTIONS
11 Preview installation order
12 Checking and choosing the proper location
13 Unpacking and removing shipping bolts
14 Connecting the water lines
15 Connecting the drain line
16 Leveling the washing machine
17 Plugging in the power cord and grounding
17 Test run
18 PREPARATION
18 Sorting wash loads
18 - Precautions for fabric care before wash cycle
19 - Fabric care labels
19 - Sorting laundry
20 Using detergent/fabric softener
20 - Recommended detergent
20 - Loading the dispenser
22 USING YOUR WASHING MACHINE
22 Basic operation
23 Cycle guide
24 Main cycle
24 - Reduce laundry allergen, ALLERGIENE
24 - Reduce laundry bacteria, SANITARY
24 - For white fabrics, BRIGHT WHITES™
24 - Blankets or bulky items, BULKY/LARGE
24 - Normal items, COTTON/NORMAL
24 - Heavily soiled items, HEAVY DUTY
24 - Comforters, JUMBO WASH
24 - Wrinkle free items, PERM. PRESS
24 - Sheer items, DELICATES
24 - For towels, TOWELS
24 - For a few items, SMALL LOAD
24 - Items labeled wool or hand-washable, HAND
WASH/WOOL
24 - Quick wash, SPEED WASH
25 Cycle setting buttons
25 Setting options before cycle
25 - Setting the water temperature, WASH TEMP.
25 - Setting spin speed, SPIN SPEED
25 - Setting soil level of laundry, SOIL LEVEL
26 - Adjusts the melody and button tones, SIGNAL
26 - Prewashing, PRE-WASH
26 - Rinse, drain and spin only, RINSE + SPIN
26 - Drum Lighting, DRUM LIGHT
26 - Tumbling clothes to prevent wrinkles,
FRESH CARE
26 - Adding extra rinse cycle, EXTRA RINSE
27 - Presetting the start time, DELAY WASH
27 - High temperature, STEAM
27 - Saving energy, COLDWASH™
27 - Saving time, TURBOWASH™
28 Setting the options during cycle
28 - Button lock feature, CHILD LOCK
28 - Saving customized wash, PGM SAVE
28 - Selecting your customized cycle, CUSTOM PGM
29 MAINTENANCE
29 Care
29 - Care after wash
29 - Care in cold climates
30 Cleaning
30 - Cleaning the drum, TUB CLEAN
31 - Cleaning the detergent dispenser drawer
32 - Cleaning the water inlet filters
33 - Cleaning the drain pump filter
34 - Cleaning the door seal
35 TROUBLESHOOTING
35 Checking error messages
36 Before calling for service
37 SPECIFICATIONS
38 SMART APPLIANCE CONNECTIVITY
38 USING SMARTDIAGNOSIS™
39 WARRANTY
3
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, injury to persons, or death.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and
obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.
These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, injury to persons, or death.
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a
qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a
qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.
Before use, the washer must be properly installed as
described in this manual.
Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry cleaning solvents, or other flammable or
explosive substances, as they give off vapors that
could ignite or explode.
Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite
or explode.
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washer, turn
on all hot water faucets and let the water flow from
each for several minutes. This will release any
accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame
during this time.
Do not allow children to play on or in the washer.
Close supervision of children is necessary when the
washer is used near children.
Before the washer is removed from service or
discarded, remove the door to prevent children from
climbing inside.
Do not install or store the washer where it will be
exposed to the weather or freezing temperatures.
Do not tamper with controls.
Do not repair or replace any part of the washer or
attempt any servicing other than as described in this
manual. We strongly recommend that any service
be performed by a qualified technician.
See Installation Instructions for grounding
requirements.
ALWAYS follow the fabric care instructions supplied
by the garment manufacturer.
Do not place items exposed to cooking oil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a
load to catch fire.
Use fabric softeners or products to eliminate static
only as recommended by the manufacturer.
This washer is not designed for maritime use or for
mobile installations such as in RVs, aircraft, etc.
Turn off the water faucets and unplug the washer if
the machine is to be left for an extended period of
time, such as during vacations.
Do not use to dry articles containing foam rubber or
similarly textured rubber-like materials.
Packaging material can be dangerous for children.
There is a risk of suffocation! Keep all packaging
from children.
Always check the inside of the washer for foreign
objects before loading laundry. Keep the door closed
when not in use.
Do not reach into the appliance if the tub or agitator is
moving.
WARNING: This product contains chemicals known to
the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after
handling.
5
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures. Installation instructions are
packed with the washer for installer’s reference. If
the washer is moved to a new location, have it
checked and reinstalled by a qualified service tech-
nician. Failure to follow this warning can cause
serious injury, fire, electric shock, or death.
Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord. Failure to
follow this warning can cause serious injury, fire,
electric shock, or death.
For personal safety, this appliance must be properly
grounded. Failure to follow this warning can cause
serious injury, fire, electric shock, or death.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the pos-
sibility of electric shock from this appliance.
This washer must be plugged into a 120 VAC, 60 Hz
grounded outlet. Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly ground-
ed. Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to have
it replaced with a properly grounded 3-prong wall
outlet. Failure to follow this warning can cause
serious injury, fire, electric shock, or death.
Do not install on carpet. Install washer on a solid floor.
Failure to follow this warning can cause serious
leak damage.
Do not remove ground prong. Do not use an adapter
or extension cord. Plug into a grounded 3-prong out-
let. Failure to follow these warnings can cause
serious injury, fire, electric shock, or death.
The washer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best
performance and also prevents overloading house
wiring circuits which could cause a fire hazard from
overheated wires.
Never unplug your washer by pulling on the power
cord. Always grip plug firmly and pull straight out
from the outlet. Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
Repair or immediately replace all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end. Failure to follow this
warning can cause serious injury, fire, electric
shock, or death.
When installing or moving the washer, be careful not
to pinch, crush, or damage the power cord. Failure to
follow this warning can cause serious injury, fire,
electric shock, or death.
The washer must be installed and electrically ground-
ed by a qualified service person in accordance with
local codes to prevent shock hazard and assure
stability during operation.
The washer is heavy. Two or more people may be
needed to install and move the appliance. Failure to
do so can result in back or other injury.
Store and install the washer where it will not be ex-
posed to temperatures below freezing or exposed to
outdoor weather conditions. Failure to follow this
warning can cause serious leak damage.
Do not install the washer in humid spaces to reduce
the risk of electric shock. Failure to follow this warn-
ing can cause serious injury, fire, electric shock, or
death.
To reduce the risk of injury to persons, adhere to all
industry recommended safety procedures including
the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this
manual could result in property damage, injury to
persons or death.
6
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
SAVE THESE INSTRUCTIONS
Unplug the washer before cleaning to avoid the risk
of electric shock.
Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washer. They will damage the
finish.
Do not put oily or greasy rags or clothing on top of the
washer. These substances give off vapors that
could ignite the materials.
Do not wash items that are soiled with vegetable or
cooking oil. These items may contain some oil after
laundering. Due to the remaining oil, the fabric may
smoke or catch fire by itself.
Disconnect this appliance from the power supply
before attempting any user maintenance. Turning the
controls to the OFF position does not disconnect this
appliance from the power supply. Failure to follow
this warning can cause serious injury, fire, electric
shock, or death.
Do not combine laundry products for use in one load
unless specified on the label.
Do not mix chlorine bleach with ammonia or acids
such as vinegar. Follow package directions when
using laundry products. Incorrect usage can produce
poisonous gas, resulting in serious injury or death.
Do not reach into the washer while parts are moving.
Before loading, unloading, or adding items, press the
START/PAUSE button and allow the drum to coast to a
complete stop before reaching inside. Failure to fol-
low this warning can cause serious injury, fire,
electric shock, or death.
Do not allow children to play on or in the washer.
Close supervision of children is necessary when the
washer is used near children. As children grow, teach
them the proper, safe use of all appliances. Failure to
comply with these warnings could result in serious
injury to persons or death.
Destroy the carton, plastic bag, and other packing
materials after the washer is unpacked. Children
might use them for play. Cartons covered with rugs,
bedspreads, or plastic sheets can become airtight
chambers. Failure to comply with these warnings
could result in serious injury to persons or death.
Keep laundry products out of children’s reach. To
prevent injury to persons, observe all warnings on
product labels. Failure to comply with these warn-
ings could result in serious injury to persons or
death..
Remove the door to the washing compartment to
avoid the danger of children or small animals getting
trapped inside before your washer is removed from
service or discarded. Failure to do so can result in
serious injury to persons or death.
Make sure the dispenser drawer is closed at all times
when not being filled with laundry products. Failure to
keep the drawer closed can result in personal injury
or flooding.
7
ENGLISH
PRODUCT FEATURES
PRODUCT FEATURES
INVERTER DIRECT-DRIVE MOTOR
The inverter direct drive motor, which is directly attached to the drum, is capable of producing multiple
distinct different motions for optimal washing performance with very little noise and vibration. The motor
assembly also contains fewer moving parts, thus resulting in fewer repairs.
SMARTDIAGNOSIS™
Should you experience any technical difficulty with your washing machine, it has the capability of
transmitting data by phone to the Customer Information Center. The call center agent records the data
transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis
(Refer to page 38).
TUB CLEAN
Regular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and fresh.
MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air
circulation and allow the interior of the machine to dry. To use this feature, after the load has been removed,
do not close the door completely.
When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door
slightly open allowing the interior of the washer to dry.
LARGE CAPACITY STAINLESS STEEL DRUM
The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow
easier access for large items.
CHILD LOCK
Use this option to disable the controls during a wash cycle. This option can prevent children from changing
cycles or operating the machine.
DETERGENT DISPENSER DRAWER
The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, the main laundry
detergent, liquid bleach, and fabric softener into different compartments.
HIGH TEMPERATURE STEAM CYCLES
During LG's unique high-temperature steam cycles, the hot steam helps to remove tough stains.
8
INTRODUCING YOUR WASHING MACHINE
NOTE
y
Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing.
y
For your safety and for extended product life, use only authorized components. The manufacturer is not
responsible for product malfunction or accidents caused by the use of separately purchased unauthorized
components or parts.
y
The images in this guide may be different from the actual components and accessories, and are subject to
change by the manufacturer without prior notice for product improvement purposes.
INTRODUCING YOUR WASHING MACHINE
Parts and Accessories
Parts
Pedestal
(sold separately)
Stacking Kit
(sold separately)
Accessories
Hot/cold water hoses Non-skid pads
Caps for covering
shipping bolt holes
Wrench Tie strap Elbow bracket
(for securing drain hose)
Detergent
dispenser
drawer
(See page 20)
Door
Magnetic Door
Plunger
(see page 3)
Control panel
(See page 9)
Door
seal
Water
circulation
and steam
nozzles
Tub
Leveling
feet
Drain pump filter cover
Drain pump filter
Drain hose
Water inlets
Shipping
bolts
Power cord
Drain hose
Included Accessories Optional Accessories
9
ENGLISH
INTRODUCING YOUR WASHING MACHINE
Button Description
y
Turns the washing machine on and off.
y
(During the wash cycle) stops operation, and cancels the settings.
y
ALLERGIENE™
- For cotton, underwear (see page 24)
y
SANITARY
- For underwear, diapers, etc. (see page 24)
y
BRIGHT WHITES™
- For white fabrics (see page 24)
y
BULKY/LARGE
- For blankets or large bulky items (see page 24)
y
HEAVY DUTY
- For heavily soiled cotton fabric (see page 24)
y
COTTON/NORMAL
- For general laundry, such as cotton T-shirts or towels (see page 24)
y
JUMBO WASH
- For blankets or king size items (see page 24)
y
TOWELS
- For towels (see page 24)
y
PERM. PRESS
- For wrinkle-free fabrics (see page 24)
y
HAND WASH/WOOL
- For wool or hand-wash fabrics (see page 24)
y
DELICATES
- For sheer and delicate fabrics (see page 24)
y
SPEED WASH
- For small quantities of lightly soiled items (see page 24)
y
SMALL LOAD
- For few items (see page 24)
y
TUB CLEAN
- For tub clean (see page 30)
y
Starts or pauses the washing machine cycle.
- If you do not press the
C
button within 4 minutes of selecting a cycle, the washing
machine will turn off automatically.
y
(Press repeatedly) Selects the water temperature for the wash cycle (see page 25).
- Select water temperature from 5 settings.
y
(Press repeatedly) Selects the spin speed in the desired level (see page 25).
- Selects spin speed from 5 settings.
y
(Press repeatedly) Selects a wash cycle by soil level (see page 25).
- Selects soil level from 5 settings.
y
(Press repeatedly) Selects a Melody or Button sound by signal(see page 26).
Control panel features
Operation
Operation
Display
Cycle selector
Soil
Level
Selection
Button
Signal
Sound
Selection
Button
Spin
Speed
Selection
Button
Water
Temperature
Selection
Button
Start/
Pause
Button
Power
Button
10
INTRODUCING YOUR WASHING MACHINE
Display
Operation (continued)
Button Description
y
(Press before starting wash cycle) Use this option for extra cleaning power (See page. 27).
y
(Press and hold 3 seconds) Tumbles clothes to prevent wrinkle (See page. 26).
y
Use this option to save time. (See page.27).
y
Use this option to save your energy consumption (See page. 27).
y
(Press before wash cycle) Use this option to rinse detergent from load (See page. 26).
y
(Pres and hold during wash cycle) Lock/unlock the button (See page. 28).
y
Set delay time of starting cycle (See page. 27).
y
(Press before wash cycle) Add an extra rinse to the selected cycle. (See page. 26).
y
(Pres and hold during wash cycle) The drum is equipped with a white LED light that
illuminates when the washer is turned on (See page 26)
y
Use this option to save special combination of settings that you use frequently
(See page. 28).
y
Pre-wash heavily soiled laundry (See page. 26).
Display Icon Description
y
This portion of the display shows which stage of the wash cycle is currently
underway (LOAD SENSING, WASH, RINSE or SPIN).
y
Indicates that the door is locked. The washer door will lock while the washer is operating.
The door can be unlocked by pressing the START/ PAUSE button to stop the washer.
y
This indicator shows that the washer has been set for DELAY WASH. The washer
will start automatically after the set delay time has passed.
y
When the START/PAUSE button is pressed, the washer automatically detects the wash
load (weight) and optimizes the washing time, based on the selected cycle and options.
The display will then indicate the estimated time remaining for the selected wash cycle.
Door lock
indicator
Estimated time remaining/
error message display
(See page 35)
Cycle
process
indicator
Delay
wash
indicator
11
ENGLISH
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Preview installation order
WARNING
y
Washer is heavy! Two or more people are required when moving and unpacking the washer.
Failure to do so
can result in back or other injury.
y
Store and install the washer where it will not be exposed to temperatures below freezing or exposed to
outdoor weather conditions.
Failure to follow this warning can cause serious injury, fire, electric shock, or
death.
y
Properly ground washer to conform with all governing codes and ordinances.
Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
y
To reduce the risk of electric shock, do not install the washer in humid spaces.
Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
y
The base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor.
y
Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Checking and choosing
the proper location
Unpacking and
removing shipping bolts
Connecting the water line
Connecting the drain line
Leveling the washing
machine
Plugging in the power
cord and grounding
Test run
12
INSTALLATION INSTRUCTIONS
Checking and choosing the proper
location
Install the washing machine on a solid floor that is
strong and rigid enough to support the weight of the
washing machine, even when fully loaded, without
flexing or bouncing. If the floor has too much flex,
you may need to reinforce it to make it more rigid. If
the floor is not solid, it may cause severe vibration
and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth ground.
2
Two or more people are needed for moving and
unpacking the washing machine.
3
Allow for sufficient space between the walls and
the washing machine for installation.
Space requirements
You must allow sufficient space for water lines, the
drain line, and airflow.
NOTE
y
Be sure to allow for wall, door, or floor moldings
that may increase the required clearances.
Clearances
4"
(10 cm)
33.1"
(84 cm)
57.9"
(147 cm)
24.8"
(63cm)
29"
73.6 cm
1"
(2.5 cm)
1"
(2.5 cm)
24 in.
2*
(155 cm
2
)
18" min.*
(45.7 cm)
1"*
(2.5 cm)
33.1"
(84 cm)
5"**
(12.7 cm)
48 in.
2*
(310 cm
2
)
14" max.*
(35.6 cm)
3"
*
(7.6 cm)
3"
*
(7.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
1"*
(2.5 cm)
5"**
(12.7 cm)
14" max.*
(35.6 cm)
18" min.*
(45.7 cm)
0"
(0 cm)
40.8"
(103.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
33.1"
(84 cm)
24 in.
2*
(155 cm
2
)
18" min.*
(45.7 cm)
1"*
(2.5 cm)
33.1"
(84 cm)
5"**
(12.7 cm)
48 in.
2*
(310 cm
2
)
14" max.*
(35.6 cm)
3"
*
(7.6 cm)
3"
*
(7.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
1"*
(2.5 cm)
5"**
(12.7 cm)
14" max.*
(35.6 cm)
18" min.*
(45.7 cm)
0"
(0 cm)
40.8"
(103.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
33.1"
(84 cm)
24 in.
2*
(155 cm
2
)
18" min.*
(45.7 cm)
1"*
(2.5 cm)
33.1"
(84 cm)
5"**
(12.7 cm)
48 in.
2*
(310 cm
2
)
14" max.*
(35.6 cm)
3"
*
(7.6 cm)
3"
*
(7.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
1"*
(2.5 cm)
5"**
(12.7 cm)
14" max.*
(35.6 cm)
18" min.*
(45.7 cm)
0"
(0 cm)
40.8"
(103.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
33.1"
(84 cm)
24 in.
2*
(155 cm
2
)
18" min.*
(45.7 cm)
1"*
(2.5 cm)
33.1"
(84 cm)
5"**
(12.7 cm)
48 in.
2*
(310 cm
2
)
14" max.*
(35.6 cm)
3"
*
(7.6 cm)
3"
*
(7.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
1"*
(2.5 cm)
5"**
(12.7 cm)
14" max.*
(35.6 cm)
18" min.*
(45.7 cm)
0"
(0 cm)
40.8"
(103.6 cm)
1"
(2.5 cm)
29"
(73.6 cm)
1"
(2.5 cm)
33.1"
(84 cm)
13
ENGLISH
INSTALLATION INSTRUCTIONS
Unpacking and removing shipping bolts
When removing the washer from the carton base, be
sure to remove the foam drum support in the middle of
the carton base.
If you must lay the washer down to remove the base
packaging materials, always lay it carefully on its
side.
Do NOT lay the washer on its front or back.
1
Starting with the bottom two shipping bolts,
use the wrench (included) to fully loosen all four
shipping bolts by turning them counterclockwise.
Remove the bolt assemblies by wiggling them
slightly while pulling them out.
Shipping
bolt
Retainer
2
Locate the four hole caps included in the
accessory pack and install them in the shipping
bolt holes.
Cap
NOTE
y
Save the bolt assemblies for future use. To
prevent damage to internal components, DO
NOT transport the washer without reinstalling
the shipping bolts.
y
Failure to remove shipping bolts and retainers
may cause severe vibration and noise, which
can lead to permanent damage to the washer.
The cord is secured to the back of the washer
with a shipping bolt to help prevent operation
with shipping bolts in place.
NOTE
y
The floor must be strong and rigid enough to
support the weight of the washer, when fully
loaded, without flexing or bouncing. If your floor
has too much flex, you may need to reinforce it
to make it more rigid. A floor that is adequate
for a top-loading washer may not be rigid
enough for a front loading washer, due to the
difference in the spin speed and direction. If the
floor is not solid, your washer may vibrate and
you may hear and feel the vibration throughout
your house.
y
Before installing the washer, make sure the floor
is clean, dry and free of dust, dirt, water and oils
so the washer feet can not slide easily. Leveling
feet that can move or slide on the floor can
contribute to excess vibration and noise due to
poor contact with the floor.
y
If a drip pan must be used, take extra care
to follow the instructions provided with the
drip pan and make sure the leveling feet are
adjusted for firm and even contact with the pan.
Use of drip pans and failure to properly level the
machine may result in increased vibration and
noise during operation.
Installing on a pedestal or stacking kit
33.1"
(84 cm)
4"
(10 cm)
29"
(73.7cm)
1"
(2.5 cm)
1"
(2.5 cm)
81.61"
(207.3 cm)
NOTE
y
Refer to the instructions packaged with the
optional PEDESTAL or STACKING KIT before
installing with a PEDESTAL or a STACKING KIT.
14
INSTALLATION INSTRUCTIONS
Connecting the water lines
1
Check the rubber seals on both sides of the hose.
- Insert a rubber seal into the threaded fittings on
each hose to prevent leaking.
Rubber seal
Water hose
(To water inlet on the
washing machine)
Rubber seal
Water hose
(To faucet)
2
Connect the water supply hoses to the HOT and
COLD water faucets tightly by hand and then
tighten another 2/3 turn with pliers.
- Connect the blue hose to a cold water faucet and
the red hose to a hot water faucet.
WARNING
y
Do not overtighten.
Damage to the coupling can
result.
3
After connecting inlet hose to water faucets,
turn on the water faucets to flush out foreign
substances (dirt, sand or sawdust) in the water
lines. Let water drain into a bucket, and check the
water temperature.
4
Connect the hoses to the water inlets tightly
by hand and then tighten another 2/3 turn with
pliers.
- Connect the blue hose to the cold water inlet
and the red hose to the hot water inlet.
Cold
water
inlet
Hot water
inlet
WARNING
y
Do not overtighten the hoses.
Overtightening
can damage the valves resulting in leaking and
property damage.
5
Check for leaks by turning on the faucets.
- If water leaks, check steps 1 to 4 again.
NOTE
y
For your safety, and for extended product
life, use only authorized components. The
manufacturer is not responsible for product
malfunction or accidents caused by the use of
separately purchased unauthorized parts.
y
Use new hoses when you install the washing
machine. Do not reuse old hoses. Use only the
inlet hoses provided with the washer. LG does
not recommend the use of aftermarket hoses.
y
Periodically check the hoses for cracks, leaks
and wear, and replace the hoses every 5 years.
y
Do not stretch the water hoses intentionally,
and make sure that they are not crushed by
other objects.
y
Water supply pressure must be between 20 psi
and 120 psi (138–827 kPa). If the water supply
pressure is more than 120 psi, a pressure
reducing valve must be installed.
y
To provide optimum washing performance the
hot water temperature should be set at 120-
135°F (48-57°C) and the cold at 60°F (15°C).
15
ENGLISH
INSTALLATION INSTRUCTIONS
Connecting the drain line
Secure the drain hose in place to prevent moving
and leaking.
NOTE
y
The drain hose should be properly secured.
Failure to properly secure the drain hose can
result in flooding and malfunction.
y
Total height of the house end should not exceed
96 inches (244.8 cm) from the bottom of the
washer.
y
The drain must be installed in accordance with
any applicable local codes and regulations.
y
Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
Using a standpipe
1
Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10
cm) from the end of the drain hose. If the drain
hose is extended more than 4 inches (10 cm)
beyond the end of the elbow bracket, mold or
microorganisms could spread to the inside of
the washer.
No more than
4 inches (10 cm)
Elbow bracket
2
Insert the end of the drain hose into the standpipe.
Drain Hose
Elbow Bracket
3
Use a tie strap to secure the drain hose in place.
Using a laundry tub
1
Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10
cm) from the end of the drain hose. If the drain
hose is extended more than 4 inches (10 cm)
beyond the end of the elbow bracket, mold, or
microorganisms could spread to the inside of
the washer.
No more than
4 inches (10 cm)
Elbow bracket
2
Hang the end of the drain hose over the side of
the laundry tub.
Elbow Bracket
Drain Hose
3
Use a tie strap to secure the drain hose in place.
16
INSTALLATION INSTRUCTIONS
Leveling the washing machine
The washer tub of your new washing machine
spins at very high speeds. To minimize vibration,
noise, and unwanted movement, the floor must be
perfectly level and solid.
1
Check the washing machine’s level.
- Check the precise level by rocking the top edges
of the washing machine or placing a level on
the washing machine. The slope beneath the
washing machine must not exceed 1°, and all
four leveling feet must rest firmly on the floor.
Level
2
Turn the lower leveling feet clockwise to level the
washing machine.
- Turning the lower leveling feet clockwise raises
the washing machine.
Raise
3
Turn the locknuts counterclockwise and tighten
them when the washing machine is level.
Tighten all 4 lock
nuts securely using
the wrench.
4
Check the washing machine’s level again.
- Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock.
- If the washing machine rocks, repeat steps 1 to 3.
WARNING
y
Using the washing machine without leveling,
it may result in malfunction caused by the
production of excess vibration and noise.
y
If you are installing the washing machine on the
optional pedestal, you must adjust the leveling
feet on the pedestal to level the washing
machine. The washing machine´s leveling feet
should be minimized and turn the locknuts
counterclockwise to secure.
y
Use the leveling feet only when you level the
washing machine.
If you raise the leveling feet
unnecessarily, it may cause abnormal vibration
of the washing machine.
Using non-skid pads (optional)
If you install the washing machine on a slippery
surface, it may move because of excessive vibration.
Incorrect leveling may cause malfunction through
noise and vibration. In the event of this, lay the non-
skid pads under the leveling feet and adjust the level.
1
Clean the floor to attach the non-skid pads.
- Use a dry rag to remove and clean foreign
objects or moisture. If moisture remains, the
non-skid pads may slip.
2
Adjust the level after placing the washing machine
in the installation area.
3
Place the adhesive side of the non-skid pad on the
floor.
- It is most effective to install the non-skid pads
under the front legs. If it is hard to place the pads
under the front legs, place them under the back
legs.
Remove
backing
This side up
Adhesive
side
4
Check the washing machine’s level again.
- Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock. If the washing machine
rocks, level the washing machine again.
17
ENGLISH
INSTALLATION INSTRUCTIONS
Plugging in the power cord and
grounding
Make sure to ground the washing machine to
prevent a short circuit or an electric shock when
plugging in.
Using a 3-prong outlet
Plug in the electrical outlet without additional
grounding.
WARNING
y
The power outlet must be within 60 inches (1.5 m) of
either side of the washer.
y
The appliance and outlet must be positioned so that the
plug is easily accessible.
y
Do not overload the outlet with more than one
appliance.
y
The outlet must be grounded in accordance with
current wiring codes and regulations.
y
Time-delay fuse or circuit breaker is recommended.
y
It is the personal responsibility and obligation of the
product owner to have a proper outlet installed by a
qualified electrician.
y
Do not use a worn or damaged power cord or power
plug. Replace or repair it immediately.
Failure to
do so may result in death, fire, electric shock, or
malfunction.
y
Do not modify the power cord and take care not to
damage it when installing or moving the washing
machine.
Failure to do so may result in death, fire,
electric shock, or malfunction.
y
Make sure that the washing machine is grounded.
y
Connect this washing machine to a grounded outlet
conforming to the rating prior to use.
Failure to do so
may result in fire, electric shock, or malfunction.
y
Do not use adaptors or extension cords.
The washing
machine should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. Failure to do so may
result in fire, electric shock or disorder.
y
Do not damage or cut off the ground prong of the
power cord.
Doing so may cause death, fire, electric
shock, or product malfunction.
Test run
Check if the washing machine is properly installed
and run a test cycle.
1
Load the washing machine with 6 pounds of
laundry.
2
Press
A
.
3
Press to RINSE + SPIN.
4
Press
C
.
- The wash cycle starts.
5
Check if water is supplied, that the washing
machine does not rock or vibrates excessively,
and that it drains well during the spin cycle.
- If water leaks during water supply, see page
14,
Connecting the water lines
to connect them
properly.
- If the washing machine rocks and vibrates
excessively, see page 16,
Leveling the washing
machine
to level it again.
- If the drain does not work, see page 15,
Connecting the drain line
to install it properly.
18
PREPARATION
u Check all pockets to make sure that they are
empty.
- Items such as clips, matches, pens, coins, and
keys can damage both your washer and your
clothes.
u Close zippers, hooks, and drawstrings to prevent
these items from snagging or tangling on other
clothes.
u Pretreat heavily stained areas before washing.
- Doing so will produce clean, stain-free results.
u Combine large and small items in a load. Load
large items first.
u Large items should not be more than half of the
total washload.
u The washer can be fully loaded, but the drum
should not be tightly packed with items.
-The door of the washer should close easily.
u Do not wash single items, except for bulky items
such as blankets. Make sure to wash laundry in
similar types of loads.
- Washing a single small item may result in the tub
becoming unbalanced, vibrating and making a
noise.
u Do not wash waterproof clothes.
- This may cause abnormal vibration, or may
cause the load to bounce, which could damage
the tub.
u Check if there are any other foreign objects in the
door seal and take extra care that clothes do not
get caught there.
- Foreign objects in the door seal may stain
clothes, and water may leak if clothes get caught
in the door seal.
u Wash underwear or small, light items in a laundry
net.
- Small, light items may get caught in the door
seal, and a brassiere hook may damage other
items or the tub.
u Brush heavy soil, dust, or hair off fabrics before
washing.
- Laundry may not wash clean if there is dirt or
sand on the fabrics, or they may damage due to
particles rubbing against sheer fabrics.
u Wash blankets individually.
- Washing more than one blanket together may
produce unclean results due to tangling or an
unbalanced load.
u Always separate fabrics according to their colors
and wash them separately to prevent colors from
running.
- Fabrics may damage or become stained due to
fabric dyes running, or due to foreign objects
transferring from one fabric to another.
PREPARATION
Sorting wash loads
Precautions for fabric care before wash cycle
Read and observe the following to prevent shrinkage or damage to clothes.
19
ENGLISH
PREPARATION
Category Label Directions
Washing
Hand Wash
Machine Wash, Normal Cycle
Use Permanent Press/Wrinkle
Resistant washing machine
setting (which has a cool
down or
cold spray before the reduced
spin)
Use Gentle/Delicate washing
machine setting (slow
agitation and/ or reduced
wash time).
Do Not Wash
Do Not Wring
Water Temperature
Hot
Warm
Cold/Cool
Bleach symbols
Any Bleach (When Needed)
Only Non-Chlorine Bleach
(When Needed)
Do Not Bleach
Colors
Whites / Lights / Darks
Soil
Heavy / Normal / Light
Fabric
Delicates / Easy Care / Sturdy Cottons
Lint
Lint Producers / Lint Collectors
Fabric care labels
Most articles of clothing feature fabric care labels
that include instructions for proper care.
Sorting laundry
It is recommended that you sort laundry into similar
loads that are washable in the same cycle.
Refer to the following chart for sorting clothes
20
PREPARATION
Loading the dispenser
The detergent dispenser drawer of the washing
machine has a dispenser compartment for each
detergent type. Add each detergent to its appropriate
compartment.
1
Pull out the detergent dispenser drawer.
2
Add the appropriate detergent to its appropriate
compartment.
- If you use a liquid detergent, check if the liquid
detergent cup is in place.
- If you use a powdered detergent, remove the
liquid detergent cup and put the powder in the
main wash detergent compartment.
Liquid chlorine
bleach
compartment
Liquid
detergent
Cup
Main wash
detergent
compartment
Pre-wash
detergent
compartment
Liquid fabric
softener
compartment
3
Close the detergent dispenser drawer slowly.
- Slamming the detergent dispenser drawer may
result in the detergent overflowing into another
compartment or pouring into the tub earlier than
programmed.
NOTE
y
It is normal for a small amount of water to
remain in the dispenser compartments at the
end of the cycle.
Using detergent/fabric softener
Recommended detergent
Make sure to use HE (High-Efficiency) detergent
for front-loading washing machines. HE detergents
dissolve more efficiently and produce fewer suds to
ensure efficient washing and rinsing. Use the correct
amount of detergent as indicated on the label of the
detergent packaging.
Designed specially to use only
HE (High-Efficiency) detergent
NOTE
y
Only use HE detergents, since using a regular
detergent may produce excessive suds.
y
HE detergents produce fewer suds, dissolve
more efficiently to improve washing and rinsing
performance, and help to keep the interior of
your washer clean.
y
Use less detergent for soft water.
y
Wipe up any spills immediately, as liquids could
damage the finish and the control panel of the
washing machine.
y
Using too much detergent can cause a build-
up in the tub resulting in unsatisfactory
performance and machine malfunction.
y
If you use a detergent that does not dissolve
easily or a detergent with high viscosity, it will
leave a residue on the tub, which may not rinse
properly.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

LG WM8000HVA Le manuel du propriétaire

Catégorie
Machines à laver
Taper
Le manuel du propriétaire

dans d''autres langues