CHAUVET DJ VIVID 4 LED Video Panel Display – 4 Pack Manuel utilisateur

User Manual

Table of Contents

Vivid 4 X4 User Manual Rev. 4

i

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Text Conventions .......................................................................................... 1

Symbols ........................................................................................................ 1

Disclaimer ..................................................................................................... 1

LIMITED WARRANTY ................................................................................................... 1

Intellectual Property ...................................................................................... 2

Safety Notes.................................................................................................. 2

FCC Compliance............................................................................................................ 2

2. Introduction ................................................................................ 3

Product Description....................................................................................... 3

Features......................................................................................................................... 3

Additional Products ........................................................................................................ 3

Optional Accessories ..................................................................................................... 3

Available Signal and Power Cables ............................................................................... 3

Product Overview.......................................................................................... 4

Pixels per Panel ............................................................................................ 5

Product Dimensions...................................................................................... 6

3. Setup ........................................................................................... 7

AC Power...................................................................................................... 7

AC Plug.......................................................................................................................... 7

Power Linking................................................................................................................. 7

4. Mounting ..................................................................................... 8

Orientation..................................................................................................... 8

Mounting Points ............................................................................................ 8

RB-F50CM Rig Bar Dimensions ................................................................... 9

RB-F100CM Rig Bar Dimensions ................................................................. 9

Rig Bar/Panel Assembly ............................................................................... 10

Alternative Rig Bar/Panel Assembly .............................................................................. 11

Mounting to Truss with Chauvet CT-APP ..................................................... 11

Truss Installation........................................................................................... 12

5. Creating a Modular Design........................................................ 13

Vertically Joining the Panels ......................................................................... 13

Vertical Panel Connection.............................................................................................. 14

Horizontally Joining the Panels..................................................................... 15

Horizontal Panel Connection.......................................................................................... 15

6. Connecting and Cabling............................................................ 16

Testing Signal and Power Connections ........................................................ 16

Using the Vivid 4 Test Button........................................................................ 16

Connecting Power and Signal Cables........................................................... 17

Connecting the Signal Between Joined Panels ............................................................. 17

Connecting the Power Between Joined Panels ............................................................. 18

7. LED Module Care and Replacement......................................... 19

Vivid 4 Module............................................................................................... 19

LED Lot Numbers........................................................................................................... 19

A and B Modules............................................................................................................ 19

Vivid 4 LED Module Removal ........................................................................................ 20

8. Panel Configuration ................................................................... 21

Removing and Installing the Handles............................................................ 21

Vivid 4 X4 User Manual Rev. 4

Table of Contents

ii

Accessing the Service Module...................................................................... 21

9. Typical Installation..................................................................... 22

10. Operation .................................................................................. 23

Additional Hardware and Software................................................................ 23

About NovaLCT-Mars ................................................................................... 23

Description ..................................................................................................................... 23

11. Technical Information .............................................................. 24

Vivid 4 Maintenance...................................................................................... 24

Returns.......................................................................................................... 24

12. Technical Specifications ......................................................... 25

1. Antes de empezar....................................................................... 26

Qué va incluido ............................................................................................. 26

Reclamaciones.............................................................................................. 26

Convenciones del manual............................................................................. 26

Símbolos ....................................................................................................... 26

Exención de responsabilidad ........................................................................ 26

GARANTÍA LIMITADA ................................................................................................... 26

Propiedad intelectual..................................................................................... 27

Notas de seguridad....................................................................................... 27

Cumplimiento de la FCC ................................................................................................ 27

2. Introducción................................................................................ 29

Descripción del producto............................................................................... 29

Características ............................................................................................................... 29

Productos adicionales .................................................................................................... 29

Accesorios opcionales ................................................................................................... 29

Cables de alimentación y señal disponibles .................................................................. 29

Vista general del producto ............................................................................ 30

Píxeles por panel .......................................................................................... 31

Dimensiones del producto............................................................................. 32

3. Instalación................................................................................... 33

Corriente alterna ........................................................................................... 33

Enchufe CA.................................................................................................................... 33

Alimentación en cadena................................................................................................. 33

4. Montaje........................................................................................ 34

Orientación.................................................................................................... 34

Puntos de montaje ........................................................................................ 34

Dimensiones de la Rig Bar RB-F50CM......................................................... 35

Dimensiones de la Rig Bar RB-F100CM....................................................... 35

Rig Bar/Ensamblaje del panel....................................................................... 36

Rig Bar/Ensamblaje alternativo del panel ...................................................................... 37

Montaje en truss con Chauvet CT-APP ........................................................ 37

Instalación de truss ....................................................................................... 38

5. Creación de un diseño modular................................................ 39

Unir los paneles verticalmente...................................................................... 39

Conexión del panel vertical ............................................................................................ 40

Unir los paneles horizontalmente.................................................................. 41

Conexión del panel horizontal........................................................................................ 41

6. Conectar (cablear) todos los Vivid 4 ........................................ 42

Probar la señal y las conexiones de alimentación ........................................ 42

Utilizar el botón de prueba del Vivid 4........................................................... 42

Conectar los cables de alimentación y señal................................................ 43

Table of Contents

Vivid 4 X4 User Manual Rev. 4

iii

Conectar la señal entre paneles unidos......................................................................... 43

Conectar la alimentación entre paneles unidos ............................................................. 44

7. Cuidados y sustitución del módulo LED ................................. 45

Módulo LED del Vivid 4................................................................................. 45

Números de lote LED..................................................................................................... 45

Módulos A y B................................................................................................................ 45

Quitar el módulo LED del Vivid 4 ................................................................................... 46

8. Configuración del panel ............................................................ 47

Quitar y instalar los asas............................................................................... 47

Acceso al módulo de servicio........................................................................ 47

9. Instalación típica ........................................................................ 48

10. Funcionamiento........................................................................ 49

Hardware y software adicional...................................................................... 49

Acerca de NovaLCT-Mars............................................................................. 49

Descripción .................................................................................................................... 49

11. Información técnica ................................................................. 50

Mantenimiento del Vivid 4............................................................................. 50

Devoluciones................................................................................................. 50

12. Especificaciones técnicas....................................................... 51

1. Avant de commencer................................................................. 52

Contenu......................................................................................................... 52

Réclamations ................................................................................................ 52

Conventions manuelles................................................................................. 52

Symboles ...................................................................................................... 52

Clause de Non-Responsabilité...................................................................... 52

GARANTIE LIMITÉE...................................................................................................... 52

Propriété intellectuelle................................................................................... 53

Consignes de Sécurité.................................................................................. 53

Conformité FCC ............................................................................................................. 53

2. Introduction ................................................................................ 55

Description de l'appareil................................................................................ 55

Caractéristiques ............................................................................................................. 55

Appareils supplémentaires............................................................................................. 55

Accessoires optionnels .................................................................................................. 55

Câbles de signal et d'alimentation disponibles .............................................................. 55

Vue d'ensemble de l'appareil ........................................................................ 56

Pixels par panneau ....................................................................................... 57

Dimensions de l'appareil ............................................................................... 58

3. Installation .................................................................................. 59

Alimentation CA ............................................................................................ 59

Prise CA......................................................................................................................... 59

Chaînage électrique....................................................................................................... 59

4. Fixation........................................................................................ 60

Orientation..................................................................................................... 60

Points de fixation........................................................................................... 60

Dimensions de la Rig Bar RB-F50CM........................................................... 61

Dimensions de la Rig Bar RB-F100CM......................................................... 61

Assemblage de la Rig Bar et du panneau..................................................... 62

Autre assemblage de la Rig Bar et du panneau ............................................................ 63

Montage sur pont Truss avec pince Chauvet CT-APP ................................. 63

Installation sur treillis..................................................................................... 64

Vivid 4 X4 User Manual Rev. 4

Table of Contents

iv

5. Création d'une configuration modulaire .................................. 65

Assemblage vertical des panneaux .............................................................. 65

Connexion verticale des panneaux ................................................................................ 66

Assemblage horizontal des panneaux .......................................................... 67

Connexion horizontale des panneaux............................................................................ 68

6. Connexion et câblage ................................................................ 69

Test des connexions de signal et d'alimentation........................................... 69

Utilisation du bouton Test du Vivid 4............................................................. 69

Connexion des câbles d'alimentation et de signal ........................................ 70

Connexion du signal entre des panneaux assemblés.................................................... 70

Connexion de l'alimentation entre des panneaux assemblés ........................................ 71

7. Entretien des modules LED....................................................... 72

Module LED Vivid 4....................................................................................... 72

Numéros de lot LED....................................................................................................... 72

Modules A et B............................................................................................................... 72

Dépose de module LED du Vivid 4 ................................................................................ 73

8. Configuration du panneau......................................................... 74

Retrait et installation des poignées ............................................................... 74

Accès au module de service. ........................................................................ 74

9. Installation type.......................................................................... 75

10. Utilisation.................................................................................. 76

Matériel et logiciel additionnels ..................................................................... 76

A propos du NovaLCT-Mars ......................................................................... 76

Description ..................................................................................................................... 76

11. Informations techniques.......................................................... 77

Entretien du Vivid 4....................................................................................... 77

Renvois ......................................................................................................... 77

12. Spécifications techniques....................................................... 78

1. Erste Schritte.............................................................................. 79

Packungsinhalt.............................................................................................. 79

Schadensmeldung ........................................................................................ 79

Textkonventionen.......................................................................................... 79

Symbole ........................................................................................................ 79

Haftungsausschluss...................................................................................... 79

EINGESCHRÄNKTE GARANTIE .................................................................................. 79

Geistiges Eigentum....................................................................................... 80

Sicherheitshinweise ...................................................................................... 80

FCC-Konformität ............................................................................................................ 80

2. Einleitung.................................................................................... 82

Produktbeschreibung .................................................................................... 82

Eigenschaften ................................................................................................................ 82

Zusätzliche Geräte ......................................................................................................... 82

Optionales Zubehör........................................................................................................ 82

Verfügbare Signal- und Stromkabel ............................................................................... 82

Produktübersicht ........................................................................................... 83

Pixel pro Panel.............................................................................................. 84

Abmessungen des Produkts ......................................................................... 85

3. Einrichten des Geräts ................................................................ 86

Wechselstrom ............................................................................................... 86

Wechselstromstecker..................................................................................................... 86

Serienschaltung der Geräte ........................................................................................... 86

Table of Contents

Vivid 4 X4 User Manual Rev. 4

v

4. Montage....................................................................................... 87

Montagerichtung ........................................................................................... 87

Befestigungspunkte....................................................................................... 87

Abmessungen des RB-F50CM Rig Bar ........................................................ 88

Abmessungen des RB-F100CM Rig Bar ...................................................... 88

Rig Bar/Panel-Baugruppe ............................................................................. 89

Alternative Rig Bar/Panel-Baugruppe ............................................................................ 90

Befestigung an einem Gerüst mit Chauvet CT-APP ..................................... 90

Montage an Traversen.................................................................................. 91

5. Erstellung eines modularen Designs ....................................... 92

Vertikaler Zusammenbau der Panels............................................................ 92

Vertikaler Zusammenbau der Panels............................................................................. 93

Horizontaler Zusammenbau der Panels........................................................ 94

Horizontaler Zusammenbau der Panels......................................................................... 95

6. Zusammenschluss und Verkabelung....................................... 96

Testen der Signal- und Stromverbindungen ................................................. 96

Verwendung der Test-Taste des Vivid 4....................................................... 96

Anschließen der Strom- und Signalkabel...................................................... 97

Anschließen der Signalkabel zwischen miteinander verbundenen Panels .................... 97

Anschließen der Stromkabel zwischen miteinander verbundenen Panels .................... 98

7. Pflege und Austausch von LED-Modulen ................................ 99

Vivid 4-Modul ................................................................................................ 99

LED-Chargennummern .................................................................................................. 99

A- und B-Modulen .......................................................................................................... 99

Austausch des Vivid 4 LED-Moduls ............................................................................... 100

8. Panel-Konfiguration................................................................... 101

Entfernen und Montieren der Griffe............................................................... 101

Zugreifen auf das Service-Modul .................................................................. 101

9. Typische Installation.................................................................. 102

10. Betrieb....................................................................................... 103

Zusätzliche Befestigungsmittel und Software ............................................... 103

Über die NovaLCT-Mars ............................................................................... 103

Beschreibung ................................................................................................................. 103

11. Technische Informationen....................................................... 104

Wartung des Vivid 4...................................................................................... 104

Reklamationen .............................................................................................. 104

12. Technische Daten..................................................................... 105

1. Voordat tu begint........................................................................ 106

Wat is er inbegrepen..................................................................................... 106

Claims ........................................................................................................... 106

Conventies van deze handleiding ................................................................. 106

Symbolen ...................................................................................................... 106

Disclaimer ..................................................................................................... 106

BEPERKTE GARANTIE................................................................................................. 106

Intellectueel eigendom .................................................................................. 107

Veiligheidsinstructies..................................................................................... 107

FCC-naleving ................................................................................................................. 107

2. Inleiding....................................................................................... 108

Productbeschrijving....................................................................................... 108

Eigenschappen .............................................................................................................. 108

Extra producten.............................................................................................................. 108

Vivid 4 X4 User Manual Rev. 4

Table of Contents

vi

Optionele accessoires.................................................................................................... 108

Beschikbare signaal- en voedingskabels....................................................................... 108

Productoverzicht ........................................................................................... 109

Pixels per paneel........................................................................................... 110

Afmetingen van het product .......................................................................... 111

3. Instelling...................................................................................... 112

AC-stroom..................................................................................................... 112

AC Plug.......................................................................................................................... 112

Power Linking................................................................................................................. 112

4. Montage....................................................................................... 113

Oriëntatie....................................................................................................... 113

Bevestigingspunten....................................................................................... 113

RB-F50CM Rig Bar-afmetingen .................................................................... 114

RB-F100CM Rig Bar-afmetingen .................................................................. 114

Montage van de Rig Bar/het paneel.............................................................. 115

Alternatieve montage van de Rig Bar/het paneel........................................................... 116

Spantmontage met Chauvet CT-APP ........................................................... 116

Spantinstallatie.............................................................................................. 117

5. Creëren van een modulair ontwerp .......................................... 118

Verticaal samenvoegen van de panelen....................................................... 118

Verticale paneelverbinding............................................................................................. 119

Horizontaal samenvoegen van de panelen................................................... 120

Horizontale paneelverbinding......................................................................................... 121

6. Verbinden en bekabelen............................................................ 122

Testen van signaal- en stroomaansluitingen................................................. 122

Gebruik van de testknop van de Vivid 4........................................................ 122

Aansluiten van stroom- en signaalkabels...................................................... 123

Het signaal aansluiten tussen de samengevoegde panelen.......................................... 123

Het vermogen aansluiten tussen de samengevoegde panelen ..................................... 124

7. Verzorging en vervanging van de LED-module....................... 125

Vivid 4 LED-module ...................................................................................... 125

Lot-nummers van de LED .............................................................................................. 125

A- en B-modules ............................................................................................................ 125

Vivid 4 LED-moduleverwijdering .................................................................................... 126

8. Paneelconfiguratie ..................................................................... 127

De handgrepen verwijderen en installeren.................................................... 127

Toegang tot de servicemodule...................................................................... 127

9. Gebruikelijke Vivid 4-installatie ................................................ 128

10. Werking ..................................................................................... 129

Extra apparatuur en software........................................................................ 129

Over NovaLCT-Mars..................................................................................... 129

Beschrijving.................................................................................................................... 129

11. Technische informatie ............................................................. 130

Onderhoud van de Vivid 4............................................................................. 130

Retouren ....................................................................................................... 130

12. Technische specificaties......................................................... 131

13. Contact Us ................................................................................ 132

1

Before You Begin

Vivid 4 X4 User Manual Rev. 4

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetdj.com

.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR

WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,

France, and Germany::www.chauvetlighting.eu/warranty-registration/

Chauvet warrants that this product shall be free from defects in material and workmanship under normal

use, for the period specified in and subject to the exclusions and limitations set forth in, the full limited

warranty on our website. This warranty extends only to the original purchaser of the product and is not

transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an

original sales receipt from an authorized dealer that shows the product name and date of purchase.

THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal

rights. You may also have other rights that vary from state to state and country to country. This warranty is

• 4 Vivid 4

• 1 Seetronic Powerkon

®

power cord

• 4 Seetronic Powerkon

®

power linking cords

• 4 Seetronic Etherkon

®

signal linking cords

• Road Case

• User Manual

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A product function or menu option

<ENTER> A key to be pressed on the product’s control panel

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

2

Vivid 4 X4 User Manual Rev. 4

Before You Begin

valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your

local distributor.

Intellectual Property

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

CHAUVET, the Chauvet logo, and Vivid 4 are registered trademarks or trademarks of Chauvet & Sons LLC

(d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and

product names and logos referred to herein may be trademarks of their respective companies.

Safety Notes

FCC Compliance

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Make sure the power cord is not crimped or damaged.

• Never disconnect the product from power by pulling or tugging on the cord.

• If mounting the product overhead, always secure to a fastening device using a safety cable.

• Make sure there are no flammable materials close to the product when operating.

• Do not touch the product’s housing when operating because it may be very hot.

• Always make sure that the voltage of the outlet to which you are connecting the product is

within the range stated on the decal or rear panel of the product.

• The product is for indoor use only! (IP30) To prevent risk of fire or shock, do not expose the

product to rain or moisture.

• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from

adjacent surfaces.

• Be sure that no ventilation slots on the product’s housing are blocked.

• Never connect the product to a dimmer.

• Never carry the product from the power cord.

• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at

higher temperatures.

• In the event of a serious operating problem, stop using the product immediately.

• Never try to repair the product. Repairs carried out by unskilled people can lead to damage

or malfunction. Please contact the nearest authorized technical assistance center.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Keep this User Manual for future use. If you sell the product be sure that they receive this

document.

3

Introduction

Vivid 4 X4 User Manual Rev. 4

2. Introduction

Product Description

The Vivid 4 is a video wall system which runs on the Novastar control protocol. The Vivid 4 is a 1 meter by

1 half meter LED video panel that is ideal for both the installation and rental markets.

Features

• Modular video panel vividly displays content without the need of bulky media servers

• Multiple magnets and positioning pins effortlessly allow a tool free, one-man setup

• Elongated size with multiple Speego connectors sets up 2x faster than other panels

• Creates a perfect DJ façade and seamlessly integrates with Serato for displaying music videos

• Panels can be suspended vertically or horizontally offering different aspect ratio options

• Dual power supplies improve reliability and ensure downstream panels don’t lose signal

• Black body LEDs accurately reproduce high-contrast videos

• Intelligent modules with dedicated memory improve the image quality and simplify maintenance

• Extremely lightweight due to the magnesium die-cast housing

Additional Products

• NovaStar Driver (Vivid Drive 23N or VIP Drive 43Nova; required)

Optional Accessories

• ArKaos Media Master Express + KN software

• F-Series Rig Bar (RB-F50CM, RB F100CM)

• VIP Drive 21N (alternative NovaStar driver)

Available Signal and Power Cables

• Signal cables (Neutrik

®

etherCON

®

CAT6 Signal Extensions)

• ETHERCONEXT18IN

• ETHERCONEXT5FT

• ETHERCONEXT10FT

• ETHERCONEXT25FT

• ETHERCONEXT50FT

• Power cables (Neutrik

®

powerCON

®

Power Extensions)

• POWERCONEXT18IN

• POWERCONEXT5FT

• POWERCONEXT10FT

• POWERCONEXT25FT

• POWERCONEXT50FT

4

Vivid 4 X4 User Manual Rev. 4

Introduction

Product Overview

Removable HandlesAlignment Conical (x2)

Alignment

Magnets

(x4)

Female Speego

Connection

Male Speego

Connection

Test Button

Power/Signal Indicator LEDs

Seetronic

Powerkon

®

In

Seetronic

Powerkon

®

Out

Seetronic Etherkon

®

Signal Through Ports

Alignment

Magnet

(x4)

Alignment

Magnets

(x4)

Alignment Conicals

Female Speego

Connection

5

Introduction

Vivid 4 X4 User Manual Rev. 4

Pixels per Panel

Each pixel is 1 tri-color LED. The following table provides the pixels per panel in each Vivid 4. For detailed

specifications, refer to the Technical Specifications

table at the end of this User Manual.

Parameter Vivid 4

Pixels per Panel 104 x 208

Total Pixels per Panel 21,632

Pixels per LED Module 52 x 104

Total Pixels per LED Module 5,408

LED Module Dimensions 250 x 500 mm

To calculate the number of panels, horizontally and vertically, supported by a

single Vivid Drive 23N, you will use:

• The number of pixels per panel.

• The screen resolution you would like to use for your video wall display.

The Vivid Drive 23N is required to operate a Vivid 4 video wall system. Diagrams

of how the Vivid 4 panels and the Vivid Drive 23N connect follow later in this

manual. For detailed information about the Vivid Drive 23N and panel calculation

examples, refer to the Vivid Drive 23N User Manual.

LED Module

6

Vivid 4 X4 User Manual Rev. 4

Introduction

Product Dimensions

1.34 in

34 mm

2.56 in

65 mm

39.37 in

1000 mm

37.17 in

944 mm

17.48 in

444 mm

19.69 in

500 mm

7

Setup

Vivid 4 X4 User Manual Rev. 4

3. Setup

AC Power

Each Vivid 4 has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC,

50/60 Hz. To determine the power requirements for each Vivid 4, refer to the label affixed to the product.

You can also refer to the Technical Specifications

chart in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more

information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetdj.com

.

AC Plug

Each Vivid 4 comes with a power linking cord to connect power between panels and a power input cord.

This cable has a Seetronic Powerkon

®

connector to connect to the Vivid 4 and an Edison plug for power

input.

Power Linking

All Vivid 4 panels support power linking. Refer to the following table for specifications on each panel.

• Always connect the product to a protected circuit (circuit breaker or fuse). Make

sure the product has an appropriate electrical ground to avoid the risk of

electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

Voltage Vivid 4 Products

@ 120 V, 60 Hz 7

@ 230 V, 50 Hz 13

Please refer to all applicable local codes and regulations for the proper installation

of this product.

8

Vivid 4 X4 User Manual Rev. 4

Mounting

4. Mounting

Orientation

Each Vivid 4 is constructed of a die-cast magnesium alloy. This ensures each panel is stable and easy to

install. Each panel also has a convenient built-in handle located on the top and bottom, backside of the

panel along with two alignment conicals on the top. This combination enables you to easily pick up and

securely hold each panel while mounting and working with the panels.

The Vivid 4 can be assembled to provide any number of modular designs. The panels on the top can be

securely hung from a truss or other stable surface. Always hang in a safe position with adequate space for

ventilation, configuration, and maintenance.

Chauvet recommends following the general guidelines below.

• When selecting an installation location, consider ease of access for operation and routine

maintenance.

• Make sure to hang away from any flammable material, as indicated in the Safety Notes

section.

• Never mount in places where rain, extreme temperature changes, or restricted ventilation may

affect it.

• Make sure that the structure and attachment points to which you are hanging the panels can support

the weight.

• Make sure that all load-bearing hardware used can support the weight.

• See the Technical Specifications

for the weight requirement of each Vivid 4.

Mounting Points

2. Male Speego

Connection

3. Female Speego

Connection

1. Threaded Mounting

Holes Size M12 (x4)

1

2

3

1

11

2

22 2

3

333

9

Mounting

Vivid 4 X4 User Manual Rev. 4

RB-F50CM Rig Bar Dimensions

RB-F100CM Rig Bar Dimensions

1.97 in

50 mm

2.76 in

70 mm

0.39 in

10 mm

19.69 in

500 mm

16.38 in

416 mm

2.56 in

65 mm

1.38 in

35 mm

1.18 in

30 mm

Sold Separately

2.76 in

70 mm

1.97 in

50 mm

0.39 in

10 mm

39.37 in

1000 mm

36.06 in

916 mm

3.31 in

84 mm

1.38 in

35 mm

1.18 in

30 mm

2.56 in

65 mm

10

Vivid 4 X4 User Manual Rev. 4

Mounting

Rig Bar/Panel Assembly

1. Insert alignment conicals into the alignment holes and allow magnets to connect.

2. Insert the Rig Bar Speego locking bars into the female Speego connections on the Vivid 4.

3. Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.

4. Twist the tightening knob clockwise until Vivid 4 is secure to Rig Bar.

5. To detach the Rig Bar from the Vivid 4, reverse the previous steps.

• The alignment magnets on the Vivid 4 and F-Series Rig Bar are designed to

temporarily hold the weight of the panel to allow the user to properly align and

tighten the panel into place.

• Either side of the Vivid 4 with female Speego connections can attach to the F-Series

Rig Bar, but only the short side has alignment conicals and magnets. When

attaching the long side of the Vivid 4 to the Rig Bar, take care to ensure that the

pixels across the video assembly are aligned properly.

Warning! The magnetic attachments are not load-bearing, and are intended for

alignment assistance only. Do not release panel until the hanging hardware has been

fully secured.

Bottom View

Top View

Alignment Magnets

Alignment Holes

Male Speego Connection

Rig Bar

Locking Latch

Rig Bar

Locking Tab

Rig Bar Speego

Spring

Knob

Tightening

Knob

Locking Bar

Alignment Conical (x2)

11

Mounting

Vivid 4 X4 User Manual Rev. 4

Alternative Rig Bar/Panel Assembly

The Vivid 4 can be mounted horizontally with the RB-F100CM Rig Bar. Follow the same instructions as in

Rig Bar/Panel Assembly

, but take extra care, as the long side of the product has neither alignment conicals

nor magnets.

When mounting horizontally with the RB-F100CM, one of the Rig Bar Speegos will not be used.

Mounting to Truss with Chauvet CT-APP

The Vivid 4 (with F-Series Rig Bar) can be mounted to truss using the CT-APP from TRUSST®. See the

Quick Reference Guide for the CT-APP at trusst.com

for more information.

12

Vivid 4 X4 User Manual Rev. 4

Mounting

Truss Installation

Refer to the following diagram for truss installation. Chauvet offers the F-Series Rig Bar (sold separately)

specifically designed for hanging the panels.

The M12 mounting points are not intended for hanging or suspending from a truss or

other overhead structure.

In order to suspend/hang the panels from a truss or other overhead structure, use

the F-series Rig Bars (RB-F50CM or -F100CM, sold separately).

The illustrations above are examples only. Please refer to all applicable local codes

and regulations for the proper installation of the product.

Attach to Truss Using Optional F-Series Rig Bar

13

Creating a Modular Design

Vivid 4 X4 User Manual Rev. 4

5. Creating a Modular Design

Vertically Joining the Panels

Each Vivid 4 can be easily joined vertically to a truss using an optional rig bar and the 2 female Speego

connections located at the top corners of each panel. Use the male Speego connections at the bottom of

each panel to connect additional panels. These connectors stay recessed when not being used.

Male Speego

Spring Knob

Tightening Latch

Locking Bar

La page est en cours de chargement...

CHAUVET DJ VIVID 4 LED Video Panel Display – 4 Pack Manuel utilisateur

Ce manuel convient également à

CHAUVET DJ VIVID 4 LED Video Panel Display – 4 Pack Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents