Electrolux EGG6042NSX Manuel utilisateur

Marque: Electrolux

Modèle: EGG6042NSX

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

EGG6042

EN Hob User Manual 2

FR Table de cuisson Notice d'utilisation 17

CONTENTS

1. SAFETY INFORMATION....................................................................................3

2. SAFETY INSTRUCTIONS..................................................................................4

3. PRODUCT DESCRIPTION................................................................................ 7

4. DAILY USE......................................................................................................... 7

5. HINTS AND TIPS............................................................................................... 8

6. CARE AND CLEANING......................................................................................9

7. TROUBLESHOOTING......................................................................................10

8. INSTALLATION................................................................................................ 11

9. TECHNICAL INFORMATION........................................................................... 14

10. ENERGY EFFICIENCY.................................................................................. 15

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that

brings with it decades of professional experience and innovation. Ingenious and

stylish, it has been designed with you in mind. So whenever you use it, you can

be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.electrolux.com2

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible if an incorrect installation and use causes

injuries and damages. Always keep the instructions with

the appliance for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

• If the appliance has a child safety device, we

recommend you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 3 years should be kept away

unless continuously supervised.

1.2 General Safety

• The appliance and its accessible parts become hot

during use. Do not touch the heating elements.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be

dangerous and may result in fire.

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a

fire blanket.

• Do not store items on the cooking surfaces.

ENGLISH 3

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use a steam cleaner to clean the appliance.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• Where the appliance is directly connected to the

power supply, an all-pole isolating switch with a

contact gap is required. Complete disconnection in

compliance with the conditions specified in

overvoltage category III must be guaranteed. The

earth cable is excluded from this.

• When you route the mains cable, make sure that the

cable doesn't come into direct contact (for example

using insulating sleeving) with parts that can reach

temperatures of more than 50°C above room

temperature.

2. SAFETY INSTRUCTIONS

This appliance is suitable for the

following markets: LY DZ MA TN

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the

window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a non-

combustile separation panel under the

appliance to prevent access to the

bottom.

2.2 Electrical Connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

www.electrolux.com4

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Gas connection

• All gas connections should be made

by a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the

adjustment of the appliance are

compatible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply

is on the rating plate.

• This appliance is not connected to a

device, which evacuates the products

of combustion. Make sure to connect

the appliance according to current

installation regulations. Pay attention

to requirements regarding adequate

ventilation.

2.4 Use

WARNING!

Risk of injury, burns and

electrical shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

ENGLISH 5

heated objects away from fats and

oils when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

• Use only stable cookware with the

correct shape and diameter larger

than the dimensions of the burners.

• Make sure cookware is centrally

positioned on the burners.

• Make sure the flame does not go out

when you quickly turn the knob from

the maximum to the minimum

position.

• Use only the accessories supplied

with the appliance.

• Do not install a flame diffuser on the

burner.

• The use of a gas cooking appliance

results in the production of heat and

moisture. Provide good ventilation in

the room where the appliance is

installed.

• Prolonged intensive use of the

appliance may call for additional

ventilation, for example opening of a

window, or more effective ventilation,

for example increasing the level of

mechanical ventilation where present.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

• Do not let acid liquids, for example

vinegar, lemon juice or limescale

remover, touch the hob. This can

cause matt patches.

2.5 Care and cleaning

• Clean regularly the appliance to

prevent the deterioration of the

surface material.

• Deactivate the appliance and let it

cool down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

• Do not clean the burners in the

dishwasher.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Flat the external gas pipes.

2.7 Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

www.electrolux.com6

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout

1 3

Rapid burner

Semi-rapid burner

Auxiliary burner

Control knobs

3.2 Control knob

Symbol Description

no gas supply / off posi‐

tion

Symbol Description

ignition position / maxi‐

mum gas supply

minimum gas supply

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Burner overview

A) Burner cap

B) Burner crown

C) Ignition candle

D) Thermocouple

4.2 Ignition of the burner

Always light the burner

before you put on the

cookware.

WARNING!

Be very careful when you

use open fire in the kitchen

environment. The

manufacturer declines any

responsibility in case of the

flame misuse.

1. Push the control knob down and turn

it counterclockwise to the maximum

gas supply position (

2. Keep the control knob pushed for

equal or less than 10 seconds. This

ENGLISH 7

lets the thermocouple warm up. If

not, the gas supply is interrupted.

3. Adjust the flame after it is regular.

If after some tries the burner

does not light, check if the

crown and its cap are in

correct positions.

WARNING!

Do not keep the control knob

pushed for more than 15

seconds. If the burner does

not light after 15 seconds,

release the control knob,

turn it into off position and try

to light the burner again after

minimum 1 minute.

CAUTION!

In the absence of electricity

you can ignite the burner

without electrical device; in

this case approach the

burner with a flame, turn the

control knob counter-

clockwise to maximum gas

supply position and push it

down. Keep the control knob

pushed for equal or less

than 10 seconds to let the

thermocouple warm up.

If the burner accidentally

goes out, turn the control

knob to the off position and

try to light the burner again

after minimum 1 minute.

The spark generator can

start automatically when you

switch on the mains, after

installation or a power cut. It

is normal.

The hob is supplied with the

progressive valves. They

make the flame regulation

more precise.

4.3 Turning the burner off

To put the flame out, turn the knob to the

off position

WARNING!

Always turn the flame down

or switch it off before you

remove the pans from the

burner.

5. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

5.1 Cookware

CAUTION!

Do not use cast iron pans,

potstones, earthenware, grill

or toaster plates. The

stainless steel can become

tarnished if it is too much

heated.

WARNING!

Do not put the same pan on

two burners.

WARNING!

Do not put unstable or

damaged pots on the burner

to prevent from spill and

injury.

CAUTION!

Make sure that the bottoms

of pots do not stand above

the control knob, otherwise

the flame heats the control

knob up.

CAUTION!

Make sure that pot handles

are not above the front edge

of the cooktop.

www.electrolux.com8

CAUTION!

Make sure that the pots are

placed centrally on the

burner in order to get

maximum stability and to get

lower gas consumption.

5.2 Diameters of cookware

Use cookware with

diameters applicable to the

size of burners.

Burner Diameter of

cookware

(mm)

Rapid 180 - 260

Semi-rapid 120 - 220

Auxiliary 80 - 180

6. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

6.1 General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the

surface have no effect on how the hob

operates.

• Use a special cleaner applicable for

the surface of the hob.

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

6.2 Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when

you replace the pan

supports to prevent the

hob top from damage.

2. The enamel coating occasionally can

have rough edges, so be careful

when you wash the pan supports by

hand and dry them. If necessary,

remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre

of the burner.

6.3 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the hob.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and non-abrasive

detergent. After cleaning, wipe the

hob dry with a soft cloth.

• To clean the enamelled parts, cap

and crown, wash them with warm

soapy water and dry them carefully

before you put them back on.

6.4 Cleaning the spark plug

This feature is obtained through a

ceramic ignition candle with a metal

electrode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

6.5 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the

conditions of the gas supply pipe and the

pressure adjuster, if fitted.

ENGLISH 9

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

There is no spark when

you try to activate the

spark generator.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correct‐

ly connected to the electri‐

cal supply.

The fuse is released. Make sure that the fuse is

the cause of the malfunc‐

tion. If the fuse releases

again and again, contact a

qualified electrician.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes im‐

mediately after ignition.

Thermocouple is not heat‐

ed up sufficiently.

After lightning the flame,

keep the knob pushed for

equal or less than 10 sec‐

onds.

The flame ring is uneven. Burner crown is blocked

with food residues.

Make sure that the injector

is not blocked and the

burner crown is clean.

7.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Make sure,

you operated the hob correctly. If not the

servicing by a service technician or

dealer will not be free of charge, also

during the warranty period. The

instructions about the Service Centre

and conditions of guarantee are in the

guarantee booklet.

www.electrolux.com10

7.3 Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO.

03 IT

MADE IN ITALY

TYPE

IP20

0049

A B C

A) Stick it on Guarantee Card and send

this part (if applicable).

B) Stick it on Guarantee Card and keep

this part (if applicable).

C) Stick it on instruction booklet.

8. INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

The rating plate is on the bottom of the

hob.

Model .......................................

PNC .........................................

Serial number ...........................

8.2 Gas Connection

WARNING!

The following instructions

about installation,

connection and maintenance

must be carried out by

qualified personnel in

compliance with standards

and local regulations in

force.

Choose fixed connections or use a

flexible pipe in stainless steel in

compliance with the regulation in force. If

you use flexible metallic pipes, be careful

they do not come in touch with mobile

parts or they are not squeezed. Also be

careful when the hob is put together with

an oven.

ENGLISH 11

Make sure that the gas

supply pressure of the

appliance obeys the

recommended values. The

adjustable connection is

fixed to the comprehensive

ramp by means of a

threaded nut G 1/2". Screw

the parts without force,

adjust the connection in the

necessary direction and

tighten everything.

A B C

A) End of shaft with nut

B) Washer

C) Elbow (if needed)

Liquid gas

Use the rubber pipe holder for liquid gas.

Always engage the gasket. Then

continue with the gas connection.

The flexible pipe is prepared for apply

when:

• it can not get hot more than room

temperature, higher than 30°C;

• it is no longer than 1500 mm;

• it shows no throttles;

• it is not subject to traction or torsion;

• it does not get in touch with cutting

edges or corners;

• it can be easily examined in order to

make sure its condition.

The control of preservation of the flexible

pipe consists in checking that:

• it does not show cracks, cuts, marks

of burnings on the two ends and on its

full length;

• the material is not hardened, but

shows its correct elasticity;

• the fastening clamps are not rusted;

• expired term is not due.

If one or more defects are visible, do not

repair the pipe, but replace it.

WARNING!

When installation is

complete, make sure that

the seal of each pipe fitting

is correct. Use a soapy

solution, not a flame!

8.3 Injectors replacement

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the

type of gas you use (see table in

"Technical Information" chapter).

4. Assemble the parts, follow the same

procedure backwards.

5. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply. You can find

this plate in the package supplied

with the appliance.

If the supply gas pressure is changeable

or different from the necessary pressure,

you must fit an applicable pressure

adjuster on the gas supply pipe.

8.4 Adjustment of minimum

level

To adjust the minimum level of the

burners:

1. Light the burner.

2. Turn the knob on the minimum

position.

3. Remove the knob.

4. With a thin screwdriver, adjust the

bypass screw position (A).

5. If you change:

• from natural gas G20 20 mbar to

liquid gas, fully tighten the bypass

screw in.

www.electrolux.com12

• from liquid gas to natural gas G20

20 mbar, undo the bypass screw

approximately 1/4 of a turn.

WARNING!

Make sure the flame does

not go out when you quickly

turn the knob from the

maximum position to the

minimum position.

8.5 Electrical connection

• Make sure that the rated voltage and

type of power on the rating plate

agree with the voltage and the power

of the local power supply.

• This appliance is supplied with a

mains cable. It has to be supplied with

a correct plug which can hold the load

that the rating plate rates. Make sure

that you install the plug in a correct

socket.

• Always use a correctly installed

shockproof socket.

• Make sure that there is an access to

the mains plug after the installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• There is a risk of fire when the

appliance is in connection with an

extension cable, an adapter or a

multiple connection. Make sure that

the ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up

to a temperature higher than 90° C.

Make sure that you connect

the blue neutral cable to the

terminal with a letter "N" on

it. Connect the brown (or

black) phase cable to the

terminal which has a letter

"L". Keep the phase cable

connected at all times.

8.6 Connection cable

To replace the connection cable use only

the special cable or its equivalent. The

cable type is: H03V2V2-FT90.

Make sure that the cable section is

applicable to the voltage and the working

temperature. The yellow / green earth

wire must be approximately 2 cm longer

than the brown (or black) phase wire.

8.7 Building In

min. 55 mm

min. 650 mm

550 mm

min. 100 mm

30 mm

470 mm

10 mm

3 mm

11 mm

A) supplied seal

B) supplied brackets

CAUTION!

Install the appliance only on

a worktop with flat surface.

8.8 Possibilities for insertion

The panel installed below the hob must

be easy to remove and let an easy

access in case a technical assistance

intervention is necessary.

ENGLISH 13

Kitchen unit with door

min 20 mm

(max 150 mm)

30 mm

60 mm

A) Removable panel

B) Space for connections

Kitchen unit with oven

The electrical connection of the hob and

the oven must be installed separately for

safety reasons and to let easy remove

oven from the unit.

9. TECHNICAL INFORMATION

9.1 Hob dimensions

Width 580 mm

Depth 510 mm

9.2 Bypass diameters

BURNER Ø BYPASS 1/100 mm

Rapid 42

Semi-rapid 32

Auxiliary 28

9.3 Other technical data

TOTAL POWER:

Gas original: G20 (2H) 20 mbar = 8 kW

Gas replacement: G30 (3+) 28-30 mbar = 567 g/h

G31 (3+) 37 mbar = 557 g/h

Electric supply: 220-240 V ~ 50/60 Hz

Appliance category: II2H3+

Gas connection: G 1/2"

Appliance class: 3

9.4 Gas burners for NATURAL GAS G20 20 mbar

BURNER NORMAL POWER

MINIMUM POWER

INJECTOR MARK

1/100 mm

Rapid 3,0 0,75 119

www.electrolux.com14

BURNER NORMAL POWER

MINIMUM POWER

INJECTOR MARK

1/100 mm

Semi-rapid 2,0 0,45 96

Auxiliary 1,0 0,33 70

9.5 Gas burners for LPG G30/G31 28-30/37 mbar

BURNER NORMAL

POWER

MINIMUM

POWER

INJECTOR

MARK 1/100

NOMINAL GAS FLOW g/h

G30 28-30

mbar

G31 37 mbar

Rapid 2,8 0,75 86 204 200

Semi-rapid 2,0 0,45 71 145 143

Auxiliary 1,0 0,33 50 73 71

10. ENERGY EFFICIENCY

10.1 Product information according to EU 66/2014

Model identification EGG6042NSX

Type of hob Built-in hob

Number of gas burners 4

Energy efficiency per gas burner

(EE gas burner)

Left rear - Semi-rapid 59.2%

Right rear - Semi-rapid 59.2%

Left front - Rapid 57.4%

Right front - Auxiliary not applicable

Energy efficiency for the gas hob

(EE gas hob)

58.6%

EN 30-2-1: Domestic cooking appliances burning gas - Part 2-1 : Rational use of

energy - General

10.2 Energy saving

• Before use, make sure that the burners and pan supports are assembled correctly.

• Use cookware with diameters applicable to the size of burners.

• Center the pot on the burner.

• When you heat up water, use only the amount you need.

• If it is possible, always put the lids on the cookware.

• When the liquid starts to boil, turn down the flame to barely simmer the liquid.

• If it is possible, use a pressure cooker. Refer to its user manual.

ENGLISH 15

11. ENVIRONMENT CONCERNS

Recycle the materials with the symbol

. Put the packaging in applicable

containers to recycle it. Help protect the

environment and human health and to

recycle waste of electrical and electronic

appliances. Do not dispose appliances

marked with the symbol with the

household waste. Return the product to

your local recycling facility or contact

your municipal office.

www.electrolux.com16

TABLE DES MATIÈRES

1. CONSIGNES DE SÉCURITÉ........................................................................... 18

2. INSTRUCTIONS DE SÉCURITÉ......................................................................19

3. DESCRIPTION DE L'APPAREIL......................................................................22

4. UTILISATION QUOTIDIENNE..........................................................................23

5. CONSEILS........................................................................................................24

6. ENTRETIEN ET NETTOYAGE.........................................................................25

7. EN CAS D'ANOMALIE DE FONCTIONNEMENT.............................................26

8. INSTALLATION................................................................................................ 27

9. CARACTÉRISTIQUES TECHNIQUES.............................................................30

10. RENDEMENT ÉNERGÉTIQUE......................................................................31

NOUS PENSONS À VOUS

Merci d'avoir choisi ce produit Electrolux. Avec ce produit, vous bénéficiez de

dizaines d'années d'expérience professionnelle et d'innovation. Ingénieux et

élégant, il a été conçu sur mesure pour vous. Grâce à cet appareil, vous savez

que chaque utilisation vous apportera satisfaction.

Bienvenue chez Electrolux.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.electrolux.com

Enregistrer votre produit pour obtenir un meilleur service :

www.registerelectrolux.com

Acheter des accessoires, consommables et pièces de rechange d'origine pour

votre appareil :

www.electrolux.com/shop

SERVICE APRÈS-VENTE

N'utilisez que des pièces de rechange d'origine.

Avant de contacter le service, assurez-vous de disposer des informations

suivantes : Modèle, PNC, numéro de série.

Vous trouverez ces informations sur la plaque signalétique.

Avertissement/Attention : consignes de sécurité.

Informations générales et conseils.

Informations en matière de protection de l'environnement.

Sous réserve de modifications.

FRANÇAIS

1. CONSIGNES DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

peut être tenu pour responsable des dommages et

blessures liés à une mauvaise installation ou utilisation.

Conservez toujours cette notice avec votre appareil pour

vous y référer ultérieurement.

1.1 Sécurité des enfants et des personnes

vulnérables

• Cet appareil peut être utilisé par des enfants âgés

d'au moins 8 ans et par des personnes ayant des

capacités physiques, sensorielles ou mentales

réduites ou dénuées d’expérience ou de

connaissance, s’ils (si elles) sont correctement

surveillé(e)s ou si des instructions relatives à

l’utilisation de l'appareil en toute sécurité leur ont été

données et si les risques encourus ont été

appréhendées.

• Les enfants ne doivent pas jouer avec l’appareil.

• Ne laissez pas les emballages à la portée des enfants.

• Tenez les enfants et les animaux éloignés de

l'appareil lorsqu'il est en cours de fonctionnement ou

lorsqu'il refroidit. Les parties accessibles sont

chaudes.

• Si l'appareil est équipé d'un dispositif de sécurité

enfants, nous vous recommandons de l'activer.

• Le nettoyage et l’entretien par l'usager ne doivent pas

être effectués par des enfants sans surveillance.

• Les enfants de moins de 3 ans, sans surveillance,

doivent être tenus à l'écart de l'appareil.

1.2 Sécurité générale

• L'appareil et ses parties accessibles deviennent

chauds pendant son fonctionnement. Ne touchez pas

les résistances.

www.electrolux.com18

• Ne faites pas fonctionner l'appareil avec un minuteur

externe ou un système de commande à distance.

• Il peut être dangereux de laisser chauffer de la graisse

ou de l'huile sans surveillance sur une table de

cuisson car cela pourrait provoquer un incendie.

• N'essayez jamais d'éteindre un feu avec de l'eau.

Éteignez l'appareil puis couvrez les flammes, par

exemple avec un couvercle ou une couverture

ignifuge.

• N'entreposez rien sur les surfaces de cuisson.

• Ne posez pas d'objets métalliques tels que couteaux,

fourchettes, cuillères ou couvercles sur la table de

cuisson car ils pourraient chauffer.

• N'utilisez pas de nettoyeur vapeur pour nettoyer

l'appareil.

• Si le câble d'alimentation est endommagé, il doit être

remplacé par le fabricant, un service de maintenance

agréé ou un technicien qualifié afin d'éviter tout

danger.

• Si l'appareil est relié directement à l'alimentation

électrique, installez un sectionneur avec une ouverture

de contact. Il est indispensable de garantir une

déconnexion complète conformément aux conditions

de surtension de catégorie III. Le fil de terre n'est pas

concerné.

• Lorsque vous acheminez le câble d'alimentation,

assurez-vous qu'il n'entre pas en contact direct (par

exemple, à l'aide d'un manchon isolant) avec des

parties pouvant atteindre des températures

supérieures de 50 °C à la température ambiante.

2. INSTRUCTIONS DE SÉCURITÉ

Cet appareil est adapté aux marchés

suivants: LY DZ MA TN

2.1 Instructions d’installation

AVERTISSEMENT!

L'appareil doit être installé

uniquement par un

professionnel qualifié.

• Retirez l'intégralité de l'emballage

FRANÇAIS 19

• N'installez pas et ne branchez pas un

appareil endommagé.

• Suivez scrupuleusement les

instructions d'installation fournies

avec l'appareil.

• Respectez l'espacement minimal

requis par rapport aux autres

appareils et éléments.

• Soyez toujours vigilants lorsque vous

déplacez l'appareil car il est lourd.

Portez toujours des gants de sécurité.

• Isolez les surfaces découpées à l'aide

d'un matériau d'étanchéité pour éviter

que la moisissure ne provoque des

gonflements.

• Protégez la partie inférieure de

l'appareil de la vapeur et de

l'humidité.

• N'installez pas l'appareil près d'une

porte ou sous une fenêtre. Les

récipients chauds risqueraient de

tomber de l'appareil lors de l'ouverture

de celles-ci.

• Si l'appareil est installé au-dessus de

tiroirs, assurez-vous qu'il y a

suffisamment d'espace entre le fond

de l'appareil et le tiroir supérieur pour

que l'air puisse circuler.

• Le dessous de l'appareil peut devenir

très chaud. Veillez à installer un

panneau de séparation ignifuge sous

l'appareil pour en bloquer l'accès.

2.2 Branchement électrique

AVERTISSEMENT!

Risque d'incendie ou

d'électrocution.

• L'ensemble des branchements

électriques doit être effectué par un

technicien qualifié.

• L'appareil doit être relié à la terre.

• Avant toute intervention, assurez-

vous que l'appareil est débranché.

• Vérifiez que les données électriques

figurant sur la plaque signalétique

correspondent à celles de votre

réseau. Si ce n'est pas le cas,

contactez un électricien.

• Assurez-vous que l'appareil est bien

installé. Un câble d'alimentation lâche

et inapproprié ou une fiche (si

présente) non serrée peuvent être à

l'origine d'une surchauffe des bornes.

• Utilisez le câble d'alimentation

électrique approprié.

• Ne laissez pas le câble d'alimentation

s'emmêler.

• Assurez-vous qu'une protection anti-

électrocution est installée.

• Utilisez un collier anti-traction sur le

câble.

• Assurez-vous que le câble

d'alimentation ou la fiche (si présente)

n'entrent pas en contact avec les

surfaces brûlantes de l'appareil ou les

récipients brûlants lorsque vous

branchez l'appareil à des prises

électriques situées à proximité.

• N'utilisez pas d'adaptateurs

multiprises ni de rallonges.

• Veillez à ne pas endommager la fiche

secteur (si présente) ni le câble

d'alimentation. Contactez notre centre

de maintenance agréé ou un

électricien pour remplacer le câble

d'alimentation s'il est endommagé.

• La protection contre les chocs des

parties sous tension et isolées doit

être fixée de telle manière qu'elle ne

puisse pas être enlevée sans outils.

• Ne connectez la fiche d'alimentation

secteur à la prise de courant secteur

qu'à la fin de l'installation. Assurez-

vous que la fiche d'alimentation est

accessible une fois l'appareil installé.

• Si la prise de courant est lâche, ne

branchez pas la fiche d'alimentation

secteur.

• Ne tirez jamais sur le câble

d'alimentation électrique pour

débrancher l'appareil. Tirez toujours

sur la fiche.

• N'utilisez que des systèmes

d'isolation appropriés : des coupe-

circuits, des fusibles (les fusibles à

visser doivent être retirés du support),

des disjoncteurs différentiels et des

contacteurs.

• L'installation électrique doit être

équipée d'un dispositif d'isolement à

coupure omnipolaire. Le dispositif

d'isolement doit présenter une

distance d'ouverture des contacts

d'au moins 3 mm.

www.electrolux.com20

La page charge ...

Electrolux EGG6042NSX Manuel utilisateur

Marque: Electrolux

Modèle: EGG6042NSX

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

Electrolux EGG6042NSX Manuel utilisateur

Electrolux EGG6042NSX Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents