Dometic CF 18 Guide d'installation

Taper
Guide d'installation
CF18, CF25, CF35, CF40, CF50
Compressor Cooler
Operating manual . . . . . . . . . . . . . . . . . . . . . 6
Glacière à compression
Notice d’utilisation . . . . . . . . . . . . . . . . . . .30
Nevera por compresor
Instrucciones de uso . . . . . . . . . . . . . . . . . .55
Geleira com compressor
Manual de instruções . . . . . . . . . . . . . . . . .79
EN
FR
ES
PT
COOLING BOXES
COOLFREEZE
CF18-CF50-O-US.book Seite 1 Donnerstag, 19. Oktober 2017 8:28 08
CF18-CF50-O-US.book Seite 2 Donnerstag, 19. Oktober 2017 8:28 08
CF18, CF25, CF35, CF40, CF50
3
4
2
3
1
1
1
CF 25, CF 35, CF 40
2
CF 18
1 2 3 4
5
3
CF18-CF50-O-US.book Seite 3 Donnerstag, 19. Oktober 2017 8:28 08
CF18, CF25, CF35, CF40, CF50
4
CF 25, CF 35, CF 40, CF 50
ON
OFF
SET
POWER
UP
+
DOWN
ERROR
°
1 3 4 5 6 72
4
1
CF 25
5
100-240V~AC
FUSE
12/24V DC
12 3
CF 35, CF 40, CF 50
6
1
21
CF 35, CF 40, CF 50
7
CF18-CF50-O-US.book Seite 4 Donnerstag, 19. Oktober 2017 8:28 08
CF18, CF25, CF35, CF40, CF50
5
CF 50
AB
8
1 2 3
4
5
6
9
1 2
0
CF18-CF50-O-US.book Seite 5 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50
6
Please read this operating manual carefully before starting the device.
Keep it in a safe place for future reference. If the device is passed on to
another person, this operating manual must be handed over to the user
along with it.
The manufacturer cannot be held liable for damage resulting from improper usage
or incorrect operation.
Contents
1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.1 General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.2 Operating the cooling device safely . . . . . . . . . . . . . . . . . . . . . . . . . .9
3 Scope of delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6 Function description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.1 Scope of functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
6.2 Operating and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
7Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
7.1 Before initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
7.2 Energy saving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
7.3 Connecting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
7.4 Using the battery monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
7.5 Using the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.6 Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
7.7 Switching off the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7.8 Defrosting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7.9 Replacing the AC fuse (CF35, CF40, CF50). . . . . . . . . . . . . . . . . . 22
7.10 Replacing the DC plug fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.11 Replacing the light bulb (CF25, CF35, CF40, CF50) . . . . . . . . . . 23
8 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CF18-CF50-O-US.book Seite 6 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50 Explanation of symbols
7
10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
11 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1 Explanation of symbols
D
!
!
A
I
DANGER!
Safety instruction: Failure to observe this instruction will cause fatal or
serious injury.
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
CF18-CF50-O-US.book Seite 7 Donnerstag, 19. Oktober 2017 8:28 08
EN
Safety instructions CF18, CF25, CF35, CF40, CF50
8
2 Safety instructions
2.1 General safety
!WARNING!
Do not operate the cooling device if it is visibly damaged.
If this cooling device's power cable is damaged, it must be replaced
by the manufacturer, customer service or a similarly qualified person in
order to prevent safety hazards.
This cooling device may only be repaired by qualified personnel.
Improper repairs can lead to considerable hazards.
This cooling device can be used by children aged 8 years or over, as
well as by persons with diminished physical, sensory or mental capac-
ities or a lack of experience and/or knowledge, providing they are
supervised or have been taught how to use the cooling device safely
and are aware of the resulting risks.
Cleaning and user maintenance must not be carried out by children
without supervision.
Children must not play with the cooling device.
Children must be supervised to ensure that they do not play with the
cooling device.
Always keep and use the cooling device out of the reach of children
under the age of 8 years.
Do not store any explosive substances such as spray cans with a
flammable propellant in the cooling device.
!CAUTION!
Disconnect the cooling device from the power supply
before each cleaning and maintenance
after every use
Food may only be stored in its original packaging or in suitable
containers.
ANOTICE!
Check that the voltage specification on the type plate corresponds to
that of the energy supply.
Only connect the cooling device as follows:
With the DC cable to a DC outlet in the vehicle
Or with the AC connection cable to the AC power supply
CF18-CF50-O-US.book Seite 8 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50 Safety instructions
9
Never pull the plug out of the socket by the cable.
If the cooling device is connected to the DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
If the cooling device is connected to the DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device
at the end of its life-cycle to an appropriate recycling.
2.2 Operating the cooling device safely
!CAUTION!
Before starting the cooling device, ensure that the power supply line
and the plug are dry.
ANOTICE!
Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose.
Do not place the cooling device near open flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
Danger of overheating!
Ensure at all times that there is a minimum of 50 mm (2") ventilation on
all four sides of the cooling device. Keep the ventilation area free of
any objects that could restrict the air flow to the cooling components.
Do not place the cooling device in closed compartments or areas with
none or minimal air flow.
Ensure that the ventilation openings are not covered.
Do not fill the inner container with ice or liquids.
Never immerse the cooling device in water.
Protect the cooling device and the cable against heat and moisture.
CF18-CF50-O-US.book Seite 9 Donnerstag, 19. Oktober 2017 8:28 08
EN
Scope of delivery CF18, CF25, CF35, CF40, CF50
10
3Scope of delivery
4Accessories
Available as accessories (not included in the scope of delivery):
If you have questions regarding the accessories, contact your local service partner.
No. in
fig. 1, page 3 Quantity Description
1 1 Cooler
2 1 Connection cable for DC connection
31
Only CF35, CF40, CF50
Connection cable for AC connection
42
Only CF35, CF40, CF50
Carrying handle, consisting of:
–2 holders
–1 handle
4 fastening screws
–1Operating manual
Description Ref. no.
Insulated cover bag for CF18 9600003792
Insulated cover bag for CF25 9600003793
Insulated cover bag for CF35 9600003794
Insulated cover bag for CF40 9600003795
Insulated cover bag for CF50 9600003796
CF18-CF50-O-US.book Seite 10 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50 Intended use
11
5 Intended use
The cooler is suitable for cooling and freezing foods.
The cooler is designed to be operated from:
a DC on-board power supply of a vehicle, boat or caravan
a DC auxiliary battery
an AC power supply (CF35, CF40, CF50)
For operating CF 18, CF25 at 120 Vw you need an AC/DC power supply rectifier
(accessory).
!
6 Function description
The cooler can refrigerate or freeze food products. A fast-acting and efficient cooling
system provides maintenance-free cooling performance with a compressor and con-
trol module.
The cooler is designed for mobile use and can be carried by using a folding carrying
bracket (CF18), two recessed grips (CF25) or two removable carrying handles
(CF35, CF40, CF50).
The cooler can withstand a short-term inclination of 30°, for example on boats.
CAUTION! Health hazard!
Please check if the cooling capacity of the device is suitable for storing
the food or medicine you wish to cool.
CF18-CF50-O-US.book Seite 11 Donnerstag, 19. Oktober 2017 8:28 08
EN
Function description CF18, CF25, CF35, CF40, CF50
12
6.1 Scope of functions
CF18 CF25 CF35, CF40,
CF50
Power supply with priority circuit for
connecting to the power supply
Battery monitor to protect the
vehicle battery 2-level 3-level
Turbo mode for rapid cooling
Display with temperature gauge
(switches off automatically at low
battery voltage)

Temperature setting rotary-knob two buttons in steps of 1 °C (2 °F)
Removable carrying handles
CF18-CF50-O-US.book Seite 12 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50 Function description
13
6.2 Operating and display elements
CF25, CF35, CF40
Lock for lid (fig. 21, page 3)
CF18
Operating panel and DC power supply inlet (fig. 3, page 3)
Item Description Explanation
1 TEMPERATURE Temperature controller,
cooling temperature at the end positions:
COLD: +10 °C (+50 °F)
FREEZE: –18 °C (0 °F)
2 POWER Status indication
LED lights up green: Device is switched on and
ready for operation
LED lights up yellow: Set temperature has been
reached
3 ERROR LED flashes red: Device is switched on but not
ready for operation
4 BATTERY MONITOR Switch-on device/battery monitor:
0: Device is switched off
HIGH: Device is switched on, battery
monitor is in HIGH mode
LOW: Device is switched on, battery
monitor is in LOW mode
512/24 VgDC voltage supply inlet
CF18-CF50-O-US.book Seite 13 Donnerstag, 19. Oktober 2017 8:28 08
EN
Function description CF18, CF25, CF35, CF40, CF50
14
CF25, CF35, CF40, CF50
Operating panel (fig. 4, page 4)
CF25
Connection sockets (fig. 5, page 4)
CF35, CF40, CF50
Connection sockets (fig. 6, page 4)
Item Description Explanation
1ON
OFF
Switches the cooler on or off when the button is pressed for
between one and two seconds
2 POWER Status indication
LED lights up green: Compressor is on
LED lights up orange: Compressor is off
LED flashes orange: Display switched off
automatically due to low
battery voltage
3 ERROR LED flashes red: Device is switched on but not
ready for operation
4 SET Selects the input mode
– Temperature setting
– Celsius or Fahrenheit display
– Set battery monitor
5 Display, shows the information
6 UP + Press once to increase the value
7 DOWN – Press once to decrease the value
Item Description
1 DC voltage supply inlet
Item Description
1 AC voltage supply inlet
2Fuse holder
3 DC voltage supply inlet
CF18-CF50-O-US.book Seite 14 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50 Operation
15
7Operation
7.1 Before initial use
I
Mounting the handles (CF35, CF40, CF50)
The handles are enclosed unassembled. If you wish to attach the handles, proceed
as follows:
Make a handle by putting two holders (fig. 71, page 4) and a handle (fig. 72,
page 4) together.
Fasten the grip with the enclosed screws in the holes provided.
Turning the lid stop around (CF50)
You can turn the lid stop around if you want to open the lid from the other side. To
do this, proceed as follows:
Open the lid and pull it out (fig. 8A, page 5).
Turn the lid.
Insert the lid in the lid holders on the side opposite the cooler (fig. 8B, page 5).
Selecting the temperature units (CF25, CF35, CF40, CF50)
You can switch the temperature display between Celsius and Fahrenheit. This is how
to do it:
Switch on the cooler.
Press the “SET” button (fig. 44, page 4) twice.
Use the “UP +” (fig. 46, page 4) and “DOWN –” (fig. 47, page 4) buttons to
select Celsius or Fahrenheit.
The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter “Cleaning and maintenance” on page 24).
CF18-CF50-O-US.book Seite 15 Donnerstag, 19. Oktober 2017 8:28 08
EN
Operation CF18, CF25, CF35, CF40, CF50
16
7.2 Energy saving tips
Choose a well ventilated installation location which is protected against direct
sunlight.
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
Defrost the cooling device once a layer of ice forms.
Avoid unnecessary low temperatures.
7.3 Connecting the cooler
AC extension cord
!
!
Select a UL/CSA listed 120 Vw/10 A outdoor use extension cord according to
the following table:
WARNING!
Because of potential safety hazards under certain conditions, the
manufacturer strongly recommends against the use of an extension
cord. However, if you must use an extension cord, it is absolutely
necessary that it be a UL-Listed (in the United States) or a CSA-Listed
(in Canada) appliance extension cord, with 10 A (minimum), 120 V
electrical ratings.
CAUTION!
Under no circumstances should you attempt to splice extension
cord wires.
Do not use power strips or 2-way splitters.
Always unroll or uncoil an extension cord to avoid heat retention and
possible melting.
Maximum cord length
120 Vw10 ft. (3 m) 25 ft. (7.6 m) 50 ft. (15.2 m) 100 ft.
(30.5 m)
Wire conductors 3333
AWG 14 (1.6 mm²) 12 (2 mm²) 12 (2 mm²) 12 (2 mm²)
CF18-CF50-O-US.book Seite 16 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50 Operation
17
DC extension cord
!
Select a 12 V/24 Vg/10 A automotive use extension cord according to the
following table:
Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 Vg or 24 Vg.
A
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
CAUTION!
The manufacturer does not recommend using any type of DC
extension cord.
Under no circumstances should you attempt to splice extension
cord wires.
Do not use power strips or 2-way splitters.
Always unroll or uncoil an extension cord to avoid heat retention and
possible melting.
Maximum cord length
12 Vg3 ft. (0.9 m) 6 ft. (1.8 m) 10 ft. (3 m) 12 ft. (3.7 m)
24 Vg6 ft. (1.8 m) 10 ft. (3 m) 15 ft. (4.6 m) 25 ft. (7.6 m)
AWG 14 (1.6 mm²) 12 (2 mm²) 10 (2.6 mm²) 8 (3.3 mm²)
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
CF18-CF50-O-US.book Seite 17 Donnerstag, 19. Oktober 2017 8:28 08
EN
Operation CF18, CF25, CF35, CF40, CF50
18
Using the fused DC plug
A
Plug the DC connection cable (fig. 12, page 3) into the DC power supply inlet
of the cooler (fig. 51, page 4/fig. 63, page 4).
Connect the connection cable to the DC power outlet.
Connecting to an AC power supply (e.g. in the home or office)
(CF35, CF40, CF50)
D
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source. The priority circuit automatically switches the
cooler to power supply operation, if the device is connected to an AC power supply,
even if the DC connection cable is still attached.
When switching between the AC power supply and the battery supply, the red LED
may light up briefly.
Plug the AC connection cable (fig. 13, page 3) into the AC power supply inlet
of the cooler (fig. 61,page 4).
Connect the connection cable to the AC power outlet.
7.4 Using the battery monitor
The device is equipped with a multi-level battery monitor that protects your vehicle
battery against excessive discharging when the device is connected to the on-board
DC supply.
If the cooler is operated when the vehicle ignition is switched off, the cooler switches
off automatically as soon as the supply voltage falls below a set level. The cooler will
switch back on once the battery has been recharged to the restart voltage level.
NOTICE! Danger of damage!
For protection of the device the DC cable supplied includes a fuse inside
the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
DANGER! Danger of electrocution!
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
If you are operating your cooler on board a boat from a power supply
connection of 120 Vw, you must install a residual current circuit
breaker between the 120 V AC power supply and the cooler.
Seek advice from a trained technician.
CF18-CF50-O-US.book Seite 18 Donnerstag, 19. Oktober 2017 8:28 08
EN
CF18, CF25, CF35, CF40, CF50 Operation
19
A
In “HIGH” mode, the battery monitor responds faster than at the levels “LOW” and
“MED” (see the following table).
Selecting the battery monitor mode (CF25, CF35, CF40, CF50)
Switch on the cooler.
Press the “SET” button (fig. 44, page 4) three times.
Use the “UP +” (fig. 46, page 4) and “DOWN –” (fig. 47, page 4) buttons to
select the battery monitor mode.
The selected mode then appears in the display for a few seconds. The display
flashes several times before it returns to the current temperature.
I
NOTICE! Danger of damage!
When switched off by the battery monitor, the battery will no longer be
fully charged. Avoid continous starting and shutting off of the vehicles
engine when using the cooler in an automotive environment. Allow the
vehicle to recharge the battery before powering the cooler on.
CF18 CF25, CF35, CF40, CF50
Battery monitor mode LOW HIGH LOW MED HIGH
Switch-off voltage at 12 V 10.4 V 11.5 V 10.1 V 11.4 V 11.8 V
Restart voltage at 12 V 11.5 V 12.5 V 11.1 V 12.2 V 12.6 V
Switch-off voltage at 24 V 22.1 V 24.0 V 21.5 V 24.1 V 24.6 V
Restart voltage at 24 V 23.6 V 25.4 V 23.0 V 25.3 V 26.2 V
NOTE
When the cooler is supplied by the starter battery, select the battery
monitor mode “HIGH”. If the cooler is connected to a supply battery,
the battery monitor mode “LOW” will suffice.
If you wish to operate the cooler from the AC power supply, set the
battery monitor to the “LOW” position.
CF18-CF50-O-US.book Seite 19 Donnerstag, 19. Oktober 2017 8:28 08
EN
Operation CF18, CF25, CF35, CF40, CF50
20
7.5 Using the cooler
A
Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated air can
dissipate.
I
Close the cooler, see chapter “Connecting the cooler” on page 16.
I
A
CF18
Set the slide switch (fig. 34, page 3) to "HIGH" when your providing power
from your vehicle's DC power source.
Set the slide switch (fig. 34, page 3) to "LOW" when you providing power
from an external DC power supply source.
The “POWER” LED is lit green.
The cooler starts cooling the interior.
When the cooling temperature has been reached, the “POWER” LED is yellow lit.
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure that the ventilation
slots are not covered. The cooler MUST maintain a MINIMUM of
2 inches (51 mm) away from walls or similar surfaces which could restrict
important air flow requirements of the cooling system.
NOTE
Place the cooler as shown (fig. 1, page 3). If you operate the box in a
different position it can be damaged.
NOTE
If you wish to operate the cooler from the AC power supply, set the
battery monitor to the “LOW” position.
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
CF18-CF50-O-US.book Seite 20 Donnerstag, 19. Oktober 2017 8:28 08
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Dometic CF 18 Guide d'installation

Taper
Guide d'installation

dans d''autres langues