Tube
You
ameriwoodhome.com
STEP 8
16
(x32)
10
With the assistance of a second person,
carefully turn the unit over so that the
back is accessible.
Attach the Back Panel (I) to boards
(A),(B),(C),(D),(E) and (F) as
shown.Verify that the unit is square
before connecting with 32 Screws (10).
90°
I
II
Proper Black Panel Alignment
All outside edges of the back
panel will be equal with all out
side edges of your unit.
Adjustment
If outside edges of back panel are not equal with outside
of your unit, apply pressure to corners of your unit to
square up your unit. Position Back Panel on unit to check
squareness. If needed, repeat unit unit is square.
Before attaching the back panel
be sure that the unit is at 90°.
Please make sure that the backs are
attached securely.
All screws must be driven into the parts
straight and tightened firmly. Failure to do
so could cause instability, product collapse,
and/or serious injury.
WARNING
10
A
C
F
B
D
E
Warning facing
outward.