Snap-On MB200R Mode d'emploi

Snap-On
Marque
Snap-On
Modèle
MB200R
Catégorie
Hauts-parleurs portatifs
Taper
Mode d'emploi
Introduction:
Congratulations on your purchase of the MB200R portable multi-function, engineered and manufactured by us. The
MB200R includes 1” X2 tweeter, 3” X2 mediant and 6” woofer that produces an even and smooth studio quality
sound in a sound reinforcement speaker. Our design goal was to build a speaker with accurate playback, smooth dis-
persion of mid and high frequencies, and an ergonomic design for easy transport and setup. The result is a sound
reinforcement system dynamic enough to use at home, in the studio, parties or in a home theater and outing use.
Features:
1. Steel basket woofer
2. Auxiliary line input
3. High Temperature Voice Coil
4. Stereo Sound output
5. Bluetooth Pairing
6. NFC function
7. USB Playing Charging
8. Built-in Rechargeable Battery(7.4V/6.6A)
Cautions:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electric shock, do not open the unit. There are NO REPLACEABLE PARTS INSIDE. Please refer
servicing to a qualified service technician.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of
damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES.
8. Make sure ALL of your equipment is completely OFF and lower ALL VOLUME, LEVEL & GAIN controls before connect-
ing the speaker.
9. Rechargeable Battery Usage:
a. Please charge the battery timely when the power of the battery is used up.
b. After used, please charge the battery every three month.
c. If storage without charge for lone time, it may not be charge successfully anymore.
Disregarding any of the above will void your warranty!!!!!
OPERATIONS MANUAL –MB200R
#MVFUPPUI Speaker
Functions:
1. Start playback or to pause.
2. To return to the start of the previous track.
3. To skip to the beginning of the next track.
4. Bluetooth pairing button: Short press the
button, Bluetooth pairing will be connected or
disconnected.
5.Bluetooth stereo function: First, keep the two
MB200R speakers be connected, then connect
to Bluetooth on your telephone, once two
speakers be connected, you can short press the BT PAIRING button on one of speaker to pair, if pairing is unsuccessful
within 20 seconds, you can short press the button on another speaker to make pairing again.
6. Volume
7. Volume .
8. Power button
Note: Press the POWER button to start the unit and press the POWER button a while to power it off. Don't release the
POWER button until the speaker restart when the speaker crashes ( all buttons have no effect).
9. NFC function(can connect bluetooth quickly).
10. “S” logo.
11. DC Input
12. Power Indicator
13. Battery Level LED indicator 1-5.
14. Charge output: USB output is charging small portable USB devices (5V , 1A) only.
15. Aux Input
16. Adapter Place
Warning: Make sure speaker is off and all LEVEL controls are down (counterclockwise) before every use.
Connection:
1. For this unit you can connect a mixer, microphone or CD player directly into your MB200R, To connect a device use
3.5mm Jack connector to connect to the AUX(14)input.
2. Turn on your mixer/microphones or other signal source, then turn on your unit, the Bluetooth indicator (4) will be lit,
and will have Voice prompts, now you can adjust volume controls to a reasonable level.
3. Bluetooth connection:
(1). Press Bluetooth button to enter Bluetooth status, and the indicator will be flashed quickly.
(2). Connect on your pairing device to complete pairing to the MB200R, if connected successfully the indicator will be
flashed slowly. If disconnected, you can re-press the Bluetooth button to pair again.
4. Stereo Bluetooth function:
(1). Open your pairing device, then enter to Bluetooth status.
(2). Press BT Pairing button on both MB200R speakers, they will be connected each other, if disconnect them, you can
re-press the BT pairing button again.
131211
14
15
7
5
8
10
6
4
2
1
9
3
16
ADAPTER PLUG-IN
MB200R
RECHARGEABLE BT PAIRING SPEAKER
IN 12V
POWER 1 2 3 4 5 OUT AUX-IN
5V 2A
IC Caution.
- English:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
- French:
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be us
ed in portable exposure condition without restriction.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Snap-On MB200R Mode d'emploi

Snap-On
Marque
Snap-On
Modèle
MB200R
Catégorie
Hauts-parleurs portatifs
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents