Sony DCC-U50A Le manuel du propriétaire

Catégorie
Accessoires de préparation de café
Taper
Le manuel du propriétaire
Câble USB fourni avec
l’appareil pour le raccorder
Témoin POWER
2
1
3 Mettez l’appareil à recharger.
Toutefois, ceci peut savérer inutile. (Voir le mode demploi
de l’appareil.)
Si vous n’utilisez pas l’adaptateur de batterie USB
Pour éviter toute consommation inutile d’énergie,
débranchez cet appareil de l’allume-cigare quand vous ne
l’utilisez pas.
Lorsque vous coupez le moteur du véhicule
Débranchez cet appareil de lallume-cigare dès que le moteur
du véhicule est coupé. Selon le type de véhicule,
l’alimentation nest pas coupée automatiquement même si le
moteur est coupé. Dans ce cas, cela peut entraîner une
consommation inutile de la batterie du véhicule.
Remarques
Veillez à bien brancher cet appareil dans lallume-cigare.
Il est possible que cet appareil ne puisse pas être inséré selon la
position ou la forme de l’allume-cigare.
Branchez l’appareil de sorte qu’il ne bouge pas en cas de
freinage brusque.
Faites cheminer le câble USB de sorte qu’il ne gêne pas la
conduite, qu’il ne se coince pas lors des mouvements des
passagers ou qu’il ne soit pas endommagé lors du réglage des
sièges, etc.
N’arrachez pas et ne tirez jamais le câble USB raccordé à
l’appareil. Ceci risquerait de provoquer des problèmes de
fonctionnement ou une rupture des câbles.
N’utilisez pas l’appareil dans un endroit soumis à des
projections liquides ou à l’humidité afin d’éviter tout risque
d’incendie ou d’électrocution.
Le fonctionnement nest pas garanti si vous utilisez un
concentrateur USB ou un prolongateur USB. Conformez-vous
à la méthode de raccordement adaptée à lappareil audio et
vidéo portatif (« WALKMAN », etc.).
En cours de fonctionnement, cet appareil risque de chauffer.
Ceci n’indique pas un problème de fonctionnement.
Remplacement du fusible
Si cet appareil ne fonctionne pas correctement, vérifiez le
fusible de la fiche de l’allume-cigare.
Si le fusible a fondu, remplacez-le.
Fusible
Pour le serrer
Fiche de
l’allume-cigare
Extrémité
de la fiche
Pour le retirer
1 Retirez cette partie de la fiche de l’allume-
cigare.
2 Détachez l’extrémité de la fiche en la tournant
dans le sens anti-horaire.
3 Retirez le fusible.
4 Vérifiez le fusible.
Si le fusible a fondu, passez à l’étape 5.
Si le fusible na pas fondu, passez à l’étape
6.
5 Installez un nouveau fusible.
Utilisez un fusible d’une intensité correcte, comme indiqué
sur le compartiment à fusible de cet appareil (1 A, 125 V,
20 mm).
6 Insérez le fusible.
7 Remettez l’extrémité de la fiche en place en la
tournant à fond dans le sens horaire.
Remarques
L’utilisation d’un fusible d’une intensité supérieure peut
provoquer des dommages ou un incendie.
N’utilisez pas un morceau de fil électrique pour remplacer le
fusible.
Si le fusible fond à nouveau, consultez votre revendeur.
Spécifications
Tension dentrée 12/24 V CC (uniquement pour
les véhicules dotés d’une mise
à la masse négative )
Tension de sortie 5,0 V CC
Courant de sortie moyen 500 mA
Dimensions
Environ 106 mm
Environ 101 mm
Environ 21 mm
Environ
35 mm
Masse Environ 37 g (1,31 oz)
La conception et les spécifications sont sujettes à
modifications sans préavis.
Anzeige POWER
2
1
Mit dem anzuschließenden
Gerät mitgeliefertes USB-Kabel
3 Stellen Sie am Gerät den Ladevorgang ein.
Bei einigen Geräten ist es nicht erforderlich, den
Ladevorgang einzustellen. (Schlagen Sie dazu bitte in der
Bedienungsanleitung zum Gerät nach.)
Wenn Sie den USB-Autobatterie-Ladeadapter
nicht verwenden
Damit der Autobatterie nicht unnötig Strom entzogen wird,
trennen Sie das Gerät von der Zigarettenanzünderbuchse,
wenn es nicht verwendet wird.
Wenn Sie den Motor abstellen
Trennen Sie das Gerät von der Zigarettenanzünderbuchse,
wenn der Motor nicht läuft. Je nach Automodell schaltet
sich die Stromversorgung bei abgestelltem Motor
möglicherweise nicht automatisch aus. In diesem Fall
könnte der Autobatterie unnötig Strom entzogen werden.
Hinweise
Stecken Sie das Gerät fest in die Zigarettenanzünderbuchse.
Je nach Lage und Form der Zigarettenanzünderbuchse lässt
sich das Gerät möglicherweise nicht anschließen.
Sichern Sie das angeschlossene Gerät so, dass es auch bei
plötzlichem Bremsen nicht im Auto herumfliegt.
Verlegen Sie das USB-Kabel unbedingt so, dass es beim Fahren
nicht hinderlich ist, dass sich die Passagiere nicht darin
verfangen können und dass es nicht in den Sitzschienen usw.
eingeklemmt und beschädigt werden kann.
Ziehen Sie auf keinen Fall an dem USB-Kabel, das an das
Gerät angeschlossen ist. Andernfalls kann es zu
Fehlfunktionen kommen und die Kabeladern können
abreißen.
Verwenden Sie das Gerät nicht an einem Ort, an dem es Nässe
oder hoher Luftfeuchtigkeit ausgesetzt ist. Andernfalls besteht
Feuergefahr oder die Gefahr eines elektrischen Schlags.
Der einwandfreie Betrieb kann bei Verwendung eines USB-
Hubs oder USB-Verlängerungskabels nicht garantiert werden.
Gehen Sie zum Anschließen der Geräte wie zum tragbaren
AV-Gerät (Audio/Video) („WALKMAN“ usw.) angegeben vor.
Das Gerät kann sich im Betrieb erwärmen. Dabei handelt es
sich nicht um eine Fehlfunktion.
Austauschen der Sicherung
Wenn das Gerät nicht richtig funktioniert, überprüfen Sie
die Sicherung im Zigarettenanzünderstecker.
Wenn die Sicherung durchgebrannt ist, wechseln Sie sie aus.
Sicherung
Anziehen
Zigarettenanzünderstecker
Spitze des
Steckers
Lösen
1 Ziehen Sie das Gerät aus der
Zigarettenanzünderbuchse.
2 Drehen Sie die Spitze des Steckers gegen den
Uhrzeigersinn und nehmen Sie sie ab.
3 Nehmen Sie die Sicherung heraus.
4 Überprüfen Sie die Sicherung.
Wenn die Sicherung durchgebrannt ist, fahren Sie mit
Schritt 5 fort.
Wenn die Sicherung nicht durchgebrannt ist, fahren Sie mit
Schritt 6 fort.
5 Setzen Sie eine neue Sicherung ein.
Verwenden Sie eine Sicherung mit dem richtigen Ampere-
Wert. Dieser ist im Sicherungsfach des Geräts angegeben
(1 A, 125 V, 20 mm).
6 Setzen Sie die Sicherung ein.
7 Bringen Sie die Steckerspitze wieder an und
drehen Sie sie im Uhrzeigersinn gut fest.
Hinweise
Bei einer Sicherung mit einem höheren Ampere-Wert kann es
zu schweren Schäden kommen und es besteht Feuergefahr.
Verwenden Sie auf keinen Fall ein Stück Draht anstelle einer
Sicherung.
Wenn die neue Sicherung erneut durchbrennt, wenden Sie sich
an Ihren Sony-Händler.
Technische Daten
Eingangsspannung 12/24 V Gleichstrom (nur für
negativ geerdete Fahrzeuge)
Nennausgangsspannung 5,0 V Gleichstrom
Nennausgangsstromstärke 500 mA
Abmessungen
ca. 106 mm
ca. 101 mm
ca. 21 mm
ca. 35 mm
Gewicht ca. 37 g
Änderungen, die dem technischen Fortschritt dienen,
bleiben vorbehalten.
English
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
CAUTION
You are cautioned that any changes or modification not expressly
approved in this manual could void your authority to operate
this equipment.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the
European Union and other European
countries with separate collection
systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural resources. For
more detailed information about recycling of this product, please
contact your local Civic Office, your household waste disposal
service or the shop where you purchased the product.
Notice for customers: the following information is only
applicable to equipment sold in countries applying EU
directives
The manufacturer of this product is Sony Corporation, 1-7-1
Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized
Representative for EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For
any service or guarantee matters please refer to the addresses
given in separate service or guarantee documents.
Precautions
On safety
Unplug the unit from the cigarette lighter socket if it is not to
be used. To disconnect the unit, grasp the unit and pull it.
Never pull the cord connected to the unit.
Should any liquid or solid object fall into the unit, disconnect
the unit from the cigarette lighter socket and the equipment
and have the unit checked by qualified personnel before
operating it any further.
Installation
Do not place the USB charging car battery adaptor in a
location where it is:
Subject to extreme high temperature.
Subject to direct sunlight or near a heat source.
Subject to mechanical vibration or shock.
Subject to excessive dust.
Operation
Make sure the current and voltage of the USB rechargeable
device match the outlet.
For safety, if the input current is too high, the unit will
automatically shut down.
To prevent damage, be careful not to drop or otherwise cause a
mechanical shock to the unit.
After using, disconnect the unit from the cigarette lighter
socket and the equipment.
Disconnect the unit from the cigarette lighter socket by grasping
the unit itself. Do not pull on the cord connected to the unit.
To avoid short-circuiting, do not allow the terminals of the
unit or connector to touch any metal object.
Note that data stored in the portable AV (Audio/Video) device
connected to this unit may be lost or damaged if the engine is
started or stopped with this unit inserted into the cigarette
lighter socket.
Cleaning
Clean the unit with a soft, dry cloth. If the unit is very dirty,
wipe it off with a soft cloth lightly moistened with a mild
detergent solution, and then wipe with a soft dry cloth.
Do not use any type of solvent such as alcohol, thinner, or
benzine as it may damage the finish of the unit.
If you use any chemical cleaner, observe the instructions
provided with the product.
If the exterior of the unit is splashed with any type of solvent
such as insecticide, or remains in contact for a long time with
rubber or vinyl, the finish of the exterior may be damaged.
How to Use
Be sure to charge the device with the engine of the car
running. If the unit is left plugged into the cigarette lighter
socket when the engine is not running, power may be
consumed from the car battery.
Notes
Ensure that the USB charging car battery adaptor is safely installed
so as not to interfere with the operation of the accelerator or gears.
Never perform connection and charging while your car is in motion.
Français
Avant de faire fonctionner cet appareil, lisez attentivement le
présent mode d’emploi et conservez-le pour toute référence
ultérieure.
AVERTISSEMENT
Afin de réduire les risques d’incendie ou délectrocution,
nexposez pas cet appareil à la pluie ou à l’humidité.
AVERTISSEMENT
Tout changement ou modification non expressément approuvé
dans le présent manuel risque d’annuler votre autorité à utiliser
cet appareil.
Traitement des appareils électriques
et électroniques en fin de vie
(Applicable dans les pays de l’Union
Européenne et aux autres pays
européens disposant de systèmes de
collecte sélective)
Ce symbole, apposé sur le produit ou sur son
emballage, indique que ce produit ne doit pas être traité avec les
déchets ménagers. Il doit être remis à un point de collecte
approprié pour le recyclage des équipements électriques et
électroniques. En sassurant que ce produit est bien mis au rebut
de manière appropriée, vous aiderez à prévenir les conséquences
négatives potentielles pour l’environnement et la santé humaine.
Le recyclage des matériaux aidera à préserver les ressources
naturelles. Pour toute information supplémentaire au sujet du
recyclage de ce produit, vous pouvez contacter votre municipalité,
votre déchetterie ou le magasin où vous avez acheté le produit.
Avis à l’intention des clients : les informations
suivantes s’appliquent uniquement aux appareils
vendus dans des pays qui appliquent les directives de
l’Union Européenne
Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japon. Le représentant autorisé pour
les questions de compatibilité électromagnétique (EMC) et la
sécurité des produits est Sony Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question
relative au SAV ou à la garantie, merci de bien vouloir vous
référer aux coordonnées contenues dans les documents relatifs
au SAV ou la garantie.
Précautions
Sécurité
Débranchez l’appareil de lallume-cigare si vous prévoyez de ne
pas l’utiliser. Pour débrancher lappareil, saisissez ce dernier et
tirez dessus. Ne tirez jamais le câble raccordé à l’appareil.
En cas de chute dun objet solide ou de liquide à l’intérieur de
l’appareil, débranchez l’appareil de la prise de l’allume-cigare et
de tout équipement et faites vérifier l’appareil par un
technicien qualifié avant de l’utiliser de nouveau.
Installation
Ne placez pas ladaptateur de batterie USB dans un lieu :
sujet à de très hautes températures.
sujet aux rayons directs du soleil ou près dune source de chaleur.
sujet à des vibrations ou à des chocs mécaniques.
sujet à une poussière excessive.
Opération
Assurez-vous que le courant et la tension de lappareil USB
rechargeable correspondent bien à ceux de la prise.
Par mesure de sécurité, si le courant dentrée nest pas correct,
l’appareil est automatiquement mis hors tension.
Afin d’éviter d’endommager lappareil, assurez-vous de ne pas
laisser tomber ou cogner l’appareil.
Après utilisation, débranchez lappareil de lallume-cigare.
Débranchez l’appareil de lallume-cigare en le tirant par la
fiche. Ne tirez pas sur le câble raccordé à lappareil.
Pour éviter tout risque de court-circuit, ne laissez pas les
broches de lappareil ou du connecteur entrer en contact avec
un objet métallique.
Notez que les données enregistrées dans lappareil audio et
vidéo portatif raccordé à cet appareil risquent d’être perdues ou
endommagées si le moteur du véhicule est démarré ou arrêté
alors que cet appareil est connecté à l’allume-cigare.
Nettoyage
Nettoyez l’appareil en utilisant un chiffon doux et sec. Si
l’appareil est très sale, nettoyez-le avec un chiffon doux
légèrement humidifié à l’aide d’une solution détergente douce
et terminez le nettoyage avec un chiffon sec et doux.
N’utilisez aucun solvant tel que de lalcool, du diluant ou de
l’essence qui risquerait de ternir la finition de lappareil.
Si vous utilisez un nettoyant chimique, respectez les
instructions d’utilisation fournies avec le produit.
Si l’extérieur de lappareil reçoit des éclaboussures de solvants
tels que des insecticides, ou reste en contact pendant une
période prolongée avec du caoutchouc ou du vinyle, la finition
de l’extérieur pourrait être abîmée.
Utilisation
Assurez-vous de charger la batterie lorsque le moteur du
véhicule tourne. Si lappareil reste connecté à l’allume-cigare
alors que le moteur du véhicule est coupé, la batterie du
véhicule risque de se décharger.
Remarques
Assurez-vous que l’adaptateur de batterie USB est
correctement branché pour ne pas gêner la conduite.
N’effectuez jamais ni raccordement, ni mise en charge en
conduisant.
1 Insérez l’adaptateur de batterie USB dans
l’allume-cigare.
Le témoin POWER sallume en vert.
2 Raccordez l’adaptateur de batterie USB à un
appareil audio et vidéo portatif USB
rechargeable (« WALKMAN »*, etc.) à l’aide du
câble USB fourni avec l’appareil.
Installez l’appareil dans un lieu sûr.
* « WALKMAN » et le logo « WALKMAN » sont des
marques déposées de Sony Corporation.
1 Insert the USB charging car battery adaptor
into the cigarette lighter socket.
The POWER indicator lights up in green.
2 Connect the USB charging car battery adaptor
to a portable USB rechargeable AV (Audio/
Video) device (“WALKMAN”*, etc.) using the
USB cable supplied with the device.
Install the device in a safe place.
* “WALKMAN” and “WALKMAN” logo are registered
trademarks of Sony Corporation.
POWER indicator
2
1
USB cable supplied with the
device to connect to unit
3 Set the device to recharge.
It may not be necessary to set the device to recharge. (See
devices instruction manual.)
While not using the USB charging car battery
adaptor
To avoid unnecessary car battery consumption, unplug this
unit from the cigarette lighter socket when not in use.
When you turn the car engine off
Unplug this unit from the cigarette lighter socket whenever
the engine of the car is not running. Depending on the car
type, even if the engine is off, the power supply may not turn
off automatically. In this case, this may cause unnecessary
car battery consumption.
Notes
Plug securely into the cigarette lighter socket.
This unit may not fit, depending on the location or shape of
the cigarette lighter socket.
Secure the connected device so that it will not move in the
event of sudden braking.
Be careful to route the USB cable so that it will not interfere
with driving, become entangled with passenger movements, or
be damaged by seat adjustments, etc.
Never yank or pull the USB cable connected to the unit. This
may cause malfunctions or wire breaks.
Do not use the device in a place subject to liquid or moisture
to avoid fire or electric shock.
Performance is not guaranteed in case of using an USB hub or
USB extension cable. Follow the connection method
designated by the portable AV (Audio/Video) device
(“WALKMAN”, etc.).
This unit may become warm while using. This is not a
malfunction.
Fuse replacement
If this unit does not work correctly, check the fuse in the
cigarette lighter plug.
If the fuse is blown, replace it.
Fuse
to tighten
Cigarette lighter
plug
End of the
plug
to remove
1 Pull this unit out of the cigarette lighter socket.
2 Detach the end of the plug by turning it
anti-clockwise.
3 Take out the fuse.
4 Check the fuse.
If the fuse is blown, go to Step 5.
If no fuse is blown, go to Step 6.
5 Install a new fuse.
Use a fuse of the correct amperage, as stated on the fuse
compartment of this unit (1 A, 125 V, 20 mm).
6 Insert the fuse.
7 Reattach the end of the plug by turning it
clockwise firmly.
Notes
Use of a higher amperage fuse may cause serious damage or
fire.
Do not use a piece of wire instead of a fuse.
If the replaced fuse blows again, consult your dealer.
Specifications
Input voltage DC 12/24 V (only for
negative grounded cars)
Rated output voltage DC 5.0 V
Rated output current 500 mA
Dimensions
Approx. 101 mm
Approx. 21 mm
Approx.
35 mm
Approx. 106 mm
Mass Approx. 37 g (1.31 oz)
Design and specifications are subject to change without
notice.
Deutsch
Lesen Sie diese Anleitung vor Inbetriebnahme des Systems
bitte genau durch und bewahren Sie sie zum späteren
Nachschlagen sorgfältig auf.
ACHTUNG
Um Feuergefahr und die Gefahr eines elektrischen Schlags zu
vermeiden, setzen Sie das Gerät weder Regen noch sonstiger
Feuchtigkeit aus.
WARNUNG
Wir weisen darauf hin, dass Änderungen oder Umbauten, die
nicht ausdrücklich in dieser Anleitung genehmigt werden, Ihre
Befugnis zur Benutzung dieses Gerätes nichtig machen können.
Entsorgung von gebrauchten
elektrischen und elektronischen
Geräten (anzuwenden in den Ländern
der Europäischen Union und anderen
europäischen Ländern mit einem
separaten Sammelsystem für diese
Geräte)
Das Symbol auf dem Produkt oder seiner Verpackung weist
darauf hin, dass dieses Produkt nicht als normaler
Haushaltsabfall zu behandeln ist, sondern an einer
Annahmestelle für das Recycling von elektrischen und
elektronischen Geräten abgegeben werden muss. Durch Ihren
Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie
die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt
und Gesundheit werden durch falsches Entsorgen gefährdet.
Materialrecycling hilft, den Verbrauch von Rohstoffen zu
verringern. Weitere Informationen zum Recycling dieses
Produkts erhalten Sie bei Ihrer Gemeindeverwaltung, den
kommunalen Entsorgungsbetrieben oder dem Geschäft, in dem
Sie das Produkt gekauft haben.
Hinweis für Kunden: Die folgenden Informationen
gelten nur für Geräte, die in Ländern verkauft werden,
in denen EU-Richtlinien gelten
Der Hersteller dieses Produktes ist Sony Corporation, 1-7-1
Konan Minato-ku Tokio, 108-0075 Japan. Bevollmächtigter für
EMV und Produktsicherheit ist Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Deutschland. Für
Kundendienst- oder Garantieangelegenheiten wenden Sie sich
bitte an die in Kundendienst- oder Garantiedokumenten
genannten Adressen.
Zur besonderen Beachtung
Sicherheit
Trennen Sie das Gerät von der Zigarettenanzünderbuchse,
wenn Sie es nicht verwenden. Ziehen Sie dabei am Gerät
selbst. Ziehen Sie auf keinen Fall an dem Kabel, das an das
Gerät angeschlossen ist.
Sollten Fremdkörper oder Flüssigkeiten in das Gerät gelangen,
trennen Sie es von der Zigarettenanzünderbuchse und von dem
angeschlossenen Gerät. Lassen Sie das Gerät von qualifiziertem
Fachpersonal überprüfen, bevor Sie es wieder benutzen.
Aufstellung
Stellen Sie den USB-Autobatterie-Ladeadapter nicht an
einen Ort, an dem er folgenden Bedingungen ausgesetzt ist:
extremer Hitze.
direktem Sonnenlicht oder einer nahen Wärmequelle.
mechanischen Erschütterungen oder Stößen.
übermäßiger Staubentwicklung.
Betrieb
Achten Sie darauf, dass die Stromstärke und die Spannung des
aufladbaren USB-Geräts denen der Steckdose entsprechen.
Wenn die Eingangsstromstärke zu hoch ist, schaltet sich das
Gerät aus Sicherheitsgründen automatisch aus.
Um Schäden zu vermeiden, achten Sie darauf, das Gerät nicht
fallen zu lassen oder anderweitig Stößen auszusetzen.
Lösen Sie das Gerät nach Gebrauch von der
Zigarettenanzünderbuchse und dem angeschlossenen Gerät.
Ziehen Sie am Gerät, wenn Sie es von der
Zigarettenanzünderbuchse trennen. Ziehen Sie nicht an dem
Kabel, das an das Gerät angeschlossen ist.
Um einen Kurzschluss zu vermeiden, achten Sie darauf, dass
die Kontakte und der Stecker des Geräts nicht mit einem
Metallgegenstand in Berührung kommen.
Wenn Sie ein tragbares AV-Gerät (Audio/Video) an dieses
Gerät anschließen und den Motor anlassen oder abstellen,
solange dieses Gerät in die Zigarettenanzünderbuchse
eingesteckt ist, können auf dem AV-Gerät gespeicherte Daten
verloren gehen oder beschädigt werden.
Reinigung
Reinigen Sie das System mit einem weichen, trockenen Tuch.
Bei hartnäckiger Verschmutzung reinigen Sie es mit einem
weichen Tuch, das Sie leicht mit einer milden
Reinigungslösung angefeuchtet haben, und reiben es
anschließend mit einem weichen Tuch trocken.
Verwenden Sie keine Lösungsmittel wie Alkohol, Verdünnung
oder Benzin. Diese könnten die Oberfläche des Gehäuses
angreifen.
Wenn Sie ein chemisches Reinigungsmittel verwenden,
beachten Sie bitte die Anweisungen zum jeweiligen Produkt.
Wenn das Gehäuse des Systems mit einem Lösungsmittel, wie
z. B. einem Insektizid, besprüht wird oder längere Zeit mit
Gummi oder Vinyl in Berührung kommt, kann die Oberfläche
des Gehäuses beschädigt werden.
Gebrauch
Laden Sie das Gerät unbedingt bei laufendem Motor. Wenn
das Gerät bei abgestelltem Motor in die
Zigarettenanzünderbuchse eingesteckt bleibt, wird der
Autobatterie möglicherweise Strom entzogen.
Hinweise
Installieren Sie den USB-Autobatterie-Ladeadapter unbedingt
so, dass das Gaspedal und die Gangschaltung problemlos
betätigt werden können.
Schließen Sie das Gerät während der Fahrt nicht an und
führen Sie auch keinen Ladevorgang durch.
1 Stecken Sie den USB-Autobatterie-Ladeadapter
in die Zigaretten
anzünderbuchse.
Die Anzeige POWER leuchtet grün.
2 Verbinden Sie den USB-Autobatterie-
Ladeadapter über das mit dem jeweiligen Gerät
gelieferte USB-Kabel mit einem tragbaren,
aufladbaren USB-AV-Gerät (Audio/Video)
(„WALKMAN“* usw.).
Legen Sie das Gerät an einen sicheren Ort.
* WALKMAN“ und das „WALKMAN“-Logo sind
eingetragene Markenzeichen der Sony Corporation.
© 2006 Sony Corporation Printed in China
DCC-U50A
2-660-020-23(1)
USB Charging
Car Battery Adaptor
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Gebruiksaanwijzing
Istruzioni per l’uso
1 / 1

Sony DCC-U50A Le manuel du propriétaire

Catégorie
Accessoires de préparation de café
Taper
Le manuel du propriétaire