PN: 03MF814500003 Rev A
Model No. MF8145
●
Bluetooth
®
Version :
Bluetooth
2.1 + EDR (Enhanced Data Rate)
●
Bluetooth
Operating Frequency : 2402 - 2480 MHz
●
Supported
Bluetooth
profiles*: A2DP (Wireless Stereo
Bluetooth
), AVRCP (
Bluetooth
Remote Control)
●
Operating Range for
Bluetooth
: Up to 10 meters (Measured in open space. Walls and
structures may affect range of device.)
●
Operating Range for Wireless Link : Up to 30 meters (Measured in open space. Walls
and structures may affect range of device.)
●
Wireless Link
Operating Frequency : 5725 - 5850 MHz (5150 - 5250 MHz for Japan only)
●
Device Operating Temperature range : 0
o
C to 45
o
C
●
Power Adapter Operating Temperature range : 0
o
C to 40
o
C
These specifications apply to the Creative D5xm operating from the supplied 15V DC
3.5A universal power adapter.
Note: Compliance markings are located on the bottom of this product.
Compatibility Disclaimer
●
Wireless performance is dependent on your device’s
Bluetooth
wireless technology. Refer to
your device manufacturer’s manual.
●
Every electronic device is subjected to radio frequency (RF) interference from external
sources. These include the connection between linked Creative D5xm and Creative DSxm
wireless subwoofer.
●
Creative will not be liable for any loss of data or leakage resulting from the use of these
devices.
Please read the following before using the Creative Products:
●
Use a mains plug that is appropriate for your country or region.
●
To be completely disconnected from the power input, the mains plug has to be
disconnected/detached from the mains.
●
Disconnect the mains plug when the device is expected to be unused for several days.
Additional guidelines for wireless devices
●
The short wave radio frequency signals of a wireless device may impair the operation of
other electronic and medical devices
●
Switch off the device where it is prohibited. Do not use the device in medical facilities,
aircraft, refueling points, close to automatic doors, automatic alarms or other automatically
controlled devices
●
Keep this device at least 20 cm from pacemakers and other medical devices. Radio
waves may impair the operation of pacemakers and other medical devices
Safety Instructions
FAQ
Technical Specifications
© 2012 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered
trademarks of Creative Technology Ltd in the United States and/or other countries. iPod, iPhone, iPad and Mac are
trademarks of Apple, Inc., registered in the U.S. and other countries. The Bluetooth
®
word mark and logos are owned
by Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks
are the property of their respective owners and are hereby recognized as such. aptX is a trademark of CSR plc. All
other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are
subject to change without notice. Use of this product is subject to a limited warranty. Actual contents may differ slightly
from those pictured.
The following sections contain notices for various countries:
CAUTION: This product is intended for use with FCC/CE certified computer equipment. Please check the
equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm if your
equipment is suitable prior to the installation or use of the product.
Federal Communication Commission (FCC) Interference Statement Notice for USA FCC Part 15: This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this
device must be installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded. Operation with
non-certified computers or non-shielded cables may result in interference to radio or television reception.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the device.
Federal Communication Commission (FCC) Radiation Exposure StatementThis equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
California Proposition 65 Statement
WARNING: Handling this product may expose you to chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
Wash hands after handling.
Explanatory Note: California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65)
requires special product labeling for products containing certain chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm. Creative has chosen to provide a warning based on
its knowledge about the presence of one or more listed chemicals without attempting to evaluate the level of
exposure. With Creative’s products, the exposure may be below the Proposition 65 level of concern, or could
even be zero. However, out of an abundance of caution, Creative has elected to place the Proposition 65
warning on its products.
Déclaration de la Proposition 65 de la Californie AVERTISSEMENT: La manipulation de ce produit peut vous
exposer à des produits chimiques qui sont reconnus par l’État de la Californie comme pouvant provoquer le
cancer, des anomalies congénitales ou d’autres effets nuisibles à la reproduction.
Veuillez vous laver les mains après l’avoir manipuler.
Note explicative: La Proposition 65 (California Safe Drinking Water and Toxic Enforcement Act of 1986) de la
Californie sur les matières dangereuses et l’eau potable exige un étiquetage spécial pour les produits
contenant certains produits chimiques qui sont reconnus par l’État de la Californie comme pouvant de
Creative, le niveau d’exposition peut être inférieur au niveau critique établi par la Proposition 65 ou même être
nul. Néanmoins, par souci extrême de prudence, Creative a choisi de placer l’avertissement de la Proposition
65 sur ses produits.
Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de
classe B est conforme aux normes canadiennes NMB-003 et CNR-210.This device complies with Industry
Canada licence-exempt RSS standard. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, includinginterference that may cause undesirable
operation. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence.Son
Fonctionnement est soumis aux deux conditions suivantes :
(1)Le matériel ne peut étre source D’interférences et
(2)Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer un fonctionnement
indésirable.
CANADIAN CLASS B STATEMENT: This digital device does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital
Apparatus,” ICES-003 of the Department of Communications. Cet appareil numerique respecte les limites de
bruits radioelectriques applicables aux appareils numeriques de Classe B prescrites dans la norme sur le
materiel brouilleur: “Appareils Numeriques,” NMB-003 edictee par le ministre des Communications.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the device. Toute modification non approuvée explicitement par le fournisseur
de licence de l’appareil peut entraîner l’annulation du droit de l’utilisateur à utiliser l’appareil.
Regulatory Information
According to the FCC96 208 and ET95-19
Manufacturer / Importer’s Name :
Creative Labs, Inc.
Manufacturer / Importer’s Address :
1901 McCarthy Boulevard Milpitas,
CA. 95035 United States
Tel: (408) 428-6600
declares under its sole responsibility that the product
Trade Name : Creative
Model Numbers : MF8145
has been tested accordingly to the FCC/CISPR22
requirement for class B devices and found compliant
with the following standards:
EMI/EMC: ANSI C63.4, FCC Part 15 Subpart B & C
Complies with Canadian ICES-003 Class B & RSS-
210 Standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference
received, including interference that may cause
undesirable operation.
Ce matériel est conforme à la section 15 des régles
FCC. Son Fonctionnement est soumis aux deux
conditions suivantes:
1. Le matériel ne peut étre source D’interférences et
2. Doit accepter toutes les interférences reques, Y
compris celles pouvant provoquer un
fonctionnement indésirable.
Compliance Manager
Creative Labs, Inc.
October 25, 2012
DECLARATION OF CONFORMITY
FAQ
Turkey RoHS Statement
EEE Yönetmeligine Uygundur
Complies with
IDA Standards
DB00148
Notice for Singapore
Ukraine RoHS Statement
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання
деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого
постановою Кабінету Міністрів України від 3 грудня 2008 № 1057
Notice for Taiwan
Notice for Korea
Vietnam RoHS Statement
This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist Republic of
Vietnam (“Circular”), it does not contain the following substances in concentration greater than the Maximum Limit
value as specified in the Circular.
Substance Maximum Limit (ppm)
1, 2
● lead 1000
● mercury 1000
● cadmium 100
● hexavalent chromium 1000
● polybrominated biphenyls (PBB) 1000
● polybrominated diphenyl ethers (PBDE) 1000
1
Maximum Limit does not apply to applications exempted from the Circular.
2
Maximum Limit refers to concentration by weight in homogeneous materials.
Safety Instructions/Technical Specifications/FAQ
CS.
ES.
BP.
FR.
EN.
JP.
Consignes de sécurité/Caractéristiques techniques/FAQ
Instrucciones de seguridad/Especificaciones técnicas/Preguntas más frecuentes
安全使用说明/技术规格/常见问题
Instruções de segurança/Especificações técnicas/FAQ (Perguntas mais frequentes)
TR.
CT.
KO.
Güvenlik Talimatları/Teknik Özellikler/SSS
안전 지침/기술 사양/자주 묻는 질문
安全指示/技術規格/常見問題解答
Perform the following trouble-shooting steps before sending it for servicing. To download the user guide
or find out more information about our product, please refer to support.creative.com
Speaker FAQ
What are the indicators that indicate my Creative D5xm is Powered ON.
For the master speaker, the Volume LED indicator are lit when the Creative D5xm is powered ON.
This is the best indication your speaker is Powered ON.
For the linked LEFT, CENTER or Subwoofer, the speakers are in network standby when their LINK LEDs
are dimmed and brightly lit when they are Power ON and Linked up.
Is there any power saving features from the Creative D5xm?
Yes, the RIGHT Master speaker will enter standby automatically after more than 10 minutes of zero
activity from both, the Bluetooth* and AUX-IN** sources. It will also instruct other speakers and
subwoofer linked to the RIGHT master speaker to enter network standby mode to save power.
*
Power saving mode only applicable when no Bluetooth connection is detected for 10 minutes.
** Power saving mode only applicable when there is no audio on the AUX-IN input.
(Slave/Master*)
Center Speaker
(Master)
Right Speaker
(Slave)
Left Speaker
Not Configured
Link LED Status
Indicator
Bluetooth FAQ
There’s no Bluetooth link between my device and the Creative D5xm. What should I do?
- Delete the “Creative D5xm” or “Creative D5xm system” name entry from your Bluetooth device paired
memory list and perform the steps in (Pairing a smart device with your speaker in the Quick Start
Guide) to re-pair your device with Creative D5xm.
- Position them within 1 meter or closer to each other if you experience pairing difficulties
- Ensure that both your Bluetooth device and Creative D5xm are not connected to any other devices
Bluetooth link is established and paired between the devices but there’s no music. What should I do?
With some built-in Bluetooth Stereo enabled computers, 3rd party USB Bluetooth dongles or other
devices, you may be required to manually specify/ setup the audio output as Creative D5xm, e.g.,
(under sound and audio devices section on your computer’s operating system) Please consult your
manufacturer’s documentation for further information
LINK Tips and Tricks
How to identify which speaker is the LEFT, CENTER, RIGHT speaker.
*
For a 1.1 setup, the Creative D5xm will light up the Center Speaker LED to indicate it is connected in a 1.1 setup.
My LEFT and CENTER Channel D5xm does not respond to my actions on either buttons or
Bluetooth connections when they are in LINK mode.
• This is normal. The D5xm Left and center Channels are in slave mode does not respond to any
button (except the Power ON/Standby to reset the speaker) as they are receiving cues from the
RIGHT Master speaker. This includes Bluetooth connection, AUX-IN input and the Volume
Touchpad.
Can I add more speakers or remove speakers from a 2.1 Setup?
Yes you can. However you would need to clear the link system on all the speakers and subwoofer
and re-link them again. Please refer to the section on “Important! Before you add more speakers
or subwoofer without any Creative Central app.” to reconfigure your system again.
I cannot re-connect my speakers together. All that is shown is all the LEDs blinking in unison
and going off after 1 minute. What should I do?
This is an error indicator to indicate that one of the links are not present in the defined previous
setup.
There are 2 ways to troubleshoot.
a) Power ON all your speakers and press the LINK TouchPad / Button again to attempt to link
the speakers together. Ensure that the Subwoofer have their mains Powered ON.
b) Return to factory default settings to clear Link system configuration for all your speakers and
subwoofer involved and re-link them again.
Notes
*Refer to your
Bluetooth
device (notebook
1
, PC
1
, mobile device
2
) manufacturer’s
documentation/website for supported profiles.
1
Compatible with PC (Windows XP/Vista/7), Apple Macintosh equipped with
Bluetooth
wireless stereo
2
Compatible with most major brands of
Bluetooth
A2DP enabled mobile phones and A2DP
enabled mobile phones (including iPhone
3
, Windows Mobile)
3
Original iPhone built in
Bluetooth
not supported
Signature Series S i g n a t u r e S e r i e s
Notice for Japan
5.2GHz 5.3GHz
5.2GHz band and 5.3GHz band is restricted to indoor use by JRL.
-
1
dans d''autres langues
- English: Creative D5xm User manual
Documents connexes
-
Creative SOUND BLASTER TACTIC3D OMEGA WIRELESS Déclaration de conformité
-
-
-
-
-
-
-
-
-
Creative T3150 Guide de démarrage rapide
