DE 3361
5019 100 75091
PRODUCT DESCRIPTION SHEET
1.
Control panel.
2.
Grease filters (behind the extractor grille).
3.
Lighting unit.
4.
Pull-out steam deflector.
MAINTENANCE...
(refer also to “USER INSTRUCTIONS” manual).
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a - Fig. 1
).
3.
Open the extractor grille (
b, c - Fig. 1
).
... of the grease filter:
4.
Remove the grease filter fixing device
(
d - Fig. 3
).
5.
Remove the dirty grease filter. After replacing
or cleaning the grease filter (according to the
model) remount in reverse order, making
sure the entire extraction surface is covered.
... of the carbon filter (Fig. 4):
4. Mounting:
fit the carbon filter over the motor
protection grille.
Line up the plastic reference tab (
e - Fig. 4
)
on the carbon filter with the reference mark
on the fan shroud (
f - Fig. 4
) and turn
clockwise until it locks.
5. Removing/replacing:
turn the carbon filter
anticlockwise.
... of the bulb:
4.
Remove the burnt-out bulb and fit a new one.
5.
Use 40W max E14 bulbs only.
On completion of maintenance operations,
remount the extractor grille!
CONTROL PANEL
A.
Speed selector.
B.
Light switch.
With the speed selected, opening the steam
deflector switches on the hood. Closing the
steam deflector switches off the hood.
a
b
b
c
1
4
2
Fig. 1
3
A
B
medium amount
of steam and fumes
small amount
of steam and fumes
large amount of
steam and fumes
Fig. 2
d
Fig. 3
f
e
Fig. 4
FGB