Dometic RPD50 Mode d'emploi

RPD50

Compressor refrigerator

Installation and Operating Manual. . . . . . . . 6

Kompressor-Kühlschrank

Montage- und Bedienungsanleitung . . . . .24

Réfrigérateur à compression

Instructions de montage

et de service . . . . . . . . . . . . . . . . . . . . . . . . .42

Compressorkoelkast

Montagehandleiding en

gebruiksaanwijzing . . . . . . . . . . . . . . . . . . .62

EN

DE

FR

ESNL

REFRIGERATION

COOLMATIC

RPD50-IO-West.book Seite 1 Mittwoch, 29. Januar 2020 6:22 18

RPD50-IO-West.book Seite 2 Mittwoch, 29. Januar 2020 6:22 18

RPD50

3

1

2

1

4

3

2

min. 50 mm

min. 30 mm

RPD50-IO-West.book Seite 3 Mittwoch, 29. Januar 2020 6:22 18

RPD50

4

123

3

4

1

3

2

5

4

1

2

4

3

5

RPD50-IO-West.book Seite 4 Mittwoch, 29. Januar 2020 6:22 18

RPD50

5

6

12 3

4

5

br bl rt sw rt rt sw

bl br

6

Ø/mm²

l/m

12 V

24 V

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28

0

2

6

10

14

7

RPD50-IO-West.book Seite 5 Mittwoch, 29. Januar 2020 6:22 18

EN

Explanation of symbols RPD50

6

Please read this manual carefully before starting the device. Keep it in a

safe place for future reference. If the device is passed on to another

person, this manual must be handed over to the user along with it.

The manufacturer cannot be held liable for damage resulting from improper usage

or incorrect operation.

Contents

1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6 Setting up and connecting the refrigerator . . . . . . . . . . . . . . . . . . . . . . . . . .12

7 Using the refrigerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

8 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

9 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

10 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

11 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1 Explanation of symbols

D

!

DANGER!

Safety instruction: Indicates a hazardous situation that, if not avoided,

will result in death or serious injury.

WARNING!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

RPD50-IO-West.book Seite 6 Mittwoch, 29. Januar 2020 6:22 18

EN

RPD50 Safety instructions

7

!

A

I

2 Safety instructions

The manufacturer accepts no liability for damage in the following cases:

• Damage to the product resulting from mechanical influences and incorrect

connection voltage

• Alterations to the product without express permission from the manufacturer

• Use for purposes other than those described in the operating manual

2.1 General safety

D

DANGER! Failure to obey these warnings will result in death or

serious injury.

Electrocution hazard

• On boats: If the device is powered by the mains, ensure that the

power supply has a residual current circuit breaker.

!

WARNING! Failure to obey these warnings could result in death

or serious injury.

Electrocution hazard

• Installations in washrooms and areas exposed to water, must be

performed by a qualified technician.

• Do not operate the device if it is visibly damaged.

• If this device's power cable is damaged, it must be replaced by the

manufacturer, customer service or a similarly qualified person in order

to prevent safety hazards.

• This device may only be repaired by qualified personnel. Inadequate

repairs may cause serious hazards.

CAUTION!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

NOTICE!

Indicates a situation that, if not avoided, can result in property damage.

NOTE

Supplementary information for operating the product.

RPD50-IO-West.book Seite 7 Mittwoch, 29. Januar 2020 6:22 18

EN

Safety instructions RPD50

8

Health hazard

• This device can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or

instruction concerning use of the device in a safe way and understand

the hazards involved.

• Children shall not play with the device.

• Cleaning and user maintenance shall not be made by children without

supervision.

• Children aged from 3 to 8 years are allowed to load and unload

refrigerating devices.

Explosion hazard

• Do not store any explosive substances, such as spray cans with

propellants, in the device.

!

CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Risk of crushing

• Do not put your fingers into the hinge.

Health hazard

• Foodstuff may only be stored in its original packaging or in suitable

containers.

A

NOTICE! Damage hazard

• Check that the voltage specification on the type plate is the same as

that of the power supply.

• Never pull the plug out of the socket by the connection cable.

• If the device is connected to the DC socket: Disconnect the device

and other electric consumers from the battery before connecting the

quick charging device.

• If the device is connected to the DC socket: Disconnect the device or

switch it off when you turn off the engine. Otherwise you may dis-

charge the battery.

• The device is not suitable for storing substances which are caustic or

contain solvents.

• Keep the drainage outlet clean at all times.

• Do not open the refrigerant circuit under any circumstances.

RPD50-IO-West.book Seite 8 Mittwoch, 29. Januar 2020 6:22 18

EN

RPD50 Safety instructions

9

• Never transport the device in a horizontal position, so that no oil can

leak out of the compressor.

• Make sure that the refrigerant circuit is not damaged during transpor-

tation. The refrigerant in the refrigerant circuit is highly flammable.

In the event of any damage to the refrigerant circuit:

– Avoid naked flames and sparks.

– Air the room well.

• Set up the device in a dry location where it is protected against splash-

ing water.

2.2 Operating the device safely

D

DANGER! Failure to obey these warnings will result in death or

serious injury.

Electrocution hazard

• Do not touch exposed cables with your bare hands. This applies

especially when operating the device from the AC mains.

!

CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Electrocution hazard

• Before starting the device, ensure that the power supply line and the

plug are dry.

Health hazard

• Opening the door for long periods can cause significant increase of

the temperature in the compartments of the device.

• Clean regularly surfaces that can come in contact with food and

accessible drainage systems.

• Store raw meat and fish in suitable containers in the device, so that it is

not in contact with or can drip onto other food.

• If the device is left empty for long periods:

– Switch off the device.

– Defrost the device.

– Clean and dry the device.

– Leave the door open to prevent mould developing within the

device.

RPD50-IO-West.book Seite 9 Mittwoch, 29. Januar 2020 6:22 18

EN

Scope of delivery RPD50

10

A

NOTICE! Damage hazard

• Do not use electrical devices inside the cooling device unless they are

recommended by the manufacturer for that purpose.

• Do not place it near naked flames or other heat sources (heaters, direct

sunlight, gas ovens etc.)

• Danger of overheating!

Always ensure sufficient ventilation so that the heat generated during

operation can dissipate. Make sure that the device is sufficiently far

away from walls and other objects so that the air can circulate.

• Ensure that the ventilation vents are not covered.

• Do not fill the inner container with ice or fluid.

• Never immerse the device in water.

• Protect the device and the cable against heat and moisture.

• Make sure that foodstuffs do not touch the walls of the cooling area.

3Scope of delivery

3.1 Accessories

Available as accessory (not included in scope of delivery):

Quantity Description

1 Refrigerator

1 Instruction manual

Description Ref. no.

Rectifier EPS100 EPS-100W

Rectifier MPS35 MPS-35

RPD50-IO-West.book Seite 10 Mittwoch, 29. Januar 2020 6:22 18

EN

RPD50 Intended use

11

4 Intended use

The refrigerator is suitable for cooling and freezing foodstuffs. The device is also suit-

able for use on boats.

!

5 Technical description

The CoolMatic RPD50 refrigerator is suitable for use with a 12 V or 24 V DC voltage

and can therefore also be used for camping or on boats. It can also be connected to

a 230 V mains supply via the EPS100W and MPS35 rectifiers.

When used on boats the refrigerator can be subjected to a short-term inclination

of 30°.

The refrigerator can chill products and keep them cool. Products can be deep-frozen

in the freezer compartment.

All materials used in the refrigerator are compatible for use with foodstuffs.

You can use the continuously variable thermostat to set the desired temperature.

5.1 Control elements

CAUTION! Health hazard!

Please check if the cooling capacity of the device is suitable for storing

the food or medicine you wish to cool.

No. in fig. 1,

page 3

Explanation

1 Temperature controller

RPD50-IO-West.book Seite 11 Mittwoch, 29. Januar 2020 6:22 18

EN

Setting up and connecting the refrigerator RPD50

12

6 Setting up and connecting the

refrigerator

6.1 Setting up the refrigerator

In continuous operation, the air humidity may not exceed 90 %.

Set up the refrigerator in a dry, sheltered place. Avoid placing it near heat sources

such as radiators, gas ovens or hot water pipes. Do not let it stand in the full sun.

The refrigerator must be positioned so that heated air can dissipate easily. Therefore

make sure there is adequate ventilation (fig. 2, page 3).

6.2 Removing the transport protection

The refrigerator has a locking mechanism to protect it during transport. The follow-

ing settings are possible:

• Position 1 (transport lock): (fig. 3 1, page 4) The door is locked and secured. To

open the door, turn the bolt to position 2.

• Position 2: (fig. 3 2, page 4) The door can be opened.

• Position 3 (VENT position): (fig. 3 3, page 4) The door is slightly open, but

fixed. Use this position, for example, if you are not going to use the device for a

long time.

No. in fig. 2,

page 3

Explanation

1 Hot waste air

2 Cold intake air

3 Condenser

4 With cover panel 50 mm above

RPD50-IO-West.book Seite 12 Mittwoch, 29. Januar 2020 6:22 18

EN

RPD50 Setting up and connecting the refrigerator

13

6.3 Changing the door hinge

You can also change the hinge of the door, so that it opens to the left rather than the

right.

To change the door hinge, proceed as follows (fig. 4, page 4):

➤ Remove the upper door hinge (fig. 4 1, page 4).

➤ Carefully lift out the door.

➤ Remove the threaded pins (fig. 4 2, page 4).

➤ Pull the locking hook (fig. 4 3, page 4) off the rod.

➤ Remove the locking plate (fig. 4 4, page 4) and fit it on the opposite side.

➤ Pull the rod downwards and out and put it in the other side.

➤ Fasten the locking hook (fig. 4 3, page 4) back on the rod.

➤ Detach the top and bottom lock holders (fig. 4 5, page 4) on the left side.

➤ Detach the top and bottom door hinges (fig. 4 1, page 4) on the right side.

➤ Fasten the top and bottom door hinges (fig. 4 1, page 4) to the left side.

➤ Fasten the top and bottom lock holders (fig. 4 5, page 4) to the left side.

6.4 Changing the decorative plate

You can change the decorative plate on your refrigerator to improve the appear-

ance.

This is how to change the decorative plate:

➤ Remove the screws 1 and 3 (fig. 5 1 and 3, page 4).

➤ Remove components 2 and 4 (fig. 5 2 and 4, page 4).

➤ Pull down the old decorative plate out of the door frame.

Caution: there is a risk of injury!

➤ Put the new decorative plate in the door frame.

➤ Fit the components 2 and 4 (fig. 5 2 and 4, page 4) back on the device.

➤ Fasten the screws 1 and 3 (fig. 5 1 and 3, page 4).

RPD50-IO-West.book Seite 13 Mittwoch, 29. Januar 2020 6:22 18

EN

Setting up and connecting the refrigerator RPD50

14

6.5 Connecting the refrigerator

For the electrical connection, please refer to the wiring diagram (fig. 6, page 5):

Cable colours

No. in

fig. 6,

page 5

Meaning

1 Electronic terminal rail

2 Compressor

3 DC fan (if present)

4 Interior lighting

5 Voltage controller for interior lighting (only on devices with interior lighting)

6 Mechanical thermostat

No. in

fig. 7,

page 5

Meaning

br Brown

gn Green

rt Red

sw Black

ws White

bl Blue

RPD50-IO-West.book Seite 14 Mittwoch, 29. Januar 2020 6:22 18

EN

RPD50 Setting up and connecting the refrigerator

15

Connecting to a battery

The refrigerator can be operated with a 12 Vg to 24 Vg voltage supply.

A

➤ Determine the required cross section of the cable in relation to the cable length

according to fig. 7, page 5.

Key for fig. 7, page 5

A

➤ Before starting up the device for the first time, check whether the

operating voltage and the battery voltage correspond (see type plate).

➤ Connect the refrigerator

– As directly as possible to the pole of the battery or

– To a plug socket which is fused with at least 15 A (at 12 V) or 7.5 A (at 24 V).

A

NOTICE!

To avoid voltage loss and therefore a drop in performance, the cable

should be kept as short as possible and should not be interrupted if this

is possible.

For this reason avoid additional switches, plugs or power strips.

Co-ordinate axis Meaning Unit

l Cable length m

∅ Cable cross section mm²

NOTICE!

Make sure that the polarity is correct.

NOTICE!

Disconnect the cooling device and other power consuming devices

from the battery before connecting the battery to a quick charging

device.

Overvoltage can damage the electronics of the device.

RPD50-IO-West.book Seite 15 Mittwoch, 29. Januar 2020 6:22 18

EN

Using the refrigerator RPD50

16

For safety reasons the refrigerator is equipped with an electronic system to prevent

the polarity being reversed. This protects the refrigerator against reversed polarity

when connecting to a battery and against short circuiting. To protect the battery, the

refrigerator switches off automatically if the voltage is insufficient (see table below).

Connecting to 230 V mains supply

D

A

➤ To operate the refrigerator on the 230 V mains, use the EPS100W or MPS35

rectifier.

7 Using the refrigerator

I

12 V 24 V

Switch-off voltage

10,4 V 22,8 V

Switch-on voltage

11,7 V 24,2 V

DANGER!

Never handle plugs and switches with wet hands or if you are standing

in a puddle.

NOTICE!

• If you are operating your refrigerator on board a boat with a mains

connection of 230 V from the land, you must install a ground

protection circuit breaker between the 230 V mains supply and the

refrigerator.

Seek advice from a trained technician.

• When a refrigerator is connected with a factory-supplied

110 – 240 V connection line, the AC mains supply used must be fit-

ted with a 4-amp fuse in phase (L).

NOTE

Before starting your new refrigerator for the first time, you should clean

it inside and outside with a damp cloth for hygienic reasons (please also

refer to the chapter “Cleaning and maintenance” on page 19).

RPD50-IO-West.book Seite 16 Mittwoch, 29. Januar 2020 6:22 18

EN

RPD50 Using the refrigerator

17

7.1 Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.

• Allow warm food to cool down first before placing it in the device to keep cool.

• Do not open the refrigerator more often than necessary.

• Do not leave the doors open for longer than necessary.

• Defrost your refrigerator as soon as a layer of ice forms.

• Avoid unnecessarily low temperature settings.

• Clean dust and dirt from the condenser at regular intervals.

7.2 Using the refrigerator

The fridge conserves fresh foodstuffs. The freezer compartment conserves frozen

foodstuffs and freezes fresh foodstuffs.

A

➤ Switch the refrigerator on by turning the knob (fig. 1 A, page 3) to the right.

I

Setting the temperature

You can set the temperature to any level using the knob. The built-in thermostat reg-

ulates the temperature as follows:

• min. (left limit) = warmest setting

• max. (right limit) = coldest setting

NOTICE!

• Ensure that food or liquids in glass containers are not excessively

refrigerated.

Liquids expand when they freeze and can thus destroy the glass con-

tainers.

• Food may only be stored in its original packaging or in suitable con-

tainers.

• Ensure that the objects placed in the refrigerator are suitable for cool-

ing to the selected temperature

NOTE

After switching on, the refrigerator requires approx. 60 s until the com-

pressor starts up.

RPD50-IO-West.book Seite 17 Mittwoch, 29. Januar 2020 6:22 18

EN

Using the refrigerator RPD50

18

I

Conserving foodstuffs

You can conserve foodstuffs in the refrigerator compartment. The time for which the

food can be conserved in this way is usually stated on the package.

A

I

The refrigerator compartment is divided in different zones with different tempera-

tures:

• The colder zones are immediately over the drawers for fruit and vegetables near

the back wall.

• Observe the temperature information and best before date on the food

packaging.

➤ Observe the following when using the device:

– Do not re-freeze products which are defrosting or have been defrosted,

consume them as soon as possible.

– Wrap food in aluminium foil or cling film and shut in in a suitable box with a lid.

This ensures that aromas, the shape and the freshness are better conserved.

Defrosting the refrigerator

Humidity can form frost in the interior of the refrigerator or on the vaporiser. This

reduces the cooling capacity. Defrost the device in good time to avoid this.

A

To defrost the refrigerator, proceed as follows:

NOTE

The cooling capacity can be influenced by

• The ambient temperature

• The amount of food to be conserved

• The frequency with which the door is opened.

NOTICE!

Do not conserve warm food in the refrigerator compartment.

Do not place glass containers with liquid in the freezer compartment.

NOTE

Food which can easily absorb tastes and odours and liquids and

products with a high alcohol content should be conserved in air-tight

containers.

NOTICE!

Never use hard or pointed tools to remove ice or to loosen objects

which have frozen in place.

RPD50-IO-West.book Seite 18 Mittwoch, 29. Januar 2020 6:22 18

EN

RPD50 Cleaning and maintenance

19

➤ Take out the contents of the refrigerator.

➤ Place them in another cooling device to keep them cool, if necessary.

➤ Set the knob to “0”.

➤ Leave the door open.

➤ Wipe off the water resulting from defrosting or – if present – empty the collecting

tray. If your device has a water drain, drain the thawed water off.

Switching off and storing the refrigerator

If you do not intend to use the refrigerator for a long time, proceed as follows:

➤ Turn the knob to “0”.

➤ Disconnect the power cable from the battery or pull the DC cable plug out of the

rectifier.

➤ Clean the refrigerator (see chapter “Cleaning and maintenance” on page 19).

➤ Put the lock in the VENT position.

This prevents odours from building up.

Securing the refrigerator door

You can prevent the refrigerator door from being opened inadvertently.

➤ Put the locking mechanism on the top of the door to position 1

(fig. 3 1, page 4).

8 Cleaning and maintenance

!

A

WARNING! Electrocution hazard

Always disconnect the refrigerator from the mains before you clean and

service it.

NOTICE! Damage hazard

• Do not use abrasive cleaning agents or hard objects during cleaning

as these can damage the refrigerator.

• Never use hard or sharp tools to remove ice or to free objects frozen

onto the device.

• Do not use any mechanical tools or any other tools to speed up the

defrosting process.

RPD50-IO-West.book Seite 19 Mittwoch, 29. Januar 2020 6:22 18

EN

Guarantee RPD50

20

➤ Clean the refrigerator regularly and as soon as it becomes dirty with a damp

cloth.

➤ Make sure that no water drips into the seals. This can damage the electronics.

➤ Wipe the refrigerator dry with a cloth after cleaning.

➤ Check the condensate drain regularly.

Clean the condensate drain when necessary. If it is blocked the condensate

collects on the bottom of the refrigerator.

9Guarantee

The statutory warranty period applies. If the product is defective, please contact the

manufacturer's branch in your country (see back page) or your retailer.

For repair and warranty processing, please include the following documents when

you send in the device:

• A copy of the receipt with purchasing date

• A reason for the claim or description of the fault

10 Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever

possible.

M

If you wish to finally dispose of the product, ask your local recycling centre

or specialist dealer for details about how to do this in accordance with the

applicable disposal regulations.

RPD50-IO-West.book Seite 20 Mittwoch, 29. Januar 2020 6:22 18

La page charge ...

Dometic RPD50 Mode d'emploi

Dometic RPD50 Mode d'emploi

dans d''autres langues

Documents connexes