Versamatic 1.012-051.0 Operating Instructions Manual

Read these instructions before using the machine.

86359530-G

03/19/13

Operating instructions (ENG)

MODELS: 1.012-050.0

VS14

1.012-051.0

VS18

120V

286359530 VERSAMATIC 14 & 18

Machine Data Label

Warranty Registration

Thank you for purchasing a Windsor product. Warranty registration is quick and easy.

Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to:

www.windsorind.com/WarrantyRegistration.aspx

For customer assistance:

1-800-444-7654

3

Table of Contents

Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3

How To Use This Manual . . . . . . . . . . . . . . . . . . . 4

Safety

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 5

GROUNDING INSTRUCTIONS . . . . . . . . . . . . . . 6

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . 7

Operations

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Assembling The Vacuum Cleaner . . . . . . . . . . . . 8

Attaching Suction Hose. . . . . . . . . . . . . . . . . . . . . 8

Swivel Neck Latch. . . . . . . . . . . . . . . . . . . . . . . . . 9

Power Head On . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Brush Controller . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Filter Level Indicator . . . . . . . . . . . . . . . . . . . . . . . 9

Maintenance

Changing The Paper Bag . . . . . . . . . . . . . . . . . . 10

Changing Filters . . . . . . . . . . . . . . . . . . . . . . . . . 10

Clearing Blockages . . . . . . . . . . . . . . . . . . . . . . . 11

Changing The Brush Strip. . . . . . . . . . . . . . . . . . 11

Removing the Switch Housing Cover . . . . . . . . . 12

Removing The Dust Bag Housing. . . . . . . . . . . . 12

Replacing The Vacuum Motor . . . . . . . . . . . . . . 13

Changing The Brush Roller. . . . . . . . . . . . . . . . . 13

Removing The Brush Roller Pulley . . . . . . . . . . . 13

Removing The Swivel Neck . . . . . . . . . . . . . . . . 14

Removing The Swivel Neck Cover . . . . . . . . . . . 14

Changing The Electronic Controller . . . . . . . . . . 14

Replacing the Foot Pedal . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 16

Technical Data VS 14 (VS 18) . . . . . . . . . . . . . . 16

Parts

Tools, Bags & Filters. . . . . . . . . . . . . . . . . . . . . . 18

Upper Housing . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Power Head-VS 14 . . . . . . . . . . . . . . . . . . . . . . . 22

Power Head-VS 18 . . . . . . . . . . . . . . . . . . . . . . . 24

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 26

86359530 VERSAMATIC 14 & 18

4

How To Use This Manual

This manual contains the following sections:

• How to Use This Manual

•Safety

• Operations

• Maintenance

•Parts List

The HOW TO USE THIS MANUAL section will tell

you how to find important information for ordering

correct repair parts.

Parts may be ordered from authorized dealers. When

placing an order for parts, the machine model and

machine serial number are important. Refer to the

MACHINE DATA box which is filled out during the

installation of your machine. The MACHINE DATA

box is located on the inside of the front cover of this

manual.

The model and serial number of your machine is

located on the bottom-back of the machine.

The SAFETY section contains important information

regarding hazardous or unsafe practices of the

machine. Levels of hazards are identified that could

result in product damage, personal injury, or severe

injury resulting in death.

The OPERATIONS section is to familiarize the

operator with the operation and function of the

machine.

The MAINTENANCE section contains preventive

maintenance to keep the machine and its compo-

nents in good working condition. They are listed in

this general order:

• Dust Bag

• Filters

• Blockage

•Brush strips

• Troubleshooting

The PARTS LIST section contains assembled parts

illustrations and corresponding parts list. The parts

lists include a number of columns of information:

•REF – column refers to the reference number

on the parts illustration.

•PART NO. – column lists the part number for

the part.

•PRV NO. – reference number.

•DESCRIPTION – column is a brief descrip-

tion of the part.

•NOTES – column for information not noted by

the other columns.

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement

parts numbers needed for ordering future parts.

NOTE: The manual part number is located on the

lower left corner of the front cover.

Model:

Date of Purchase:

Serial Number:

Dealer:

Address:

Phone Number:

Sales Representative:

86359530 VERSAMATIC 14 & 18

5

Safety

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not use near small children. Do not allow to be used as a toy. Close attention is necessary when used by

or near children.

4. Use only as described in this manual. Use only manufacturer's recommended attachments.

5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water, return it to a service center.

6. Do not pull or carry by the cord, use cord as a handle, close a door on cord, or pull cord around sharp edges

or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

8. Do not handle plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and

anything that may reduce air flow.

10. Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts. Do not place

fingers or other body parts under vacuum unless unplugged.

11. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

12. Do not use without dust bag and/or filters in place. Do not wash filters.

13. Turn off all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may

have been present.

16. Machines can cause fire when operated near flammable vapors or materials. Do not operate this machine

near flammable fluids, dust or vapors.

17. Maintenance and repairs must be done by qualified personnel.

18. Connect to a properly grounded outlet only. See Grounding Instructions.

19. Do not use machine as a step.

20. If used on plush carpet or carpet with thick padding, do not leave machine in one place with machine turned

on.

21. Do not use the handle in the dust bag housing to carry the machine.

READ AND SAVE THESE INSTRUCTIONS

86359530 VERSAMATIC 14 & 18

6

Safety

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least

resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having

an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet

that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a

qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not

modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified

electrician.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illus-

trated in sketch A. A temporary adaptor looks like adaptor illustrated in sketches B and C, may be used it

connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The

temporary adaptor should be used only until a properly grounded outlet (sketch A) can be installed by a qualified

electrician. The green colored rigid ear, lug or the like extending from the adaptor must be connected to a

permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held

in place by a metal screw.

Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.

86359530 VERSAMATIC 14 & 18

GROUNDING

GROUNDED

OUTLET ADAPTER

METAL SCREW TAB FOR

GROUNDING SCREW

GROUNDED

OUTLET BOX

(A) (B) (C)

7

Safety

IMPORTANT SAFEGUARDS

Accidents due to misuse can only be prevented by those using the machine. To guard against injury, basic

safety precautions should be observed, including the following:

Read and follow all safety instructions.

Electric shock could occur if used outdoors or on wet surfaces.

The vacuum cleaner is designed to be safe when used to perform cleaning functions. Should damage occur to

electrical or mechanical parts, cleaner should be repaired by a competent service center before using in order to

avoid further damage to machine or physical injury to user.

A damaged power cord could cause electrical shock and/or fire. To minimize this possibility observe the

following precautions:

Do not run cleaner over power cord.

Avoid closing doors on power cord pulling it around sharp edges, or placing sharp-edged objects upon it.

Wind cord no tighter than is necessary to retain it on the cord hooks.

When disconnecting power cord from electrical outlet, grasp the plug. Pulling it out by the cord itself can

damage cord insulation and internal connections to plug.

Your vacuum cleaner creates suction and contains a revolving brush. To avoid bodily injury from suction or

moving parts, vacuum cleaner brush should not be placed against, or in close proximity of loose clothing,

jewelry, hair or body surfaces while cleaner is connected to electrical outlet. Cleaner should not be used to

vacuum clothing while it is being worn. Keep children away from machine when in operation or plugged in.

If used on plus carpet or carpet with thick padding, turn off unit when handle is in upright position. When using

accessory tools, keep floor bush off carpet by keeping handle in locked position and lowering handle with on

hand to raise bush off floor. Operate accessories with other hand.

Always plug your cleaner into a standard wall outlet. Use of extension cord or light socket with inadequate

current-carry capacity could result in electric shock or fire hazard.

Disconnect cleaner from electrical outlet before servicing, such as changing bags or belts. You could receive

bodily injury from moving parts of machine should switch accidentally turned on. Disconnect cleaner from elec-

trical outlet before detaching power head.

Do not use your vacuum cleaner in areas where flammable and/or explosive vapor or dust is present to avoid

possibility of fire or explosion. Some cleaning fluids can produce such vapors. Areas on which cleaning fluids

have been used should be completely dry and thoroughly aired before being vacuumed.

To avoid fire hazard, do not pick up matches, fireplace ashes, or smoking material with cleaner.

Keep your work area well lighted to avoid picking up harmful materials (such as liquids, sharp objects, or burning

substances) and avoid tripping accidents.

Use care when operating the cleaner on irregular surfaces such as stairs, as falling cleaner could cause bodily

injury and/or mechanical damage. Proper storage of machine in an out-of-way area immediately after use will

also prevent accidents caused by tripping over cleaner.

Store your vacuum indoors in a cool, dry area not exposed to the weather to avoid electrical shock and/or

cleaner damage.

Exercise strict supervision to prevent injury when using vacuum cleaner near children or when child is allowed

to operate vacuum cleaner. Do not allow children to play with vacuum cleaner and never leave cleaner plugged

in and unattended.

SAVE THESE INSTRUCTIONS

86359530 VERSAMATIC 14 & 18

8

Operations

Components

1. Vacuum motor housing

2. Dust bag housing

3. Suction hose

4. On-off switch

5. Cables cleats

6. Carrying recess

7. Back cover

8. Power head

Assembling The Vacuum Cleaner

Hold the vacuum motor housing in the vertical

position and insert into the power head. Locate the

line (13) on the motor housing accurately opposite

the rib on the swivel neck (14). The locking catch (15)

must be turned to the left during the locating. Secure

the vacuum section in place by turning the locking

catch to the vertical position.

Attaching Suction Hose

Push the black end of the hose into the connecting

tube (12) so that it clicks into place.

To disconnect the hose, press the sides of the

retaining ring (11) and pull the hose out of tube.

86359530 VERSAMATIC 14 & 18

13

14

15

12

11

5

2

1

7

3

8

6

4

9

Operations

Swivel Neck Latch

To release the machine from the upright position

depress the foot pedal (16).

Power Head On

Power head motor stops automatically when hand

nozzle (17) is withdrawn and restarts automatically

when reinserted. If power head does not start, check

that hand nozzle is fully inserted.

Brush Controller

The electronic brush controller monitors the operation

of the brush.

Green light: Brush correctly set and running.

Green light and red: Adjust the brush setting by

turning the pile adjustment knob (19) to a lower

number.

Red blinking light: The brush has become blocked

and is not turning. Switch off. Unplug from the outlet

and clear the blockage.

Filter Level Indicator

If warning light (18) comes on check:

a) Is the dust bag full?

b) Is there a blockage in the hose or power head?

86359530 VERSAMATIC 14 & 18

16

2

19

18

17

10

Maintenance

Unplug machine from electrical outlet before

doing any maintenance.

Changing The Paper Bag

To change the dust bag: Remove back cover. Push

down lever (20). Lower dust bag from connecting

tube. Close aperture of dust bag top with cardboard

cover (21 A). To fit new dust bag: Insert top of dust

bag (21) into slot (22). Push lever (20) down and fit

aperture of dust bag top over connecting tube. Return

lever so that it is in horizontal position.

Changing Filters

Motor filters (23) Replace after 20 filter bags have

been used.

Exhaust filter (24) - Change when it becomes dirty.

Press the button (25) and pull the filter forwards. To

insert a new filter, locate the filter into the motor

housing and push up until the button (25) engages

into place.

NOTE: Hospital grade filters are available.

86359530 VERSAMATIC 14 & 18

24

2

25

23

20

21

21A

22

11

Maintenance

Clearing Blockages

If the bag-full warning light shows before the dust bag

is full, check for blockages. Release the hose by

squeezing the tabs of the retaining ring (11). Reverse

the hose and put the wand-end into the connecting

tube (12). Remove the obstruction by switching on the

machine, holding the hose upright. If necessary

rapidly lift your hand on and off the end of the hose.

NOTE: Never use a stick or sharp object to clear the

hose.

Check for blockage in the swivel neck of the power

head and under the orange trap door (33) located on

the bottom of the power head.

Check the passage between the two openings in the

power head for blockage also.

Changing The Brush Strip

To replace brush strip, push button (32), remove the

side plate (26) and rotate the brush so that the brush

strip (27) can be pulled out of the opening. Ensure

that the new brush strip is fully inserted, then press

the side plate back into place.

NOTE: Ensure plate is locked in place.

86359530 VERSAMATIC 14 & 18

33

26 26a

32

11

12

11

12

Maintenance

Maintenance and repairs must be done by

qualified personnel.

To reduce risk of electric shock unplug before

cleaning or servicing.

Removing the Switch Housing Cover

Remove the three screws then lift cover off. Circuit

board (33) can be removed by loosening screw (32).

Removing The Dust Bag Housing

Remove the back cover, then remove the 4 screws

(2). Carefully lift the dust bag housing off the power

head.

NOTE: The power cord remains attached between

the dust bag housing and the power head.

86359530 VERSAMATIC 14 & 18

2

1

32

33

3 Wire

13

Maintenance

Replacing The Vacuum Motor

First detach the two black wires from the terminal

block. When replacing, ensure that the motor support

is fully located onto the motor cover. The motor cover

should then be firmly located onto the vacuum motor

and the motor, with its cover and support, firmly

seated into position as shown in the vacuum motor

housing.

When properly seated the motor cannot be turned.

Replace motor seal.

Changing The Brush Roller

Push button (32), remove the side plate (26) and

remove the four (VS14) or five (VS18) screws (27)

from underneath the chassis. The cover and the

button (32) can then be lifted off.

Push the belt (29) off the motor pulley (30), remove

the bumper (41).

Remove the three screws (27) from the brush bearing

blocks (42 & 43). Lift the bearing blocks out and

replace the brush roller.

Removing The Brush Roller Pulley

Hold the roller in one hand and turn the pulley (31) in

a clockwise direction.

To remove the motor pulley (30) insert a screwdriver

into a groove and give a light tap in a counterclock-

wise direction. The loosened pulley can then be

removed.

86359530 VERSAMATIC 14 & 18

27

26

32

27

29

30

41

42

43

31

30

14

Maintenance

Removing The Swivel Neck

To remove the swivel neck (35) remove the two small

screws (36) from the swivel neck supports (37) then

lift the swivel neck assembly from the chassis.

NOTE: On re-assembly ensure that the wires from

the swivel neck are not trapped when the power

head cover is replaced.

Removing The Swivel Neck Cover

Remove the retaining screw (38), slide the cover (39)

downwards then lift out.

NOTE: On re-assembly check that the leads do not

become trapped.

Changing The Electronic Controller

Disconnect the lead from the motor. Lift the controller

(34) upwards from the motor. Lift the controller

upwards from the swivel neck.

86359530 VERSAMATIC 14 & 18

36

X

36

37

35

37

34

X

38 39

15

Maintenance

Replacing the Foot Pedal

Remove the power head from the upper housing.

Remove the cover from the power head and the

retaining screw. Insert a screw driver in the notch on

the axle and slide the axle out. Remove and replace

foot pedal. Re-assemble.

NOTE: Ensure that at re-assembly, the axle (0)

notch (40) is visible as shown.

86359530 VERSAMATIC 14 & 18

0

40

16

Maintenance

Troubleshooting

Technical Data VS 14 (VS 18)

PROBLEM CAUSE SOLUTION

Brush not turning

Hose nozzle not far enough into neck Reposition hose nozzle into neck

Brush jammed Turn off machine, clear brush and restart

Brush strip not fully inserted Push brush strip in all the way

Broken belt Replace belt

Red light stays on at

lowest brush setting

(#1)

Brush worn Replace brush strip

Full bag light on, or

poor suction

Full dust bag Replace bag

Hose clogged Remove and clean hose

Neck clogged Disconnect floor head from vac tank and

clean neck

Bag not properly installed Re-insert bag correctly

Exhaust or motor filter clogged Clean or replace filter

Back cover leaking air Re-Install dust bag, motor filter and back

cover to ensure tight fit all around

Full bag light off

when vacuum hose

is blocked or bag is

full

Sensor out of adjustment

Remove back door and use small screw-

driver to turn screw behind light, counter-

clockwise

Back door won’t

close

Bag not properly installed Re-insert bag correctly

Motor filter not in position Re-insert filter correctly

Machine won’t turn

on Faulty electrical circuit Have machine check by qualified service

person

ITEM DIMENSION/CAPACITY

Voltage 120V, 60 hz

Vacuum floor 8,6 amp

Air flow 117 cfm

Dust bag 1,3 gal, 3-layer

Brush motor 1,4 (1,8) amp

Brush width 12 3/4 (16/3/4) inches

Brush drive Non slip drive belt with electronic overload protection

Brush strip Replaceable

Height 48 inches

Width 14 (18) in

Weight 16 (18) lbs

86359530 VERSAMATIC 14 & 18

Lea las instrucciones antes de utilizar la máquina.

86359530-G

03/19/13

Instrucciones de funcionamiento

(ESP)

MODELOS: 1.012-050.0

VS14

1.012-051.0

VS18

120V

2

Modelo:

Fecha de la compra:

Número de serie:

Distribuidor:

Dirección:

Nº de teléfono:

Representante de ventas:

86359530 VERSAMATIC 14 & 18

Etiqueta de Datos de la Máquina

Registro de Garantía

Gracias por comprar un producto Windsor. El registro de la garantía es rápido y fácil.

Su registro nos permitirá brindarle un mejor servicio durante la vida útil del producto.

Para registrar el producto vaya a:

www.windsorind.com/WarrantyRegistration.aspx

Para el servicio de atención al cliente llame al:

1-800-444-7654

3

Índice

Etiqueta de Datos de la Máquina . . . . . . . . . . . . . 2

Índice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Cómo utilizar el manual. . . . . . . . . . . . . . . . . . . . . 4

Seguridad

INSTRUCCIONES DE SEGURIDAD

IMPORTANTES . . . . . . . . . . . . . . . . . . . . . . . . 5

INSTRUCCIONES PARA CONECTAR EL EQUIPO

A TIERRA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

IMPORTANTES PRECAUCIONES . . . . . . . . . . . 7

Operaciones

Componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Ensamblado de aspiradora . . . . . . . . . . . . . . . . . . 8

Conección de manguera de aspiración . . . . . . . . 8

Seguro del cuello giratorio . . . . . . . . . . . . . . . . . . 9

Cabezal de potencia encendido . . . . . . . . . . . . . . 9

Controlador de cepillo . . . . . . . . . . . . . . . . . . . . . . 9

Indicador del nivel del filtro . . . . . . . . . . . . . . . . . . 9

Mantenimiento

Cambio de la bolsa de papel . . . . . . . . . . . . . . . 10

Cambio de filtros . . . . . . . . . . . . . . . . . . . . . . . . . 10

Desbloqueos . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cambio de la banda de cepillo . . . . . . . . . . . . . . 11

Remoción de la cubierta del alojamiento del

interruptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Remoción del alojamiento de bolsa de polvo . . . 12

Reemplazo del motor de aspiración . . . . . . . . . . 13

Cambio del rodillo de cepillo . . . . . . . . . . . . . . . . 13

Remoción de la polea del rodillo

de cepillo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Remoción del cuello giratorio . . . . . . . . . . . . . . . 14

Remoción de la cubierta del

cuello giratorio. . . . . . . . . . . . . . . . . . . . . . . . . 14

Cambio del controlador electrónico . . . . . . . . . . 14

Reemplazo del pedal de pie . . . . . . . . . . . . . . . . 15

Resolución de problemas . . . . . . . . . . . . . . . . . . 16

Datos Técnicos VS 14 (VS 18) . . . . . . . . . . . . . . 16

Piezas

Tools, Bags & Filters. . . . . . . . . . . . . . . . . . . . . . 18

Upper Housing . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Power Head-VS 14 . . . . . . . . . . . . . . . . . . . . . . . 22

Power Head-VS 18 . . . . . . . . . . . . . . . . . . . . . . . 24

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 26

86359530 VERSAMATIC 14 & 18

4

Cómo utilizar el manual

El manual contiene las siguientes secciones:

• Cómo utilizar el manual

• Seguridad

• Operaciones

• Mantenimiento

• Lista de piezas

La sección CÓMO UTILIZAR EL MANUAL le indica

el modo de encontrar información importante para

pedir las piezas de recambio correctas.

Las piezas deben ser solicitadas a distribuidores

autorizados. Al realizar el pedido de piezas, es

importante saber el modelo y el número de serie

de la máquina. Consulte el cuadro DATOS DE LA

MÁQUINA que se completa durante la instalación

de la máquina. El cuadro DATOS DE LA MÁQUINA

está situado en la parte interior de la cubierta frontal

de este manual.

El modelo y número de serie de su máquina están

situados en el extremo inferior de la parte posterior

de la máquina.

La sección SEGURIDAD contiene información

importante acerca de los usos de la máquina

que pueden resultar peligrosos o poco seguros.

Se identifican niveles de riesgos que pueden

ocasionar lesiones personales o daños en el producto,

o lesiones graves que pueden provocar la muerte.

El objetivo de la sección FUNCIONAMIENTO

es familiarizar al operario con el manejo y el

funcionamiento de la máquina.

La sección MANTENIMIENTO incluye instrucciones

sobre mantenimiento preventivo para mantener la

máquina y sus componentes en buenas condiciones

de funcionamiento. Están clasificadas en el siguiente

orden general:

• Bolsa de polvo

• Filtros

• Bloqueo

• Bandas del cepillo

• Resolución de problemas

La sección LISTA DE PIEZAS contiene ilustraciones

de las piezas ensambladas y la correspondiente lista

de piezas. Incluye además varias columnas con

información:

•REF - la columna indica el número de

referencia en la ilustración de las piezas.

•PART NO. – la columna enumera

el número de pieza.

•PRV NO. - N.º de referencia

•DESCRIPTION - la columna es una breve

descripción de la pieza.

•NOTES- esta columna contiene la

información no incluida en las otras

columnas.

NOTA: Si en la máquina se incluye un juego de

servicio u opciones, asegúrese de conservar las

INSTRUCCIONES DEL JUEGO que acompañan

al mismo. Éste contiene los números de piezas de

recambio necesarias para solicitar piezas en el futuro.

NOTA: El número de pieza correspondiente

al manual está ubicado en la esquina inferior

izquierda de la tapa.

Modelo:

Fecha de la compra:

Número de serie:

Distribuidor:

Dirección:

Nº de teléfono:

Representante de ventas:

86359530 VERSAMATIC 14 & 18

La page charge ...

Versamatic 1.012-051.0 Operating Instructions Manual

Ce manuel convient également à

Versamatic 1.012-051.0 Operating Instructions Manual

dans d''autres langues

Autres documents