Pilaster Designs 678-60H Manuel utilisateur

678-60H
Marque
Pilaster Designs
Modèle
678-60H
Taper
Manuel utilisateur
Assembly Instructions for
QUEEN HEADBOARD/FOOTBOARD/SIDE RAILS
678-60H/60FB/60R
Caution : Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury,
therefore, for your protection, please remove any exposed staples used in packing.
1. We recommend that you assemble this product with the assistance of another person; this will make assembly easier, and
will help to eliminate damage to the product or injury to persons during assembly.
2. Please do not over tighten screws or bolts.
MADE IN MALAYSIA
DESCRIPTION QTYNO
PARTS LIST
SKETCH
1HEADBOARD 1 PC
3SIDE RAILS 2 PCS
4SLAT 5 PCS
SLAT LEG
5 5 PCS
SPRING WASHER - M8B
C
D
8 PCS
8 PCSFLAT WASHER - M8
E
F
CSK SCREW - M4 x 32 mm 10 PCS
ALLEN KEY - M5 1 PC
PAGE 1 OF 1
HARDWARE LIST
DESCRIPTION QTYNO SKETCH
JCBB BOLT - M8 x 25mm 8 PCSA
2FOOTBOARD 1 PC
SPRING WASHER - M6 5 PCS
JCBC BOLT - M6 x 30mm 5 PCS
ALLEN KEY - M5 1 PC
G
H
X10
X8
E
G
F
X5
C B A
D
H
Attach the Slat (4) to the
Side Rail (3) with a Screw
(H) using a Phillips
screwdriver (not provided).
STEP 2
Tighten the JCBC Bolt (E) and Washer (F) into
the Slat Support (5) using Allen Key (G).
Adjust the bottom leveler as needed.
STEP 3
STEP 1
Partially insert the JCBB Bolt (A) and
Washer (B), (C)into the Headboard (1). Affix
the Side Rail (3) to the Bolt (A) as shown and
fully tighten with the Allen Key (D).
Repeat with the Footboard (2).
DESCRIPTIONNO
11 PC
32 PCS
45 PCS
5 5 PCS
B
C
D
8 PCS
8 PCS
E
F
10 PCS
1 PC
PAGE 1 OF 1
DESCRIPTION
NO
8 PCSA
21 PC
5 PCS
5 PCS
1 PCG
H
X10
X8
E
G
F
X5
CBA
D
H
LISTE DES PIECES
LISTE DE QUINCAILLERIE


LATTES
SUPPORT POUR LATTES
PIED DE LIT





Idem pour le pied de lit (2).

Serrez le boulon JCBC (E) et la rondelle (F) dans



Fixez la latte (4) au longeron


cruciforme (non fourni).

VIS CSK - M4 x 32 mm
BOULON JCBB - M8 x 25mm
BOULON JCBC - M6 x 30mm
RONDELLE RESSORT - M8
 - M5
RONDELLE PLATE - M8
RONDELLE RESSORT - M6
 - M4



678-60H/60FB/60R







1. 
les blessures.
2. 
  • Page 1 1
  • Page 2 2

Pilaster Designs 678-60H Manuel utilisateur

678-60H
Marque
Pilaster Designs
Modèle
678-60H
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents