Unbranded Breeze 34GP Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

1
2800 Etienne Lenoir, Laval
Québec H7R 0A3 Canada
Purchase date: _________________________ Product Tracking Reference: ________________________
Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at
1-866-839-2888, 9 a.m. - 5 p.m., EST, Monday - Friday
BREEZE (B14)
An installation video guide can be found on our Youtube channel.
2017-01-13
2
CAUTION
Please carefully read the following important safety information before handling or installing this shower. There
is a risk of serious injury while handling this product. To minimize these risks, please note:
• Always wear safety glasses and gloves while handling.
• Always read and follow all the steps in the installation instructions.
• Inspect all contents and glass for damage before installation.
• Extreme caution should be taken while handling the glass during installation as the tempered glass may
shatter if in contact with a hard surface.
• Handle the tempered glass with caution! Improperly handling the glass can cause it to break suddenly in
small pieces (never in pointed fragments).
• Always take all precautions not to touch the tempered glass with any tools during the installation, or after
installed.
• Do not cut or modify the tempered glass as it will shatter if cut.
• Carefully remove product from packaging and keep packaging until installation is complete.
• Inspect all parts for damage; if there is damage to the unit prior to installation, please contact customer
service at the number provided in this guide.
• Installtheshoweronaoorthatislevelandabletoaccommodatetheweightoftheunitandanoccupant.
• Consult local building codes and compliance standards prior to installation and ensure conformity.
• Afterinstallation,andfromtimetotime,checktheglassfortandnishtoensurethatnothinghascome
loose since installation.
• Keep this installation manual for future reference.
NOTICE
• Anymodicationoralterationfromwhatisspeciedinthisinstructionmanualwillvoidanyandallwarranty
on this product.
• The distributor is not responsible for any damage to the unit or personal property caused by improper
installation. If you disregard instructional warnings, you will void your warranty and possibly deal with water
damage.
• Consult www.ovedecors.com for any additional information or question on this product’s installation.
PREPARATION
You will need at least two people to install this unit properly.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: Shower (60 min).
SAFETY INFORMATION
3
TABLE OF CONTENT
PACKAGE CONTENT..........................................................................................................................................4
HARDWARE CONTENT......................................................................................................................................6
TOOLS REQUIRED.............................................................................................................................................7
SHOWER REVERSIBILITY.................................................................................................................................. 8
BASE INSTALLATION........................................................................................................................................ 9
PREPARATION (OPTIONAL).............................................................................................................................10
WALL PREPARATION (OPTIONAL)..................................................................................................................10
FRAME ASSEMBLY...........................................................................................................................................14
FRAME POSITIONING...................................................................................................................................... 15
FRAME INSTALLATION.....................................................................................................................................18
DOOR INSTALLATION.......................................................................................................................................19
HANDLE INSTALLATION...................................................................................................................................20
CAULKING.........................................................................................................................................................21
LIMITED PRODUCT WARRANTY......................................................................................................................22
CARE AND MAINTENANCE..............................................................................................................................22
4
PACKAGE CONTENT
10
C
E
F
G
A
A
B
D
C
M
I
K
J
L
M
H
N
A
E
D
D
B
C
Dimensions variations
A
B
D E
C
BREEZE 31/34/36/38
32”
11
3
/
4
34” 36” 38”
A
B
C
D
E
±
1
/8 (3mm)
±
1
/4 (6mm)
815mm
865mm
915mm 965mm
835mm
890mm
1025mm 1130mm
130mm 130mm 130mm 130mm
200mm 175mm 315mm
300mm
918mm 996mm
1187mm
1318mm
35”
32
7
/
8
40
3
/
8
44
1
/
2
5
1
/
8
7
7
/
8
6
7
/
8
12
3
/
8
36
1
/
8
39
1
/
4
46
3
/
4
51
7
/
8
5
1
/
8
5
1
/
8
5
1
/
8
31
34 36
38
5
PACKAGE CONTENT
PART# DESCRIPTION QTY CODE
A Wall jamb 2
99STR1043-AC
B Fixed panel 1
99SG10018-AC
C Aluminum rail 2
99STR1033-AC (31)
99STR1034-AC (34)
99STR1035-AC (36)
99STR1036-AC (38)
D Short vertical water defector 1
99SRU0057-AC
N Long vertical water defector 1
99SRU0058-AC
E Door panel 1
99SG00021-AC
F Magnetic door gasket 1
99SRU0059-AC
G Door panel extrusion 1
99STR1037-AC
H Fixed panel moulding 2
99SRU0060-AC
I* Retaining clip 2
99SGC1030-AC
J* Door handle 1
99SHA1022-AC
K* Top door wheel 2
99SWE0010-AC
L* Bottom door wheel (with spring) 2
99SWE0011-AC
M Shower wall (Optional) 2
--
N Hardware content 1 99SHW0040-AC
O Hardware content (Shower wall) 1 99SHW0039-AC
6
HARDWARE CONTENT
CC
AA
BB
EE
FF
GG
HH
Screw
ST4×45
Qty.12+2
Wall plug
ø6×30
Qty.8
Screw
ST3.5×25
Qty.8+1
Screw
ST4×12
Qty.2+1
Screw
ST4×13
Qty.6+1
Door bumper
Qty.2
Screw cap
Qty.14
Washer
Qty.14
Qty.9 Qty.18
II JJ KK LL MM
Screw
M4×16
Qty.9
Screw
ST4×12
Qty.6
DD
Screw
ST4×14
Qty.2+1
7
TOOLS REQUIRED
Pencil
Silicone Measuring Tape
Rubber mallet Level Screwdriver
Allen key
Precision knife
1x3 BattensDrill
Trowel 3/16” Drill bit
8
• This instruction is drawn up for an opening from right to left (see illustration A).
• For an installation from left to right (see illustration B), use the same instructions, but switch around the
panels: mirror effect.
SHOWER REVERSIBILITY
A
B
9
PREPARATION
BASE INSTALLATION
!
Base installation
overview
Mortar
Base
Film
Under Base
1.1
Floor
Silicone
Drywall
Acrylic Wall
Studs
Batten
Silicone
Shower Base
Flange
Dry Wall
10
PREPARATION (OPTIONAL)
WALL PREPARATION (OPTIONAL)
View from the top
Remove the
layerlm
SILICONE
1"
1
"
3/16” DRILL BIT
View from the top
9X2.1
11
WALL PREPARATION (OPTIONAL)
LL
JJ
KK
9X
SILICONE
View from the top
Have the walls leveled with the
base in order to have a small and
constant gap between those two.
2.2
2.3
12
WALL PREPARATION (OPTIONAL)
fi
séhdA
evi
s
eh
d
A
OK
!
Construction adhesive
1x3 BATTEN
2.4
Breeze
D
31 4 5/16” - (109mm)
34 4 5/8” - (117mm)
36 3 13/16” - (97mm)
38 3 3/8” - (85mm)
D
13
WALL PREPARATION (OPTIONAL)
A
d
s
i
f
Ad h es
iv e
A
dhé
sif
A
d
hesive
MM
Optional step
NAIL
22X
ADHESIVE
6X
WARNING!
Make sure to apply pressure
on the shower walls surface
where glue has been applied.
2.5
2.6
2.7
Helpful Hint
Add silicone on
top of acrylic wall.
14
FRAME ASSEMBLY
FRAME ASSEMBLY (CONT.)
3.1
3.2
I
I
B G
C
C
DD
DD
BB
8X
H
H
15
FRAME ASSEMBLY (CONT.)
FRAME POSITIONING
2X
GG
EE
View from the top
Wall jamb positioning
Base
Wall
Center of the wall jamb
3.3
4.1
D
AA
16
FRAME POSITIONING (CONT.)
FRAME POSITIONING (CONT.)
4.2
4.3
4.4
17
FRAME POSITIONING (CONT.)
CC
8X
*Only for ceramic wall
4.5
4.6
18
FRAME POSITIONING (CONT.)
FRAME INSTALLATION
8X
HH AA II
6X
HH FF II
4.7
5.1
19
DOOR INSTALLATION
2X
N
2X
F
K
E
L
5.2
Note:
Assemble the door
wheel loosely
20
DOOR INSTALLATION (CONT.)
HANDLE INSTALLATION
1
K
2
K
4X
J
5.3
Note:
Strongly tighten
the door wheel
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Unbranded Breeze 34GP Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues