Wiremold V500-5 Guide d'installation

Taper
Guide d'installation
Wiremold Electrical Systems conform to and should be
properly grounded in compliance with requirements of the
current National Code or codes administered by local
authorities.
All electrical products may represent a possible shock or
fire hazard if improperly installed or used.Wiremold electri-
cal products are UL listed, made for interior use in dry loca-
tions only and should be installed in conformance with cur-
rent local and/or the National Electrical Code.
• Use No. 8 (5/16" [7.9mm] head size) flat head fastener or equivalent to mount base to surface.
• Utiliser une attache à tête plate de calibre 8 (tête de 7.9mm, 5/16" po.) ou une fixation équiva-
lente pour assujettir le tube guide-fils et les raccords à la surface de montage.
• Use un sujetador de cabeza plana No. 8 (tamaño de cabeza: 7.9mm, 5/16" de pulgada) o su
equivalente para unir la canalita y los accesorios a la superficide de montaje.
V5717A Internal Pull Elbow
V5700F/V200F Flexible Section
INSTALLATION INSTRUCTIONS
The Wiremold Company 60 Woodlawn Street • West Hartford, CT 06110 • Tel. 1-800-621-0049 Fax 860-232-2062
41577 398© 1998 The Wiremold Company
V5717A Internal Pull Elbow
500
700
V5700F/V200F Flexible Section
  • Page 1 1

Wiremold V500-5 Guide d'installation

Taper
Guide d'installation

dans d''autres langues