Dometic RH418NTE, RH418NTEG (R1234yf) Mode d'emploi

RH418NTE, RH418NTEG

Minibar

Installation and Operating Manual. . . . . . . 10

Minibar

Montage- und Bedienungsanleitung . . . . .24

Minibar

Instructions de montage et de service . . . .38

Minibar

Instrucciones de montaje y de uso . . . . . . .53

Minibar

Instruções de montagem e manual de

instruções . . . . . . . . . . . . . . . . . . . . . . . . . . .68

EN

DE

FR

ES

PT

REFRIGERATION

CLASSIC

protected by copyright and design law. The underlying technical design and the

products contained herein may be protected by design, patent or be patent

pending. The trademarks mentioned in this manual belong to Dometic Sweden AB.

All rights are reserved.

RH418NTE, RH418NTEG

3

4

3

2

1

2

3

4

2

RH418NTE, RH418NTEG

4

1.

2.

3.

3

1.

2.

5.

4. 3.

4

5.

4.

1.

2. 3.

5

6

3.

2.

1.

RH418NTE, RH418NTEG

5

1.

2.

3.

7

1. 3.

2.

4.

8

2. 1.

9

1.

3.

2.

0

RH418NTE, RH418NTEG

6

A

D

C

B

2

3

2

3

1

11

3

a

RH418NTE, RH418NTEG

7

b

40 mm

10 mm

3.

4.

1.

2.

c

6–8 mm

1–2 mm

d

RH418NTE, RH418NTEG

8

e

80 mm

90°

2.

1.

f

RH418NTE, RH418NTEG

9

g

h

SUPPLIER´S NAME MODEL IDENTIFIER

kWh/annumXYZ

XYZ LXYZ L

ABCD

XY dB

A

B

C

D

E

F

G

eprel.ec.europa.eu

EN

Explanation of symbols RH418NTE, RH418NTEG

10

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure

that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.

By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and

agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application

and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all appli-

cable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and

others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and

warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit

dometic.com.

Contents

1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

4 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

7 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

9 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

10 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1 Explanation of symbols

D

!

DANGER!

Safety instruction: Indicates a hazardous situation that, if not avoided,

will result in death or serious injury.

WARNING!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

CAUTION!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

EN

RH418NTE, RH418NTEG Safety instructions

11

A

I

2 Safety instructions

2.1 General safety

!WARNING! Failure to obey these warnings could result in death

or serious injury.

Electrocution hazard

• Ensure that the minibar has been installed by a qualified technician in

accordance with the Dometic installation manual.

• Do not operate the minibar if it is visibly damaged.

• If this minibars power cable is damaged, it must be replaced by the

manufacturer, service agent or a similarly qualified person in order to

prevent safety hazards.

• This minibar may only be repaired by qualified personnel. Inadequate

repairs may cause serious hazards.

• When positioning the minibar, ensure the supply cord is not trapped

or damaged.

• Do not locate multiple portable socket-outlets or portable power sup-

plies at the rear of the appliance.

• Plug the device to sockets that ensure proper connection especially

when the device needs to be earthed.

Fire hazard

• The refrigerant in the refrigerant circuit is highly flammable.

In the event of any damage to the refrigerant circuit:

– Switch off the minibar.

– Avoid naked flames and sparks.

– Air the room well.

• After installation, it must still be possible to disconnect the minibar

from the supply mains. This may be achieved by having the plug

accessible or by incorporating a switch in the fixed wiring according

to the wiring rules.

NOTICE!

Indicates a situation that, if not avoided, can result in property damage.

NOTE

Supplementary information for operating the product.

EN

Safety instructions RH418NTE, RH418NTEG

12

• Keep ventilation openings, in the minibar enclosure or in the built-in

structure, clear of obstruction.

• Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the

manufacturer.

• Do not open the refrigerant circuit under any circumstances.

• Do not use electrical devices inside the minibar unless they are

recommended by the manufacturer for that purpose.

• Do not use or store the minibar in confined spaces with none or mini-

mal air circulation.

Explosion hazard

• Do not store any explosive substances, such as spray cans with

propellants, in the minibar.

Health hazard

• This minibar can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or

instruction concerning use of the minibar in a safe way and understand

the hazards involved.

• Children shall not play with the minibar.

• Cleaning and user maintenance shall not be made by children without

supervision.

• Children aged from 3 to 8 years are allowed to load and unload the

minibar.

!CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Risk of crushing

• Do not put your fingers into the hinge.

Health hazard

• Foodstuff may only be stored in its original packaging or in suitable

containers.

ANOTICE! Damage hazard

• Check that the voltage specification on the type plate is the same as

that of the power supply.

• The minibar is not suitable for storing substances which are caustic or

contain solvents.

EN

RH418NTE, RH418NTEG Safety instructions

13

• The insulation of the cooling device contains flammable cyclopentane

and requires special disposal procedures. Deliver the cooling device

at the end of its life-cycle to an appropriate recycling center.

• Keep the drainage outlet clean at all times.

• Only carry the minibar upright.

2.2 Operating the minibar safely

DDANGER! Failure to obey these warnings will result in death or

serious injury.

Electrocution hazard

• Do not touch exposed cables with your bare hands.

!CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Electrocution hazard

• Before starting the minibar, ensure that the power supply line and the

plug are dry.

Health hazard

• Ensure that you only put items in the minibar which may be chilled at

the selected temperature.

• Food may only be stored in its original packaging or in suitable

containers.

• Opening the door for long periods can cause significant increase of

the temperature in the compartments of the minibar.

• Clean regularly surfaces that can come in contact with food and

accessible drainage systems.

• If the minibar is left empty for long periods:

– Switch off the minibar.

– Defrost the minibar.

– Clean and dry the minibar.

– Leave the door open to prevent mold developing within the

minibar.

ANOTICE!

Fire hazard

• Keep burning candles, lamps and other items with naked flames away

from the minibar so that they do not set the minibar on fire.

EN

Intended use RH418NTE, RH418NTEG

14

Damage hazard

• Do not place the minibar near naked flames or other heat sources

(heaters, direct sunlight, gas ovens etc.).

• Never immerse the minibar in water.

• Protect the minibar and the cable against heat and moisture.

• Ensure that foodstuffs do not touch the walls of the cooling area.

3 Intended use

The refrigeration appliance (also referred to as minibar) is intended for cooling and

storing beverages and food in closed containers.

The minibar is designed for operation on cruise liners or to be used in household and

similar applications such as:

• Staff kitchens in stores, offices and other working environments

•Farmhouses

• Hotels, motels and other residential type environments

• Bed and breakfast type environments

• Catering and similar non-retail applications

The minibar is not designed for installation in caravans or motor homes.

The minibar is suitable either as a built-in appliance or as a freestanding refrigeration

appliance. Refer to the installation instructions.

The minibar is not suitable for

• Storage of corrosive, caustic or solvent-containing substances

• Storage of fresh foods and medicine

• Deep-freezing of foodstuff

This product is only suitable for the intended purpose and application in accordance

with these instructions.

This manual provides information that is necessary for proper installation and/or

operation of the product. Poor installation and/or improper operating or mainte-

nance will result in unsatisfactory performance and a possible failure.

The manufacturer accepts no liability for any injury or damage to the product

resulting from:

• Incorrect assembly or connection, including excess voltage

EN

RH418NTE, RH418NTEG Technical description

15

• Incorrect maintenance or use of spare parts other than original spare parts

provided by the manufacturer

• Alterations to the product without express permission from the manufacturer

• Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product

specifications.

4 Technical description

The cooling device can cool products and keep them cool. A grid divider can be

used to separate foodstuffs, e.g. bottles and sweets. The cooling system is a thermo-

electric cooling with a Peltier element.

4.1 Control elements on the cooling device

4.2 Remote control

No. in

fig. 1, page 3 Description

1 Door opening sensor

2 Interior light

3 Automatic door control LED (optional)

4 Door lock

No. in

fig. 2, page 3 Description

1 Red button: Resets the door control monitor

2 Black button: Low inside temperature (two different levels possible)

3 Yellow button: High inside temperature

4 Blue button: Medium inside temperature

EN

Installation RH418NTE, RH418NTEG

16

5 Installation

!

The cooling device is designed for free-standing installation, but can be built-in if the

following conditions are complied with to ensure satisfactory operation and maxi-

mum cooling efficiency.

• The cooling device must be leveled carefully to ensure proper function.

• For the glass door version: When the ambient humidity is above 65 % at 25 °C

ambient temperature, moisture will condense on the door.

• The socket outlet for the mains connection must be freely accessible.

5.1 Changing the decorative plate

➤Change the decorative plate as shown (fig. 3, page 4 to fig. 6, page 4).

5.2 Reversing the door

➤Reverse the door as shown (fig. 7, page 5 to fig. 0, page 5).

I

For versions with automatic door control, proceed as follows:

1. Pull out the LED (fig. 13, page 3).

2. Lay the cable in the guide.

3. Insert the LED on the device‘s foot on the other side.

5.3 Fixing the cooling device

Ventilation (fig. a, page 6)

• Ventilation must be provided as shown in alternatives A, B, C or D.

• Ventilation grills (1), if used, must have openings of at least 200 cm² each.

CAUTION! Health hazard

To avoid a hazard due to instability of the device, it must be fixed in

accordance with the instructions.

NOTICE! Damage hazard

Do not use extension cords or ungrounded (two prong) adapters.

NOTE

The LED of the automatic door control (optional) must always be located

opposite the door hinge.

EN

RH418NTE, RH418NTEG Operation

17

• The minimum clearance between the cooling device‘s back and the surrounding

structure should be as follows:

• The ventilation duct must at least measure 105 mm x the width of the cooling

device.

• The entire cooling unit must project into the ventilation duct as shown.

• Air passing through the ventilation duct must not be preheated by any source of

heat.

• The ventilation duct must be kept free from any obstacles. Especially portable

multi socket outlets or portable power supplies, which can get warm, must not

be kept at the rear of the cooling device.

➤Fix the cooling device through its fixing feet as shown (fig. b, page 7).

5.4 Mounting the sliding hinge (optional)

You can mount a sliding hinge that allows the cooling device door to be opened at

the same time as the door of the built-in cabinet.

➤Mount the sliding hinge as shown (fig. c, page 7 to fig. f, page 8).

6Operation

6.1 Before first use

Before first use, clean the minibar inside and outside with a damp cloth for hygienic

reasons (see also chapter “Cleaning and maintenance” on page 20).

6.2 Saving energy

• Only open the minibar as often and for as long as necessary.

• Avoid unnecessarily low temperature settings.

• For optimal energy consumption, position the shelves and drawers according to

their position on delivery.

No. in

fig. a, page 6 Min. distance

220mm

3105mm

EN

Operation RH418NTE, RH418NTEG

18

• On a regularly basis, make sure the door seal still fits properly.

• Clean dust and dirt from the condenser at regular intervals.

6.3 Switching on

I

1. Place the cooling device on a firm base.

2. Connect the connection cable to the AC mains supply.

✔The cooling device starts cooling the interior.

6.4 Setting the temperature

To avoid food waste, note the following:

• Keep temperature fluctuation as low as possible. Only open the minibar as often

and for as long as necessary. Store the foodstuff in such a way that the air can still

circulate well.

• The minibar is equipped with an automatic temperature regulation function.

Select the average of the possible temperature values.

• Adjust the temperature to the quantity and type of the foodstuff.

Foodstuff can easily absorb or release odor or taste. Always store foodstuff covered

or in closed containers/bottles.

The cooling device is equipped with an automatic temperature regulation function.

With the optional remote control (fig. 2, page 3) you can adjust the temperature to

four different levels. Three buttons on the remote control the temperature settings.

•Black button (2): Low inside temperature (two different levels possible)

• Yellow button (3): High inside temperature

•Blue button (4): Medium inside temperature

With each press of the buttons on the remote control, the cooling temperature

switches between the possible values. By pressing a button, a red LED illuminates on

the remote control.

NOTE

A few water drops may form inside the cooling device if it has been cool-

ing for a lengthy period. This is normal because the moisture in the air

condenses to water when the temperature in the cooling device falls.

The cooling device is not defective. Wipe it out with a dry cloth if neces-

sary.

EN

RH418NTE, RH418NTEG Operation

19

I8

1. Remove the plastic insulation from the battery holder before initial use.

2. Align the upper side of the remote control to the LEDs of the interior light

(fig. 12, page 3). Maintain a distance of approx. 10 cm.

3. Press the desired button:

6.5 Using the minibar

A

6.6 Locking the door (optional)

➤Turn the key a quarter turn to the left to lock the cooling device (fig. g, page 9).

6.7 Switching off

1. If you wish to switch the cooling device off, pull out the connection cable.

2. Clean the interior to make sure it is dry enough.

NOTE

The red LED illuminates as soon as a signal has been sent out. Check the

batteries if the LED does not illuminate.

Button

(fig. 2page 3) Inside temperature LED signal

Black button (2)Press once: Low level The LEDs of the interior light

flash at high speed.

Press twice: Lowest level (maxi-

mum performance)

Yellow button (3)High level (minimum perfor-

mance)

The LEDs of the interior light

flash at low speed.

Blue button (4)Medium level The LEDs of the interior light

flash at medium speed.

NOTICE! Damage hazard

Only store heavy objects such as bottles or cans on the bottom of the

minibar.

EN

Cleaning and maintenance RH418NTE, RH418NTEG

20

6.8 Using the automatic door control (optional)

The automatic door control (optional) displays via an LED (fig. 13, page 3) that the

door has been opened.

If the door opening monitor LED is lit:

1. Open the cooling device.

2. If necessary, refill the cooling device.

3. Reset the door control monitor with the remote control (optional).

– Hold the remote control towards the door opening sensor (fig. 11,

page 3).

– Press the red button once (fig. 21, page 3).

4. Close the cooling device.

6.9 Defrosting the cooling device

The cooling device is equipped with an auto-defrost function.

7 Cleaning and maintenance

!

A

1. Use a soft cloth, lukewarm water and a mild detergent to clean the inside of the

cooling device.

2. Wash out the cooling device using clean water and dry thoroughly.

3. At annual intervals, remove dust from the cooling aggregate at the back of the

cooling device using a brush or a soft cloth.

WARNING! Electrocution hazard

Always disconnect the device from the power supply before you clean

and service it.

NOTICE! Damage hazard

• Never clean the cooling device under running water or in dish water.

• Do not use abrasive cleaning agents or hard objects during cleaning

as these can damage the cooling device.

La page est en cours de chargement...

Dometic RH418NTE, RH418NTEG (R1234yf) Mode d'emploi

Ce manuel convient également à

Dometic RH418NTE, RH418NTEG (R1234yf) Mode d'emploi

dans d''autres langues