VTech Telecommunications VM304 Manuel utilisateur

Marque: VTech Telecommunications

Modèle: VM304

Catégorie: Babyphones

Taper: Manuel utilisateur

Ce manuel convient également à

User’s manual

VM304

Accessory baby unit

for use with VTech model

VM341

Congratulations

on purchasing your new VTech product. Before

using this product, please read Important

safety instructions.

This manual has instructions on how to set

up and pair your new baby unit. For complete

instructions on using the baby unit, see the

user’s manual that comes with your video and

audio monitor.

For support, shopping, and everything new at

VTech, visit our website at

www.vtechphones.com.

3-month warranty!

Visit www.vtechphones.com.

Registration

enhanced warranty support.

Product news

Learn about the latest VTech

products.

NOTES

Use only the power adapter supplied with this

product.

Make sure the electrical outlet is not controlled by

wall switch.

The power adapter is intended to be correctly

oriented in a vertical or ﬂoor mount position. The

prongs are not designed to hold the plug in place if

they are plugged into a ceiling, under-the-table or

cabinet outlet.

Make sure the baby unit and the power adapter

cord are out of reach of children.

•

Light sensor

Camera

Infrared LEDs

Play/Stop

Press to play or stop lullaby on the

baby unit.

•

ON/OFF light

Microphone

Skip

Press to play the next lullaby.•

VOL+

Press to increase the speaker

volume.

•

VOL-

Press to decrease the speaker

volume.

•

ON/OFF switch

Slide to turn on or off the baby unit.•

Temperature sensor

Speaker

13 Threaded socket

For wall mount installation use.•

PAIR

Press and hold to pair to the parent

unit when a desired baby unit slot is

chosen at the parent unit.

•

Power jack

Pair extra new baby unit

Each newly purchased baby unit (VM304)

must be paired to your video and audio monitor

system (VM341).

NOTES

You can pair a maximum of four baby units to your

parent unit. Each new baby unit must be paired to

the parent unit before use.

Make sure you power on the parent unit before

pairing.

To pair a baby unit:

Press MENU when the parent unit is not in

use.

Press or to choose PAIR/UNPAIR

CAM, then press SELECT to select.

Press or to choose Pair CAM, then

press SELECT to select.

Press or to choose an empty baby unit

slot, then press SELECT. The parent unit

screen displays Press and hold the pair

button at the CAM for 5 seconds until the

power indicator flashes..

Immediately press and hold PAIR on the

bottom of the baby unit with a narrow

pointed object such as a pencil. The LED

light ﬂashes quickly.

When pairing is successful, the screen displays

the view of newly paired baby unit in

SINGLE-CAM mode. The LED light on the new

baby unit remains on.

NOTES

If pairing fails, the screen displays Pairing failed.

Try the pairing process again.

Only one baby unit can be paired at a time.

•

To unpair a baby unit:

NOTE

Make sure you power on the baby unit and the parent

unit before unpairing the baby unit.

On the idle parent unit, press MENU.

Press or to choose PAIR/UNPAIR

CAM, then press SELECT to select.

Press or to choose Unpair CAM, then

press SELECT to select.

Press or to choose a desired baby unit,

then press SELECT.

Press on the parent unit when the screen

displays To unpair CAM X, press the

[ZOOM] key at the Parent Unit..

Press SELECT when the screen displays

Then, press the [MENU/SELECT] key to

confirm..

When unpairing is successful, the screen

displays CAM X is unpaired and returns to

previous menu. If there is no paired baby

unit, the screen displays No CAM is paired..

The LED light on the selected baby unit

ﬂashes slowly.

Positioning the baby monitor

NOTE

This baby monitor is intended as an aid. It is not a

substitute for proper adult supervision, and should not

be used as such.

CAUTION

Keep the baby unit out of the reach of the baby. Never

place or mount the baby unit inside the baby’s crib or

playpen.

Place the baby unit at least 1 meter / 3 feet

away from your baby. Adjust the angle of the

camera to aim at your baby.

Place parent unit at least 1 meter / 3 feet

away from the baby unit.

NOTE

If you experience audio feedback on either the parent

unit or baby unit, move the parent unit further away

until there is no more audio feedback; or press -/VOL

on the parent unit to lower the audio feedback sound.

TIP

For desktop usage and/or wall mounting the baby

unit, you can refer to Quick Start Guide.

Operating range

The operating range of the baby monitor is up to

300 meters (1,000 feet) outdoors or 50 meters

(160 feet) indoors. The actual operating range

may vary depending on the environmental

conditions and other interferences such as

walls, doors and other obstructions.

To keep this product working well and looking good,

follow these guidelines:

Avoid putting it near heating appliances and devices

that generate electrical noise (for example, motors

or ﬂuorescent lamps).

DO NOT expose it to direct sunlight or moisture.

Avoid dropping the product or treating it roughly.

Clean with a soft cloth.

DO NOT immerse the baby unit in water and do not

clean them under the tap.

DO NOT use cleaning spray or liquid cleaners.

Make sure the baby unit is dry before you connect

them to the mains again.

When using your equipment, basic safety precautions

should always be followed to reduce the risk of ﬁre,

electric shock and injury, including the following:

Follow all warnings and instructions marked on

the product.

Adult setup is required.

This product is intended as an aid. It is not

a substitute for responsible and proper adult

supervision and should not be used as such.

This product is not intended for use as a medical

monitor.

Do not use this product near water. For example,

do not use it next to a bath tub, wash bowl,

kitchen sink, laundry tub or swimming pool, or in a

wet basement or shower.

Use only the adapters included with this product.

Incorrect adapter polarity or voltage can seriously

damage the product.

Baby unit power adapter:

Input 100-240V AC 50/60 Hz; output: 6V DC 1A

•

For pluggable equipment, the socket-outlet shall

be installed near the equipment and shall be

easily accessible.

The power adapters are intended to be correctly

oriented in a vertical or ﬂoor mount position. The

prongs are not designed to hold the plug in place

if it is plugged into a ceiling, under-the-table or

cabinet outlet.

Unplug this product from the wall outlet before

cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

Do not cut off the power adapters to replace them with

other plugs, as this causes a hazardous situation.

Do not allow anything to rest on the power cords.

Do not install this product where the cords may be

walked on or crimped.

This product should be operated only from the

type of power source indicated on the marking

label. If you are not sure of the type of power

supply in your home, consult your dealer or local

power company.

Do not overload wall outlets or use an extension

cord.

Do not place this product on an unstable table,

shelf, stand or other unstable surfaces.

This product should not be placed in any area

where proper ventilation is not provided. Slots and

openings in the back or bottom of this product

are provided for ventilation. To protect them from

overheating, these openings must not be blocked

by placing the product on a soft surface such as

a bed, sofa or rug. This product should never be

placed near or over a radiator or heat register.

Never push objects of any kind into this product

through the slots because they may touch

dangerous voltage points or create a short circuit.

Never spill liquid of any kind on the product.

To reduce the risk of electric shock, do not

disassemble this product, but take it to an

authorized service facility. Opening or removing

parts of the product other than speciﬁed access

doors may expose you to dangerous voltages or

other risks. Incorrect reassembling can cause electric

shock when the product is subsequently used.

You should test the sound reception every

time you turn on the units or move one of the

components.

Periodically examine all components for damage.

Be aware of possible loss of privacy while using

public airwaves. Conversations may be picked

up by other nursery monitors, cordless phones,

scanners, etc.

Children should be supervised to ensure that they

do not play with the product.

The product is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

Cautions

Use and store the product at a temperature

between 32

F and 104

Do not expose the product to extreme cold,

heat or direct sunlight. Do not put the product

close to a heating source.

Make sure the baby unit(s) and the adapter

cord(s) are always out of reach of the baby,

at least 3 feet away from the baby or crib, to

avoid a possible strangulation hazard.

Never place the baby unit(s) inside the baby’s

crib or playpen. Never cover the baby unit(s)

with anything such as a towel or a blanket.

Other electronic products may cause

interference with your baby monitor. Try

installing your baby monitor as far away from

these electronic devices as possible: wireless

routers, radios, cellular telephones, intercoms,

room monitors, televisions, personal

computers, kitchen appliances and cordless

telephones.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital cordless

devices):

Wireless Technology Research, LLC (WTR), an

independent research entity, led a multidisciplinary

evaluation of the interference between portable

wireless devices and implanted cardiac pacemakers.

Supported by the U.S. Food and Drug Administration,

WTR recommends to physicians that:

Pacemaker patients

Should keep wireless devices at least six inches

from the pacemaker.

Should NOT place wireless devices directly over

the pacemaker, such as in a breast pocket, when it

is turned ON.

WTR’s evaluation did not identify any risk to

bystanders with pacemakers from other persons

using wireless devices.

Electromagnetic fields (EMF)

This VTech product complies with all standards

regarding electromagnetic ﬁelds (EMF). If handled

properly and according to the instructions in this

user’s manual, the product is safe to be used based

on scientiﬁc evidence available today.

•

What’s in the box

Before use

Connect the baby unit

Overview

General product care

Important safety instructions

At least 1 meter

(3 feet)

At least 1 meter

(3 feet)

The RBRC

seal on the lithium-ion battery indicates

that VTech Communications, Inc. is voluntarily

participating in an industry program to collect and

recycle these batteries at the end of their useful lives,

when taken out of service within the United States

and Canada.

The RBRC

program provides a convenient

alternative to placing used lithium-ion batteries into

the trash or municipal waste, which may be illegal in

your area.

VTech’s participation in RBRC

makes it easy for

you to drop off the spent battery at local retailers

participating in the RBRC

program or at authorized

VTech product service centers. Please call

1 (800) 8 BATTERY

for information on Li-ion battery

recycling and disposal bans/restrictions in your

area. VTech’s involvement in this program is part of

its commitment to protecting our environment and

conserving natural resources.

RBRC

and 1 (800) 8 BATTERY

are registered

trademarks of the Rechargeable Battery Recycling

Corporation.

FCC Part 15

This equipment has been tested and found to comply

with the requirements for a Class B digital device

under Part 15 of the Federal Communications

Commission (FCC) rules. These requirements are

intended to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV

technician for help.

Changes or modiﬁcations to this equipment not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

To ensure safety of users, the FCC has established

criteria for the amount of radio frequency energy

that can be safely absorbed by a user or bystander

according to the intended usage of the product. This

product has been tested and found to comply with the

FCC criteria. The baby unit shall be installed and used

such that parts of all persons’ body are maintained at

a distance of approximately 8 in (20 cm) or more.

This Class B digital apparatus complies with Canadian

requirement:

CAN ICES-3 (B)/NMB-3(B)

Industry Canada

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation.

Privacy of communications may not be ensured when

using this product.

The term ‘’IC:‘’ before the certiﬁcation/registration

number only signiﬁes that the Industry Canada

technical speciﬁcations were met.

This product meets the applicable Industry Canada

technical speciﬁcations.

RF radiation exposure statement

The baby unit complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment. The baby unit should be installed and

operated with a minimum distance of 8 in (20 cm)

between the baby unit and all persons’ body. Use of

other accessories may not ensure compliance with

FCC RF exposure guidelines. This transmitter must

not be co-located or operating in conjunction with any

other antenna or transmitter. This equipment complies

also with Industry Canada RSS-102 with respect to

Canada’s Health Code 6 for Exposure of Humans to

RF Fields.

•

Mesures de sécurité importantes

Lorsque vous utilisez votre appareil, vous devriez

toujours suivre certaines mesures de précaution

de base aﬁn de réduire les risques d’incendie,

d’électrocution et de blessures corporelles, dont

ceux qui suivent :

Observez toutes les instructions et mises en garde

inscrites sur l’appareil.

L’installation par un adulte est requise.

Ce produit a été conçu pour être un dispositif

d’appoint seulement. Il n’est pas le remplacement

d’une supervision responsable et adéquate par un

adulte et ne devrait pas être utilisé comme telle.

Ce produit n’est pas conçu pour être utilisé en tant

que moniteur médical.

N’utilisez pas cet appareil près de l’eau ni de toute

autre source d’humidité, par exemple, près d’une

baignoire, cuve à lessive, évier de cuisine, dans

un sous-sol humide ni près d’une piscine, dans un

soussol humide ou une douche.

N’utilisez que les adaptateurs inclus avec ce

produit. L’utilisation d’un adaptateur dont la

polarité ou la tension serait inadéquate risque

d’endommager sérieusement le produit et mettre

votre sécurité en péril.

Adaptateur de l’unité du bébé :

Entrée 100-240V CA 50/60 Hz; Sortie : 6 V CC 1A

Pour les PRODUITS À BRANCHER À UNE

PRISE DE COURANT, la prise de courant doit

être installée près du produit, aﬁn d’assurer une

accessibilité sécuritaire à la prise de courant.

Lorsqu’ils sont branchés dans une prise de

courant, les adaptateurs secteur ont été conçus

pour être orientés correctement, soit à la verticale

ou au plancher. Les broches n’ont pas été conçues

pour supporter le poids du bloc d’alimentation et

le maintenir en place si celuici est branché dans

une prise au plafond, sous une table ou dans un

meuble.

Débranchez ce produit de la prise de courant

avant de procéder au nettoyage. N’utilisez pas de

nettoyants en aérosols. Utilisez un chiffon humide

pour le nettoyer.

Ne coupez pas les cordons d’alimentation pour

remplacer les ﬁches, car ceci peut présenter un

danger potentiel.

Ne laissez aucun objet reposer ni appuyer sur le

cordon d’alimentation. N’installez pas cet appareil

dans un endroit où l’on risque d’écraser le cordon

d’alimentation ou de le piétiner.

Ne faites fonctionner cet appareil qu’avec le type

d’alimentation indiqué sur l’étiquette. Si vous

ne connaissez pas le type d’alimentation que

vous possédez à votre domicile, consultez votre

marchand ou votre compagnie locale d’électricité.

10.

11.

Ne surchargez pas les prises de courant murales

ni les rallonges électriques.

Ne placez pas cet appareil sur un chariot,

meuble, trépied, support de montage ni table

chancelants.

Les trous et ouvertures du boîtier, situés à

l’arrière de l’appareil ou sous celui-ci, servent à

aérer l’appareil. Pour l’empêcher de surchauffer,

ne bloquez sous aucun prétexte ces ouvertures et

n’empêchez pas l’aération adéquate de l’appareil

en le plaçant sur un lit, divan, tapis ou toute autre

surface similaire. De même, ne le positionnez

pas à proximité ni au-dessus d’une source de

chaleur ou d’un calorifère. De plus, ne placez pas

l’appareil dans un endroit avant de vous assurer

qu’il y ait une bonne circulation d’air.

N’enfoncez jamais d’objets à travers les

ouvertures de cet appareil, car ils pourraient

entrer en contact avec des points de tension

dangereux ou causer des courts-circuits qui

peuvent dégénérer en incendies ou en risques

d’électrocution. Ne renversez jamais de liquide

dans ce produit.

Aﬁn de réduire les risques d’électrocution, ne

démontez pas cet appareil, mais apportez-le dans

un centre de service autorisé. L’ouverture du

boîtier ou le retrait de toutes pièces que contient

cet appareil, à l’exception de l’accès autorisé à

certaines portes ou ouvertures, risque de vous

exposer à des points de tension dangereux ou

d’autres dangers. Un remontage incorrect peut

par la suite présenter des risques d’électrocution.

Vous devriez tester la réception chaque fois que

vous mettez l’appareil en fonction.

Examinez les composantes aﬁn de vériﬁer si

celles-ci ne sont pas endommagées.

Soyez avisé de la perte de la conﬁdentialité

lorsque vous utilisez les ondes publiques. Les

conversations peuvent être entendues par

d’autres moniteurs de bébé, des téléphones sans

ﬁl, des scanneurs, etc.

Les enfants devraient être supervisés aﬁn de

vous assurer qu’ils ne jouent pas avec l’appareil.

Le produit n’est pas conçu pour être utilisé

par des personnes (incluant des enfants) aux

capacités physiques, sensorielles ou mentales

réduites ou qui manquent d’expérience et de

connaissances, à moins qu’on leur ait donné

sufﬁsamment de supervision ou d’instructions

relativement à l’utilisation de l’appareil par une

personne responsable de leur sécurité.

CONSERVEZ CES INSTRUCTIONS

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

Mises en garde

Utilisez et entreposez le produit à une

température entre 0˚ C (32˚F) et 40˚C (104˚ F).

N’exposez pas cet appareil à des froids ou des

chaleurs extrêmes, ainsi qu’à la lumière directe

du soleil. Ne l’installez pas près d’une source de

chauffage.

Assurez-vous que le moniteur et le cordon

de l’adaptateur sont toujours hors de portée

des enfants, à au moins 1 mètre (3 pieds) de

l’enfant ou du berceau, pour éviter tout risque de

strangulation.

Ne jamais placer le moniteur à l’intérieur du

berceau ou du parc de bébé. Ne jamais couvrir le

moniteur ou l’unité (s) portative avec un article tel

une serviette ou une couverture.

D’autres équipements électroniques peuvent

produire des interférences sur votre moniteur

vidéo et audio. Tentez d’installer votre moniteur

vidéo ou audio à l’écart des appareils

électroniques tels que des routeurs sans fil,

radios, téléphones cellulaires, interphones,

moniteurs, téléphones, ordinateurs personnels,

électroménagers et téléphones sans fil.

Stimulateurs cardiaques implantés dans

l’organisme

Les simulateurs cardiaques (ne s’applique qu’aux

dispositifs numériques sans fil) :

L’organisme ‘Wireless Technology Research, LLC

(WTR)’, une firme de recherche indépendante,

a mené une évaluation pluridisciplinaire des

interférences entre les téléphones sans fil portatifs

et les stimulateurs cardiaques implantés dans

l’organisme. Appuyée par l’Administration des

aliments et drogues (FDA) des États-Unis, la firme

WTR recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

Vous devriez maintenir les dispositifs sans fil à au

moins six pouces du simulateur cardiaque.

Ils ne doivent PAS placer le téléphone sans fil

directement sur le stimulateur cardiaque, tel que

dans une poche de chemise, lorsque celui-ci est

en marche.

L’étude effectuée par l’organisme WRS n’a pas

identifié de risque pour les détenteurs de simulateurs

cardiaques causés par les gens qui utilisent dispositifs

sans fil à proximité de ceux-ci.

Champs électromagnétiques (EMF)

Ce produit de VTech est conforme à toutes les normes

se rapportant aux champs électromagnétiques (EMF)

standard. Si vous le manipulez correctement en

suivant les instructions de ce guide, son utilisation

sera sécuritaire pendant de nombreuses années,

selon les meilleures évidences scientifiques dont nous

disposons aujourd’hui.

•

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to

the holder of a valid proof of purchase (“Consumer”

or “you”) that the Product and all accessories

provided in the sales package (“Product”) are

free from defects in material and workmanship,

pursuant to the following terms and conditions,

when installed and used normally and in accordance

with the Product operating instructions. This limited

warranty extends only to the Consumer for Products

purchased and used in the United States of America

and Canada.

What will VTech do if the Product is not free from

defects in materials and workmanship during

the limited warranty period (“Materially Defective

Product”)?

During the limited warranty period, VTech’s

authorized service representative will repair or replace

at VTech’s option, without charge, a Materially

Defective Product. If we repair the Product, we may

use new or refurbished replacement parts. If we

choose to replace the Product, we may replace it with

a new or refurbished Product of the same or similar

design. We will retain defective parts, modules, or

equipment. Repair or replacement of the Product, at

VTech’s option, is your exclusive remedy. VTech will

return the repaired or replacement Products to you

in working condition. You should expect the repair or

replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends

for ONE (1) YEAR from the date of purchase. If VTech

repairs or replaces a Materially Defective Product

under the terms of this limited warranty, this limited

warranty also applies to the repaired or replacement

Product for a period of either (a) 90 days from the

date the repaired or replacement Product is shipped

to you or (b) the time remaining on the original one-

year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, ﬁre, water or other

liquid intrusion; or

2. Product that has been damaged due to repair,

alteration or modiﬁcation by anyone other than an

authorized service representative of VTech; or

3. Product to the extent that the problem experienced

is caused by signal conditions, network reliability, or

cable or antenna systems; or

4. Product to the extent that the problem is caused by

use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product

serial number plates or electronic serial numbers

have been removed, altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for

repair from outside the United States of America

or Canada, or used for commercial or institutional

purposes (including but not limited to Products used

for rental purposes); or

7. Product returned without a valid proof of purchase

(see item 2 on the next page); or

8. Charges for installation or set up, adjustment of

customer controls, and installation or repair of

systems outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit

our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls and

features may save you a service call.

Except as provided by applicable law, you assume

the risk of loss or damage during transit and

transportation and are responsible for delivery or

handling charges incurred in the transport of the

Product(s) to the service location. VTech will return

repaired or replaced Product under this limited

warranty. Transportation, delivery or handling charges

are prepaid. VTech assumes no risk for damage or

loss of the Product in transit. If the Product failure

is not covered by this limited warranty, or proof of

purchase does not meet the terms of this limited

warranty, VTech will notify you and will request that

you authorize the cost of repair prior to any further

repair activity. You must pay for the cost of repair and

return shipping costs for the repair of Products that

are not covered by this limited warranty.

What must you return with the Product to get

warranty service?

Return the entire original package and contents

including the Product to the VTech service location

along with a description of the malfunction or

difﬁculty; and

Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product model)

and the date of purchase or receipt; and

Provide your name, complete and correct mailing

address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement

between you and VTech. It supersedes all other

written or oral communications related to this Product.

VTech provides no other warranties for this Product.

The warranty exclusively describes all of VTech’s

responsibilities regarding the Product. There are no

other express warranties. No one is authorized to make

modiﬁcations to this limited warranty and you should not

rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives you

speciﬁc legal rights, and you may also have other

rights, which vary from state to state or province to

province.

Limitations: Implied warranties, including those of

ﬁtness for a particular purpose and merchantability (an

unwritten warranty that the Product is ﬁt for ordinary

use) are limited to one year from the date of purchase.

Some states/provinces do not allow limitations on how

long an implied warranty lasts, so the above limitation

may not apply to you. In no event shall VTech be liable

for any indirect, special, incidental, consequential,

or similar damages (including, but not limited to lost

proﬁts or revenue, inability to use the Product or other

associated equipment, the cost of substitute equipment,

and claims by third parties) resulting from the use of

this Product. Some states/provinces do not allow the

exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not

apply to you.

Please retain your original sales receipt as proof of

purchase.

Frequency

control

Crystal controlled PLL synthesizer

Transmit

frequency

2406 - 2475 MHz

Channels 24

Nominal

effective range

Maximum power allowed by FCC

and IC. Actual operating range may

vary according to environmental

conditions at the time of use.

Power

requirements

Input: 100-240V AC 50/60Hz

Output: 6V DC @ 1A

Credits:

The Background Noise sound ﬁle was created by Caroline

Ford, and is used under the Creative Commons license.

The Stream Noise sound ﬁle was created by Caroline Ford,

and is used under the Creative Commons license.

The Crickets At Night sound ﬁle was created by Mike Koenig,

and is used under the Creative Commons license.

The Heart Beat sound ﬁle was created by Zarabadeu, and is

used under the Creative Commons license.

FCC and IC regulations

Limited warranty

Speciﬁcations are subject to change without notice.

Document order number: 91-008405-010-100

Technical specifications

For cETL compliance onlyThe RBRC

seal

VTech Telecommunications VM304 Manuel utilisateur

Marque: VTech Telecommunications

Modèle: VM304

Catégorie: Babyphones

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: VTech Telecommunications VM304 User manual

Documents connexes

VTech EW780-8180-00 Manuel utilisateur

VTech Telecommunications VM304 Manuel utilisateur

Ce manuel convient également à

VTech Telecommunications VM304 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents