Samsung HW-J6001R Guide de démarrage rapide

Marque: Samsung

Modèle: HW-J6001R

Catégorie: Cheminées

Taper: Guide de démarrage rapide

HW-J6000R

HW-J6001R

For further information, refer to the Web Manual.

Web manual : www.Samsung.com

Support

Product name search HW-J6000R or HW-J6001R

User Manual

· 2 · English

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

Class II product : This symbol indicates that it does not require a safety connection to electrical

earth (ground).

AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC

voltage.

DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC

voltage.

Caution, Consult instructions for use : This symbol instructs the user to consult the user

manual for further safety related information.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the

mains plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on

the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all times.

· 3 · English

PRECAUTIONS

1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification

sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with

enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the

unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn

off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long

period of time.

2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage

the unit.

3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit

to malfunction.

4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong

magnetic or electric fields. Disconnect the power cable from the AC supply if the unit malfunctions. Your product is

not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored

in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached

room temperature before using.

5. The batteries used with this product contain chemicals that are harmful to the environment.

Do not dispose of batteries in the general household trash. Do not dispose of batteries in a fire. Do not short circuit,

disassemble, or overheat the batteries. There is a danger of explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type.

WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD,

The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries

away from children. If the battery compartment does not close securely, stop using the product and keep it away from

children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

· 4 · English

CHECKING THE COMPONENTS

Subwoofer

1 Power Cord

Soundbar Main Unit

2 AC/DC Adapter 3 Power Cord

Remote Control /

Battery

HDMI Cable

CONNECTING ELECTRICAL POWER

Use the power components (1, 2, 3) to connect the power supplies in the following order:

Subwoofer  Soundbar Main Unit

c For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of Soundbar main unit)

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

DC 14V

POWER

DC 14V

(Power Jack)

Connecting electrical power

1 Power Cord

2 AC/DC Adapter

3 Power Cord

Rear of Subwoofer

Rear of the Soundbar Main Unit

c Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is

hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter

and cause the Adapter to malfunction.

· 5 · English

CONNECTING THE SUBWOOFER TO THE SOUNDBAR

MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.

Subwoofer

Soundbar Main Unit

Sou

Unit

The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main

unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the front of the

subwoofer stops blinking and glows blue continuously.

c If the indicator on the front of the subwoofer displays in red or flashes in blue, the subwoofer has not

automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.

c Important: Before you begin, put the battery into the remote. See page 12 for instructions.

POWER

1. Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.

2. Press the ID SET button on the rear of the subwoofer for 5 seconds. The red indicator on the front of the

subwoofer turns off and the blue indicator flashes rapidly.

3. Press the

button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.

4. The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then

disappears.

ID SET

· 6 · English

5. While the subwoofer's indicator is flashing blue, press the button on your remote control or on the top of

the Soundbar main unit to turn on the Soundbar main unit.

6. The connection is complete if the indicator on the front of the subwoofer stops flashing and glows

continuously.

c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.

Expand to true wireless surround sound by connecting the Samsung Wireless Rear

Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)

c For further information, refer to the Web Manual.

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

c Important: Before you begin, put the battery into the remote. See page 12 for instructions.

Method 1. Connecting with a Cable

HDMI OUT

(TV-ARC)

Bottom of Soundbar

HDMI IN

(TV-ARC)

Soundbar

HDMI Cable

Check the HDMI OUT (TV-ARC)

port of the Soundbar main unit.

Check the (TV-ARC) at

HDMI IN port of your TV.

1. Connect the HDMI cable as in the picture above.

2. TV ARC appears on display of the product and TV sound is output.

TV ARC

c If TV sound is not output, press the button on the top of your Soundbar or the SOURCE button on the

remote control to select the D.IN mode on Soundbar main unit display. Then, the D.IN mode is changed to

TV ARC and TV sound is output.

c If the Soundbar main unit display does not change to TV ARC, check the cable connections.

c You can conveniently control the volume of the Soundbar and interlock power supply.

· 7 · English

Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)

1. Turn on your Samsung TV and the Soundbar.

2. Select TV mode in your Soundbar display by pressing the

button on the top of the Soundbar or the

SOURCE button on your remote control. (Modes are displayed in the following order: D.IN → AUX → HDMI

→ BT → TV → USB.)

3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote

control.

Samsung Audio Device detected.

Do you want to hear TV sound

through this device?

Yes No

Select <Yes> with your TV remote control.

4. The Soundbar outputs TV sound.

c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select

Add New Device, and set Add New Device to ON. Then, try again.

c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the

volume with the Soundbar's remote or the TV's remote. You can also have the Soundbar turn on and off

automatically when you turn the TV on or off by setting the Bluetooth POWER On function to On.

See page 13.

c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since

2012.

c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,

press the & button on your remote control for more than 5 seconds.

c In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.

c Do not place electronic devices or metallic objects on top of the product.

e.g., Wired/wireless router, set-top box, or modem.

c Placing the product on the floor may degrade wireless network performance, depending on the floor material.

· 8 · English

CONNECTION VIA BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!

c It is not possible to connect multiple Bluetooth devices at the same time.

Connect

Bluetooth device

1. Press the

button on the top of the Soundbar or the SOURCE button on the remote control to select BT.

2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's

user manual.)

3. Select "[Samsung] HW-Jxxxx J-Series" from the list.

• When the connection is established between the Soundbar and Bluetooth device, the front display

window of the Soundbar displays [Bluetooth device name] → BT.

4. Play music on the connected device.

[If failed to connect to the Bluetooth device / If device searching is needed again]

• Delete the previous "[Samsung] HW-Jxxxx J-Series" found by the Bluetooth device and have it search for

the Soundbar again.

c If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

c In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar

and the Bluetooth device exceeds 10 meters.

c The Soundbar automatically turns off after 5 minutes in the Ready state.

c The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

If there is a strong electrical field around the Soundbar.

If several Bluetooth devices are simultaneously paired with the Soundbar.

If the Bluetooth device is turned off, not in place, or malfunctions.

c Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be

kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

Disconnecting the Soundbar from the Bluetooth device

Press the SOURCE button on the remote control or the button on the product's

top

to switch from BT to

another mode or turn off the Soundbar.

• The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before

terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

· 9 · English

CONNECTING TO AN EXTERNAL DEVICE

HDMI Cable

You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by

connecting them to your Soundbar.

HDMI IN

HDMI OUT

(TV-ARC)

HDMI Cable

External

Device

Soundbar

HDMI OUT

HDMI IN

Bottom of Soundbar

1. Connect the HDMI cable as in the picture above.

2. Press the

button on top of your Soundbar or the SOURCE button on your remote control to select

HDMI mode.

3. The Soundbar shows HDMI on its display and output sound.

USB

You can play music files located on USB storage devices through the Soundbar.

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

USB port Display

1. Connect the USB device to the USB port on the back of the product.

2. Press the

button on the Soundbar main unit’s top panel or the SOURCE button on the remote control to

select the USB mode.

3. USB appears on the display screen.

●

The Soundbar connection to the USB device is complete.

●

The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more

than 5 minutes.

· 10 · English

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar's system firmware in the future.

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

If an update is offered, you can update the firmware by connecting a USB device with the firmware update

stored on it to the USB port on your Soundbar.

For more information about how to download update files, go to the Samsung Electronics website at

(samsung.com/sec)  search for the model name  download the firmware from the customer support menu

option. The option name can vary.

INSTALLING THE WALL MOUNT

I nstallation Precautions

• Install on a vertical wall only.

• Do not install the Soundbar system in a location with high temperature and/or humidity. Install the system on a

stable wall that can bear the weight of the Soundbar main unit.

• Check the strength of the wall. To install the Soundbar system on a wall that may not bear the Soundbar main

unit weight, reinforce the wall before installation. If this is not possible, install the system on another wall, one

stable enough to bear the weight of the Soundbar main unit.

• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board,

iron board, wood, etc.). If possible, fix the support screws into wall studs.

• Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar

on.

Diameter : M5

Length: 35 mm or longer recommended.

• Connect cables from the unit to external devices before you install it on the wall.

• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.

· 11 · English

1. Place the installation guide against the wall

surface.

●

The installation guide must be level.

●

If the TV is mounted on the wall, install the

Soundbar at least 5 cm below the TV.

5 cm or

2. Mark the location where the screws will go

through on the wall, and then remove the

installation guide. Next, drill holes for the screws

using an appropriately sized drill bit.

Center Line

3. Fasten the 2 Bracket-Wall pieces firmly to the

wall at the marked locations using the appropriate

screws.

4. Attach the Soundbar to the 2 Bracket-Wall

pieces as shown in the illustration.

5. Insert a Holder-Fix Mount into each hole on the

product’s bottom side. Tighten each Holder-Fix

Mount to fix the Soundbar to the 2 Bracket-Wall

pieces.

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

c Do not hang onto the installed unit and avoid

striking or dropping the unit.

c Secure the unit firmly to the wall so that it does

not fall off. If the unit falls off, it may cause an

injury or damage the product.

c When the unit is installed on a wall, please make

sure that children do not pull any of the

connecting cables, as this may cause it to fall.

c For the optimal performance of a wall mount

installation, install the speaker system at least

5 cm below the TV, if the TV is mounted on the

wall.

c For your safety, if you do not mount the unit on

the wall, install it on a secure, flat surface where it

is unlikely to fall.

· 12 · English

REMOTE CONTROL BUTTONS & FEATURES

Inserting Battery before using the Remote Control

1. Use a suitable coin to turn the remote control's battery cover

counterclockwise to remove it as shown in the figure below.

2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when

inserting the battery. Put the battery cover on, and then align the '●'

marks side by side as shown in the figure below.

3. Use a suitable coin to turn the remote control battery cover clockwise

as far as it will go to fix it in place.

 

Controlling the Soundbar using Your TV Remote

Control

1. Press and hold the SOUND button for more than 5 seconds while

the Soundbar is turned on.

2. "ON - TV REMOTE" appears on the Soundbar's display.

3. In the TV's menu, set the TV speaker to external speaker.

c Not available if the TV ARC function or HDMI mode is in use.

c All buttons are not available except the VOL +/- and the

buttons in

this function.

c TV menus differ by manufacturer and model. Refer to the TV's user

manual for further information.

c Manufacturers supporting this function:

●

VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,

GRUNDIG, Hisense, RCA

●

This function may not be compatible with your TV's remote

depending on the remote control's manufacturer.

c To turn off this function, press the

SOUND button for 5 seconds.

"OFF - TV REMOTE" appears on the Soundbar's display.

󰟳

Power

Turns the Soundbar on and off.

󰟴

SOURCE

Press to select a source connected to the Soundbar.

󰟵

󰟴

󰟳

󰟹

󰟺

󰟷

󰟶

󰟸

󰟻

· 13 · English

󰟵

Mute

Sets the volume temporarily to 0.

Press again to cancel.

󰟶

Volume

Adjusts the volume level of the unit.

󰟷

Play / Pause

Press the

button to pause a music temporarily.

Press the

button again to play the selected music.

Skip Forward

Selects the next file.

Skip Back

Selects the previous file.

Repeat

Press to set the Repeat function during music playback from a USB device.

• OFF-REPEAT : Cancels Repeat Playback.

• TRACK-REPEAT : Plays a track repeatedly.

• ALL-REPEAT : Plays all tracks repeatedly.

• RANDOM-REPEAT : Plays tracks in random order.

󰟸

Surround Sound

The Surround Sound function adds depth and a sense of space to sound.

When this button is pressed, ON or OFF is repeatedly alternated.

󰟹

Bluetooth POWER

Press to turn the Bluetooth POWER On function on and off. When the Bluetooth

POWER On function is on, ON - BLUETOOTH POWER appears in the Soundbar’s

display.

󰟺

SOUND EFFECT

You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE,

SPORTS, MOVIE, and NIGHT.

c NIGHT Mode

When changing a channel or music source, the volume difference between

different music input sources is automatically adjusted to be suitable for

listening.

󰟻

SOUND CONTROL

You can select from TREBLE, BASS, SUBWOOFER LEVEL

AUDIO SYNC.

• Press to select TREBLE, BASS,

SUBWOOFER LEVEL or AUDIO SYNC.

Then, use the ,  buttons to adjust the

TREBLE

BASS

volume from -6 ~ +6,

SUBWOOFER LEVEL volume from -12, -6 ~ +6.

• If the video and audio between the TV and your Soundbar are not

synchronized, select AUDIO SYNC in Sound Settings, and then set audio delay

between 0~300 milliseconds by using the ,  buttons.

· 14 · English

TROUBLESHOOTING

Before seeking assistance, check the following.

The unit will not turn on.

Is the power cord plugged into the outlet?

 Connect the power plug to the outlet.

A function does not work when the button is

essed.

Is there static electricity in the air?

 Disconnect the power plug and connect it again.

Sound is not produced.

Is the Mute function on?



Press the (Mute) button to cancel the function.

Is the volume set to minimum?

 Adjust the V

olume.

The remote control does not work.

Is the battery drained?

 Replace with new battery

Is the distance between the remote control and

Soundbar main unit too far?

 Move the remote control closer to the Soundbar

main unit.

The TV SoundConnect (TV pairing) failed.

Does your TV support TV SoundConnect?

 TV SoundConnect is supported by some

Samsung TVs r

eleased from 2012 on. Check

your TV to see if it supports TV SoundConnect.

Is your TV firmware the latest version?

 Update your TV with the latest firmwar

Does an error occur when connecting?

 Contact the Samsung Call Centr

 Reset TV SoundConnect and connect again.

To reset the TV SoundConnect connection,

press and hold the

button for 5 seconds.

The red LED on the subwoofer blinks and the

subwoofer is not producing sound.

This issue can occur if the subwoofer is not

connected to the Soundbar main unit.

 T

ry to connect your subwoofer again.

See page 5.

LICENCE

Manufactured under licence from Dolby

Laboratories. Dolby, Dolby Audio and the double-D

symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under licence from DTS Licencing

Limited. DTS, the Symbol, & DTS and the Symbol

together are registered trademarks, and DTS 2.0

Channel is a trademark of DTS, Inc. © DTS, Inc.

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI

Licencing LLC in the United States and other

countries.

· 15 · English

OPEN SOURCE LICENCE NOTICE

To send inquiries and requests regarding open sources, contact Samsung via Email (oss.r[email protected]).

IMPORTANT NOTE ABOUT SERVICE

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

appearance.

SPECIFICATIONS

GENERAL

USB

5V / 0.5A

Weight

Soundbar Main Unit

2.7 kg

Subwoofer

(PS-WJ6000R / PS-WJ6001R)

6.8 kg

Dimensions

(W x H x D)

Soundbar Main Unit

1078.0 x 47.5 x 129.0 mm

Subwoofer

(PS-WJ6000R / PS-WJ6001R)

452.0 x 335.0 x 154.0 mm

Operating Temperature Range

+5°C to +35°C

Operating Humidity Range

10 % to 75 %

AMPLIFIER

Rated Output

Power

Soundbar Main Unit

22W x 6, 4 ohm, THD≦10%

Subwoofer

(PS-WJ6000R / PS-WJ6001R)

168W, 3 ohm, THD≦10%

• Nominal specification

Design and specifications are subject to change without prior notice.

Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

Weight and dimensions are approximate.

For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of Soundbar main unit)

Wireless Models (including the frequency of 5.15GHz-5.35GHz)

• Hereby, Samsung Electronics, declares that this equipment is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.

The original Declaration of Conformity may be found at http://www.samsung.com,

go to Support > Search Product Support and enter the model name.

This equipment may be operated in Jordan.

This equipment may only be used indoors.

Wireless Models (excluding the frequency of 5.15GHz-5.35GHz)

• Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

The original Declaration of Conformity may be found at http://www.samsung.com,

go to Support > Search Product Support and enter the model name.

This equipment may be operated in Jordan.

· 2 · Français

INFORMATIONS RELATIVES À LA SÉCURITÉ

AVERTISSEMENTS

POUR ÉVITER LES RISQUES DE CHOC ÉLECTRIQUE, NE DÉMONTEZ PAS LE CAPOT.

L’APPAREIL NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR ; S’ADRESSER À UN

SERVICE APRÈS-VENTE QUALIFIÉ.

ATTENTION

RISQUE DE CHOC

ÉLECTRIQUE. NE PAS

OUVRIR

Ce symbole indique la présence d’une haute

tension à l’intérieur. Il est dangereux de mettre

en contact quoi que ce soit avec une partie

interne de ce produit.

Ce symbole indique la présence d’importantes

instructions concernant le fonctionnement et la

maintenance jointes avec ce produit.

Produit de classe II : ce symbole indique qu'aucun branchement de sécurité à la terre (prise de

terre) n'est requis.

Tension CA : ce symbole indique que la tension nominale indiquée par le symbole est une

tension CA.

Tension CC : ce symbole indique que la tension nominale indiquée par le symbole est une

tension CC.

Mise en garde, Consulter le mode d'emploi : ce symbole avertit l'utilisateur qu'il doit consulter le

manuel d'utilisation pour en savoir plus sur les informations relatives à la sécurité.

AVERTISSEMENT : Afin de diminuer les risques d’incendie ou de choc électrique, n’exposez pas cet appareil

à la pluie ou à l’ humidité.

ATTENTION : POUR PRÉVENIR LES CHOCS ÉLECTRIQUES, BRANCHEZ LA FICHE AU FOND, EN

PRENANT SOIN D'INSÉRER LA TIGE LARGE DANS LA FENTE LARGE.

• Cet appareil doit toujours être branché à une prise terre.

• Pour déconnecter l’appareil du circuit principal, la prise doit être débranchée de la prise principale ; il est de

ce fait nécessaire que la prise principale soit facile d'accès.

ATTENTION

• Évitez toute projection d’eau sur l’appareil. Ne posez jamais d’objet contenant un liquide (ex : un vase)

dessus.

• Pour éteindre complètement l'appareil, vous devez retirer le cordon d'alimentation de la prise murale. Par

conséquent, le cordon d'alimentation doit être facilement accessible à tout moment.

· 3 · Français

PRÉCAUTIONS

1. Assurez-vous que l'alimentation électrique de votre maison est conforme à la plaque d'identification située au

dos de votre produit. Posez votre produit à plat sur un meuble stable en veillant à laisser un espace de 7 à

10 cm autour de l'appareil afin d’assurer une ventilation correcte de celui-ci. Faites attention à ne pas

obstruer les orifices de ventilation. Ne posez pas l'ensemble sur un amplificateur ou un autre appareil

susceptible de chauffer. Cet ensemble est conçu pour une utilisation en continu. Pour entièrement éteindre

l'appareil, débranchez la fiche CA de la prise murale. Débranchez l'appareil si vous envisagez de ne pas

l'utiliser durant une longue période.

2. En cas d'orage, débranchez la fiche de l'appareil de la prise murale. Les surtensions occasionnées par

l'orage pourraient endommager votre appareil.

3. N'exposez pas l'ensemble aux rayons directs du soleil ou à toute autre source de chaleur.

Ceci pourrait entraîner une surchauffe et un dysfonctionnement de l’appareil.

4. Protégez le produit de l'humidité (comme les vases) et d'une chaleur excessive (comme une cheminée) ou

de tout équipement capable de créer des champs magnétiques ou électriques. Débranchez le câble

d'alimentation en cas de dysfonctionnement. Votre produit n'est pas prévu pour un usage industriel. Ce

produit ne peut être utilisé qu'à des fins personnelles.

Une condensation peut se former si le produit ou un disque a été stocké à basse température.

Si vous devez transporter l'ensemble pendant l'hiver, attendez environ 2 heures que l'appareil ait atteint la

température de la pièce avant de l'utiliser.

5. Les piles utilisées dans ce produit peuvent contenir des produits ch miques dangereux pour l'environnement.

Ne jetez pas les piles dans votre poubelle habituelle. Ne vous débarrassez pas des piles en les faisant brûler.

Ne court-circuitez pas, ne désassemblez pas ni ne faites pas surchauffer les batteries. Le remplacement

incorrect de la batterie entraîne un risque d'explosion.

Ne la remplacez que par une batterie du même type.

ATTENTION, NE PAS INGÉRER LA BATTERIE, RISQUE DE BRÛLURE CHIMIQUE,

[Télécommande fournie avec] Ce produit contient une pile par pièce/bouton.

Si vous avalez la pile par pièce/bouton, cela peut entraîner des brûlures internes graves en seulement

2 heures et vous pouvez mourir. Maintenez les piles neuves et usagées hors de portée des enfants.

Si le compartiment de la pile ne se ferme pas correctement, arrêter d'utiliser l'appareil et maintenez-le hors de portée

des enfants. Si vous pensez qu'il est possible que les piles aient été avalées ou placées à l'intérieur d'une partie du

corps, consultez immédiatement un médecin.

· 4 · Français

CONTRÔLE DES COMPOSANTS

Caisson de basse

1 Cordon

d'alimentation

Unité Principale Soundbar

2 Adaptateur CA/CC

3 Cordon

d'alimentation

Télécommande/Pile Câble HDMI

CONNEXION À L'ALIMENTATION ÉLECTRIQUE

Utilisez les composants d’alimentation (1, 2, 3) pour connecter les alimentations électriques dans l’ordre

suivant : Caisson de basse  Unité Principale Soundbar

c Pour plus d'informations sur l'alimentation et la consommation électriques, r

eportez-vous à l'étiquette collée

sur le produit. (Étiquette : Bas de l’Unité Principale Soundbar)

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

DC 14V

POWER

DC 14V

(Prise d'alimentation)

Connexion à l'alimentation

électrique

1 Cordon

d'alimentation

2 Adaptateur CA/CC

3 Cordon d'alimentation

Arrière du caisson

de basse

Arrière de l’unité Principale de la

Soundbar

c Veillez à poser l'adaptateur CA/CC à plat sur une table ou sur le sol. Si l'adaptateur CA/CC pend et que

l'entrée du cordon CA est située face vers le haut, de l'eau ou d'autres substances étrangères risquent de

pénétrer dans l'adaptateur et d'entraîner des dysfonctionnements.

· 5 · Français

CONNEXION DU SUBWOOFER À L’UNITÉ PRINCIPALE

SOUNDBAR

Vous pourrez profiter de sons graves riches et d’une meilleure qualité de son en reliant le subwoofer à l’unité

principale Soundbar.

Caisson de basse

Unité Principale Soundbar

Unité

oundbar

ndbar

L’unité principale Soundbar et le subwoofer doivent être appariés (raccordés sans fil) automatiquement lorsqu’ils

sont mis sous tension. Lorsque la connexion automatique est terminée, le témoin bleu situé devant le subwoofer

cesse de clignoter et reste allumé.

c Si ce témoin s'allume en rouge ou continue de clignoter en bleu, c'est que le subwoofer ne s'est pas

connecté automatiquement

. Dans ce cas, suivez les instructions ci-dessous pour le connecter manuellement.

c Important : Avant de commencer, insérez la pile dans la télécommande. Reportez-vous à la page 12 pour

prendre connaissance des instructions.

POWER

1. Branchez les cordons électriques de l’unité principale Soundbar et du subwoofer sur une prise murale CA.

2. Appuyez pendant 5 secondes sur le bouton ID SET situé à l’arrière du caisson de basse. Le voyant rouge

situé à l’avant du caisson de basses s'éteint et le voyant bleu clignote rapidement.

3. Appuyez sur la touche

de votre télécommande pendant 5 secondes lorsque l’unité principale Soundbar

est ÉTEINTE.

4. Le message ID SET s’affiche brièvement sur l’unité principale Soundbar, avant de disparaître.

ID SET

· 6 · Français

5. Pendant que le témoin du subwoofer clignote en bleu, appuyez sur la touche de votre télécommande ou

en haut de l'unité principale de la Soundbar pour la mettre sous tension.

6. La connexion est terminée si le témoin situé à l'avant du subwoofer arrête de clignoter et reste allumé.

c Si le processus de connexion échoue, le voyant bleu clignote en continu. Passez à l'étape 2 et recommencez.

Passez au vrai son surround sans fil en connectant votre kit d'enceintes arrière

sans fil Samsung (SWA-8000S) à votre Soundbar. (Vendu séparément)

c Pour obtenir plus d’informations à ce sujet, reportez-vous au manuel Web.

CONNEXION À VOTRE TÉLÉVISEUR

Vous permet d'écouter le son de votre téléviseur sur votre Soundbar après avoir raccordé cette dernière, avec

ou sans câble.

c Important : Avant de commencer, insérez la pile dans la télécommande. Reportez-vous à la page 12 pour

prendre connaissance des instructions.

Méthode 1. Connexion avec un câble

HDMI OUT

(TV-ARC)

Dessous de la Soundbar

HDMI IN

(TV-ARC)

Soundbar

Câble HDMI

Contrôlez le port HDMI OUT (TV-ARC)

sur l’unité principale Soundbar.

Vérifiez le port (TV-ARC) at

HDMI IN de votre téléviseur.

1. Connectez le câble HDMI comme indiqué sur le schéma ci-dessus.

2. TV ARC apparaît à l'écran de l'appareil et le son du téléviseur est émis.

TV ARC

c Si le son de votre téléviseur est inaudible, appuyez sur la touche en haut de votre Soundbar ou sur la

touche SOURCE de la télécommande pour passer en mode D.IN sur l'affichage de l'unité principale de la

Soundbar. Ensuite, le mode D.IN passe sur TV ARC et vous entendez de nouveau le son de votre téléviseur.

c Si l'affichage de l'unité principale de la Soundbar ne passe pas sur TV ARC, vérifiez que le câble est bien

branché.

c Vous pouvez facilement contrôler le volume de la Soundbar et verrouiller l'alimentation électrique.

La page charge ...

Samsung HW-J6001R Guide de démarrage rapide

Marque: Samsung

Modèle: HW-J6001R

Catégorie: Cheminées

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

English: Samsung HW-J6001R Quick start guide

Samsung HW-J6001R Guide de démarrage rapide

Samsung HW-J6001R Guide de démarrage rapide

dans d''autres langues

Documents connexes