Instruction Manual
WWW.LIVOO.FR
Reference : TEA268
Version : 1.1
Language : English
Wireless charger fast charge
Instruction Manual
1
Thank you for buying our LIVOO product. We take great care in design, ergonomics and ease of use of our
products. We hope that this product will give you complete satisfaction.
This instruction manual is also available on our website
www.livoo.fr
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THE APPLIANCE FOR THE FIRST TIME, PLEASE READ CAREFULLY THESE INSTRUCTIONS BEFORE USING
THE APPLIANCE AND SAVE IT FOR ANY FURTHER NEED.
o Do not use other cable than that supplied with the product.
o In case of dysfunction, entrust your wireless charger to a specialist.
o No pieces can be repaired or replaced by the user.
o Any signs of wear and tear please discard immediately.
o Maintain your product shielded from dust, rain, water or from humidity.
o Do not subject your product to sources of inflammation or important heat. Do not throw it to the fire.
o Do not place the wireless charger near magnets.
o Maintain your product out of reach children.
o Wipe clean with a damp cloth only. Do not use detergents.
SPECIFICATIONS
USB Input : 5V 2A ; 9V 2A ; 12V 1,67A
USB Output : 5W/7.5W/10W/15W
Frequency : 108.8 kHz – 160.4 kHz
RF Field Output : 15W Max
Charging Efficiency : ≥ 65%
Charging Distance : ≤ 6 mm
Package included:
1x Wireless Charger
1x USB/Type C cable
1x User Manual
Introduction
The wireless charger is an intelligent product, with simple design and compatible with any mobile phones
with QI standard. Mobile phone is without plug when charging, which is more convenient. If your mobile is
not QI you can still enjoy this product by using the wireless receivers (not included).
Instruction Manual
2
DESCRIPTION
1. Input port
2. LED indicator
3. Transmitter
GENERAL OPERATION
Instructions
1. Insert one end of USB charging cable (included) into power adaptor or
computer.
2. Insert another end of charging cable into Type C port of the wireless
charger. The LED indicator lights up in red, indicating the charger is
now ready to use.
3. If your mobile is not equipped with QI technology, please select the
correct receiver (not included) and plug the compatible receiver on the
proper input of your phone.
4. Place your phone onto the wireless charger. When the mobile is being
charged, the LED indicator will light up automatically in blue. Your
device is now charging.
5. When your mobile device is fully charged, the blue and red light
indicator switch off.
6. When the red LED or blue LED indicator flashes quickly, that means
there is improper operation.
7. Disconnect the wireless charger after use.
Notes
1. If the transmitter is working improperly, clean the clutters on the wireless transmitter.
2. If the wireless transmitter is over-heating, take your mobile away from the device. Let the transmitter
cool down before trying to charge the mobile again.
3. If the wattage of the power adapter you use needs more than 7.5W, we suggest you use the adapter
with
5V 2A
output.
4. It’s normal that the charger and mobile phone get hot under operating conditions and it may be even
hotter when charging and using at the same time (like listening to music for example).
Instruction Manual
3
EU DECLARATION OF CONFORMITY
We
DELTA
BP61071
67452 Mundolsheim – France
Herewith declare under our sole responsibility, that the radio equipment
Wireless charger fast charge
TEA268 (Frequency range
108.8 kHz – 160.4 kHz
)
Fulfils the essential requirements of the Directive 2014/53/UE
The following standards were applied:
DIRECTIVES NORMES ou Exigences
(ROHS) 2011/65/EU L’objet de la déclaration décrit ci-dessus est conforme à la directive
2011/65/UE du Parlement européen et du Conseil du 8 juin 2011 relative à la
limitation de l’utilisation de certaines substances dangereuses dans les
équipements électriques et électroniques.
EU 2011/65/EU et EU 2015/863
(RED- EMC) 2014/53/EU EN 303 417 V1.1.1 / EN 301 489-1 V2.2.3/ EN 301 489-3 V2.1.1
EN 62368-1:2020 + A11 2020
EN 62311:2020
EN 55032:2015+A1:2020
Mundolsheim le 20/12/2022
Instruction Manual
4
Correct disposal of the unit
(Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems
countries)
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in the normal household waste stream.
Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and
reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to
remind the obligations of separate collection. Consumers should contact their local authority or retailer for information
concerning the correct disposal of their product.
• Non contractual illustration
• Product information is subject to change without prior notice
LIVOO
BP 61071
67452 Mundolsheim - FRANCE
-
1
-
2
-
3
-
4
-
5
Livoo TEA268 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Livoo TEA268 User manual
Documents connexes
-
Livoo TES256 Manuel utilisateur
-
-
-
-
Livoo TEC618 Manuel utilisateur
-
-
-
Livoo DOH135 Manuel utilisateur
-
-
Livoo AR321 Sunrise Simulator Alarm Clock Manuel utilisateur