Midmark 253 Ritter LED Examination Light Mode d'emploi

Taper
Mode d'emploi
User Guide
253
LED Examination Light
003-2181-99 Rev AA4 (9/21/22)
TP202 20-42-FO-00014 Rev A1 C2169
English
Español
Français
Style P
© Midmark Corporation 2016
English - 2 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
MA8173i
Model / Serial Number:
Date of Purchase:
Midmark Authorized Service
Company:
Dealer:
Product Information
Model / Serial
Number Location
© Midmark Corporation 2016
English - 3 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Table of Contents
Important Information
Safety Symbols ...........................................................................................................4
Transportation & Storage Conditions ..........................................................................4
Before First Use .....................................................................................................................5
Intended Use ..............................................................................................................5
Electromagnetic Interference ......................................................................................5
Disposal of Equipment ................................................................................................5
Operation
Power ON / OFF ......................................................................................................... 6
Automatic Shuto Feature .......................................................................................... 7
Light Pattern Adjustment ...........................................................................................8
Maintenance
Fuse Replacement .....................................................................................................9
Troubleshooting ........................................................................................................10
Calling for Service ....................................................................................................10
Cleaning ...................................................................................................................10
Preventative Maintenance ........................................................................................ 10
Specications
Specications Chart .................................................................................................. 11
Model Identication / Compliance Chart ..........................................................................12
Warranty Information
Limited Warranty ......................................................................................................13
© Midmark Corporation 2016
English - 4 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
WARNING
Indicates a potentially hazardous situation which could result in serious injury.
Equipment Alert
Indicates a potentially hazardous situation which could result in equipment damage.
Caution
Indicates a potentially hazardous situation which may result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Proper Shipping
Orientation
Fragile
Keep Dry
Consult User Guide
Transportation / Storage Conditions
Ambient Temperature Range .................................................................-22°F to 140°F (-30°C to +60°C)
Relative Humidity......................................................................................10% to 90% (non-condensing)
Atmospheric Pressure ............................................................................................ 500 hPa to 1060 hPa
Type B
Applied Part
Fuse Rating
Specication
Power ON / OFF
Bright Light
(Do not look directly into light)
140 F
60 C
-22 F
-30 C
Humidity Limit
Pressure Limit
Temperature Limit
Manufacturer
Catalogue Number
Serial Number
Important Information - Safety Symbols
These symbols may appear on your equipment and/or in the manuals.
© Midmark Corporation 2016
English - 5 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Before First Use...
Intended Use
The Ritter 253 provides focusable illumination for general examinations and procedures performed by
trained professionals in a healthcare environment.
Electromagnetic Interference
This product is designed and built to minimize electromagnetic interference with other devices. However, if
interference is noticed between another device and this product:
Remove interfering device from room
Plug light into isolated circuit
Increase separation between light and interfering device
Contact Midmark if interference persists
Disposal of Equipment
At the end of product life, the light, accessories, and other consumable goods may become contaminated
from normal use. Consult local codes and ordinances for proper disposal of equipment, accessories and
other consumable goods.
MA8201i
Remove protective film from lens...
Pull tab to peel protective film from lens.
Protective Film
WARNING
This product can expose you to chemicals including Antimony Oxide
(Antimony Trioxide), which is known to the state of California to cause cancer.
For more information go to www.p65warnings.ca.gov
© Midmark Corporation 2016
English - 6 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Operation
Power ON / OFF
MA8171i
Note
The light has an automatic shutoff feature that turns the light
OFF after two hours. Refer to Automatic Shutoff Feature
section for more information.
To connect power to the light...
A) Connect power cord to light housing.
B) Plug cord into properly rated receptacle.
Note: When power is connected, the lighthead will flash
several times, and the indicator light will illuminate.
To turn the light ON / OFF...
Press the power button.
Indicator Light Power Button
© Midmark Corporation 2016
English - 7 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Automatic Shuto Feature
The Automatic Shuto Feature turns the light OFF two hours after the last power button press.
MA8170i
Power Button
To enable the Automatic Shutoff Feature...
A) Press & hold the power button for 5 seconds.
B) Observe. The lighthead will flash three times
indicating the feature has been enabled.
Note: To disable this feature, repeat the procedure.
The lighthead will flash four times when this feature
is disabled
Note
Lights are shipped from the factory with this feature disabled.
© Midmark Corporation 2016
English - 8 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
To adjust the size of the light pattern...
Rotate the lighthead clockwise / counterclockwise.
Light Pattern Adjustment
MA8169i
Min: 4" (10 cm)
Max: 12" (30 cm)
Focal Distance:
16" (41 cm)
© Midmark Corporation 2016
English - 9 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Maintenance
Fuse Replacement
MA8172i
To replace fuses...
A) Disconnect power cord from light housing.
B) Press tab & pull fuse holder out of cord inlet.
C) Replace fuses.
D) Push fuse holder into inlet until it locks in place.
Tab
Fuse Holder
Fuse Specifications:
1.6 amp, 250VAC, 5mm x 20mm
Type T, low breaking capacity IEC 127-2/3
© Midmark Corporation 2016
English - 10 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Troubleshooting
Calling for Service
If service is required, contact your authorized Midmark dealer.
To contact Midmark® directly:
1.800.MIDMARK (1.800.643.6275)
8:00 am until 5:00 pm Monday - Friday (EST)
midmark.com
Cleaning
Clean the painted metal and plastic surfaces using a clean soft cloth, and mild cleaner.
Disinfect your product with a solution of standard bleach and water mixed 1 in 10 (10%) or chlorine based
cleaners. Follow this with a clear water rinse and thorough drying of material. See current CDC Guideline for
Disinfection and Sterilization in Healthcare Facilities.
Preventative Maintenance
Periodically inspect the following:
• Power cord should be free of cuts or other visible damage.
All fasteners should be in place and tightened securely.
Have an authorized service technician inspect your equipment periodically.
Note
Model / serial number information is required when calling for service.
Problem Possible Cause Correction
Light will not turn ON.
(Power indicator light: OFF)
Power cord is not connected. Secure power cord connections.
Faulty fuse(s). Replace fuses.
(Refer to procedure in this manual)
Light will not turn ON.
(Power indicator light: ON)
Lighthead or ex arm
malfunctioning.
Contact authorized Midmark
service technician.
Light pattern will not adjust. Lighthead malfunctioning. Contact authorized Midmark
service technician.
Light turns OFF by itself. Automatic Shuto Feature Disable automatic shuto feature.
(Refer to procedure in this manual)
© Midmark Corporation 2016
English - 11 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Specications
Specications Chart
LED Life: approximately 50,000 hr* (non-replaceable)
* per bulb manufacturer
Light Pattern Circular
Adjustable Spot Size @
Focal distance: 16” (41 cm) Diameter: 4" (10 cm) to 12" (30 cm)
Illumination @
Focal distance: 16” (41 cm)
Spot size: 4” (10 cm)
1,700 foot-candles / 18,298 lux
Color Temperature 4,500K
Power Cord Length 8 ft. (2.5 m)
Flex Arm Reach
[from power source enclosure] 54.5” (138 cm)
Flex Arm Rotation
[at power source enclosure] 140°
Electrical Rating 115 VAC, 50/60 Hz, 100mA
230 VAC, 50/60 Hz, 60mA
Fuses 1.6 amp, 250V, 5mm x 20mm, Type T
low breaking capacity IEC 127-2/3
Regulatory Compliance UL 60601-1 Rev. 26-Apr-06
CAN/CSA C22.2 No. 60601-1:08
Canadian Medical Device Regulations 5OR/98-282
NFPA99 (applicable to product requirements)
Classication Class 1, Type B Applied Part
WARNING
Equipment is not suitable for use in the presence of a flammable anesthetic
mixture with oxygen, air, or nitrous oxide.
Clarification: Equipment is suitable for use in the presence of oxygen, air, or nitrous oxide.
© Midmark Corporation 2016
English - 12 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Model Identication / Compliance Chart
Model Description
Complies To: Electrical Ratings:
UL
60601-1
Rev 26-Apr-06
CAN / CSA
C22.2,
#60601.1:08
Canadian
Medical
Device
Regulations
5OR/98-282
NFPA
99
VAC
+/- 10% Amps Cycles
(Hz)
253-001 LED Exam Light only 115 100mA 50/60
230 60mA 50/60
253-002 Includes 253-001 and 9A454001
(Spline Mount) - - - - - - -
253-003 Includes 253-001 and 9A455001
(Extended Spline Mount) - - - - - - -
253-005 Includes 253-001 and 9A457001
(Base Rail Mount) - - - - - - -
253-006 Includes 253-001 and 9A458001
(Caster Base) - - - - - - -
253-007 Includes 253-001 and 9A474001
(Wall Mount) - - - - - - -
253-011 LED Exam Light only 115 100mA 50/60
230 60mA 50/60
253-012 Includes 253-011 and 9A619001
(Standard Spline Mount) - - - - - - -
253-013 Includes 253-011 and 9A620001
(Extended Spline Mount) - - - - - - -
253-015 Includes 253-011 and 9A622001
(Base Rail Mount) - - - - - - -
253-016 Includes 253-011 and 9A628001
(Caster Base) - - - - - - -
253-017 Includes 253-011 and 9A623001
(Wall Mount) - - - - - - -
© Midmark Corporation 2016
English - 13 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
SCOPE OF WARRANTY Midmark Corporation (“Midmark”) warrants to the original retail purchaser that it will, at Midmark’s option, repair or
replace components of the domestic and international medical products manufactured by Midmark (except for components not warranted
under “Exclusions”) that are defective in material or workmanship under normal use and service. The sole remedy under this limited warran-
ty is the repair or replacement, at Midmark’s option, of the applicable components. This limited warranty shall only apply to defects that are
reported to Midmark within the applicable warranty period and which are determined to exist upon examination by Midmark,. This warranty
extends only to the original retail purchaser of a product and is not transferable or assignable. Replacement components or products may
be used and/or refurbished components or products, provided they are of like quality and speci cations as new components or products.
Midmark warrants to the original retail purchaser that during the applicable warranty period it will repair or replace software contained
within the products manufactured by Midmark (except for those not warranted under “Exclusions”) if: (1) the media on which the software is
furnished exhibits defects in material or workmanship under normal use; or (2) the software does not substantially conform to its published
speci cations.
APPLICABLE WARRANTY PERIOD The applicable warranty period, measured from the date of invoice to the original retail purchaser of
the product and shall be one (1) year for all warranted products and components. QuickClean® Ultrasonic Cleaners are warranted for a
period of three (3) years.
OBTAINING WARRANTY SERVICE Warranty service must be obtained through either Midmark or an authorized dealer in the Midmark
product line for which warranty service is requested. Midmark may be contacted for warranty service inquiries or issues via email at
midmark.com; by phone at 1.800.MIDMARK or by mail to Midmark Corporation, 60 Vista Drive, Versailles, Ohio 45380. It is the retail pur-
chasers obligation to arrange for delivery of a product to Midmark or one of its authorized dealers for warranty service, which delivery shall
be at retail purchasers expense. It is also the retail purchaser’s obligation to comply with the warranty service instructions provided either
by Midmark or its authorized dealer. The retail purchaser must provide Midmark with completed warranty registration information within
thirty (30) days after purchase in order to obtain the bene ts of this limited warranty.
EXCLUSIONS: This limited warranty does not cover and Midmark shall not be liable for the following:
(1) Defects, damage or other conditions caused, in whole or in part, by misuse, abuse, negligence, alteration, accident, freight damage,
negligent storage, tampering or failure to seek and obtain repair or replacement in a timely manner;
(2) Products which are not installed, used, and properly cleaned and maintained as required or recommended in the Midmark “Installation”
and/or “Installation/Operation Manual” for the applicable product, including the speci ed structural and operational environmental conditions
and electrical requirements;
(3) Products considered to be of a consumable or sterile nature;
(4) Accessories or parts not manufactured by Midmark;
(5) Charges by anyone for adjustments, repairs, replacement parts, installation or other work performed upon or in connection with such
products which are not expressly authorized in writing in advance by Midmark;
(6) Costs and expenses of routine maintenance and cleaning; and
(7) Representations and warranties made by any person or entity other than Midmark.
(8) Matching of color, grain or texture except to commercially acceptable standards;
(9) Changes in color caused by natural or arti cial light;
(10) Custom manufactured products;
(11) Alterations or modi cations to the product by any person or entity other than Midmark; and
(12) Products that would otherwise by covered under this limited warranty, but are acquired: (i) from a person or entity that is not Midmark
or one of its authorized dealers; or (ii) from a Midmark dealer that is not authorized to sell the product at issue in the geographic territory
where the purchaser is located, or is not authorized to sell the product at issue within the medical market.
SOFTWARE; WITH RESPECT TO SOFTWARE THAT IS A PRODUCT OR COMPONENT THEREOF, MIDMARK DOES NOT WARRANT
THAT THE SOFTWARE: (1) IS ERROR FREE; (2) CAN BE USED WITHOUT PROBLEMS OR INTERRUPTIONS; OR (3) IS FREE FROM
VULNERABILITY TO INTRUSION OR ATTACK BY VIRUSES OR OTHER METHODS.
EXCLUSIVE REMEDY; CONSEQUENTIAL DAMAGES DISCLAIMER MIDMARK’S ONLY OBLIGATION UNDER THIS LIMITED WARRAN-
TY IS THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS. MIDMARK SHALL NOT BE LIABLE FOR AND HEREBY DISCLAIMS
ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES OR DELAYS, INCLUDING, BUT
NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR INCOME, LOSS OF USE, LOSS OF DATA, DOWNTIME, COVER AND
EMPLOYEE OR INDEPENDENT CONTRACTOR WAGES, PAYMENTS AND BENEFITS. THIS DISCLAIMER SHALL SURVIVE ANY
FAILURE OR ASSERTED FAILURE OF THE ESSENTIAL PURPOSE OF THIS LIMITED WARRANTY OR ITS REMEDIES SPECIFIED
HEREIN. WARRANTY DISCLAIMER THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRAN-
TIES, EXPRESS OR IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACE-
MENT OF DEFECTIVE PARTS.
STATUTE OF LIMITATIONS No action may be brought against Midmark for breach of this limited warranty, an implied warranty, if any, or for
any other claim arising out of or relating to the products, more than ninety (90) days following expiration of the limited warranty period.
NO AUTHORIZATION No person or  rm is authorized to create or approve for Midmark any other obligation or liability in connection with
the products.
Midmark® + Ritter® Medical Equipment (Tables, Chairs, Physician
Seating, Lights, Workstations and Sterilizers) Limited Warranty
© Midmark Corporation 2016
English - 14 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Notes:
© Midmark Corporation 2016
English - 15 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Midmark Corporation
60 Vista Drive
Versailles, OH 45380 USA
1.800.643.6275
1.937.526.3662
midmark.com
003-2181-99
Guía del usuario
253
Lámpara LED de exploración
TP202 20-42-FO-00014 Rev A1 C2169
English
Español
Français
© Midmark Corporation 2016
Español - 2 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
MA8173i
Modelo/número de serie:
Fecha de compra:
Servicio técnico autorizado
por Midmark:
Distribuidor:
Información del producto
Ubicación del
modelo/número
de serie
© Midmark Corporation 2016
Español - 3 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
Índice
Información importante
Símbolos de seguridad .........................................................................................................4
Condiciones de transporte y almacenamiento ..................................................................4
Antes del primer uso .............................................................................................................5
Uso previsto ...........................................................................................................................5
Interferencia electromagnética ............................................................................................5
Eliminación de equipos ......................................................................................................... 5
Funcionamiento
Encendido/apagado ..............................................................................................................6
Función de apagado automático ......................................................................................... 7
Ajuste del patrón de luz ........................................................................................................8
Mantenimiento
Sustitución fusibles ...............................................................................................................9
Resolución de problemas ................................................................................................... 10
Solicitud de servicio técnico ............................................................................................... 10
Limpieza ...............................................................................................................................10
Mantenimiento preventivo ..................................................................................................10
Especicaciones
Tabla de especicaciones .................................................................................................. 11
Identicación del modelo/Tabla de cumplimiento de las normativas ...........................12
Información sobre la garantía
Garantía limitada .................................................................................................................13
© Midmark Corporation 2016
Español - 4 TP202 20-42-FO-00014 Rev A1 C2169
003-2181-99
ADVERTENCIA
Indica una situación potencialmente peligrosa que podría ocasionar lesiones graves.
Advertencia sobre el equipo
Indica una situación potencialmente peligrosa que podría provocar daños en el equipo.
Precaución
Indica una situación potencialmente peligrosa que puede ocasionar lesiones leves o moderadas.
También puede usarse para alertar contra prácticas peligrosas.
Método de transporte
orientación correcto
Frágil
Mantener seco
Consulte la guía
del usuario
Condiciones de transporte y almacenamiento
Rango de temperatura ambiente ...............................................de -30 °C a +60 °C (de -22 °F a 140 °F)
Humedad relativa .............................................................................de 10 % a 90 % (sin condensación)
Presión atmosférica ............................................................................................ de 500 hPa a 1060 hPa
Pieza aplicada
Tipo B
Especicaciones
nominales del fusible
Encendido/apagado
Luz clara
(No mire directamente a la luz)
140 F
60 C
-22 F
-30 C
Límite de humedad
Límite de presión
Límite de
temperatura
Fabricante
Número de serie
Número del catálogo
Información importante - símbolos de seguridad
Estos símbolos pueden aparecer en su equipamiento y/o en los manuales.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Midmark 253 Ritter LED Examination Light Mode d'emploi

Taper
Mode d'emploi