Ubiquiti RD-5G31-AC Mode d'emploi

RD-5G31-AC
Ubiquiti
Marque
Ubiquiti
Modèle
RD-5G31-AC
Catégorie
Antennes réseau
Taper
Mode d'emploi

Ce manuel convient également à

Dish Antenna with Radome Mounting Bracket Protective Shroud
Pole Clamps (Qty. 2) Stabilizer Brackets (Qty. 2) RF Cables (Qty. 2)
Elevation Rod M10x170 Carriage Bolts (Qty.
4)
M10x100 Bolts (Qty. 2)
M10x25 Carriage Bolts (Qty.
3)
Package Contents
RD-5G31-AC Quick Start Guide
Installation Requirements
5 GHz Rocket® radio (sold separately)
16 mm or 5/8" wrench
24 mm or 15/16" wrench
Shielded Category 5 (or above) cabling should be used for all wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade, shielded Ethernet
cable from Ubiquiti. For more details, visit ui.com/toughcable
Hardware Installation
IMPORTANT: Carefully handle the Dish Antenna with Radome. Deformations
in its shape may reduce the antenna's effectiveness.
1.
2.
RD-5G31-AC Quick Start Guide
3.
4.
RD-5G31-AC Quick Start Guide
5.
6.
RD-5G31-AC Quick Start Guide
7.
8.
9.
RD-5G31-AC Quick Start Guide
10.
11.
12.
RD-5G31-AC Quick Start Guide
13.
14.
RD-5G31-AC Quick Start Guide
15.
16.
RD-5G31-AC Quick Start Guide
Specifications
RocketDish RD-5G31-AC
Dimensions 748 x 748 x 349 mm (29.45 x 29.45 x 13.74")
Weight 7.6 kg (16.76 lb)
(Mount Included)
Frequency 5.1 - 5.8 GHz
Gain 31 dBi
Max. VSWR 1.4:1
Wind Survivability 200 km/h (125 mph)
Wind Loading 1,028 N @ 200 km/h (231 lbf @ 125 mph)
Polarization Dual Linear
Cross-Pol Isolation 35 dB Min.
ETSI Specification EN 302 326 DN2
Mounting Universal Pole Mount, RocketM Bracket, and
Weatherproof RF Jumpers Included
Safety Notices
RD-5G31-AC Quick Start Guide
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote
risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire hazard if
the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided
only by a qualified service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis,
and, where applicable, specify arbitration instead of jury trials or class actions.
Compliance
RF Exposure Warning
The antenna and transmitter must be installed to provide a separation distance from all persons
and must not be located or operating in conjunction with any other antenna or transmitter. For
the specific separation distance, refer to the Quick Start Guide for your Rocket device
(transmitter).
L’antenne et l’émetteur doit être installé pour fournir une distance de séparation de toute les
personnes et ne doit pas être situé ou opérant en conjonction avec une autre antenne ou un
autre émetteur. Pour la distance spécifique de séparation, se référer au Guide de démarrage
rapide pour votre appareil Rocket (l’émetteur).
WEEE Compliance Statement
Declaration of Conformity
Online Resources
RD-5G31-AC Quick Start Guide
© 2022 Ubiquiti Inc. All rights reserved.
RD-5G31-AC Quick Start Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Ubiquiti RD-5G31-AC Mode d'emploi

RD-5G31-AC
Ubiquiti
Marque
Ubiquiti
Modèle
RD-5G31-AC
Catégorie
Antennes réseau
Taper
Mode d'emploi
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes