Sony SLT A37 Mode d'emploi

SLT-A37 4-420-752-41 (1)

C:\data\Cover-12lang\12_00COV-SLTA37U2\010COV.fm

master: Right

SLT-A37

4-420-752-41(1)

4-420-75 2-41(1)

SLT-A37

A-mount

Interchangeable Lens Digital Camera/Instruction Manual GB

Appareil photo à objectif interchangeable/Mode d’emploi FR

Digitalkamera mit Wechselobjektiv/Gebrauchsanleitung DE

Cámara Digital de Lentes Intercambiables/Manual de instrucciones ES

Fotocamera digitale con obiettivo intercambiabile/Istruzioni per l’uso IT

Camara Digital de Objectivas intercambiáveis/Manual de instruções PT

Digitale camera met verwisselbare lens/Gebruiksaanwijzing NL

Aparat cyfrowy z wymiennymi obiektywami/Instrukcja obsługi PL

Digitalkamera med utbytbart objektiv/Handledning SE

Digitaalinen kamera vaihdettavalla objektiivilla/Käyttöopas FI

Digitalkamera med utskiftbart objektiv/Bruksanvisning NO

Digitalkamera med udskifteligt objektiv/Betjeningsvejledning DK

010COV.fm Page 1 Thursday, March 22, 2012 5:10 PM

C:\data\Cover-12lang\12_00COV-SLTA37U2\100BCO.fm

master: Right

SLT-A37

4-420-752-41(1)

100BCO.fm Page 96 Thursday, March 22, 2012 5:11 PM

GB

2

Owner’s Record

The model and serial numbers are located

on the bottom.

Record the serial number in the space

provided below.

Refer to these numbers whenever you call

upon your Sony dealer regarding this

product.

Model No. SLT-A37

Serial No. __________________________

To reduce fire or shock hazard, do

not expose the unit to rain or

moisture.

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE

INSTRUCTIONS.

DANGER - TO

REDUCE THE RISK

OF FIRE OR

ELECTRIC SHOCK,

CAREFULLY

FOLLOW THESE

INSTRUCTIONS.

If the shape of the plug does not fit the

power outlet, use an attachment plug

adaptor of the proper configuration for the

power outlet.

Battery pack

If the battery pack is mishandled, the

battery pack can burst, cause a fire or even

chemical burns. Observe the following

cautions.

• Do not disassemble.

• Do not crush and do not expose the

battery pack to any shock or force such as

hammering, dropping or stepping on it.

• Do not short circuit and do not allow

metal objects to come into contact with

the battery terminals.

• Do not expose to high temperature above

60°C (140°F) such as in direct sunlight or

in a car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking

lithium ion batteries.

• Be sure to charge the battery pack using a

genuine Sony battery charger or a device

that can charge the battery pack.

English

A-mount

WARNING

Caution

3

GB

• Keep the battery pack out of the reach of

small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent

type recommended by Sony.

• Dispose of used battery packs promptly

as described in the instructions.

Battery charger

Even if the CHARGE lamp is not lit, the

battery charger is not disconnected from the

AC power source (mains) as long as it is

connected to the wall outlet (wall socket).

If some trouble occurs while using the

battery charger, immediately shut off the

power by disconnecting the plug from the

wall outlet (wall socket).

The power cord (mains lead), if supplied, is

designed specifically for use with this

camera only, and should not be used with

other electrical equipment.

RECYCLING LITHIUM-ION

BATTERIES

Lithium-Ion batteries are

recyclable.

You can help preserve

our environment by

returning your used

rechargeable batteries to

the collection and

recycling location nearest you.

For more information regarding recycling

of rechargeable batteries, call toll free

1-800-822-8837, or visit http://

www.rbrc.org/

Caution: Do not handle damaged or

leaking Lithium-Ion batteries.

Battery Pack and lens

This device complies with Part 15 of the

FCC Rules, Operation is subject to the

following two conditions:

(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

This Class B digital apparatus complies

with Canadian ICES-003.

UL is an internationally recognized safety

organization.

The UL Mark on the product means it has

been UL Listed.

If you have any questions about this

product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669)

The number below is for the FCC related

matters only.

Regulatory Information

CAUTION

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

For Customers in the U.S.A.

and Canada

For Customers in the U.S.A.

Declaration of Conformity

Trade Name: SONY

Model No.: SLT-A37

Responsible Party: Sony Electronics

Inc.

Address:16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This

device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

GB

4

Note:

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the user

is encouraged to try to correct the

interference by one or more of the

following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

The supplied interface cable must be used

with the equipment in order to comply with

the limits for a digital device pursuant to

Subpart B of Part 15 of FCC Rules.

Notice for the customers in the

countries applying EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku

Tokyo, 108-0075 Japan. The Authorized

Representative for EMC and product safety

is Sony Deutschland GmbH, Hedelfinger

Strasse 61, 70327 Stuttgart, Germany. For

any service or guarantee matters please

refer to the addresses given in separate

service or guarantee documents.

This product has been tested and found

compliant with the limits set out in the

EMC Directive for using connection cables

shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific

frequencies may influence the picture and

sound of this unit.

Notice

If static electricity or electromagnetism

causes data transfer to discontinue midway

(fail), restart the application or disconnect

and connect the communication cable

(USB, etc.) again.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall

not be treated as household waste. Instead it

shall be handed over to the applicable

collection point for the recycling of

electrical and electronic equipment. By

ensuring this product is disposed of

correctly, you will help prevent potential

negative consequences for the environment

and human health, which could otherwise

be caused by inappropriate waste handling

of this product. The recycling of materials

will help to conserve natural resources. For

more detailed information about recycling

of this product, please contact your local

Civic Office, your household waste

disposal service or the shop where you

purchased the product.

For Customers in Europe

5

GB

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the

packaging indicates that the battery

provided with this product shall not be

treated as household waste.

On certain batteries this symbol might be

used in combination with a chemical

symbol. The chemical symbols for mercury

(Hg) or lead (Pb) are added if the battery

contains more than 0.0005% mercury or

0.004% lead.

By ensuring these batteries are disposed of

correctly, you will help prevent potentially

negative consequences for the environment

and human health which could otherwise be

caused by inappropriate waste handling of

the battery. The recycling of the materials

will help to conserve natural resources.

In case of products that for safety,

performance or data integrity reasons

require a permanent connection with an

incorporated battery, this battery should be

replaced by qualified service staff only.

To ensure that the battery will be treated

properly, hand over the product at end-of-

life to the applicable collection point for the

recycling of electrical and electronic

equipment.

For all other batteries, please view the

section on how to remove the battery from

the product safely. Hand the battery over to

the applicable collection point for the

recycling of waste batteries.

For more detailed information about

recycling of this product or battery, please

contact your local Civic Office, your

household waste disposal service or the

shop where you purchased the product.

A moulded plug complying with BS 1363

is fitted to this equipment for your safety

and convenience.

Should the fuse in the plug supplied need to

be replaced, a fuse of the same rating as the

supplied one and approved by ASTA or

BSI to BS 1362, (i.e., marked with an or

mark) must be used.

If the plug supplied with this equipment has

a detachable fuse cover, be sure to attach

the fuse cover after you change the fuse.

Never use the plug without the fuse cover.

If you should lose the fuse cover, please

contact your nearest Sony service station.

Notice for customers in the

United Kingdom

GB

6

Notes on using your camera

Shooting procedure

• This camera has 2 modes for monitoring

subjects: the LCD screen mode using the

LCD screen, and the viewfinder mode

using the viewfinder.

• The recorded image may be different

from the image you monitored before

recording.

Notes on the functions available with

the camera

• To check whether it is a 1080 60i-

compatible device or 1080 50i-

compatible device, check for the

following marks on the bottom of the

camera.

1080 60i-compatible device:60i

1080 50i-compatible device:50i

• You may feel uncomfortable symptoms

such as eyestrain, nausea, or a tired

feeling while watching 3D-images

recorded with the camera on 3D-

compatible monitors. When you watch

3D-images, we recommend that you take

a break at regular time intervals. Since

the need for or frequency of break times

varies among individuals, please set your

own standards. If you feel sick, stop

watching 3D-images, and consult a

doctor as needed. Also, refer to the

operating instructions of the connected

device or the software used with the

camera. A child’s vision is always

vulnerable (especially for children under

6 years of age). Before allowing them to

watch 3D-images, please consult with an

expert, such as a pediatric or ophthalmic

doctor. Be sure to make sure your

children follow the precautions above.

No compensation for contents of the

recording

The contents of the recording cannot be

compensated for if recording or playback is

not possible due to a malfunction of your

camera or a memory card, etc.

Back up recommendation

To avoid the potential risk of data loss,

always copy (back up) data to other

medium.

Notes on the LCD screen, electronic

viewfinder, lens, and image sensor

• The LCD screen and electronic

viewfinder are manufactured using

extremely high-precision technology so

over 99.99% of the pixels are operational

for effective use. However, there may be

some tiny black points and/or bright

points (white, red, blue or green in color)

that constantly appear on the LCD screen

and electronic viewfinder. These points

are normal in the manufacturing process

and do not affect the images in any way.

• Do not hold the camera by taking hold of

the LCD screen.

• Do not expose the camera to sunlight or

shoot sunward for a long time. The

internal mechanism may be damaged. If

sunlight is focused on a nearby object, it

may cause a fire.

• Images may trail across on the screen in a

cold location. This is not a malfunction.

When turning on the camera in a cold

location, the screen may become

temporarily dark. When the camera

warms up, the screen will function

normally.

Notes on long-time recording

• When you continue to shoot for a long

time, the temperature of the camera rises.

If the temperature reaches above a certain

level, the mark is indicated on the

screen and the camera is turned off

automatically. If the power is turned off,

leave the camera for 10 minutes or longer

to allow the temperature inside the

camera to decrease to a safe level.

• Under high ambient temperatures, the

temperature of the camera rises quickly.

• When the temperature of the camera

rises, the image quality may deteriorate.

It is recommended that you wait until the

Notes on using your camera

7

GB

temperature of the camera drops before

continuing to shoot.

• The surface of the camera may get warm.

This is not a malfunction.

Notes on importing AVCHD movies to

a computer

When importing AVCHD movies to a

computer, for Windows computers, use the

“PlayMemories Home” software on the

CD-ROM (supplied).

Notes when playing movies on other

devices

• This camera uses MPEG-4 AVC/H.264

High Profile for AVCHD format

recording. Movies recorded in AVCHD

format with this camera cannot be played

with the following devices.

– Other devices compatible with

AVCHD format that does not support

High Profile

– Devices incompatible with the

AVCHD format

This camera also uses MPEG-4 AVC/

H.264 Main Profile for MP4 format

recording. For this reason, movies

recorded in MP4 format with this camera

cannot be played on devices other than

those that support MPEG-4 AVC/H.264.

• Discs recorded with HD image quality

(high definition) can be played back only

on AVCHD format-compatible devices.

DVD-based players or recorders cannot

play back HD image quality discs, as

they are incompatible with the AVCHD

format. Also, DVD-based players or

recorders may fail to eject HD image

quality discs.

Warning on copyright

Television programs, films, videotapes, and

other materials may be copyrighted.

Unauthorized recording of such materials

may be contrary to the provisions of the

copyright laws.

The pictures used in this manual

The photographs used as examples of

pictures in this manual are reproduced

images, and are not actual images shot

using this camera.

On the data specifications described

in this manual

The data on performance and specifications

is defined under the following conditions,

except as described in this manual: at an

ordinary ambient temperature of 25ºC

(77°F), and using a battery pack that is

charged for about 1 hour after the

CHARGE lamp goes out.

Model name

This manual covers several models

supplied with different lenses.

The model name varies depending on the

supplied lens. The available model varies

depending on the countries/regions.

Model name Lens

SLT-A37 –

SLT-A37K DT18-55mm

SLT-A37M DT18-135mm

SLT-A37Y DT18-55mm and

DT55-200mm

GB

8

Preparing

the

camera

Checking the supplied items

First check the model name of your camera (page 7). The accessories

supplied differ depending on the model.

The number in parentheses indicates the number of pieces.

Common accessories

• Camera (1)

• BC-VW1 Battery charger (1)

• Power cord (mains lead) (1)* (not

supplied in the U.S.A. and

Canada)

* Multiple power cords may be supplied

with your camera. Use the appropriate

one that matches your country/region.

• Rechargeable battery pack NP-

FW50 (1)

• USB cable (1)

• Shoulder strap (1)

• Body cap (1) (Attached on the

camera)

• Eyecup (1) (Attached on the

camera)

•CD-ROM (1)

– Application Software for α

camera

– α Handbook

• Instruction Manual (1) (This

manual)

SLT-A37K

• DT18-55mm zoom lens (1)/Front

lens cap (1)/Packaging lid (1)

SLT-A37M

• DT18-135mm zoom lens (1)/

Front lens cap (1)/Rear lens cap

(1)/Lens hood (1)

SLT-A37Y

• DT18-55mm zoom lens (1)/Front

lens cap (1)/Packaging lid (1)

• DT55-200mm zoom lens (1)/

Front lens cap (1)/Rear lens cap

(1)/Lens hood (1)

Preparing the camera

9

GB

Identifying parts

See the pages in parentheses for details of operation.

A Shutter button (24)

B Power switch (22)

C Control dial

D Self-timer lamp

E Lens contacts*

F Mirror*

G Preview button

H Mount

I Built-in flash*

J Microphone**

K Mode dial (29)

L (Flash pop-up) button

M Mounting index (20)

N Lens release button

O Focus mode switch

* Do not directly touch these

parts.

** Do not cover this part

during movie recording.

Doing so may cause noise

or lower the volume.

Front side

Identifying parts

GB

10

A Eyecup

B Viewfinder*

• When you look into the

viewfinder, the viewfinder

mode is activated, and when

you take your face away from

the viewfinder, the screen mode

returns to the LCD screen

mode.

C Eyepiece sensors

D Diopter-adjustment dial

E LCD screen (38)

F Access lamp (18)

G For shooting: Fn (Function)

button (30)

For viewing: (Image

rotation) button

H Control button

v/V/b/B/DISP (Display)/WB

(White balance)/ (Drive)

/ISO

I Control button (Enter)/AF

button/Object Tracking button

(30)

J (In-Camera Guide) button

(32)

For viewing: (Delete) button

(28)

K (Playback) button (27)

* Do not directly touch this

part.

Rear side

Identifying parts

Preparing the camera

11

GB

A Auto-lock Accessory shoe

B MENU button (31)

C Microphone*

D FINDER/LCD button

E Speaker

F Image sensor position

mark

G ZOOM button

H For shooting: AEL (AE lock)

button

For viewing: (Zoom in)

button

I For shooting: (Exposure)

button/AV (Aperture value)

button

For viewing: (Zoom out)

button/ (Image index)

button

J MOVIE button (26)

* Do not cover this part

during movie recording.

Doing so may cause noise

or lower the volume.

Top side

Identifying parts

GB

12

A REMOTE terminal

• When connecting the RM-

L1AM Remote Commander

(sold separately) to the camera,

insert the plug of the Remote

Commander into the REMOTE

terminal, aligning the guide of

the plug with the guide of the

REMOTE terminal. Make sure

that the cord of the Remote

Commander faces forward.

B Hooks for shoulder strap

• Attach both ends of the strap

onto the camera.

C HDMI mini terminal

D (USB) terminal

E Microphone jack

• When an external microphone

is connected, the internal

microphone is turned off

automatically. When the

external microphone is a plug-

in-power type, the power of the

microphone is supplied by the

camera.

F Tripod receptacle

• Use a tripod with a screw length

of less than 5.5 mm (7/32 inch).

You will be unable to firmly

secure the camera to tripods

with a screw length of 5.5 mm

(7/32 inch) or longer, and

attempting to do so may

damage the camera.

G Memory card insertion slot (17)

H Battery/memory card cover

(17)

Sides/Bottom

Identifying parts

Preparing the camera

13

GB

I Connection plate cover

• For using the AC-PW20 AC

Adaptor (sold separately)

Be careful not to catch the cord

of the AC Adaptor in the cover

when you close the cover.

Identifying parts

GB

14

DT 18-55mm F3.5-5.6 SAM

(Supplied with the SLT-A37K/A37Y)

DT 55-200mm F4-5.6 SAM

(Supplied with the SLT-A37Y)

DT 18-135mm F3.5-5.6 SAM

(Supplied with the SLT-A37M)

A

Focusing ring

B Zoom ring

C Focal-length scale

D Focal-length index

E Lens contacts

F Focusing mode switch

G Mounting index

H Lens hood index

I Zoom lock switch

• The DT 18-55mm F3.5-5.6

SAM/DT 55-200mm F4-5.6

SAM/DT 18-135mm F3.5-5.6

SAM are designed for Sony A-

mount cameras (models equipped

with an APS-C sized image

sensor). You cannot use these

lenses on 35mm-format cameras.

• For the lenses other than DT 18-

55mm F3.5-5.6 SAM/DT 55-

200mm F4-5.6 SAM/DT 18-

135mm F3.5-5.6 SAM, refer to

the operating instructions

supplied with the lens.

Lens

Preparing the camera

15

GB

Charging the battery pack

When using the camera for the first time, be sure to charge the NP-FW50

“InfoLITHIUM” battery pack (supplied).

The “InfoLITHIUM” battery pack can be charged even when it has not

been fully depleted.

It can also be used when it has not been fully charged.

The battery pack is discharged little by little, even when you do not use it.

To avoid missing an opportunity to shoot, check the remaining battery level

before you shoot. If the battery level is low, charge it again.

1

Insert the battery pack onto

the battery charger.

Push the battery pack until it clicks.

Charging the battery pack

GB

16

Notes

• The charging time differs depending on the remaining capacity of the battery pack or

charging conditions.

• We recommend charging the battery pack in an ambient temperature of between

10°C to 30°C (50°F to 86°F). You may not be able to efficiently charge the battery

pack outside of this temperature range.

• Connect the battery charger to the nearest wall outlet (wall socket).

2

Connect the battery charger

to the wall outlet (wall

socket).

Light on: Charging

Light off: Charge completed

• When charging a fully depleted

battery pack at a temperature of 25°C

(77°F).

• The CHARGE lamp turns off when

charging is completed.

For the U.S.A and Canada

CHARGE lamp

For countries/regions other than the

U.S.A. and Canada

Charging time About 250 minutes

Plug

To a wall outlet

(wall socket)

CHARGE lamp

Preparing the camera

17

GB

Inserting the battery pack/memory

card (sold separately)

1

While sliding the cover open

lever, open the cover.

2

Firmly insert the battery pack

all the way while pressing

the lock lever with the tip of

the battery.

Lock lever

3

Insert a memory card.

• With the notched corner facing as

illustrated, insert the memory card

until it clicks into place.

Ensure the notched corner faces

correctly.

4

Close the cover.

Inserting the battery pack/memory card (sold separately)

GB

18

To remove the battery pack

To remove the memory card

Check that the access lamp is not lit, then open the cover, and push the

memory card once.

To check the remaining battery level

The supplied battery pack is a lithium-ion battery pack that has functions

for exchanging information related to operating conditions with your

camera. The remaining battery time in percent figures is displayed

according to the operating conditions of your camera.

The following memory cards are compatible with this camera. However, all

memory cards are not guaranteed to work with this camera.

• MultiMediaCard cannot be used.

Turn off the camera. Slide the lock lever

in the direction of the arrow 10 seconds

after turning off the camera, then remove

the battery pack. Be careful not to drop

the battery pack.

Lock lever

Battery level

“Battery

exhausted.”

High Low

You cannot shoot

any more pictures.

Available memory cards

Types of memory card

Still

images

Movies In this manual

Memory Stick PRO Duo (Mark2)

Memory Stick

PRO Duo

Memory Stick PRO-HG Duo

SD memory card

(Class 4 or faster)

SD card

SDHC memory card (Class 4 or faster)

SDXC memory card (Class 4 or faster)

Inserting the battery pack/memory card (sold separately)

Preparing the camera

19

GB

Note

• Images recorded on an SDXC memory card cannot be imported to or played on

computers or AV devices that are not compatible with exFAT. Make sure that the

device is compatible with exFAT before connecting it to the camera. If you connect

your camera to an incompatible device, you may be prompted to format the card.

Never format the card in response to this prompt, as doing so will erase all data on

the card. (exFAT is the file system used on SDXC memory cards.)

GB

20

Attaching a lens

Notes

• When attaching a lens, do not press the lens release button.

• Do not use force when attaching a lens.

• E-mount lenses are not compatible with this camera.

• When you use a lens for which a tripod socket is provided, attach the lens onto the

tripod using the tripod socket provided to help balance the weight of the lens.

• When carrying the camera with a lens attached, hold both the camera and the lens

firmly.

• Do not hold the part of the lens that is extended for the zoom or focus adjustment.

1

Remove the body cap from

the camera and the

packaging lid from the rear

of the lens.

• When changing the lens, quickly

change the lens away from dusty

locations so as to keep dust or debris

from getting inside the camera.

• When shooting, remove the front lens

cap from the front of the lens.

Front lens cap

Packaging lid

2

Mount the lens by aligning

the orange index marks

(mounting indexes) on the

lens and camera.

Orange index marks

3

Turn the lens clockwise until

it clicks into the locked

position.

• Be sure to put the lens on straight.

Body cap

La page charge ...

Sony SLT A37 Mode d'emploi

Ce manuel convient également à

Sony SLT A37 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents