Midas DL231 Guide de démarrage rapide

Taper
Guide de démarrage rapide
Quick Start Guide
MIDAS DL231
24 Input, 24 Output Active Microphone Splitter with
2 Independent MIDAS Microphone Preampli ers per Input
2 MIDAS DL231 Quick Start Guide 3
Terminals marked with this symbol carry
electrical current of su cient magnitude
to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. Allother
installation or modi cation should be performed only
by quali edpersonnel.
This symbol, wherever it appears,
alertsyou to the presence of uninsulated
dangerous voltage inside the
enclosure-voltage that may be su cient to constitute a
risk ofshock.
This symbol, wherever it appears,
alertsyou to important operating and
maintenance instructions in the
accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, donot
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
quali ed personnel.
Caution
To reduce the risk of  re or electric shock,
do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects  lled with liquids,
suchas vases, shall be placed on the apparatus.
Caution
These service instructions are for use
by quali ed service personnel only.
Toreduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by quali ed
servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampli ers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. Ifthe
provided plug does not  t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Use only attachments/accessories speci ed by
themanufacturer.
12. Use only with the
cart, stand, tripod, bracket,
or table speci ed by the
manufacturer, orsold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to quali ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
beendropped.
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.
17. Correct disposal of this
product: This symbol indicates that
this product must not be disposed
of with household waste,
according to the WEEE Directive
(2012/19/EU) and your national
law. This product should be taken
to a collection center licensed for the recycling of waste
electrical and electronic equipment (EEE). The
mishandling of this type of waste could have a possible
negative impact on the environment and human health
due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to
the e cient use of natural resources. For more
information about where you can take your waste
equipment for recycling, please contact your local city
o ce, or your household waste collection service.
18. Do not install in a con ned space, such as a book
case or similar unit.
19. Do not place naked  ame sources, such as lighted
candles, on the apparatus.
20. Please keep the environmental aspects of battery
disposal in mind. Batteries must be disposed-of at a
battery collection point.
21. Use this apparatus in tropical and/or
moderate climates.
MUSIC Group accepts no liability for any loss which
may be su ered by any person who relies either
wholly or in part upon any description, photograph,
or statement contained herein. Technical speci cations,
appearances and other information are subject to
change without notice. All trademarks are the property
of their respective owners. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA
and DDA are trademarks or registered trademarks
of MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2017 All rights reserved.
For the applicable warranty terms and conditions
and additional information regarding MUSIC Groups
Limited Warranty, please see complete details online at
music-group.com/warranty.
Las terminales marcadas con este símbolo
transportan corriente eléctrica de
magnitud su ciente como para constituir
un riesgo de descarga eléctrica. Utilice solo cables de
altavoz profesionales y de alta calidad con conectores
TS de 6,3 mm o de bayoneta pre jados. Cualquier otra
instalación o modi cación debe ser realizada únicamente
por un técnico cuali cado.
Este símbolo, siempre que aparece,
leadvierte de la presencia de voltaje
peligroso sin aislar dentro de la caja;
estevoltaje puede ser su ciente para constituir un riesgo
dedescarga.
Este símbolo, siempre que aparece,
leadvierte sobre instrucciones operativas
y de mantenimiento que aparecen en la
documentación adjunta. Por favor, lea el manual.
Atención
Para reducir el riesgo de descarga
eléctrica, no quite la tapa (o la parte
posterior). No hay piezas en el interior del equipo que
puedan ser reparadas por el usuario. Si es necesario,
póngase en contacto con personal cuali cado.
Atención
Para reducir el riesgo de incendio o
descarga eléctrica, no exponga este
aparato a la lluvia, humedad o alguna otra fuente que
pueda salpicar o derramar algún líquido sobre el aparato.
Nocoloque ningún tipo de recipiente para líquidos sobre
el aparato.
Atención
Las instrucciones de servicio deben
llevarlas a cabo exclusivamente personal
cuali cado. Para evitar el riesgo de una descarga eléctrica,
no realice reparaciones que no se encuentren descritas
en el manual de operaciones. Lasreparaciones deben ser
realizadas exclusivamente por personalcuali cado.
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua.
6. Limpie este aparato con un paño seco.
7. No bloquee las aberturas de ventilación. Instale el
equipo de acuerdo con las instrucciones del fabricante.
8. No instale este equipo cerca de fuentes de calor
tales como radiadores, acumuladores de calor, estufas u
otros aparatos (incluyendo ampli cadores) que puedan
producir calor.
9. No elimine o deshabilite nunca la conexión a tierra
del aparato o del cable de alimentación de corriente.
Unenchufe polarizado tiene dos polos, uno de los cuales
tiene un contacto más ancho que el otro. Una clavija con
puesta a tierra dispone de tres contactos: dos polos y la
puesta a tierra. El contacto ancho y el tercer contacto,
respectivamente, son los que garantizan una mayor
seguridad. Si el enchufe suministrado con el equipo no
concuerda con la toma de corriente, consulte con un
electricista para cambiar la toma de corriente obsoleta.
10. Coloque el cable de suministro de energía de manera
que no pueda ser pisado y que esté protegido de objetos
a lados. Asegúrese de que el cable de suministro de
energía esté protegido, especialmente en la zona de la
clavija y en el punto donde sale del aparato.
11. Use únicamente los dispositivos o accesorios
especi cados por el fabricante.
12. Use únicamente la
carretilla, plataforma,
trípode, soporte o mesa
especi cados por el
fabricante o suministrados
junto con el equipo.
Altransportar el equipo,
tenga cuidado para evitar
daños y caídas al tropezar con algún obstáculo.
13. Desenchufe el equipo durante tormentas o si no va a
utilizarlo durante un periodo largo.
14. Confíe las reparaciones únicamente a servicios
técnicos cuali cados. La unidad requiere mantenimiento
siempre que haya sufrido algún daño, si el cable de
suministro de energía o el enchufe presentaran daños,
sehubiera derramado un líquido o hubieran caído objetos
dentro del equipo, si el aparato hubiera estado expuesto
a la humedad o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún golpe o caída.
15. Al conectar la unidad a la toma de corriente eléctrica
asegúrese de que la conexión disponga de una unión
atierra.
16. Si el enchufe o conector de red sirve como único
medio de desconexión, éste debe ser accesiblefácilmente.
17. Cómo debe deshacerse de
este aparato: Este símbolo indica
que este aparato no debe ser
tratado como basura orgánica,
según lo indicado en la Directiva
WEEE (2012/19/EU) y a las
normativas aplicables en su país.
En lugar de ello deberá llevarlo al punto limpio más
cercano para el reciclaje de sus elementos eléctricos/
electrónicos (EEE). Al hacer esto estará ayudando a
prevenir las posibles consecuencias negativas para el
medio ambiente y la salud que podrían ser provocadas por
una gestión inadecuada de este tipo de aparatos. Además,
el reciclaje de materiales ayudará a conservar los recursos
naturales. Para más información acerca del reciclaje de
este aparato, póngase en contacto con el Ayuntamiento
de su ciudad o con el punto limpio local.
18. No instale esta unidad en un espacio muy reducido,
tal como encastrada en una librería o similar.
19. No coloque objetos con llama, como una vela
encendida, sobre este aparato.
20. Tenga presentes todas las advertencias relativas
al reciclaje y correcta eliminación de las pilas. Las pilas
deben ser siempre eliminadas en un punto limpio y nunca
con el resto de la basura orgánica.
21. Use este aparato en rangos de temperatura
moderados y/o tropicales.
MUSIC Group no admite ningún tipo de responsabilidad
por cualquier daño o pérdida que pudiera sufrir
cualquier persona por con ar total o parcialmente en la
descripciones, fotografías o a rmaciones contenidas en
este documento. Las especi caciones técnicas, imágenes
y otras informaciones contenidas en este documento
están sujetas a modi caciones sin previo aviso. Todas las
marcas comerciales que aparecen aquí son propiedad
de sus respectivos dueños. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA
y DDA son marcas comerciales o marcas registradas
de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2017 Reservados todos los derechos.
Si quiere conocer los detalles y condiciones aplicables
de la garantía así como información adicional sobre la
Garantía limitada de MUSIC Group, consulte online toda la
información en la web music-group.com/warranty.
Important Safety
Instructions
LEGAL DISCLAIMER
Instrucciones de
seguridad
NEGACIÓN LEGAL
GARANTÍA LIMITADA
LIMITED WARRANTY
4 MIDAS DL231 Quick Start Guide 5
Les points repérés par ce symbole portent
une tension électrique su sante pour
constituer un risque d’électrocution.
Utilisez uniquement des câbles d’enceintes professionnels
de haute qualité avec  ches Jack mono 6,35 mm ou  ches
à verrouillages déjà installées. Touteautre installation ou
modi cation doit être e ectuée uniquement par un
personnel quali é.
Ce symbole avertit de la présence d’une
tension dangereuse et non isolée à
l’intérieur de l’appareil - elle peut
provoquer des chocs électriques.
Attention
Ce symbol signale les consignes
d’utilisation et d’entre ! Tien importantes
dans la documentation fournie. Lisez les consignes de
sécurité du manuel d’utilisation de l’appareil.
Attention
Pour éviter tout risque de choc électrique,
ne pas ouvrir le capot de l’appareil ni
démonter le panneau arrière. Lintérieur de l’appareil
ne possède aucun élément réparable par l’utilisateur.
Laissertoute réparation à un professionnel quali é.
Attention
Pour réduire les risques de feu et de choc
électrique, n’exposez pas cet appareil à la
pluie, à la moisissure, aux gouttes ou aux éclaboussures.
Ne posez pas de récipient contenant un liquide sur
l’appareil (un vase par exemple).
Attention
Ces consignes de sécurité et d’entretien
sont destinées à un personnel quali é.
Pouréviter tout risque de choc électrique, n’e ectuez
aucune réparation sur l’appareil qui ne soit décrite par le
manuel d’utilisation. Les éventuelles réparations doivent
être e ectuées uniquement par un technicien spécialisé.
1. Lisez ces consignes.
2. Conservez ces consignes.
3. Respectez tous les avertissements.
4. Respectez toutes les consignes d’utilisation.
5. N’utilisez jamais l’appareil à proximité d’un liquide.
6. Nettoyez l’appareil avec un chi on sec.
7. Veillez à ne pas empêcher la bonne ventilation de
l’appareil via ses ouïes de ventilation. Respectezles
consignes du fabricant concernant l’installation
del’appareil.
8. Ne placez pas l’appareil à proximité d’une source
de chaleur telle qu’un chau age, une cuisinière ou tout
appareil dégageant de la chaleur (y compris un ampli
depuissance).
9. Ne supprimez jamais la sécurité des prises bipolaires
ou des prises terre. Les prises bipolaires possèdent deux
contacts de largeur di érente. Leplus large est le contact
de sécurité. Les prises terre possèdent deux contacts plus
une mise à la terre servant de sécurité. Si la prise du bloc
d’alimentation ou du cordon d’ali-mentation fourni ne
correspond pas à celles de votre installation électrique,
faites appel à un électricien pour e ectuer le changement
de prise.
10. Installez le cordon d’alimentation de telle façon
que personne ne puisse marcher dessus et quil soit
protégé d’arêtes coupantes. Assurez-vous que le cordon
d’alimentation est suffisamment protégé, notamment au
niveau de sa prise électrique et de l’endroit où il est relié à
l’appareil; cela est également valable pour une éventuelle
rallonge électrique.
11. Utilisez exclusivement des accessoires et des
appareils supplémentaires recommandés par lefabricant.
12. Utilisez
exclusivement des
chariots, des diables,
desprésentoirs, despieds
et des surfaces de
travail recommandés
par le fabricant ou
livrés avec le produit.
Déplacezprécautionneusement tout chariot ou diable
chargé pour éviter d’éventuelles blessures en cas dechute.
13. Débranchez l’appareil de la tension secteur en cas
d’orage ou si l’appareil reste inutilisé pendant une longue
période de temps.
14. Les travaux d’entretien de l’appareil doivent
être e ectués uniquement par du personnel qualifié.
Aucunentretien nest nécessaire sauf si l’appareil est
endommagé de quelque façon que ce soit (dommagessur
le cordon d’alimentation ou la prise par exemple), siun
liquide ou un objet a pénétré à l’intérieur du châssis,
si l’appareil a été exposé à la pluie ou à l’humidité, s’il ne
fonctionne pas correctement ou à la suite d’une chute.
15. Lappareil doit être connecté à une prise secteur
dotée d’une protection par mise à la terre.
16. La prise électrique ou la prise IEC de tout appareil
dénué de bouton marche/arrêt doit rester accessible
enpermanence.
17. Mise au rebut appropriée de
ce produit: Ce symbole indique
qu’en accord avec la directive DEEE
(2012/19/EU) et les lois en vigueur
dans votre pays, ce produit ne doit
pas être jeté avec les déchets
ménagers. Ce produit doit être
déposé dans un point de collecte agréé pour le recyclage
des déchets d’équipements électriques et électroniques
(EEE). Une mauvaise manipulation de ce type de déchets
pourrait avoir un impact négatif sur l’environnement et la
santé à cause des substances potentiellement
dangereuses généralement associées à ces équipements.
En même temps, votre coopération dans la mise au rebut
de ce produit contribuera à l’utilisation e cace des
ressources naturelles. Pour plus d’informations sur
l’endroit où vous pouvez déposer vos déchets
d’équipements pour le recyclage, veuillez contacter votre
mairie ou votre centre local de collecte des déchets.
18. N’installez pas l’appareil dans un espace con né tel
qu’une bibliothèque ou meuble similaire.
19. Ne placez jamais d’objets en ammés, tels que des
bougies allumées, sur l’appareil.
20. Gardez à l’esprit l’impact environnemental lorsque
vous mettez des piles au rebus. Les piles usées doivent
être déposées dans un point de collecte adapté.
21. Utilisez l’appareil dans un climat tropical
et/ou modéré.
MUSIC Group ne peut être tenu pour responsable pour
toute perte pouvant être subie par toute personne
se  ant en partie ou en totalité à toute description,
photographie ou a rmation contenue dans ce
document. Les caractéristiques, l’apparence et d’autres
informations peuvent faire l’objet de modi cations
sans noti cation. Toutes les marques appartiennent à
leurs propriétaires respectifs. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA
et DDA sont des marques ou marques déposées
de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2017 Tous droits réservés.
Pour connaître les termes et conditions de garantie
applicables, ainsi que les informations supplémentaires
et détaillées sur la Garantie Limitée de MUSIC Group,
consultez le site Internet music-group.com/warranty.
Vorsicht
Die mit dem Symbol markierten
Anschlüsse führen so viel Spannung,
dassdie Gefahr eines Stromschlags besteht.
Verwenden Sie nur hochwertige, professionelle
Lautsprecherkabel mit vorinstallierten 6,35 mm
MONO-Klinkensteckern oder Lautsprecherstecker
mit Drehverriegelung. Alle anderen Installationen
oder Modi kationen sollten nur von quali ziertem
Fachpersonal ausgeführt werden.
Achtung
Um eine Gefährdung durch Stromschlag
auszuschließen, darf die Geräteabdeckung
bzw. Geräterückwand nicht abgenommen werden.
ImInnern des Geräts be nden sich keine vom Benutzer
reparierbaren Teile. Reparaturarbeiten dürfen nur von
quali ziertem Personal ausgeführt werden.
Achtung
Um eine Gefährdung durch Feuer bzw.
Stromschlag auszuschließen, darf dieses
Gerät weder Regen oder Feuchtigkeit ausgesetzt werden
noch sollten Spritzwasser oder tropfende Flüssigkeiten
in das Gerät gelangen können. Stellen Sie keine mit
Flüssigkeit gefüllten Gegenstände, wie z. B. Vasen,
aufdasGerät.
Achtung
Die Service-Hinweise sind nur durch
quali ziertes Personal zu befolgen.
Umeine Gefährdung durch Stromschlag zu vermeiden,
führen Sie bitte keinerlei Reparaturen an dem Gerät
durch, die nicht in der Bedienungsanleitung beschrieben
sind. Reparaturen sind nur von quali ziertem
Fachpersonaldurchzuführen.
1. Lesen Sie diese Hinweise.
2. Bewahren Sie diese Hinweise auf.
3. Beachten Sie alle Warnhinweise.
4. Befolgen Sie alle Bedienungshinweise.
5. Betreiben Sie das Gerät nicht in der Nähe vonWasser.
6. Reinigen Sie das Gerät mit einem trockenen Tuch.
7. Blockieren Sie nicht die Belüftungsschlitze. Beachten
Sie beim Einbau des Gerätes die Herstellerhinweise.
8. Stellen Sie das Gerät nicht in der Nähe von
Wärmequellen auf. Solche Wärmequellen sind z. B.
Heizkörper, Herde oder andere Wärme erzeugende Geräte
(auch Verstärker).
9. Entfernen Sie in keinem Fall die
Sicherheitsvorrichtung von Zweipol- oder geerdeten
Steckern. Ein Zweipolstecker hat zwei unterschiedlich
breite Steckkontakte. Ein geerdeter Stecker hat zwei
Steckkontakte und einen dritten Erdungskontakt.
Derbreitere Steckkontakt oder der zusätzliche
Erdungskontakt dient Ihrer Sicherheit. Falls das
mitgelieferte Steckerformat nicht zu Ihrer Steckdose
passt, wenden Sie sich bitte an einen Elektriker, damit die
Steckdose entsprechend ausgetauscht wird.
10. Verlegen Sie das Netzkabel so, dass es vor
Tritten und scharfen Kanten geschützt ist und nicht
beschädigt werden kann. Achten Sie bitte insbesondere
im Bereich der Stecker, Verlängerungskabel und an
der Stelle, an der das Netzkabel das Gerät verlässt,
aufausreichendenSchutz.
11. Das Gerät muss jederzeit mit intaktem Schutzleiter
an das Stromnetz angeschlossen sein.
12. Sollte der Hauptnetzstecker oder eine
Gerätesteckdose die Funktionseinheit zum Abschalten
sein, muss diese immer zugänglich sein.
13. Verwenden Sie nur Zusatzgeräte/Zubehörteile,
dielaut Hersteller geeignet sind.
14. Verwenden
Sie nur Wagen,
Standvorrichtungen,
Stative, Halter oder Tische,
die vom Hersteller benannt
oder im Lieferumfang
des Geräts enthalten
sind. Falls Sie einen
Wagen benutzen, seien Sie vorsichtig beim Bewegen
der Wagen- Gerätkombination, umVerletzungen durch
Stolpern zuvermeiden.
15. Ziehen Sie den Netzstecker bei Gewitter oder wenn
Sie das Gerät längere Zeit nicht benutzen.
16. Lassen Sie alle Wartungsarbeiten nur von
quali ziertem Service-Personal ausführen. EineWartung
ist notwendig, wenn das Gerät in irgendeiner Weise
beschädigt wurde (z. B. Beschädigung des Netzkabels oder
Steckers), Gegenstände oder Flüssigkeit in das Geräteinnere
gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt
wurde, das Gerät nicht ordnungsgemäß funktioniert oder
auf den Boden gefallen ist.
17. Korrekte Entsorgung dieses
Produkts: Dieses Symbol weist
darauf hin, das Produkt
entsprechend der WEEE Direktive
(2012/19/EU) und der jeweiligen
nationalen Gesetze nicht
zusammen mit Ihren
Haushaltsabfällen zu entsorgen. DiesesProdukt sollte bei
einer autorisierten Sammelstelle für Recycling elektrischer
und elektronischer Geräte (EEE) abgegeben werden.
Wegen bedenklicher Substanzen, diegenerell mit
elektrischen und elektronischen Geräten in Verbindung
stehen, könnte eine unsachgemäße Behandlung dieser
Abfallart eine negative Auswirkung auf Umwelt und
Gesundheit haben. Gleichzeitig gewährleistet Ihr Beitrag
zur richtigen Entsorgung dieses Produkts die e ektive
Nutzung natürlicher Ressourcen. Fürweitere
Informationen zur Entsorgung Ihrer Geräte bei einer
Recycling-Stelle nehmen Sie bitte Kontakt zum
zuständigen städtischen Büro, Entsorgungsamt oder zu
Ihrem Haushaltsabfallentsorgerauf.
18. Installieren Sie das Gerät nicht in einer beengten
Umgebung, zum Beispiel Bücherregal oder ähnliches.
19. Stellen Sie keine Gegenstände mit o enen
Flammen, etwa brennende Kerzen, auf das Gerät.
20. Beachten Sie bei der Entsorgung von Batterien
den Umweltschutz-Aspekt. Batterien müssen bei einer
Batterie-Sammelstelle entsorgt werden.
21. Verwenden Sie das Gerät in tropischen und/oder
gemäßigten Klimazonen.
MUSIC Group übernimmt keine Haftung für Verluste,
die Personen entstanden sind, die sich ganz oder
teilweise auf hier enthaltene Beschreibungen,
Fotos oder Aussagen verlassen haben. Technische Daten,
Erscheinungsbild und andere Informationen können
ohne vorherige Ankündigung geändert werden.
Alle Warenzeichen sind Eigentum der jeweiligen
Inhaber. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,
TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA und DDA sind Warenzeichen oder
eingetragene Warenzeichen der MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2017 Alle Rechte vorbehalten.
Die geltenden Garantiebedingungen und zusätzliche
Informationen bezüglich der von MUSIC Group
gewährten beschränkten Garantie  nden Sie online unter
music-group.com/warranty.
Consignes de sécurité
DÉNI LÉGAL
GARANTIE LIMITÉE
Wichtige
Sicherheitshinweise
HAFTUNGSAUSSCHLUSS
BESCHRÄNKTE GARANTIE
6 MIDAS DL231 Quick Start Guide 7
Aviso!
Terminais marcados com o símbolo
carregam corrente elétrica de magnitude
su ciente para constituir um risco de choque elétrico.
Use apenas cabos de alto-falantes de alta qualidade
com plugues TS de ¼" ou plugues com trava de torção
pré-instalados. Todas as outras instalações e modi cações
devem ser efetuadas por pessoasquali cadas.
Este símbolo, onde quer que o encontre,
alerta-o para a leitura das instruções de
manuseamento que acompanham o
equipamento. Por favor leia o manual de instruções.
Atenção
De forma a diminuir o risco de choque
eléctrico, não remover a cobertura
(ouasecção de trás). Não existem peças substituíveis por
parte do utilizador no seu interior. Para esse efeito recorrer
a um técnico quali cado.
Atenção
Para reduzir o risco de incêndios ou
choques eléctricos o aparelho não deve ser
exposto à chuva nem à humidade. Além disso, não deve
ser sujeito a salpicos, nem devem ser colocados em cima
do aparelho objectos contendo líquidos, tais como jarras.
Atenção
Estas instruções de operação devem ser
utilizadas, em exclusivo, por técnicos de
assistência quali cados. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação, salvo se possuir as
quali -cações necessárias. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação. Só o deverá fazer se
possuir as quali cações necessárias.
1. Leia estas instruções.
2. Guarde estas instruções.
3. Preste atenção a todos os avisos.
4. Siga todas as instruções.
5. Não utilize este dispositivo perto de água.
6. Limpe apenas com um pano seco.
7. Não obstrua as entradas de ventilação. Instale de
acordo com as instruções do fabricante.
8. Não instale perto de quaisquer fontes de calor
tais como radiadores, bocas de ar quente, fogões de
sala ou outros aparelhos (incluindo ampli cadores)
que produzam calor.
9. Não anule o objectivo de segurança das  chas
polarizadas ou do tipo de ligação à terra. Uma  cha
polarizada dispõe de duas palhetas sendo uma mais larga
do que a outra. Uma  cha do tipo ligação à terra dispõe
de duas palhetas e um terceiro dente de ligação à terra.
A palheta larga ou o terceiro dente são fornecidos para
sua segurança. Se a  cha fornecida não encaixar na sua
tomada, consulte um electricista para a substituição da
tomada obsoleta.
10. Proteja o cabo de alimentação de pisadelas ou
apertos, especialmente nas  chas, extensões, e no local
de saída da unidade. Certi que-se de que o cabo eléctrico
está protegido. Veri que particularmente nas  chas, nos
receptáculos e no ponto em que o cabo sai doaparelho.
11. O aparelho tem de estar sempre conectado à rede
eléctrica com o condutor de protecção intacto.
12. Se utilizar uma  cha de rede principal ou uma
tomada de aparelhos para desligar a unidade de
funcionamento, esta deve estar sempre acessível.
13. Utilize apenas ligações/acessórios especi cados
pelofabricante.
14. Utilize apenas com
o carrinho, estrutura,
tripé, suporte, ou mesa
especi cados pelo
fabricante ou vendidos
com o dispositivo.
Quandoutilizar um
carrinho, tenha cuidado ao
mover o conjunto carrinho/dispositivo para evitar danos
provocados pela terpidação.
15. Desligue este dispositivo durante as trovoadas
ou quando não for utilizado durante longos períodos
detempo.
16. Qualquer tipo de reparação deve ser sempre
efectuado por pessoal quali cado. É necessária uma
reparação sempre que a unidade tiver sido de alguma
forma dani cada, como por exemplo: no caso do cabo
de alimentação ou  cha se encontrarem dani cados;
naeventualidade de líquido ter sido derramado ou
objectos terem caído para dentro do dispositivo; no caso
da unidade ter estado exposta à chuva ou à humidade;
seesta não funcionar normalmente, ou se tiver caído.
17. Correcta eliminação deste
produto: este símbolo indica que
o produto não deve ser eliminado
juntamente com os resíduos
domésticos, segundo a Directiva
REEE (2012/19/EU) e a legislação
nacional. Este produto deverá
ser levado para um centro de recolha licenciado para a
reciclagem de resíduos de equipamentos eléctricos e
electrónicos (EEE). O tratamento incorrecto deste tipo
de resíduos pode ter um eventual impacto negativo
no ambiente e na saúde humana devido a substâncias
potencialmente perigosas que estão geralmente
associadas aos EEE. Ao mesmo tempo, a sua colaboração
para a eliminação correcta deste produto irá contribuir
para a utilização e ciente dos recursos naturais. Paramais
informação acerca dos locais onde poderá deixar o seu
equipamento usado para reciclagem, é favor contactar
os serviços municipais locais, a entidade de gestão de
resíduos ou os serviços de recolha de resíduosdomésticos.
18. Não instale em lugares con nados, tais como
estantes ou unidades similares.
19. Não coloque fontes de chama, tais como velas
acesas, sobre o aparelho.
20. Favor, obedecer os aspectos ambientais de descarte
de bateria. Baterias devem ser descartadas em um ponto
de coletas de baterias.
21. Use este aparelho em climas tropicais
e/ou moderados.
O MUSIC Group não se responsabiliza por perda alguma
que possa ser sofrida por qualquer pessoa que dependa,
seja de maneira completa ou parcial, de qualquer
descrição, fotogra a, ou declaração aqui contidas.
Dados técnicos, aparências e outras informações
estão sujeitas a modi cações sem aviso prévio.
Todas as marcas são propriedade de seus respectivos
donos. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,
TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA e DDA são marcas ou marcas
registradas do MUSIC Group IP Ltd. © MUSIC Group
IP Ltd. 2017 Todos direitos reservados.
Para obter os termos de garantia aplicáveis e condições e
informações adicionais a respeito da garantia limitada do
MUSIC Group, favor veri car detalhes na íntegra através
do website music-group.com/warranty.
Instruções de Segurança
Importantes
LEGAL RENUNCIANTE
GARANTIA LIMITADA
¼" TS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
MUSIC Group
MIDAS KLARK TEKNIK LAB GRUPPEN
LAKE TANNOY TURBOSOUND TC ELECTRONIC
TC HELICON BEHRINGER BUGERA DDA
MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2017
MUSIC Group
music-group.com/warranty
8 MIDAS DL231 Quick Start Guide 9
ࣝధ൦ಗ঄ᄋጽቬ᝻ܭЧధृ
ܹᄋႄุߜڛᝐႄԁᬘǎ̪ᬎ
Ώၺࣝధ ¼ '' TSੌ੶ᩛऱତ݁
ᄋᰵַ᠐˅ˋੵܧ٩ጴǎ੟ధᄋ߸ᜊੌួ
஠ڪᮍႁՍಬᄋ˅ˋ̢ցᤊᛢǎ
൦ಗ঄ଣᧉ১ַ̘аߜڛఴ
ፑᎇᄋԁᬘႄԎధᝐႄԁᬘǎ
൦ಗ঄ଣᧉ১ಋ᫟੟ᬅᄋ᧙᜷
ᄋΏၺԤ፦οឮ௛ǎឱ᫟឵ధ
У੥гǎ
࠶ॸ
˟ᥙГᝐႄԁᬘឱӉ੫
ᮈᄧੌᑁ᭨૖ౝǎ᝻ܭа෦
ధԼΚၺਜ਼፦οΏၺᄋᦋ͉ǎឱ࠳፦ο̄
ᮋ̕ႁՍಬᄋ˅ˋ̢ցᤊᛢǎ
࠶ॸ
˟ᥙГ༣ੌᝐႄԁᬘឱӉ
࠳൦᝻ܭᎷ̇ᭂ๹ੌ˘ǎ
᝻ܭ˸ˁԼԫ๰͵໠ᄪ๰͵ᄋࠕ
٩˸ˁԼᎷ̇Цʾݡᔊၬ኏ǎ
࠶ॸ
፦οឮ௛̪௨ፍՍಬᄋ˅ˋ
ο̢ցΏǎ˟Гԁ
ᬘᬕ́Ώၺឮ௛˻ଣ҃ᄋ̀ܲឱӉᤊ
͋ͶЦ߳፦οǎ੟ధ፦οڪᮍႁՍಬᄋ˅
ˋ̢ցᤊᛢǎ
1. ឱ᫟឵ᤉ̐ឮ௛ǎ
2. ឱݱؔεߜᤉ̐ឮ௛ǎ
3. ឱญਔ੟ధᄋ᝞ᇩǎ
4. ឱᥗ߷੟ధᄋឮ௛ǎ
5. ឱӉڛ᭦ᤄබᄋڢஶΏၺశַ̘ǎ
6. ឱၺࣱ࣌ຎพశַ̘ǎ
7. ឱӉ܅܌ᤱ᮴Աǎ߸ᜊశַ̘௒ឱᥗ
ཱིԉࠓᄋឮ௛ǎ
8. ឱӉ࠳శַ̘߸ᜊڛམ຺ᬅᤄ
ݡ఍ජྠ༰ߖੌЦ̘߳ၸམ᧛ᄋ᝻ܭ
Ӌ઻ҫ஋٩ǎ
9. ឱӉሩᬕ౞মତ݁ੌ଍ڢତ݁ᄋ߸М
ᜊᎷǎ଍ڢତ݁௨ႁˑ˕ତ܌଍གྷԤʸ˕
଍ڢ݁౟ੈǎᔫᬥ᠏ଣΚᄋତ݁ˁᤡՍ১
ᄋତऑឱ੾ႄࢻట૲ʸ˕Սᤡᄋତऑǎ
10. ݱؔεઑႄ຺ጴΏЦˁᜃ᡼ᢇੌ҉
ᆢࡀЦญਔႄ຺ତ݁Ǎܴၺ᤮ତऑԤ᝻ܭ
ᤍ଍ܬǎ
11. ឱԷΏၺԉࠓ૊ࠁᄋᬅ࡜᝻ܭ֘
ᦢ͉ǎ
12. ឱԷΏၺԉࠓ
૊ࠁᄋੌᬥ᠏ᩚ
׭ᄋ੥ଏᢽ౷ߖ
ʽᝉ౷஄౷֘ಹ
ߖǎᔫΏၺ੥ଏᢽ
౐ୄᤃ᝻ܭឱญ
ਔ߸М஋Ꮇ᝻ܭ
̀ᥙГ੥ଏᢽ֘᝻
ܭϛωᏬԫ͟ǎ
13. ᥆᫆ႄᭈᲟੌ᫃ఱˁΏၺశ᝻ܭ௒
ឱફѤႄ຺ତ݁ǎ
14. ੟ధ፦οڪᮍႁՍಬᄋ፦ο̢ցᤊ
ᛢǎ᝻ܭԫ૰௒ᭋᤊᛢ፦οΔݡႄ຺ጴੌ
ႄ຺ତ݁ԫ૰๰͵ุЛੌफྮᗁЛ᝻ܭ
а᝻ܭᥔᭂ๹ੌԫ໾᝻ܭˁᑠ൥ࣣᤃͼ
ੌᜃ୒گǎ
15. శ᝻ܭᤍ଍ႄ຺௒ʸࠁ᜷ధ଍ڢ
εઑǎ
16. ᔫႄ຺ତ݁ੌ٩Ч
ᏺՍ٩ၺͼளႄᜊᎷ
अैε᝾߳̈́ܬ̇ᬥ௒Լ
ஶΨ୳ͼ࿅ঘǎ
17. శַ̘̪ᤡၺ̇๓
ફ2000ዜ̀ʿڢӞశ̘
ַ̪ᤡၺ̇᭥མࣝජό౏
͉ʿǎ
ࠬ̇͋Ͷڃڛ൦ឮ௛˻ଣ҃ᄋМᦋ
ੌᦋ͌ଢᤙǍڐྠੌܧ௛Ꮼᤶੈᄋ૰
݀
MUSIC Groupˁ᠈͋Ͷ᠋͋ǎ઀స
ԡஞ֘ܲ᜻ᔫధటஉিˁԴᛢᤱ
ᅽǎ੟ధᄋ׹ಗڪ˟ЦՋᒮ੟ధᏩᄋ
᠊̘ǎ
MIDAS, KLARK TEKNIK, LAB GRUPPEN,
LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC,
TC HELICON, BEHRINGER, BUGERA
֘ DDA ௨
MUSIC Group IP Ltd.ОՄᄋ׹ಗੌญг׹ಗǎ
© MUSIC Group IP Ltd. 2017ྡీ੟ధǎ
ధУᮄˮᬸڅεοᄋᤡၺ౏൝ԤЦ߳ᄲУ
θ্ឱᄇᬇmusic-group.com/warrantyᎫቤಋ
ᄻߺ஠ᄋឡጻθ্ǎ
其他的重要信息
10 11MIDAS DL231 Quick Start Guide
1. Introduction
Welcome!
Thank you for purchasing the DL231 Audio System I/O unit.
The MIDAS DL231 Audio System I/O unit is housed in a rugged 19" 2U rack-mount
chassis with cosmetic trim, suitable for use and storage in a road ight case.
All user interface controls and feedback are located on the fr
ont panel.
User interface controls are laid out for ease of operation with consideration for
the amount of user feedback required. All switches are high quality momentary
type with integral blue LED illumination and printed switch caps.
All primary connectors are on the rear of the unit. All input
s and outputs
are on balanced XLR connectors. All analogue audio inputs and outputs
are tolerant of 48 V connection and short circuit protected. The DL231 uses
Neutrik XLR connections.
The DL231 I/O unit is a mixed technology product combining analogue and
digit
al circuitry. These circuit types are combined on the input and output cards
using multi-layer horizontal PCBs. Extreme care has been taken when planning
and executing the PCB layout to maintain good grounding and analogue/
digital separation.
The DL231 unit uses proven technology from the DL
251 I/O unit from the current
MIDAS range. The analogue input and output cards are identical, and the CPU
card is a modi ed version of the one used in the DL251.
The user interface software is based on the same menu system currently used
on existing MIDA
S I/O units and has provision for all of the functions these units
can perform.
Equipped with 48 channels of MIDAS premium mic-pre ampli ers with 2.5 dB
ultra precise gain steps, the DL231 unit is an ideal partner for all MIDAS digital
consoles (e
specially the XL8, PRO3/6/9 and PRO X consoles), signi cantly
increasing mixable mic inputs.
Integration Within The MIDAS Product Range
Styled to match existing MIDAS console livery, MIDAS high performance I/O has
never been easier or more cost e ective.
Features
2 award-winning MIDAS microphone preampli ers per channel with
switchable +48 V phantom power
2 dual redundant AES50 network ports with independent phase-locked
loop synchronisation
24 electronically balanced output channels can be sourced from microphone
preampli ers or AES50 ports
Remote operation up to 10
0 m via CAT5/5e cable
24 bit audio operation with 96 kHz sample rate
All settings programmable from front panel controls or console
PSU status indicator LEDs and con guration LCD display on front panel
• Features Neutrik Ether
CON* AES50 network ports
Rugged 5U rackmount chassis for durability in portable applications
Dual redundant auto-ranging universal switch-mode power supplies
3-Year Warranty Program**
Designed and engineered in England
*All third-party trademarks are the property of their respective owners. Their use neither constitutes a claim of the trademark nor affiliation
of the trademark owners with MUSIC Group. Product names are mentioned solely as a reference for compatibility, effects and/or components.
**Warranty details can be found at music-group.com.
About this manual
This is the operation manual for the DL231 I/O unit. This manual is intended to
help get your unit installed and in operation as quickly as possible by giving
you unpacking, installation, connection, setting up and operating instructions.
To help familiarise you with the DL
231, there is a description of the front and rear
panels, along with easy-to-follow user instructions.
The DL231 - front panel
The DL231 - rear panel
2. Getting Started
This section shows you how to unpack, install, connect up, switch on and
con gure the DL231 I/O unit.
This equipment is supplied by a mains voltage that can
cause electric shock injury.
Before installing, setting up or operating this equipment, make sure
that you have read and fully understand all of this section and the
“Important safety instructions” at the front of this manual. Refer to
additional safety information on the top cover of the unit.
Unpacking
Carefully unpack your DL231 I/O unit. Then, inspect the DL231 I/O unit carefully
for any signs of damage that may have occurred during transit and notify the
courier immediately if you discover any.
Check the contents of your DL231 I/O unit equipment package. If there are any
parts missing, incor
rect or faulty, please contact your local distributor or MIDAS
at the address at the front of this manual.
Please retain the original packing in case you should need to return the
equipment to the manufacturer or supplier, or transport or ship the unit later
.
Installation
Before installing and operating this equipment, make sure it is correctly
connected to the protective earth conductor of the mains voltage supply socket
outlet through each mains lead.
Ideally a cool area is preferred, away from power distribution equipment or other
potential sources of interference.
Do not ins
tall the equipment in places of poor ventilation.
Do not install this equipment in a location subjected to excessive heat, dust or
mechanical vibration. Allow for adequate ventilation around the equipment,
making sure that its fans and vents are not obstructed. Whenever possible,
keep the eq
uipment out of direct sunlight.
Mount in rack only.
Power
The internal power supplies are of the switch mode type that automatically
senses the incoming mains voltage and will work where the nominal voltage is in
the range 100 VAC to 240 VAC.
The correct leads for connection in the area to which the unit was ship
ped are
supplied with the unit. The equipment should only be plugged into the mains
outlets using the supplied leads.
Make sure the plug tted on the supplied mains cable is securely tted to the
mains IEC connector on the unit. When tt
ing or removing a plug, always hold
the plug itself and never use the cable, as this may damage it. Never insert or
remove an electric plug with wet hands.
Handling the equipment
When lifting or moving the equipment, always take its size and weight
into consideration.
Completely isolate the equipment electrically and disconnect all cables from the
equipment before moving it.
Do not insert your ngers or hands in any gaps or openings on the equipment,
for exa
mple, vents.
Electric  elds
In accordance with Part 15 of the FCC Rules & Regulations, “… changes or
modi cations not expressly approved by the party responsible for compliance
could void the users authority to operate the equipment.
Should this product be used in an electromagnetic eld th
at is amplitude modulated
by an audio frequency signal (20 Hz to 20 kHz), the signal to noise ratio may be
degraded. Degradation of up to 60 dB at a frequency corresponding to the modulation
signal may be experienced under extreme conditions (3 V/m, 90% modulation
).
12 13MIDAS DL231 Quick Start Guide
Connecting up
The DL231 I/O unit uses the following leads and connectors:
Primary Analogue Inputs:
Mic/Line Inputs - Balanced XLR connectors - 10K load
Primary Analogue Outputs:
Main Outputs - Balanced XLR connectors - 50R Source
AES50 Connections:
Neutrik EtherCON with status indication
Ethernet Control Connection:
Neutrik EtherCON with status indication
Diagnostics Connection:
9 W FemaleD’ type connector
Power Connections:
IEC mains inlet10
0-240 V AC~50-60 Hz
For further information about the connectors used in conjunction with the
DL231 I/O unit, see Section 5. Connectors.
3. Front Panel
(5)(1) (2) (3) (4) (6) (7)
4. Rear Panel
(19)
(20)
(15
)
(16)
(18)
(8) (9) (10) (11) (12) (13) (14)
(17)
(1) The psu panel monitors the two voltage supplies. There are ve yellow
LEDs per voltage supply, and each LED represents a voltage rail. An LED will
illuminate when its respective voltage rail is active.
(2) The Ethernet control panel has a single green LED, wh
ich has three
states of illumination: ashing = active; on = connected; and o =
not connected.
(3) The AES50 audio panel shows the health status of the communications of
the AES50 connections. If the green ok LED is illuminated, communication
is good
. However, if the red error LED is illuminated, there is a problem on
that connection.
(4) LCD Display - 2 x 16 character blue backlit liquid crystal display.
(5) Con guration Control -Menu’,Select’,Up’ andDown’ buttons for
con guring menu items.
(6) There are fou
r air intakes for fan cooling. Do not obstruct.
(7) There are four cut-outs for rack mounting xings.
(8) Unit serial number label.
(9) Ventilation grills, which provide an air outtake for fan cooling of the inside
of the unit.
(10) Male XLR chassis connectors, which provide outputs for line eq
uipment.
Each socket has a red LED that illuminates when mute is on for that output.
(11) Female XLR chassis connectors, which provide inputs for mic/line
equipment. Each socket has a red LED that illuminates when +48 V
phantom power is on for that input.
(1
2) The diagnostics connector is a 9-way D-type connector for connecting a
laptop/PC by service personnel for diagnostics purposes. This is not an
operator function and is only to be used by service personnel.
(13) The boot mode switch selects between normal operation and a
service personnel-only con guration boot mode. It has an adjacent
red LED, which illuminates to show when the unit is in se
rvice only
con guration mode.
(14) The MUTE button mutes all the outputs simultaneously when held down
for longer than one second. It has an integral LED that illuminates when
mute is active.
(15) There are three MIDI (m
usical instrument digital interface) sockets
MIDI in, MIDI out and MIDI thrufor connection of a MIDI device,
such as a synthesiser. The MIDI in socket receives MIDI data, and the
MIDI thru socket gives out the same MIDI data that is received by the
MIDI in socket. The MIDI out socket gives out MIDI dat
a generated by the
attached MIDAS Digital Console.
14 15MIDAS DL231 Quick Start Guide
(16) Four AES50 audio EtherCON sockets provide connection to the console
and pass audio and control data in both directions. Each socket has a pair
of red and green LEDs, which indicate the following:
Green pulsating and red extinguished = valid audio and valid control
data; active link.
Green constantly illuminated and red extinguished = valid audio and
valid control data; standby link.
Green extinguished and red illuminated = no audio; link has failed.
(17) The Ethernet control EtherCON socket on the rear panel allows Ethernet
control via Cat 5e cable up to 100 m long. This socket has a green LED that
indicates the following:
Green LED solid = connected but not active
Green LED ashing = active
Green LED extinguished = fault or no connection
Mains power
Each mains inlet should be sourced from its own separate
wall-mounted mains outlet socket. Otherwise, both mains
sources must be suitably distributed so as to meet local
safety regulations.
The mains is supplied to the DL231 via dual redundant mains inlets.
(18) Dual redundant power supplies.
(19) Mains on/o isolator switch.
(20) Mains IEC socket.
5. Connectors
To ensure the correct and reliable operation of the equipment, only high quality
balanced, screened, twisted pair audio cable should be used. XLR connector
shells should be of metal construction so that they provide a screen when
connected to the console/snake and, where appropri
ate, they should have Pin 1
connected to the cable screen.
(1) Line output audio connector. Female XLR plug and male XLR chassis
connector with the following pinouts: 1 = ground; 2 = hot; and 3 = cold.
(2) Mic/line input audio connector. Male XLR plug and female XLR ch
assis
connector with the following pinouts: 1 = ground; 2 = hot; and 3 = cold.
(3) Ethernet socket. RJ45 plug and EtherCON socket.
(4) Diagnostics. 9-way, D-type plug and socket.
132
232
6. Operation
Programming Mode
This chapter describes the programming mode of the DL231 I/O Unit.
Menu navigation
The four programming buttons in the control panel have the following functions.
Navigation buttons Usage
Moves up or down a menu level, or exits programming
mode, depending on the current menu level.
Selects the current option.
Scrolls through the current level of menus/options.
Scrolls through the current level of menus/options in
the opposite direction to the up arrow button.
The menu owcharts on pages 17 through 21 give an overview of all the menus
and their options, and shows you how to navigate your way around them. In the
diagram the menus are shown on the left, and each subsequent lower level is to
the right.
To enter/exit programming mode
To enter programming mode
, press the MENU button and hold down for
approximately two seconds; the default display will change to the top-level
Select Menu:display (seeMenuson this page).
To exit programming mode from any menu display screen, press MENU
repeatedly until yo
u reach the default screen. The unit will exit programming
mode automatically after about 20 seconds of inactivity if none of the
programming buttons are pressed within that time.
To select a menu
In programming mode, scroll to the menu you want by using the up/down arrow
buttons, then press SELECT.
Menus
The eight menus in programming mode are as follows:
1. MicSplit IDfor setting up the unit’s network ID (seeMicSplit ID
Menubelow).
2. AES50 Syncfor selecting the method for synchronizing the AES50
(seeAES50 Sync Menubelow).
3. Output Sourcefor setting up the output signal routing fr
om the units
analogue or AES50 digital inputs.
4. 48 V Controlfor controlling the source of 48 V phantom power.
5. Sample Rateallows you to set the units sample rate (48k or 96k
sample rates).
6. AES50 Status – lets you view/clear the AES50 values.
7. S/
W Versionfor viewing the units software version number.
8. Reset All – lets you reset all settings to default.
In programming mode the four programming buttons in the control panel are
used to navigate and select options from a number of menus, which let you set
up the unit and view inf
ormation.
16 17MIDAS DL231 Quick Start Guide
Menu Flowchart
Menu 1: MicSplit ID
Menu 2: AES50 Sync
Press and
hold down
for about
two seconds
Menu 1
Default screen
Asterisk
indicates
parameter is
available for
selection.
ID range is from
1 to 8
Default screen
Channel A
and
Channel B
have matching
submenus
Menu 2
Asterisk
indicates
parameter
is available
for selection
Menu 1
Press and
hold down
for about
two seconds
Menu 3: Output Source
Menu 4: 48 V Control
Press and
hold down
for about
two seconds
Default screen
Asterisk
indicates
parameter
is available
for selection
Navigate through
2 menus
Menu 3
Press and
hold down
for about
two seconds
Navigate through
3 menus
Default screen
Menu 4
Asterisk
indicates
parameter
is available
for selection
18 19MIDAS DL231 Quick Start Guide
Menu 5: Sample Rate
Menu 6: AES50 Status
Press and
hold down
for about
two seconds
Navigate through
4 menus
Default screen
Menu 5
Asterisk
indicates
parameter
is available
for selection
Press and
hold down
for about
two seconds
Navigate through
6 menus
AES50 A status range
is from 1 to 6
Menu 6
Default screen
AES50 B status range
is from 1 to 6
Each AES50 B
status 1 to 6
has its own
submenu.
Each AES50 A
status 1 to 6
has its own
submenu.
Menu Chart (Overview)
Press and
hold down
for about
two seconds
Default screen
20 21MIDAS DL231 Quick Start Guide
7. Technical Speci cations
This section contains the technical speci cations for the DL231 I/O unit.
Due to our policy of continual improvement, MIDAS reserves the right to alter the
function or speci cation at any time without notice.
General Statistics
General Speci cations
Audio Performance Speci cations
Frequency response
Input Output Gain 20 Hz 20 kHz
DL231 I/O Box DL231 I/O Box 0 dB +0 dB to -1 dB +0 dB to -1 dB
DL231 I/O Box DL231 I/O Box 45 dB +0 dB to -1 dB +0 dB to -1 dB
Gain error at 1 kHz
Input Output Gain Max. Min.
DL231 I/O Box DL231 I/O Box 0 dB +1 dB -1 dB
DL231 I/O Box DL231 I/O Box 45 dB +1 dB -1 dB
Input CMRR Typical
Input Output Gain 100 Hz 1 kHz
DL231 I/O Box DL231 I/O Box 0 dB 70 dB 70 dB
DL231 I/O Box DL231 I/O Box 45 dB 90 dB 90 dB
Distortion at 0 dBu
Input Output Gain 1 kHz 10 kHz
DL231 I/O Box DL231 I/O Box 0 dB 0.01% 0.01%
DL231 I/O Box DL231 I/O Box 45 dB 0.03% 0.03%
Distortion at +20 dBu
Input Output Gain 1 kHz 10 kHz
DL231 I/O Box DL231 I/O Box 0 dB 0.01% 0.01%
DL231 I/O Box DL231 I/O Box 45 dB 0.03% 0.03%
XLR Connections
DL231
1 x 5U rack I/O box houses: 24 x (XLR) mic/line inputs (48 mic/line amps)
24 x (XLR) line outputs
Resilience
Dual redundant network cables and dual redundant PSUs
Sampling frequency 48 kHz/96 kHz
Dynamic range @ 1 kHz22 Hz to 22 kHz (at unity gain): > 107 dB
Maximum gain 45 dB
Crosstalk @ 1 kHZ-90 dB physically adjacent input channels
Crosstalk @ 10k HZ-90 dB physically adjacent input channels
Dimensions 5U x 410 mm deep
Net wei
ght 15 kg
Shipping weight 18 kg
Power requirements 100 V to 240 V AC ±10%, 50 to 60 Hz
Power consumption <150 W
Operating temperature range +5° C to +40° C
Storage temperature range -20° C to +60° C
Signal path noise 22 Hz to 22 kHz unweighted (inputs 150 Ω terminated)
Input Output Gain Output noise EIN
DL231 I/O Box DL231 I/O Box 0 dB -86 dBu -86 dBu
DL231 I/O Box DL231 I/O Box 45 dB -81 dBu -126 dBu
Dynamic range 22 Hz to 22 kHz unweighted
Input Output Gain Maximum level Dynamic range
DL231 I/O Box DL231 I/O Box 0 dB +21 dBu 107 dB
DL231 I/O Box DL231 I/O Box 45 dB +21 dBu 102 dB
System Inputs and Outputs
Input and Output Characteristics
Analogue input characteristics
Input Load Z Gain Max. level Connector
DL231 I/O Box 10 kΩ -2.5 dB to +45 dB +24 dBu XLR
Analogue output characteristics
Output Source Z Gain Max. level Connector
DL231 I/O Box 50 Ω 0 dB +21 dBu XLR
48 kHz digital I/O characteristics
Type AES50
Channels24
Data length 24-bit
I/O Bi-directional
Description notes Conforms to AES50-2011
Connector EtherCON XLR
96 kHz digital I/O characteristics
Type AES50
Channels24
Data length 24-bit
I/O Bi-directional
Description notes Conforms to AES50-2011
Connector EtherCON XLR
I/O Box inputs
Connector 3-pin XLR balanced
A/D converter 24-bit, 96 kHz and 128 times oversampling
I/O Box outputs
Connector 3-pin XLR balanced
D/A convertor 24-bit, 96 kHz and 128 times oversampling
MIDI
MIDI connector In, out and through on 5-pin DIN (for use with MIDAS consoles only)
48 kHz I/O digital system inputs and outputs
System connector A (X)1 x AES50 (24 channels of bi-directional digital audio) on EtherCON XLR
Redundant connector A (Y) 1 x AES50 (24 channels of bi-directional digital audio) on EtherCON XLR providing redundant backup
System connector B (X)1 x AES50 (24 channels of bi-directional digital audio
) on EtherCON XLR
Redundant connector B (Y) 1 x AES50 (24 channels of bi-directional digital audio) on EtherCON XLR providing redundant backup
96 kHz I/O digital system inputs and outputs
System connector A (X)1 x AES50 (24 channels of bi-directional digital audio) on EtherCON XLR
Redundant connector A (Y) 1 x AES50 (24 channels of bi-directional digital audio) on EtherCON XLR providing redundant backup
System connector B (X)1 x AES50 (24 channels of bi-directional digital audio
) on EtherCON XLR
Redundant connector B (Y) 1 x AES50 (24 channels of bi-directional digital audio) on EtherCON XLR providing redundant backup
22 MIDAS DL231 Quick Start Guide 23
Other important information
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by
visiting midasconsoles. com. Registering your purchase
using our simple online form helps us to process your repair
claims more quickly and e ciently. Also, read the terms and
condi
tions of our warranty, ifapplicable.
2. Malfunction. Should your MUSICGroup
Authorised Reseller not be located in your vicinity, you
may contact the MUSIC Group Authorised Ful ller for your
country listed underSupportat midasconsoles. com.
Shouldyour country not be listed, please check if your
problem can be dealt with by ourOnlineSupportwhich
may also be found underSupportat midasconsoles. com.
Alternatively, please submit an online warranty claim at
midasconsoles. com BEFORE returning theproduct.
3. Power Connections. Before plugging the unit
into a power socket, please make sure you are using the
correct mains voltage for your particular model. Faultyfuses
must be replaced with fuses of the same typeand rating
without exception.
1. Registro online. Le recomendamos que registre
su nuevo aparato MUSIC Group justo después de su compra
accediendo a la página web midasconsoles. com. Elregistro
de su compra a través de nuestro sencillo sistema online nos
ayudará a resolver cualquier incidencia que se presente a la
mayor brevedad posible. Además,aproveche para leer los
términos y condiciones de nuestra garantía, si es aplicable
en sucaso.
2. Averías. En el caso de que no exista un distribuidor
MUSIC Group en las inmediaciones, puede ponerse en
contacto con el distribuidor MUSIC Group de su país,
queencontrará dentro del apartadoSupportde nuestra
página web
midasconsoles. com
. En caso de que su país no
aparezca en ese listado, acceda a la secciónOnline Support
(quetambiénencontrará dentro del apartadoSupportde
nuestra páginaweb) y compruebe si su problema aparece
descrito y solucionado allí. De forma alternativa, envíenos a
través de la página web una solicitud online de soporte en
periodo de garantía ANTES de devolvernos el aparato.
3. Conexiones de corriente. Antes de enchufar
este aparato a una salida de corriente, asegúrese de que
dicha salida sea del voltaje adecuado para su modelo
concreto. En caso de que deba sustituir un fusible quemado,
deberá hacerlo por otro de idénticas especi caciones,
sinexcepción.
1. Enregistrez-vous en ligne. Prenez le temps
d’enregistrer votre produit MUSIC Group aussi vite que
possible sur le site Internet midasconsoles. com. Le fait
d’enregistrer le produit en ligne nous permet de gérer
les réparations plus rapidement et plus e cacement.
Prenezégalement le temps de lire les ter
mes et conditions
de notre garantie.
2. Dysfonctionnement. Si vous n’avez pas de
revendeur MUSIC Group près de chez vous, contactez le
distributeur MUSIC Group de votre pays: consultez la liste
des distributeurs de votre pays dans la pageSupportde
notre site Internet midasconsoles. com. Si votre pays n’est
pas dans la liste, essayez de résoudre votre problème avec
notreaideen ligneque vous trouverez également dans la
sectionSupportdu site midasconsoles. com. Vous pouvez
également nous faire parvenir directement votre demande
de réparation sous garantie par Internet sur le site
midasconsoles. com AVANT de nous renvoyer le produit.
3. Raccordement au secteur. Avant de relier
cet équipement au secteur, assurez-vous que la tension
secteur de votre région soit compatible avec l’appareil.
Veillez à remplacer les fusibles uniquement par des modèles
exactement de même taille et de même valeur électrique
sans aucune exception.
1. Online registrieren. Bitte registrieren Sie
Ihr neues MUSIC Group-Gerät direkt nach dem Kauf auf
der Website midasconsoles. com. Wenn Sie Ihren Kauf
mit unserem einfachen online Formular registrieren,
können wir Ihre Reparaturansprüche schneller und
e zienter bearbeiten. Lesen Sie bitte auch unsere
Garantiebedingungen, fallszutre end.
2. Funktionsfehler. Sollte sich kein MUSICGroup
Händler in Ihrer Nähe be nden, können Sie den
MUSICGroup Vertrieb Ihres Landes kontaktieren, derauf
midasconsoles. com unterSupportaufgeführt ist.
Sollte Ihr Land nicht aufgelistet sein, prüfen Sie bitte,
ob Ihr Problem von unseremOnline Supportgelöst
werden kann, den Sie ebenfalls auf midasconsoles. com
unterSupport nden. Alternativ reichen Sie bitte Ihren
Garantieanspruch online auf midasconsoles. com ein,
BEVOR Sie das Produktzurücksenden.
3. Stromanschluss. Bevor Sie das Gerät an
eine Netzsteckdose anschließen, prüfen Sie bitte, obSie
die korrekte Netzspannung r Ihr spezielles Modell
verwenden. Fehlerhafte Sicherungen müssen ausnahmslos
durch Sicherungen des gleichen Typs und Nennwerts
ersetztwerden.
1. Registre-se online. Por favor, registre seu novo
equipamento MUSIC Group logo após a compra visitando
o site midasconsoles. com Registrar sua compra usando
nosso simples formulário online nos ajuda a processar
seus pedidos de reparos com maior rapidez e e ciência.
Além disso, leia nossos termos e condições de garantia,
caso seja necessário.
2. Funcionamento Defeituoso.
Casoseufornecedor MUSIC Group não esteja localizado
nas proximidades, você pode contatar um distribuidor
MUSIC Group para o seu país listado abaixo deSuporte
emmidasconsoles. com. Se seu país não estiver na
lista, favorchecar se seu problema pode ser resolvido
com o nossoSuporte Onlineque também pode ser
achado abaixo deSuporteem midasconsoles. com.
Alternativamente, favor enviar uma solicitação de garantia
online em midasconsoles. com ANTES da devolução
do produto.
3. Ligações. Antes de ligar a unidade à tomada,
assegure-se de que está a utilizar a voltagem correcta para
o modelo em questão. Os fusíveis com defeito terão de
ser substituídos, sem qualquer excepção, por fusíveis do
mesmo tipo e corrente nominal.
1.
230 V 120 V 2
2. MUSIC Group
midasconsoles. com
Support
MUSICGroup
midasconsoles. com
Support OnlineSupport
midasconsoles. com
3.
Important information
Aspectos importantes
Informations importantes
Weitere wichtige
Informationen
Outras Informações
Importantes
1. 在线 请购买 MUSIC Group 产品后立
即在
midasconsoles. com 网站注。 网页上有简
单的在线注册表。 这有助于我们更快更有
效率地处理您维修等事宜。 请阅读保修的相
关条款及条件
2. 法正 若您的 MUSIC Group 产品
无法正常工作, 我们会为您尽快修复。 请联
系您购买产品的销售商。 若你所在地区没有
MUSIC Group 销售商, 请联系 midasconsoles. com
网站的 “WHERETOBUY” 一栏下的所列出的子
公司经销商。
3. 电源接。本设备连接电源前, 请确
保使用的电压正确。 保险丝需要更换时,
必须使用型号定额的险丝
其他的重要信息
Quick Start Guide 2524 MIDAS DL231
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible Party Name: MUSIC Group Research
UK Limited
Address: Klark Industrial Park,
Walter Nash Road,
Kidderminster. Worcestershire.
DY11 7HJ. England.
Phone Number: +44 1562 741515
DL231
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable prot
ection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is lik
ely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Important information:
Changes or modi cations to the equipment not expressly approved by MUSIC Group
can void the users authority to use the equipment.
DL231
midasconsoles.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Midas DL231 Guide de démarrage rapide

Taper
Guide de démarrage rapide