Honeywell RTH7600 Touchscreen Programmable Thermostat Manuel utilisateur

Marque: Honeywell

Modèle: RTH7600 Touchscreen Programmable Thermostat

Catégorie: Thermostats

Taper: Manuel utilisateur

Operating

Manual

RTH7600

Touchscreen Programmable Thermostat

69-2207EF-05

firealarmresources.com

Read and save these instructions.

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

® U.S. Registered Trademark. Patents pending.

US Patent No. 6,595,430; 7,114,554; 7,274,972; 7,225,054 and other patents pending

CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not

operate cooling system when outdoor temperature is below 50°F (10°C).

This manual covers the RTH7600 model.

(Pull thermostat from wallplate and turn over to find model number)

This thermostat contains a Lithium battery which may contain Perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

firealarmresources.com

RTH7600

1 69-2207EF—05

This thermostat is ready to go!

Your new thermostat is pre-programmed

and ready to go.

See page 3 to check settings.

Table of contents

About your new thermostat

Thermostat features .................................... 2

Programming at a glance ............................3

Quick reference to controls ......................... 4

Quick reference to status display ................ 5

Programming & Operation

Clock setting................................................ 6

Fan setting ..................................................7

System setting ............................................ 8

Using program schedules ...........................9

Program schedule overrides .....................11

Auto Changeover ......................................13

Furnace filter reminder .............................. 14

Special features ........................................15

Appendices

Battery replacement .................................. 16

In case of difficulty .................................... 17

Limited warranty ........................................19

firealarmresources.com

Operating Manual

69-2207EF—05 2

About your new thermostatAbout your new thermostat

Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermo-

stat. It has been designed to give you many years of reliable service and climate control.

Features

• Largetouchscreendisplaywithbacklightiseasytoread—eveninthedark.

• Dailyprogramschedulesmaximizecomfortandeconomy.

• One-touchtempcontroloverridesprogramscheduleatanytime.

• Precisecomfortcontrolkeepstemperaturewithin1°Fofthelevelyouset.

• Change/checkreminderletsyouknowwhentoreplacefurnacefilter.

firealarmresources.com

RTH7600

3 69-2207EF—05

This thermostat is ready to go!

Your new thermostat is pre-programmed and ready to go. All you have to do is set the

time and day. Then check the settings below and change if needed:

1. Set clock ................................................................................................See page 6

2. Select fan setting: Preset to Auto .......................................To change, see page 7

3. Select system setting: Preset to Heat ................................To change, see page 8

4. Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you wake at

6 am, leave at 8 am, return at 6 pm and go to bed

at 10 pm) .......................................................................To change, see pages 9–11

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and

manually adjust the temperature (see pages 12–13).

firealarmresources.com

Operating Manual

69-2207EF—05 4

Quick reference to controls

M27525

Mon

System & FanScheduleClock & Mode

System

Cool Fan Auto

Set To

Heat On

Recovery

6:01

Arrow keys

Press to adjust temperature (see pages 11–13), or to make selections from screen menus.

Clock & More

Press to set clock (see

page 6) or furnace

filter reminder.

Schedule

Press to set program schedule (see pages 10–11).

System & Fan

Press to select fan

operation (see page

7) or system (see

page 8).

firealarmresources.com

RTH7600

5 69-2207EF—05

Quick reference to status display

Mon

System & FanSchedule Clock & Mode

M27526

System

CoolFan Auto

Set To

Heat On

Recovery

6:01

Current day of week

Smart Response®

Technology in effect

(see page 17)

Current inside temperature Current time

Temperature

setting

System setting

(see page 8) Fan setting

(see page 7)

Other display messages:

• Cool On: Cooling system is activated

• Heat On: Heating system is activated

• Aux Heat On:Auxiliaryheatingsystemis

activated (heat pump systems only)

firealarmresources.com

Operating Manual

69-2207EF—05 6

M27528

Go BackDone

MON

6:01

M27527

System & FanSchedule Clock & Mode

Clock setting

To set the current time display, press CLOCK,

then press s or t to adjust the time. Press

and hold s or t to advance the time more

quickly.

Press DONEtosave&exit(orpressGO BACK

toexitwithoutchangingthetime).

Note: The real-time clock should never

require adjustment since it automatically

updates for daylight savings time, and stores

all date/time information.

Note: To change the current week

day display, see System Setup in your

Installation Guide.

Press CLOCK

Adjust time, then press DONE

firealarmresources.com

RTH7600

7 69-2207EF—05

M27527

System & FanSchedule Clock & Mode

Fan setting

Press SYSTEM & FAN, then FAN to select fan

operation:

• On: Fan is always on.

• Auto: Fan runs only when the heating or

cooling system is on.

Press SYSTEM & FAN

Press FAN to select mode, then press DONE

M27529

System Fan Done

System

HeatFan Auto

firealarmresources.com

Operating Manual

69-2207EF—05 8

M27527

System & FanSchedule Clock & Mode

System setting

Follow steps at left to select system:

• Heat: Thermostat controls only the heating

system.

• Cool: Thermostat controls only the cooling

system.

• Auto: Thermostat automatically selects heating

or cooling depending on the indoor temperature.

• Off: All systems are off.

• Em Heat(onlyforheatpumpswithauxiliary

heat): Thermostat controls Emergency and

AuxiliaryHeat.Compressorislockedout.

Note: The Auto and Em Heat system settings may not

Press SYSTEM & FAN

Press SYSTEM to select mode,

then press DONE

appear, depending on how your thermostat

was installed.

M27529

System Fan Done

System

HeatFan Auto

firealarmresources.com

RTH7600

9 69-2207EF—05

Save money by setting program schedules

It’seasytoprogramyoursystemformaximumenergysavings.Youcanprogramfourtime

periods each day, with different settings for weekdays and weekends.

Set to the time you awaken and the temperature you want

during the morning, until you leave for the day.

Set to the time you leave home and the temperature you

want while you are away (usually an energy-saving level).

Set to the time you return home and the temperature you

want during the evening, until bedtime.

Set to the time you go to bed and the temperature you want

overnight (usually an energy-saving level).

WAKE

6:00 am

70 °

LEAVE

8:00 am

62 °

RETURN

6:00 pm

70 °

SLEEP

10:00 pm

62 °

firealarmresources.com

Operating Manual

69-2207EF—05 10

About your new thermostat

Energy saving settings for maximum cost savings

This thermostat is pre-set with energy saving program settings. We recommend these

settings,sincetheycanreduceyourheating/coolingexpenses.(Seenextpagetoadjust

times and temperatures of each time period.)

Wake

(6:00 am)

Leave

(8:00 am)

Return

(6:00 pm)

Sleep

(10:00 pm)

Cool (Mon-Fri)Heat (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)

70 °78 °70 °78 °

62 °85 °62 ° 85 °

70 °78 °70 ° 78 °

62 °82 °62 °82 °

firealarmresources.com

RTH7600

11 69-2207EF—05

About your new thermostat

Go BackNext Step Done

Period

Wake

MON

TUE

WED

THU

FRI

M27531

Set To

Heat

6:00

M27530

Go BackEdit View

M27527

System & FanSchedule Clock & Mode

To adjust program schedules

1. Press SCHEDULE, then EDIT to see weekdays.

2. Press SELECT DAY. You can select multiple days

to program with the same settings.

3. Press NEXT STEP twice, then press s or t to set

Wake time for selected day(s).

4. Press NEXT STEP, then s or t to set Heat

temperature for this time period.

5. Press NEXT STEP, then s or t to set Cool

temperature for this time period.

6. Repeat steps 3-5 to program other time periods

(LEAVE, RETURN, SLEEP), then press DONE.

7. Repeat steps 1-6 to program Saturday/Sunday.

(Press s or t until the desired day is flashing,

then press SELECT DAY.)

8. Press DONEtosave&exit.

Select day(s) Select time Select temp

Press SCHEDULE

Press EDIT

firealarmresources.com

Operating Manual

69-2207EF—05 12

About your new thermostat

Mon

System & FanUse

Schedule Clock & Mode

M27532

System

HeatFan Auto

Temporary

Set To

Heat On

6:08

Program schedule override (temporary)

Press s or t to immediately adjust the

temperature. This will temporarily override the

temperature setting for the current time period.

The new temperature will be maintained until

thenexttimeperiod.

Whenthetimerexpires,theprogramschedule

will resume and set the temperature to the level

you’ve programmed for the current time period.

To cancel the temporary setting at any time,

press USE SCHEDULE.

Press USE SCHEDULE to

resume program schedule

Adjust temperature

firealarmresources.com

RTH7600

13 69-2207EF—05

About your new thermostat

Mon

Hold Cancel

M27533

Temporary

Set To

System

HeatFan Auto

6:08

Permanent Hold

Program schedule override (permanent)

Press s or t to adjust temperature, then press

HOLD. This will turn off the program schedule.

Whatever temperature you set will be

maintained 24 hours a day, until you manually

change it, or press USE SCHEDULE to cancel

“Hold” and resume the program schedule.

Press HOLD to turn off program

schedule and maintain set

temperature

Adjust temperature

firealarmresources.com

Operating Manual

69-2207EF—05 14

Use this feature in climates where both air conditioning and heating are used on the

same day. When the system mode is in Auto, the thermostat automatically selects heating

or cooling depending on the indoor temperature.

While in the Auto mode, if a schedule override takes place (temporarily or permanently)

the thermostat will automatically adjust the cooling and heating settings to maintain a

3-degree separation between the cool and heat settings.

Forexample,iftheheattemperatureisraisedtowhereitgetswithin3-dgreesofthecool

setting,thedisplaywillshowanuparrownextto“cool”toshowthethermostatisraising

the cool setting up to maintain a 3-dgreee separation.

The display will also show both “Auto” and either “Heat” or “Cool” for which temperature

setting you are currently adjusting. Press the system button to select between the heat

and cool to view/adjust either mode.

Auto Changeover

firealarmresources.com

RTH7600

15 69-2207EF—05

Tue

System

Hold Cancel

M27534

System Auto

Heat

Fan Auto

Temporary

Set To

Heat

Cool

1:09

Auto Changeover

Ifthecooltemperatureisloweredtowhereitgetsclosetotheheatsetting,anarrownext

to heat will show the thermostat is lowering the heat setting down to maintain a 3-degree

separation.

CAUTION: To avoid possible compressor damage, do not use Auto Changeover if the

outside temperature drops below 50°F (10°C).

The triangle indicates the cool temperature is

increasing to maintain 3 degrees between heat and

cool settings.

firealarmresources.com

Operating Manual

69-2207EF—05 16

About your new thermostat

ResetNext Done

M27536

Days

ResetSchedule Clock & Mode

M27535

System Fan Auto

Set To

Heat On

Change Filter

6:01

Heat

If activated during installation, the furnace filter

reminder alerts you when it is time to replace

your filter.

Press RESET after changing the filter, to restart

the timer.

Toresetthereminderintervalbeforeitexpires:

1. Press MORE, then NEXT.

2. Press RESET.

3. Press DONEtosaveandexit.

Press MORE to reset reminder interval

Press RESET after changing filter

Furnace filter reminder

firealarmresources.com

RTH7600

17 69-2207EF—05

About your new thermostatSpecial features

Smart Response® Technology: This feature allows the thermostat to “learn” how long the furnace

and air conditioner take to reach programmed temperature settings, so the temperature is reached at

thetimeyouset.Forexample:SettheWaketimeto6am,andthetemperatureto70°.Theheatwill

come on before 6 am, so the temperature is 70° by the time you wake at 6. The message “Recovery”

is displayed when the system is activated before a scheduled time period.

Compressor Protection: This feature forces the compressor to wait a few minutes before restarting,

topreventequipmentdamage.Duringthewaittime,themessage“Wait”isdisplayedonscreen.

Auto Changeover: This feature is used in climates where both air conditioning and heating are

used on the same day. When the system is set to Auto, the thermostat automatically selects heating

or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees

apart. The thermostat will automatically adjust settings to maintain this 3-degree separation.

CAUTION: To avoid possible compressor damage, do not use Auto Changeover if the

outside temperature drops below 50°F (10°C).

firealarmresources.com

Operating Manual

69-2207EF—05 18

About your new thermostat

M28419

Battery replacement/Customer assistance

Batteries are optional (to provide backup power) if

your thermostat was wired to run on AC power when

installed.

Install fresh batteries immediately when the LO BATT

warning begins flashing. The warning flashes about 30

days before batteries are depleted.

Even if the warning does not appear, you should replace

batteries once a year, or before leaving home for more

than a month.

For assistance with this product, please visit

http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at

1-800-468-1502.

Grasp thermostat and pull to

remove from wallplate

Insert 2 fresh AA alkaline batteries

M28420

firealarmresources.com

La page charge ...

Honeywell RTH7600 Touchscreen Programmable Thermostat Manuel utilisateur

Marque: Honeywell

Modèle: RTH7600 Touchscreen Programmable Thermostat

Catégorie: Thermostats

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Honeywell RTH7600 Touchscreen Programmable Thermostat User manual