Coway juicepresso CJP-03 Manuel utilisateur

Marque: Coway

Modèle: juicepresso CJP-03

Catégorie: Fabricants de jus

Taper: Manuel utilisateur

CJP-03

User’s Manual / Manuel d’utilisation / Manual del usuario

Enjoy delicious cold pressed juice with

Squeeze nature, taste

Make fresh juice in seconds!

With newly developed, patented technology, extracts the most nutrient rich juice possible

protecting the bold, rich avors nature intended.

For your safety, please read the User’s Manual

prior to using your .

Contents

page

Safety Precautions

page

Helpful Tips for Your

page

How to Disassemble

and Clean

page

Cleaning Tips

page

Troubleshooting

page

Product Specifications

page

Product Components

page

Preparations before Use

page

Assembly Instructions

page

How to Use Your

Safety Precautions

For your safety, please take a few moments to read the following instructions, safety tips, suggestions and warnings to get the most out of your .

Your is heavy. Please use caution

when lifting or moving.

a. Not doing so may cause physical injury.

a. Not doing so may cause physical injury or

unit damage may occur.

Please keep your out of

children’s reach.

If electrical cord becomes wet, dry

completely before use.

a. Not doing so may be a re hazard and

cause electrocution.

Keep the electrical cord away from heated

surfaces. Do not twist, wrap or forcefully

pull the cord.

a. Doing so may cause re or possible

electrocution.

Only put foods you intend to juice into

the unit’s opening.

a. Damage to the unit, re or electrocution

could occur if anything else is inserted.

If the squeezing screw stops turning,

stop and put into reverse for 2

to 3 seconds.

a. Not doing so can cause unit to overheat

and lead to motor failure.

Do not operate if the electrical

cord is loose or damaged.

If electrical cord becomes wet, dry

completely before use.

Please do not use if the electrical cord

or plug is loose or damaged.

a. Not doing so may be a re hazard or

cause electrocution.

b. Please contact Customer Service.

Please do not disassemble or

insert anything into juice and pulp outlets

during operation.

a. Not doing so may damage your .

Children or individuals with certain disabilities

should not use this appliance.

Only connect the power cord to a

dedicated, grounded outlet.

120 V – 60 H.

a. Not doing so may be a re hazard and may

cause electrocution.

Please do not unplug power cord with

wet hands.

a. Not doing so may be a re hazard and

possible electrocution may occur.

Please do not operate your if

the hopper is disassembled.

a. Product damage can occur.

Only use the pusher to propel food into

the juicer. Never use fingers or utensils.

Mishandling or dropping the unit

could cause damage or product

failure.

Only operate your on a flat,

solid and steady surface.

a. Not doing so may cause physical injury or

product damage.

Do not use your longer than 20

minutes. Excessive use can cause

overheating and motor failure.

Do not use your if the

|squeezing screw is damaged.

Do not run your without fruit

or vegetables inside the drum.

If you notice an unusual odor or the

unit becomes hot and/or smokes, stop

operation immediately and contact

Customer Service.

Hopper

Product Components

2 Pitchers

Pusher

Juice Cap

Cleaning

brush

Drum

Pulp outlet

Juice outlet

Do not run pitchers in dishwashers with temperature of

158°F or higher.

Squeezing

Screw

Strainer

Dishwasher Safe Parts

Main body

Rubber pad installation

Place the rubber pad until it reaches the line inside.

rubber pad

OPEN

Strainer

Squeezing Screw

Preparations before Use

1 2

1. Assemble squeezing screw and strainer.

* Secure two parts firmly.

Use both hands when opening and closing

squeezing screw and strainer.

- Turn counterclockwise to open.

- Turn clockwise to close.

Machine should only be used on a clean, dry and stable surface. Connect the power cord. Place the provided pitchers

underneath the juice and pulp outlets.

Squeezing screw and strainer assembly

Assembly Instructions

Drum

Main body

Squeezing

screw

Hopper

1 2 3

1. Attach drum to the main body of the machine. 2. Place squeezing screw in the center of the

drum and push down into place.

Use both hands when opening and closing

squeezing screw and strainer.

- Turn counterclockwise to open.

- Turn clockwise to close.

3. Secure the hopper to the drum.

① Make sure the “Open” dot (●) lines up with the “Dot”

on the drum (●).

② Turn the hopper clockwise until it clicks into the drum.

Reverse the steps to

disassemble.

For proper operation,

‘close dot’ (●) on the hopper

should be aligned with ‘dot’

(●) on the drum.

IMPORTANT

How to Use Your

REV

OFF

REV

ON REV

OFF

REV

3 Operational buttons

▶ “ON” position. To activate and

begin making juice.

▶ “REV” position. Reverse operation. This

position should be used to clear a block and

eliminate clogged material.

▶ “OFF” position. Stops .

Use only washed and cleaned produce in

Remove any hard seeds prior to juicing.

Limit ingredient to less than 2.2 lbs. total

for more efficient operation.

Ingredients with more juice content

should be inserted slowly to allow

more extraction.

Turn Machine to “OFF” position after

use.

Unplug prior to disassem-

bling.

For longer life and better results, clean

machine immediately after each use.

Refrigerate any left-over juice.

DO NOT OPERATE MACHINE WITH WET

HANDS.

DO NOT OPERATE MACHINE WITH AN EMPTY

DRUM.

Helpful Tips for Your

Do not use the product

longer than 20 minutes.

Remove any hard seeds

or pits from produce

prior to juicing.

Do not insert too much into

the machine at one time.

Do not insert ingredients

too quickly.

Serious product damage could occur.

Product damage could occur.

Serious injury or product damage could

occur.

Machine may become clogged,

leak and stop functioning.

Do not use utensils or

fingers to move produce

into the drum. Use the

provided pusher only.

When the machine is inoperable, follow the next steps.

Always keep power button clean and dry

to prevent electrical shock.

1. Turn off the machine.

2. Run in “REV” mode for a few seconds to dislodge any clogs.

3. Return machine to “ON” position.

If the problem has not been resolved, turn off the machine, unplug and

disassemble.

Remove any clogs or blockages using the brush tool.

Reassemble and reactivate the machine.

OFF

How to Disassemble and Clean

ジ

ス

ズ

セ

Juice

outlet

Twist the hopper to unlock. Make

sure the “open dot” on the hopper

is aligned with the “open” sign

on the drum before removing the

drum.

Use the brush to thoroughly

clean the squeezing screw after

use.

Disassembly order

① Hopper

② Squeezing screw

③ Strainer

④ Drum

Turn

“OFF” and unplug.

Dry all parts after

cleaning.

Only the drum, squeezing screw

and pitchers are dishwasher

safe. All other parts may be

washed with gentle detergent

in the sink. If need be, the main

body may be cleaned with a soft

dry cloth. Never wet or

submerge the main body in

liquid.

Do not dry parts with a heating

appliance.

Cleaning Tips

Pull out the rubber pad gently

following the arrow.

Removing the rubber pad will allow you to

clean the interior of the strainer thoroughly.

Insert the bottom of rubber

pad rst.

Then push in upward the

rubber pad.

Clean both the inside and the outside of the

strainer and inside the squeezing screw with

enclosed cleaning brush.

- Clean immediately after use.

Rinse the squeezing screw and strainer under running

water to remove any trapped or remaining pulp.

Tip

- Do not use solvents, bleach or abrasives to clean

any part of .

- Always clean immediately after use.

- Do not rinse or submerge the main body in water or

other liquid.

- Use a clean, soft towel to clean the main body, if

needed.

Tip

Troubleshooting

Users might improperly operate the product due to their unfamiliarity with how to use the product. Check the following items to resolve

such issues. If issues cannot be resolved using these procedures, please contact the service center.

Problem Check Possible Solutions

The machine

will not

operate.

• Is the power cord plugged in

correctly?

Make sure the power cord is properly plugged

into the electrical outlet.

• Is the assembled

correctly?

Assemble the product as described

in this user’s manual (refer to p. 7).

• Have you operated your

for longer than

20 minutes?

Turn off your machine. Wait for 7 minutes

before restarting. Do not use your

longer than 20 minutes at a time.

The juice is too

thick or thin.

• Did you assemble the rubber pad

correctly?

Assemble the rubber pad as described on

page 8 of this User’s Manual.

• Did you use fresh ingredients?

Over ripe fruits or vegetables make the

juice thin and weak while under-ripe fruits

can clog the machine and cause the motor

to seize.

• Did you insert too many ingredi-

ents into at one time?

Use small sections of fruits and vegetables

and insert them slowly.

Clean the machine after a several ounces

of juice have been dispensed. If necessary,

disassemble the drum and wash it.

Problem Check Possible Solutions

You are unable

to remove the

drum from the

hopper.

• Are the dots aligned?

Ensure that the “open dot” on the hopper is

aligned with the “dot” on the drum.

has suddenly

stopped.

• Did you force food into the

hopper?

Press the “REV” button for 2 or 3 seconds

then press the “ON’ button to clear any

blockages.

• Is the squeezing screw rotating?

Turn the unit off, unplug and disassemble.

Clean the hopper, drum and screw and

reassemble.

making loud

noises and

shaking.

• is making loud noises

and shaking.

If is assembled properly, it is

normal for the machine to make noise when

juicing over-ripe fruit. Under-ripe fruit may

cause to shake.

The drum is

vibrating while

in use.

• Are all parts assembled properly?

Vibration during juicing is normal. If

overheats, please contact

Customer Service.

Product Specications

Specications

Model name

Product name Juicepresso

CJP-03

120 V

60 Hz

150 W

32 Rpm (at 20N.M)

3.93 ft

DC Motor

10.56lb

5.9 inch

7.6 inch

17.6 inch

Less than 20 minutes continuously

Voltage

Frequency

Power consumption

RPM

Elecrtical cord length

Motor

Weight

Dimensions

Width

Length

Height

Standard usage time

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS.

When using electrical appliances, basic safety precautions should always be followed including the following:

• Read all instructions.

• To protect against risk of electical shock, do not put the motor base in water or other liquid.

• Close supervision is necessary when any appliance is used by or near children.

• Unplug the product from electrical outlet when not in use, before putting on or taking off parts and before cleaning.

• Avoid contact with moving parts.

• DO NOT operate any appliances with a damaged power cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner.

• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.

• DO NOT let cord hang over edge of table counter, or touch hot surfaces.

• DO NOT put your fingers or other objects into the juicer opening while it is in operation. If ingredients become lodged, use the pusher to move it down. If that

does not dislodge the ingredients, turn the unit off, unplug and disassemble the juicer to remove the blockage.

• Do not use the product outdoors.

• Do not place the product on or near heating device.

• Do not use your for any purpose other than its intended use.

• Turn the unit off and unplug after use.

• Only use your after you have read and familiarized yourself with all instructions and operating procedures.

• Do not unplug the unit by pulling the power cord. Unplug by grasping the plug itself and pulling from the outlet.

• Make sure your unit is in the “off” position before connecting the power cord.

WARNING: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet

only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

Do not attempt to modify the plug in any way.