Panasonic TX65HZ2000E Guide de démarrage rapide

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this product and retain them

for future reference.

Please carefully read the “Safety Precautions” of this manual before use.

The images shown in this manual are for illustrative purposes only.

Please refer to Pan European Guarantee Card if you need to contact your local

Panasonic dealer for assistance.

F0320HA1120 English

Model No.

TX-55HZ2000E

TX-65HZ2000E

Operating Instructions

OLED TV

For more detailed instructions, please refer to [eHELP]

(Built-in Operating Instructions).



How to use [eHELP] (p. 23)

(image: TX-65HZ2000E)

English

Nederlands



English

2

Contents

Be Sure to Read

Important Notice··················································· 3

Safety Precautions ··············································· 5

Accessories ························································ 9

Installing the TV ··················································· 9

Installing the wall-hanging bracket ··························13

Connections ·······················································14

Identifying Controls ··············································19

First time Auto Setup ············································21

Watching TV·······················································22

How to Use eHELP ··············································23

FAQs ································································24

Maintenance ······················································25

Specifications ·····················································26

English

3

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator,

Inc. in the United States and other countries.

Dolby, Dolby Vision, Dolby Atmos, Dolby Audio, and the

double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories.

The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Panasonic Corporation is under license.

DVB and the DVB logos are trademarks of the DVB

Project.

x.v.Colour™ is a trademark.

DiSEqC™ is a trademark of EUTELSAT.

This product complies with the UHD Alliance Technical

Specification: UHDA Specified Reference Mode, Version

1.0.1. FILMMAKER MODE™ logo is a trademark of

the UHD Alliance, Inc. in the United States and other

countries.



For information about the trademarks, refer to

[eHELP] (Search by Purpose > Read first >

Before use > Licence).

The illustration for TX-65HZ2000E is used in this

manual unless otherwise mentioned.

Illustrations shown may be different depending on

the model.

Important Notice

Installing environment

This TV has “Space Tune” function which can adjust

the sound quality automatically according to TV and

viewer’s position. With the left-center-right speakers and

the Upward-firing speakers using the upward-resonance

against the ceiling, the spatial sound space can be

achieved. “Space Tune Setting” automatically starts

when the TV is turned on for the first time after installing

this TV and connecting with the external equipment,

follow the on-screen instructions for setting.

(p. 21)



This function is effective only for the sound from TV

speakers.



The effect varies depending on the installing

environment.

A

B

: Upward-firing speakers

: Left-center-right speakers

Do not display any still part of the image

for a long period

In such cases the still part of the image remains dimly

on the screen (“image retention”). This is not considered

a malfunction and is not covered by the warranty.



Typical still image parts:



Still images shown continuously on the same area

(ex. channel number, channel logo, other logos or

title image, etc.)



Still or moving pictures viewed in

4:3 or 14:9 aspect ratio, etc.



Video games

English

4



To avoid image retention, the screen saver may

be activated (OLED logo moves) or the on-screen

message may move after a few minutes if no signals

are sent or no operations are performed.



Set [Logo Luminance Control] to [Max] to avoid image

retention.

[eHELP] (Search by Purpose > Settings > Picture >

Screen Settings > Logo Luminance Control)



To avoid image retention, the screen may become

dim when the motionless image is displayed. This

is not a malfunction. The brightness of the screen

returns to the previous level when the active image is

displayed.



Be sure to turn the TV off with the remote control to

perform the panel maintenance. During the panel

maintenance, LED turns to orange. (p. 20) The

maintenance works as necessary.



Set aspect ratio to [4:3 Full] for 4:3 image. For details,

refer to [eHELP] (Search by Purpose > Watching >

For best picture).



For more information

“Panel maintenance” (p. 21)

Notice for DVB / Data broadcasting /

IPTV functions



This TV is designed to meet the standards (as of

August, 2019) of DVB-T / T2 (MPEG2, MPEG4-

AVC(H.264) and MPEG HEVC(H.265)) digital

terrestrial services, DVB-C (MPEG2, MPEG4-

AVC(H.264) and MPEG HEVC(H.265)) digital cable

services and DVB-S (MPEG2, MPEG4-AVC(H.264)

and MPEG HEVC(H.265)) digital satellite services.

Consult your local dealer for availability of DVB-T / T2

or DVB-S services in your area.

Consult your cable service provider for availability of

DVB-C services with this TV.



This TV may not work correctly with the signal which

does not meet the standards of DVB-T / T2, DVB-C

or DVB-S.



Not all the features are available depending on the

country, area, broadcaster, service provider, satellite

and network environment.



Not all CI modules work properly with this TV. Consult

your service provider about the available CI module.



This TV may not work correctly with CI module that is

not approved by the service provider.



Additional fees may be charged depending on the

service provider.



Compatibility with future services is not guaranteed.

Internet apps are provided by their respective service

providers, and may be changed, interrupted, or

discontinued at any time.

Panasonic assumes no responsibility and makes no

warranty for the availability or the continuity of the

services.

Panasonic does not guarantee operation and

performance of peripheral devices made by other

manufacturers; and we disclaim any liability or damage

arising from operation and/or performance from usage of

such other maker’s peripheral devices.

Handling of customer information

Certain customer information such as IP address of your

device (this TV)’s network interface will be collected as

soon as you connect your Panasonic-branded smart

television (this TV) or other devices to the internet

(excerpted from our privacy policy). We do this to protect

our customers and the integrity of our Service as well as

to protect the rights or property of Panasonic. If you wish

to know more about the processing of your information

in this context, please refer to the full text of our privacy

policy displayed at [eHELP] (Search by Purpose >

Network > Network settings > Terms of Service and

Settings).

When using Internet connecting function of this TV,

after agreeing (in the jurisdictions where customer’s

consent is required to collect personal information under

applicable privacy laws) to or reviewing Panasonic’s

terms of service / privacy policy (hereinafter referred to

as terms and conditions etc.), customer information on

the use of this unit may be collected and used according

to terms and conditions etc.

For details of terms of service / privacy policy, refer

to [eHELP] (Search by Purpose > Network > Network

settings > Terms of Service and Settings).

Customer’s personal information may be recorded on

this TV by broadcasting organization or application

provider. Before repairing, transferring or discarding

this TV, erase all the information recorded on this TV

according to the following procedure.

[eHELP] (Search by Purpose > Functions > Shipping

Condition)

Customer information may be collected by provider

via application provided by third parties on this TV or

website. Please confirm the terms and conditions etc. of

provider in advance.



Panasonic will not be held responsible for collecting

or using customer information via application provided

by third party on this TV or website.

English

5



When entering your credit card number, name, etc.,

pay special attention to the trustworthiness of the

provider.



Registered information may be registered in the

server etc. of provider. Before repairing, transferring

or discarding this TV, be sure to erase the information

according to the terms and conditions etc. of provider.

The recording and playback of content on this or any

other device may require permission from the owner

of the copyright or other such rights in that content.

Panasonic has no authority to and does not grant

you that permission and explicitly disclaims any right,

ability or intention to obtain such permission on your

behalf. It is your responsibility to ensure that your use

of this or any other device complies with applicable

copyright legislation in your country. Please refer to that

legislation for more information on the relevant laws and

regulations involved or contact the owner of the rights in

the content you wish to record or playback.

This product is licensed under the AVC patent portfolio

license for the personal use of a consumer or other uses

in which it does not receive remuneration to (i) encode

video in compliance with the AVC Standard (“AVC

Video”) and/or (ii) decode AVC Video that was encoded

by a consumer engaged in a personal activity and/or

was obtained from a video provider licensed to provide

AVC Video. No license is granted or shall be implied for

any other use.

Additional information may be obtained from MPEG LA,

LLC.

See http://www.mpegla.com.

This mark indicates the product operates on AC voltage.

This mark indicates a Class II or double insulated

electrical appliance wherein the product does not require

a safety connection to electrical earth (ground).

Transport only in upright position.

Safety Precautions

To help avoid risk of electrical shock, fire, damage or

injury, please follow the warnings and cautions below:

 Mains plug and lead

Warning

If you detect anything unusual,

immediately remove the mains

plug.



This TV is designed to operate on AC

220-240 V,

50 / 60 Hz.



Insert the mains plug fully into the mains socket.



To turn Off the apparatus completely, you must pull

the mains plug out of the mains socket.

Consequently, the mains plug should be easily

accessible at all times.



Disconnect the mains plug when cleaning the TV.



Do not touch the mains plug with wet

hands.



Do not damage the mains lead.



Do not place a heavy

object on the lead.



Do not place the lead near

a high temperature object.



Do not pull on the lead.

Hold onto the mains plug

body when disconnecting

the plug.



Do not move the TV with the lead plugged into a

mains socket.



Do not twist the lead, bend it excessively or stretch

it.



Do not use a damaged mains plug or mains

socket.



Ensure the TV does not crush the mains lead.

English

6

 Take care

Warning



Do not remove covers and never

modify the TV yourself as live

parts are accessible and risk

of electric shock when they are

removed. There are no user

serviceable parts inside.



Do not expose the TV to rain

or excessive moisture. This

TV must not be exposed to

dripping or splashing water

and objects filled with liquid,

such as vases, must not be

placed on top of or above

the TV.



Do not insert foreign objects into the TV through the

air vents.



If the TV is used in an area where insects may easily

enter the TV.

It is possible for insects to enter the TV, such as small

flies, spiders, ants, etc. which may cause damage to

the TV or become trapped in an area visible on the

TV, e.g. within the screen.



If the TV is used in an environment where there is

dust or smoke.

It is possible for dust/smoke particles to enter the TV

through the air vents during normal operation which

can become trapped inside the unit. This may cause

overheating, malfunction, deterioration in picture

quality, etc.



Do not use an unapproved pedestal / mounting

equipment. Be sure to ask your local Panasonic

dealer to perform the setup or installation of approved

wall-hanging brackets.



Do not apply any strong force or impact to the display

panel.



Ensure that children do not climb on the TV.



Do not place the TV on

sloping or unstable surfaces,

and ensure that the TV does

not hang over the edge of

the base.

Warning Stability Hazard

A TV may fall, causing serious personal injury or

death. Many injuries, particularly to children, can

be avoided by taking simple precautions such as:



ALWAYS use cabinets or stands or mounting

methods recommended by the manufacturer of

the TV.



ALWAYS use furniture that can safely support

the TV.



ALWAYS ensure the TV is not overhanging the

edge of the supporting furniture.



ALWAYS educate children about the dangers

of climbing on furniture to reach the TV or its

controls.



ALWAYS route cords and cables connected to

your TV so they cannot be tripped over, pulled

or grabbed.



NEVER place a TV in an unstable location.



NEVER place the TV on tall furniture (for

example, cupboards or bookcases) without

anchoring both the furniture and the TV to a

suitable support.



NEVER place the TV on cloth or other materials

that may be located between the TV and

supporting furniture.



NEVER place items that might tempt children

to climb, such as toys and remote controls, on

the top of the TV or furniture on which the TV

is placed.

If the existing TV is going to be retained and

relocated, the same considerations as above

should be applied.



This TV is designed for table-top use.



Do not expose the TV to

direct sunlight and other

sources of heat.

To prevent the

spread of fire, keep

candles or other

open flames away

from this product at

all times

English

7

 Suffocation / Choking Hazard

Warning



The packaging of this product may cause suffocation,

and some of the parts are small and may present a

choking hazard to young children. Keep these parts

out of reach of young children.

 Pedestal

Warning



Do not disassemble or modify the pedestal.

Caution



Do not use any pedestal other than the one provided

with this TV.



Do not use the pedestal if it becomes warped or

physically damaged. If this occurs, contact your

nearest Panasonic dealer immediately.



During setup, make sure that all screws are securely

tightened.



Ensure that the TV does not suffer any impact during

installation of the pedestal.



Ensure that children do not climb onto the pedestal.



Install or remove the TV from the pedestal with at

least two people.



Install or remove the TV according to the specified

procedure.

 Radio waves

Warning



Do not use the TV in any medical institutions or

locations with medical equipment. Radio waves may

interfere with the medical equipment and may cause

accidents due to malfunction.



Do not use the TV near any automatic control

equipment such as automatic doors or fire alarms.

Radio waves may interfere with the automatic

control equipment and may cause accidents due to

malfunction.



Keep at least 15 cm away from the TV if you have a

cardiac pacemaker. Radio waves may interfere with

the operation of the pacemaker.



Do not disassemble or alter the TV in any way.

 Built-in wireless LAN

Caution



Do not use the built-in wireless LAN to connect to any

wireless network (SSID

*

) for which you do not have

usage rights. Such networks may be listed as a result

of searches. However, using them may be regarded

as illegal access.

SSID is a name for identifying a particular wireless

network for transmission.



Do not subject the built-in wireless LAN to high

temperatures, direct sunlight or moisture.



Data transmitted and received over radio waves may

be intercepted and monitored.



The built-in wireless LAN uses 2.4 GHz and 5 GHz

frequency bands. To avoid malfunctions or slow

response caused by radio wave interference when

using the built-in wireless LAN, keep the TV away

from other devices that use 2.4 GHz and

5 GHz signals such as other wireless LAN devices,

microwave ovens, and mobile phones.



When problems occur due to static electricity, etc., the

TV might stop operating to protect itself. In this case,

turn the TV off at the Mains power On / Off switch,

then turn it back on.

 Bluetooth

®

wireless technology

Caution



The TV uses the 2.4 GHz radio frequency ISM band

(Bluetooth

®

). To avoid malfunctions or slow response

caused by radio wave interference, keep the TV away

from the devices such as other wireless LAN devices,

other Bluetooth devices, microwaves, mobile phones

and the devices that use 2.4 GHz signal.

 Ventilation

Caution

Allow sufficient space (at least 10 cm) around the TV in

order to help prevent excessive heat, which could lead

to early failure of some electronic components.

(cm)

10



Ventilation should not be

impeded by covering the

ventilation openings with

items such as newspapers,

tablecloths and curtains.



Whether you are using a pedestal or not, always

ensure the vents at the bottom of the TV are not

blocked and there is sufficient space to enable

adequate ventilation.

English

8

 Moving the TV

Caution

Before moving the TV, disconnect all cables.



At least two people are required to move the TV to

prevent injury that may be caused by the tipping or

falling of TV.



Do not hold the screen part as shown below when

moving the TV. This may cause malfunction or

damage.

How to carry the TV.

(p. 10)



Transport only in upright position. Transporting the TV

with its display panel facing upwards or downwards

may cause damage to the internal circuitry.

 When not in use for a long time

Caution

This TV will still consume some power even in the Off

mode, as long as the mains plug is still connected to a

live mains socket.



Remove the mains plug from the wall socket when

the TV is not in use for a prolonged period of time.

 Excessive volume

Caution



Do not expose your ears to

excessive volume from the

headphones. Irreversible

damage can be caused.



If you hear a drumming noise in your ears, turn down

the volume or temporarily stop using the headphones.

 Battery for the Remote Control

Caution



Incorrect installation may cause battery leakage,

corrosion and explosion.



Replace only with the same or equivalent type.



Do not mix old and new batteries.



Do not mix different battery types (such as alkaline

and manganese batteries).



Do not use rechargeable batteries (Ni-Cd, etc.).



Do not burn or break up batteries.



Do not expose batteries to excessive heat such as

sunshine, fire or the like.



Make sure you dispose of batteries correctly.



Remove the battery from the unit when not using for

a prolonged period of time to prevent battery leakage,

corrosion and explosion.

OLED TV

Declaration of Conformity (DoC)

“Hereby, Panasonic Corporation declares that this TV is

in compliance with the essential requirements and other

relevant provisions of the Directive 2014/53/EU.”

If you want to get a copy of the original DoC of this TV,

please visit the following website:

https://www.ptc.panasonic.eu/compliance-documents

Authorized Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, D-22525 Hamburg, Germany

5.15 – 5.35 GHz band of wireless LAN is

restricted to indoor operation only in the

following countries.

Austria, Belgium, Bulgaria, Czech Republic, Denmark,

Estonia, France, Germany, Iceland, Italy, Greece, Spain,

Cyprus, Latvia, Liechtenstein, Lithuania, Luxembourg,

Hungary, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovenia, Slovakia, Turkey, Finland, Sweden,

Switzerland, Croatia

Maximum radio-frequency power transmitted in the

frequency bands

Type of wireless Frequency band Maximum EIRP

Wireless LAN

2412-2472 MHz 20 dBm

5150-5250 MHz 23 dBm

5250-5350 MHz 23 dBm

5470-5725 MHz 23 dBm

Bluetooth 2402-2480 MHz 9 dBm

English

9

Accessories

Standard accessories

Remote Control

(p. 19)



N2QAYA000219

Pedestal

(p. 9)

Cable clamp

(p. 12)

Cable clamp

(p. 11)

Cable tie (2)

(p. 11)

Batteries (2)



R03

(p. 20)

Operating Instructions

Pan European Guarantee Card



Accessories may not be placed all together. Take care

not to throw them away unintentionally.

Installing the TV

Pedestal

Assembly screw (4)

M4 × 15

Pedestal cover

Preparations



Do not hold the screen panel part.



Make sure not to scratch or break the TV.



Do not place the TV temporarily on the floor or desk.

English

10

Assembling the pedestal



Insert the pedestal firmly, otherwise it may come off

when setting up the TV.



Do not apply any strong force to the speaker part in

front of this TV.



Do not assemble the pedestal by any method other

than those specified below.

A

B

Connecting the cables

 Removing the terminal cover



Be sure to remove the terminal cover before

connecting or disconnecting cables.



When the connections are completed, attach the

terminal cover / pedestal cover.

(p. 12)

Terminal cover

 Connecting the aerial and external

equipment (p. 14)

Speaker part in front of this TV

English

11

Cable arrangement

Fix the cables using the cable clamp, cable tie, etc. and

then attach the terminal cover / pedestal cover to the TV.



The terminal cover / pedestal cover may not be

attached depending on the number of cables.

 Fixing the Mains lead using the cable clamp

Attach the cable clamp

Insert the cable clamp in a hole

Hole

Bundle the cable

Set

To release:

Keep pushing the tab

Tab

To remove from the TV:

Keep pushing both side snaps

Snaps

 Fixing the cables using the cable tie

Attach the cable tie

Insert the cable tie in a hole

Hole

Bundle the cables

Hooks

Set the tip in the hooks

To loosen:

Knob

Keep pushing the knob

To remove from the TV:

Keep pushing both side snaps

Snaps

English

12

Cable clamp



Fix cables as necessary.



When using the optional accessory, follow the option’s

assembly manual to fix cables.



Attaching the terminal cover / pedestal

cover



Be careful not to nip the cables between the TV and

the terminal cover / pedestal cover.



When using USB 2 port, USB 3 port, AV IN terminal,

DIGITAL AUDIO OUT, HDMI3 terminal or HDMI4

terminal, you cannot attach the terminal cover. Keep

the removed cover for future use.



Do not apply load to the terminal cover / pedestal

cover.

Terminal cover

C

English

13

C

To remove from the TV:

C

Removing the pedestal

Be sure to remove the pedestal in the following

procedures when you use the wall-hanging bracket or

repack the TV.

1

Remove the pedestal cover

.

2

Remove the assembly screws

from the pedestal.

3 Pull out the pedestal from the TV.

Installing the wall-

hanging bracket

Please contact your local Panasonic dealer to purchase

the recommended wall-hanging bracket.



Holes for wall-hanging bracket installation

Rear of the TV

300 mm

(View from the side)

Depth of screw

minimum: 14 mm

maximum: 28 mm

Diameter: M6

Screw for fixing the TV onto the

wall-hanging bracket (not supplied with

the TV)

Warning



Using other wall-hanging brackets, or installing a wall-

hanging bracket by yourself have the risk of personal

injury and product damage. In order to maintain the

unit’s performance and safety, be absolutely sure to

ask your dealer or a licensed contractor to secure

the wall-hanging brackets. Any damage caused by

installing without a qualified installer will void your

warranty.



Carefully read the instructions accompanying optional

accessories, and be absolutely sure to take steps to

prevent the TV from falling off.



Handle the TV carefully during installation since

subjecting it to impact or other forces may cause

product damage.



Take care when fixing wall brackets to the wall.

Always ensure that there are no electrical cables or

pipes in the wall before hanging bracket.



To prevent fall and injury, remove the TV from its fixed

wall position when it is no longer in use.

English

14

Connections



External equipment and cables shown are not

supplied with this TV.



Please ensure that the unit is disconnected from the

mains socket before attaching or disconnecting any

cables.



Check the terminal type and cable plugs are correct

for connection.



Use a fully wired HDMI compliant cable.



Keep the TV away from electronic equipment (video

equipment, etc.) or equipment with an infrared sensor,

otherwise distortion of image / sound may occur or

operation of other equipment may be affected.



Please also read the manual of the equipment being

connected.

Terminals

2

3

4

5

6

7

1

8

910

11 12

1 Model name plate

2 CI slot 1 - 2

(p. 18)

3 Headphone / Subwoofer jack (p. 17, 18)

4 HDMI1 - 2 (p. 16, 17)

5 USB 1 port

This symbol indicates DC operation.

6 Terrestrial / cable terminal

(p. 14)

7 Satellite terminal (p. 14)

8 ETHERNET terminal

(p. 16)

9 USB 2 - 3 port

This symbol indicates DC operation.

10

HDMI3 - 4

11

AV IN (COMPONENT / VIDEO) (p. 17)

12

DIGITAL AUDIO OUT (p. 17)



To watch content in 4K format, use HDMI terminal.

(p. 16)

Basic connections

 Mains lead

AC 220-240 V

50 / 60 Hz

Mains lead

Cable tie (Bundled the mains lead)

To loosen:

Knob

Keep pushing the knob

To remove from the TV:

Keep pushing both side snaps

Snaps

 Aerial

TV

Cable

RF cable

Terrestrial aerial



For DVB-C, DVB-T, Analogue

Satellite connection



For DVB-S

English

15

 Dual Tuner (DiSEqC)

TV

Satellite cables with Multiswitch

Satellite dish

 Dual Tuner (Single Cable System)

TV

Satellite cable with Single Cable router

Satellite dish

 Single Tuner

TV

Satellite cable

Satellite dish



To ensure your satellite dish is correctly installed,

please consult your local dealer. Also consult the

received satellite broadcasting companies for details.

DVB-via-IP server connection

This TV can be configured as a DVB-via-IP server to

provide broadcast streaming to another TV supporting

DVB-via-IP client function or SAT>IP compatible

devices.

TV

LAN cable (Shielded)



Use Shielded Twist Pair (STP) LAN cable.

Hub / Router

DVB-via-IP client (Panasonic TV, etc.)



This function may not be available depending on

network condition and broadcast.



Dual tuner function (watching or recording 2

programmes simultaneously, etc.) is not available

while using DVB-via-IP server function.



For details, refer to [eHELP] (Search by Purpose >

Functions > DVB-via-IP).

DVB-via-IP client connection

This TV has DVB-via-IP client function and can connect

to DVB-via-IP server or SAT>IP compatible servers to

receive broadcast streaming.



It is recommended to connect to DVB-via-IP server

with a LAN cable.

 Wired connection

TV

Cable

LAN cable (Shielded)



Use Shielded Twist Pair (STP) LAN cable.

DVB-via-IP server

RF cable

Terrestrial aerial

Satellite dish

 Wireless connection

Cable

Built-in wireless LAN (Rear of the TV)

Access point

DVB-via-IP server

RF cable

Terrestrial aerial

Satellite dish



This function may not be available depending on

network condition and broadcast.



For information about the connections, read the

manual of the DVB-via-IP server.



For details, refer to [eHELP] (Search by Purpose >

Functions > DVB-via-IP).

English

16

AV devices

 DVD Recorder / Blu-ray Recorder, etc.

TV

Cable

RF cable

HDMI cable

DVD Recorder / Blu-ray Recorder, etc.

Terrestrial aerial

 Set top box

TV

Cable

HDMI cable

Set top box

Network

A broadband network environment is required to be able

to use internet services.



If you do not have any broadband network services,

please consult your retailer for assistance.



Prepare the internet environment for wired connection

or wireless connection.



Setup of the network connection will start when first

using the TV.

(p. 21)

 Wired connection

TV

Internet

environment

LAN cable (Shielded)



Use Shielded Twist Pair (STP) LAN cable.

 Wireless connection

Internet

environment

Built-in wireless LAN (Rear of the TV)

Access point

Connections for 4K / HDR compatible

equipment

TV

HDMI cable

4K / HDR compatible equipment



Reproduces the image more precisely with the

expanded colour gamut when connecting the

4K-compatible equipment. Mode2 is a mode that

supports higher definition signals than Mode1. Set to

Mode1 when the image or sound in HDMI input is not

played properly.



Connect the 4K compatible equipment to HDMI

terminal using a 4K compatible cable and you can

watch content in 4K format.



Supporting HDR does not increase the peak

brightness capabilities of the TV panel.

 [HDMI Auto Setting] (Setup Menu)

Reproduces the image more precisely with the

expanded colour gamut when connecting the 4K

compatible equipment. Select the mode depending on

the equipment.

[Mode1]:

For better compatibility. Set to [Mode1] when the

image or sound in HDMI input is not played properly.

[Mode2]:

For the 4K compatible equipment that has the

function to output the image precisely with the

expanded colour gamut



To change the mode

1. Select the HDMI input mode connected to the

equipment.

2. Display the menu and select [HDMI Auto Setting]

(Setup Menu).



For information about the valid format, refer to

[eHELP] (Search by Purpose > Watching > 4K

resolution > HDMI Auto Setting).

English

17

Other connections

 DVD Player

(COMPONENT equipment)

TV

(Viewing)

(Listening)

Audio cable (Shielded)



Use shielded audio cables.

Component video cable (Shielded)



Use shielded composite cable.

DVD Player

 Camcorder / Game equipment

(VIDEO equipment)

TV

(Viewing)

(Listening)

Audio cable (Shielded)



Use shielded audio cables.

Composite video cable (Shielded)



Use shielded composite cable.

Camcorder / Game equipment

 Amplifier (listening with external speakers)



To enjoy multi-channel sound from external

equipment (e.g. Dolby Digital 5.1ch), connect the

equipment to the amplifier. For information about the

connections, read the manuals of the equipment and

amplifier.

TV

HDMI cable

Amplifier with speaker system

External equipment (DVD Player, etc.)



Use HDMI2 to connect the TV to an amplifier which

has eARC (Enhanced Audio Return Channel) / ARC

(Audio Return Channel) function.



If connecting to an amplifier without eARC / ARC

function, use DIGITAL AUDIO.

TV

Optical cable

DIGITAL AUDIO IN

e.g. Amplifier with speaker system

 Headphones



To use headphones, set [Headphone Terminal

Output] to [Headphone].



For information about the headphone terminal output

settings, refer to [eHELP] (Search by Purpose >

Settings > Sound).

TV

(3.5 mm stereo mini plug)

English

18

 Subwoofer



To use the subwoofer, set [Headphone Terminal

Output] to [Sub Woofer]. (The subwoofer output from

the TV is the same for both L and R.)



For information about the headphone terminal output

settings, refer to [eHELP] (Search by Purpose >

Settings > Sound).

TV

Audio cable (3.5 mm stereo mini

plug - audio pin plug)

 Common Interface



Turn the TV off with Mains Power On / Off switch

whenever inserting or removing the CI module.



If a smart card and a CI module come as a set, first

insert the CI module, then insert the smart card into

the CI module.



Insert or remove the CI module completely in the

correct direction as shown.



Normally encrypted channels will appear. (Viewable

channels and their features depend on the CI

module.)

If encrypted channels do not appear

[Common Interface] in the Setup Menu



There might be some CI modules in the market

with older firmware versions that do not work fully

interoperable with this new CI+ v1.4 TV. In this case,

please contact your content provider.



For details, refer to [eHELP] (Search by Purpose >

Functions > Common Interface), read the manual of

the CI module, or check with the content provider.



Be sure to remove the CI module card, etc. before

repairing, transferring or discarding.

TV

CI module

 USB HDD (for recording)



Use USB 1 port for connecting the USB HDD.



For details, refer to [eHELP] (Search by Purpose >

Recording).

 VIERA Link



Use HDMI1 - 4 for VIERA Link connection.



For details, refer to [eHELP] (Search by Purpose >

Functions > VIERA Link “HDAVI Control™”).

English

19

Identifying Controls

Remote Control

1 [ ]: Switches TV On or Off (Standby)

2 [Main Menu]



Press to access Picture, Sound, Network, Timer,

Setup and Help Menus, etc.

3 PICTURE



Changes Viewing Mode.

4 Coloured buttons

(red-green-yellow-blue)



Used for the selection, navigation and operation of

various functions.

5 Information



Displays channel and programme information.

6 OK



Confirms selections and choices.



Press after selecting channel positions to quickly

change channel.

7 [Option Menu]



Easy optional setting for viewing, sound, etc.

8 NETFLIX



Accesses NETFLIX service directly.



A broadband network environment is required in

order to fully use this function.



This service may be stopped or changed without

notice.

9 Sound Mute On / Off

10

Teletext button

11

Volume Up / Down

12

Numeric buttons



Changes channel and teletext pages.



Sets characters.



When in Standby mode, switches TV on.

13

[eHELP]



Displays [eHELP] (Built-in Operating Instructions).

14

[MY APP]



Assigns a favourite application. After setting, starts

the application easily by pressing this button.



For details, refer to [eHELP] (Search by Purpose >

Home > Apps).

15

LIGHT



Lights the buttons for about 5 seconds. Press

again to turn off the button lights.

16

Input mode selection



TV - switches to DVB-S / DVB-C / DVB-T /

DVB-via-IP / Analogue.



AV - switches to AV input mode from Input

Selection list.

17

EXIT



Returns to the normal viewing screen.

18

Cursor buttons



Makes selections and adjustments.

19

Return



Returns to the previous menu / page.

20

HOME



Displays [Home].



For details, refer to [eHELP] (Search by Purpose >

Read first > Features).

21

TV Guide



Displays Electronic Programme Guide.

22

PROVIDER/LIST



Starts operator application or displays channel list.

23

Subtitles



Displays subtitles.

24

Channel Up / Down

English

20

25

Last view



Switches to previously viewed channel or input

mode.

26

Operations for contents, connected equipment,

etc.

 Installing / Removing batteries

Pull open

Hook

Note the correct polarity

(+ or -)

Close

Remote Control Mode setting

If another Panasonic TV is near the TV, the other TV

may be operated when you use the remote control.

Change the TV’s remote control mode to avoid

simultaneous operation.



Remote control mode 1 is the default setting.

1 Display the menu and select [Setup]

Setup

select

access

2 Select the remote control setting menu in the [System

Menu]

select

access

3 Select the remote control mode in [Mode Setting]

select

access

4 Select [Mode2]

select

access



Press and hold [OK]/[MUTE]/[2]* (numeric buttons)

buttons for at least 3 seconds, then press the OK

button.

To set to [Mode1], set to “1”, to set to [Mode3], set

to “3”, to set to [Mode4], set to “4”.



When using the remote control mode 1, set the TV

and the remote control to mode 1 respectively.

 Remote Control Mode Error

When the TV receives a signal with a different remote

control mode to the mode that is set on the TV five

times, Remote Control Mode Error is displayed.



Follow the on-screen instructions.



When all settings are initialised by performing Shipping

Condition, the TV’s remote control mode is reset to

mode 1. If you cannot operate the TV with your remote

control, press and hold [OK]/[MUTE]/[1] buttons for at

least 3 seconds to set the remote control to mode 1.

 Remote Control Mode Reset

You can make a forced reset of the TV’s remote control

mode to change to mode 1.

1 Get another Panasonic remote control whose remote

control mode has been set to 1

2 Point the remote control at the TV, then press the

MUTE button for about 15 seconds

3 When a screen asking you to confirm the forced reset

of the remote control mode is displayed, press the

MUTE button again for about 3 seconds

Indicator / Control panel



When pressing 4, 5, 6 buttons, the control panel

guide appears on the right side of the screen for

3 seconds to highlight which button has been

pressed.

5

6

7

4

1 2, 3

Rear side of the TV

1 Power LED

Red:

Standby

La page charge ...

Panasonic TX65HZ2000E Guide de démarrage rapide

Ce manuel convient également à

Panasonic TX65HZ2000E Guide de démarrage rapide

dans d''autres langues

Documents connexes