Maytag MHW8000A Series Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

Ce manuel convient également à

Guide
isation d'entretien
FRONT-LOADINGAUTOMATICWASHER
LAVEUSEAUTOlViATIQUEA CHARGEiVlENTFRONTAL
Para obtener acceso
al Manual de uso y cuidado
en espaSol, o para obtener
informaci6n adicional acerca
de su producto, visite:
www.maytag.com
Wl 0441101A
Wl 0441102A - SP
If you have any problems or questions, visit us at www.maytag.com
Pour tout probleme ou question, consulter www.maytag.ca
Designed to use only HE
High Efficiency detergents.
Conque pour I'utilisation
d'un detergent haute
efficacite seulement.
Certified to Sanitize and to Reduce Allergens
Homologue pour assainir et pour reduire la
presence d'allergenes
TABLEOFCONTENTS
WASHER SAFETY..................................................................................2
ACCESSORIES.......................................................................................3
CONTROL PANELAND FEATURES.................................................4
USING THE OPTIMALDISPENSEDRAWER................................7
CYCLEGUIDE..........................................................................................8
USING YOUR WASHER....................................................................10
WASHER MAINTENANCE................................................................14
ABOUT DETERGENTCONCENTRATION...................................17
TROUBLESHOOTING........................................................................18
WARRANTY...........................................................................................25
ASSISTANCEOR SERVICE............................................. Back Cover
TABLEDES iVlATIERES
SECURITEDE LALAVEUSE.............................................................26
ACCESSOIRES....................................................................................27
TABLEAUDECOMMANDE ETCARACTERISTIQUES............28
UTILISATIONDU TIROIROPTIMALDISPENSE.........................31
GUIDE DE PROGRAMMES.............................................................32
UTILISATIONDE LA LAVEUSE........................................................34
ENTRETIENDELA LAVEUSE..........................................................38
/_,PROPOS DELA CONCENTRATIONDU DETERGENT......41
DEPANNAGE.........................................................................................42
GARANTIE..............................................................................................51
ASSISTANCEOU SERVICE................................. Couverturearriere
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will teii you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS iS
EXPLOSIVE. if the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
[]
[]
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach into the washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where it will be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructions for grounding instructions.
this time.
SAVE THESE iNSTRUCTiONS
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
ACCESSORIES
Customize your new washer and dryer with the following
genuine Maytag accessories. For more information on options and
ordering, contact your dealer, call us at 1-800-901-2042, or visit:
www.maytag.com/accessories.
In Canada, call 1-800-807-6777, or visit: www.maytag.ca.
15" Pedestal
Color-matched pedestals raise the washer
and dryer to a more comfortable working
height. The large drawer provides convenient
storage.
Worksurface
The worksurface bridges the
washer and dryer, and provides
a convenient working and storage
area.
Stack Kit
Ifspace is at a premium, the stack kit
allows the dryer to be installed on top
of the washer.
Optimal Dispense Liquid HE
Detergent Cartridge
Ifyou frequently alternate between two
different liquid HE detergents, you may
also purchase an additional cartridge.
Single-Dose Liquid
HE Detergent Cup
The cup provides a way to dispense
a single close of liquid detergent.
3
CONTROLPANELAND FEATURES
Not all features and cycles are available on all models.
Model M HW8000A*
NOTE: The control panel features a sensitive surface that responds to a
light touch of your finger. To ensure your selections are registered, touch
the control panel with your finger tip, not your fingernail. When selecting a
setting or option, simply touch its name.
O
_ Optimal Dispense liquid HE detergent
cartridge
_ Powdered HE detergent compartment
_ Liquid fabric softener
_ Chlorine bleach
@
0
0
0
4
POWER/CANCEL
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
NOTE: For best results when using the Overnight Wash & Dry
cycle, use for loads weighing 2.5 pounds and less, such as a
soccer uniform or a running tank and shorts.
START
Touch and hold until the light above START comes on to start
a cycle, or touch once while a cycle is in process to pause it.
If you want to add a garment, you can touch START when the
"Add a Garment" LED is on.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Cycle Time will be displayed. Factors such as
load size, wash temperature, and water pressure may affect the
time shown in the display. Tightly packing garments, unbalanced
loads, or excessive suds may cause the washer to lengthen the
cycle time, as wee
Touch the desired option along the bottom of the display to
adjust settings. See "Cycle Guide" for available settings on
each cycle. Not all settings are available with all cycles.
Temperature
The recommended wash temperature is preset for each cycle.
You may also select a wash temperature based on the type of
fabric and soils being washed. For best results, use the warmest
wash water safe for your fabric, following the garment label
instructions. All wash temperatures feature a cold rinse.
Soil Level
Soil Level (wash time) is preset for each wash cycle. When you
change the soil setting, the cycle time will increase or decrease in
the Estimated Cycle Time display.
For most loads, use the soil level that is preset with the cycle
you have chosen. For heavily soiled and sturdy fabrics, use the
Soil Level setting to select more wash time. For lightly soiled and
delicate fabrics, use the Soil Level setting to select less wash
time. Lower soil level settings will help reduce tangling and
wrinkling.
Spin Speed
This washer automatically selects the spin speed based
on the cycle selected. Some preset speeds can be changed.
[] Higher spin speeds mean shorter dry times, but may
increase wrinkling in your load.
[] Lower spin speeds reduce wrinkling, but will leave your load
more damp.
O
OPTIMAL DISPENSE - DETERGENT
CONCENTRATION AND WATER HARDNESS
Touch - or + to set detergent concentration from 2x to 8x. Touch
WATER HARDNESS to set water hardness level (normal, hard,
or soft). (See "About Detergent Concentration" section.)
IM PORTANT: When using the dispenser cartridge with
concentrated liquid detergent, be sure to change the detergent
concentration settings in the control if the detergent used is
different than factory preset of 2x concentration.
O Cycle Status Lights
For details, see "Cycle Status Lights".
OPTIONS
Touch to activate additional wash options or additional features
on the washer. Not all options are available on all models.
_ elect Delay Hrs.
Touch this option to delay the start of the wash cycle by up
to 12 hours.
_ resh Hold _ Option
The Fresh Hold R'option will periodically tumble the load
after the end of the cycle for up to 12 hours while the
integrated fan circulates air through the washer to reduce
humidity. To turn on the Fresh Hold:" option, touch Fresh
Hold. If, however, the Fresh Hold:" option is turned on, it
will stay on for all future cycles until turned back off - the
washer remembers the last on/off status set. To turn off
the Fresh Hold ° option, touch Fresh Hold.
You may also activate the Fresh Hold ° option without
running a cycle by touching and holding POWER/
CANCEL for one second, then touching and holding
Fresh Hold" option for 3 seconds, then touching and
holding START for 3 seconds.
To turn off the Fresh Hold ° option when it is running, touch
POWE R/CAN CE L.
NOTE: The door will lock while the Fresh Hold _ option
is active. To cancel the option and unlock the door, touch
POWE R/CAN CE L.
_ team for Stains
The Steam for Stains option adds additional soak and wash
time to many cycles to help remove tough stains, as well
as a steam boost for added cleaning power. An integrated
heater helps to maintain optimal wash temperatures. See
the "Cycle Guide" for cycles that allow the Steam for Stains
option.
_ xtra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles include this feature as a default.
See "Cycle Guide" for details.
Drum Light
Touch and hold EXTRA RINSE for 3 seconds to turn on
the Drum Light.
_ ycle Signal
Use this option to turn on or off the signal that sounds
at end of cycle.
To turn off the tones that sound when a setting is
touched: Touch and hold CYCLE SIGNAL for about
3 seconds. Repeat to turn them on.
_ Control Lock
Touch and hold for 3 seconds to lock the controls
to avoid unwanted changes or operation. Touch and hold
3 seconds again to unlock. You may still touch START to
pause the cycle, or touch POWER/CANCEL to turn off
the washer.
OPTIMAL DISPENSE DRAWER
The Optimal Dispense drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach, and
liquid fabric softener to the wash load at the proper time. See
"Using the Dispenser" for information on using the dispenser
drawer.
_ ptimal Dispense Cartridge
Each dispenser cartridge holds up to 18.5 oz. (550 ml) of
liquid HE detergent, enough for up to 36 t loads, depending
on cycle and detergent concentration. The cartridge fits into
compartment (B) of the dispenser drawer for convenient
loading.
[] Change detergent concentration setting
if detergent used is different than factory
preset of 2x concentration. See "About
Detergent ConcentrationS'
[] Change water hardness setting if
desired level is different than factory
preset of Normal.
_ Powdered High Efficiency "H E" detergent compartment
This compartment holds powdered H E detergent
for a single load.
_ Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric softener at
the optimum time in the cycle.
[] Use only liquid fabric softener in this dispenser.
_ iquid chlorine bleach compartment
Automatically dilutes and dispenses liquid chlorine bleach at
the optimum time during the first rinse after the wash cycle.
This compartment cannot dilute powdered bleach.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be marked
"HE" or "High Efficiency_' Low-water washing creates excessive
sudsing with a non-HE detergent. Using non-HE detergent will likely
result in longer cycle times and reduced rinsing performance. It may
also result in component failure and, over time, buildup of mold or
mildew. HE detergents are low-sudsing and quick-dispersing to
produce the right amount of suds for the best performance. They
hold soil in suspension so it is not re-deposited onto clean clothes.
Follow the manufacturer's instructions to determine the amount of
detergent to use.
Use only High Efficiency (HE) detergent.
t The number of loads will vary, depending on detergent concentration, load
size, cycle used, soil level and water hardness. The maximum capacity of up
to 36 loads requires use of 6x concentration detergent.
5
CONTROLPANELAND FEATURES
Cycle Status Lights
The Cycle Status Lights show the progress of
a cycle. At each stage of the process, you may notice
sounds or pauses that are different from traditional
washers.
Low Detergent
This will light if there is enough detergent in the
Optimal Dispense cartridge for only a few more
cycles.
Refill Detergent
This will light if there is no detergent in
the Optimal Dispense cartridge.
Door Locked
Door Locked will light to indicate that the door is locked and
cannot be opened without first pausing or canceling the cycle.
Sensing
When START is touched and held, the washer will first
perform a self-test on the door lock mechanism and the sensing
light will come on. You will hear a dick, the drum will make a
partial turn, and the door will unlock briefly before locking again.
Once the door has locked the second time, the washer will begin
tumbling and adding water. This sensing process will continue
throughout the cycle. You may also hear water flowing through
the dispenser, adding detergent to the load.
After the load size is sensed, the estimated time based on load
size will be displayed. The actual cycle time may be lengthened;
however, the display will continue to show the estimated time.
The sensing light will blink once a second at various times during
the cycle, such as when the washer is reducing extra suds.
Add a Garment
When Add a Garment is lit, you may oause the washer, open
the door, and add items.
Steaming
This will light to show that the cycle is using steam for added
cleaning power.
Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
USINGTHEOPTIMALDISPENSEDRAWER
1. Open the dispenser drawer.
2. Add laundry products as described in steps 4-6 in the "Using
Your Washer" section.
3. Slowly close the dispenser drawer. Make sure it is
completely closed.
NOTES:
[] A small amount of water may remain in the dispensers from
the previous wash cycle. This is normal.
[] See "About Detergent Concentration" for information on
detergent concentration.
[] To ensure you have enough detergent in the dispenser,
the display will show the detergent level (Low or Refill).
Adding HE detergent to dispenser
Optimal Dispense cartridge Adding detergent for a single load
Use only HE High Efficiency liquid detergents,
The dispenser cartridge will hold about 18,5 oz,
(550 ml) of HE liquid detergent, or enough for
up to 36 loads+,
To FIll:
Push back on the tab and lift the fill
door, Fill to the "MAX" line with
HE liquid detergent, Close fill door,
Itwill click into place,
Use only High
Efficiency (HE)
detergent,
To Install the Dispenser Cartridge:
1. Pull out the dispenser drawer,
2. Insert the dispenser cartridge completely in detergent
compartment as shown, it should click intoposition,
3. Slowly slide the dispenser drawer in until it is completely
closed, The washer will automatically detect the dispenser
cartridge,
NOTE:
The dispenser cartridge should be rinsed out when
changing detergents or when the washer will not be used
for extended periods. For instructions on cleaning the
dispenser cartridge, see "Washer MaintenanceS'
* The number of loads will vary, depending on detergent concentration,
load size, cycle used, soil level, and water hardness. The maximum
capacity of up to 36 loads requires use of 6x concentration detergent.
Lift out the cartridge and set aside,
Powdered H E
detergent
compartment
Powdered H E detergent
Place a measured amount of detergent in
the powdered HE detergent compartment.
Use only High Efficiency
(HE) detergent,
Powdered detergent:
Add directly to the
compartment.
IMPCRTANT:
[]
[]
[] Do not use liquid detergents in the single-load
compartment; liquid detergents may seep out of the
detergent compartment before the main wash begins,
[] A single dose of liquid detergent can be added to the
Single-Dose Liquid HE Detergent Cup, which you can
purchase (see "Accessories" section),
Do not add single-dose laundry packet to dispenser
drawer,
If you are using the Delay Hrs, option, use of the
dispenser cartridge is recommended, or powdered
detergent may be used in the HE powdered detergent
compartment.
Liquid H E detergent
If you frequently alternate between two different liquid
HE detergents, you can purchase an additional Optimal
Dispense cartridge,
See "Accessories" for ordering information,
CYCLEGUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best
fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
NOTES:
III Not all cycles and options are available on all models
III All wash temperature selections feature a cold rinse.
III Not all temperatures or spin speeds are labeled on the control panel.
using default
cycle settings: Cycle:
Normally soiled cottons, Normal
linens, sheets, and
mixed garment loads
Bright or darkly colored
cottons, linens, casual
and mixed loads
Lightly soiled shirts,
blouses, trousers, pants
and dresses
Sheer fabrics, lingerie,
sweaters, and lightly
soiled shirts, blouses,
trousers, pants, and
skirts
Normally soiled sheets,
pillowcases, light
blankets, or throws
Cold Wash
Wrinkle
Control
Delicates
Bedding
Wash
Temperature:
Extra Hot
Hot
Warm
Cool
Cold
Cold
Extra Hot
Hot
Warm
Cool
Cold
Extra Hot
Hot
Warm
Cool**
Cold
Extra Hot
Hot
Warm
Cool
Cold
Spin Soil Available
Speed: Level Options: - Cycle Details:
Max Extract TM Extra Heavy Steam for Stains* _ This cycle combines medium-speed
High Med Fresh Hold _ _ tumbling and an extra-high-speed spin.
Med Light Extra Rinse This cycle is designed to provide the
None
i Max Extract TM
High
Med
None
Max Extract TM
High
Med
Low
None
Max Extract TM
High
Med
Low
None
Max Extract TM
High
Med
Low
None
Extra Heavy
Med
Light
Extra Heavy
Med
Light
Extra Heavy
Med
Light
Extra Heavy
Med
Light
Delay Hrs.
Fresh Hold _
Extra Rinse
Delay Hrs.
Steam for Stains*
Fresh Hold _
Extra Rinse
Delay Hrs.
Steam for Stains*
Fresh Hold _
Extra Rinse
Delay Hrs.
Steam for Stains*
Fresh Hold _
Extra Rinse
Delay Hrs.
most energy efficiency.
@
This cycle uses a concentrated
detergent solution along with cold
water throughout the cycle to gently lift
out stains and care for fabrics.
This cycle combines low-speed
tumbling and medium-speed spin
for gentle fabric care and reduced
wrinkling.
This cycle combines low-speed
tumbling and low-speed spin for gentle
fabric care and reduced wrinkling.
The wash action of this cycle isdesigned to keep large items from
tangling and bailing up.
No clothes in washer Clean Use this cycle every 30 washes to
Washer keep the inside of your washer fresh
with and clean. This cycle uses a higher
affresh '_ water level. Use with affresh c_washer
cleaner tablet or liquid chlorine bleach
to thoroughly clean the inside of your
washer. This cycle should not be
interrupted. See "Washer Care?
IMPORTANT: Do not place garments
or other items in the washer during
the Clean Washer affresh cecycle.
Use this cycle with an empty wash
tub. See "Washer Care" in "Washer
Maintenance."
Steam for Stains option is only available when warm, hot or extra hot water temperature is selected.
Load Size Recommendations
For best results, follow the load size recommendations noted for
each cycle.
Small load: Fill the washer drum with 3-4 items, not more
than 1/4 full.
Medium load: Fill the washer drum to about 1/2 full.
up
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes
can tumble freely. For best results, avoid packing tightly.
8
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best
fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
NOTES:
Ill Not all cycles and options are available on all models
Ill All wash temperature selections feature a cold rinse.
Ill Not all temperatures or spin speeds are labeled on the control panel.
cycle settings:
Wet load of clothes
Swimwear, items that
need rinsing
Clothing, bedding
and towels requiring
sanitization
Sturdy garments
and household items
exposed to possible
allergens
2-4 lightly soiled
synthetic garments,
athletic uniforms, or
workout wear
Heavily soiled fabrics
Cycle:
Drain
& Spin
Drain
& Spin
with
Extra Rinse
Sanitize *
Allergen _
Overnight
iWash & Dry
Power
Wash
Temperature: Speed:
N/A Max Extract TM
High
Med
Low
None
Cold Max Extract TM
High
Med
Low
None
Extra Hot Max Extract TM
High
Med
Low
None
Extra Hot Max Extract TM
Hot High
Med
Extra Hot Max Extract TM
Hot
Warm
Cool
Cold
Extra Hot Max Extract TM
Hot High
Warm Med
Cool Low
Cold None
Level:
N/A
Extra Heavy
Med
Light
Extra Heavy
Med
Light
Extra Heavy
Med
Light
Extra Heavy
Med
Light
Extra Heavy
Med
Light
Options: " .... Cycle Details:
Fresh Hold c_ _ Use Drain & Spin to remove excess
Delay Hrs. _ water from the load. Spin speed can
be set to a lower setting.
Fresh Hold c_
Delay Hrs.
Steam for Stains*
Fresh Hold c_
Extra Rinse
Delay Hrs.
Steam for Stains*
Fresh Hold c_
Extra Rinse
Delay Hrs.
Steam for Stains*
Fresh Hold _
Extra Rinse
Delay Hrs.
Steam for Stains*
Fresh Hold c_
Extra Rinse
Delay Hrs.
_ elect Drain & Spin; then select ExtraRinse to add water. The cycle includes
an extra-high-speed spin. For some
fabrics, you may wish to set the spin
speed to a lower setting.
The extra hot wash temperatureensures sanitization. Check
recommended wash temperature
of your items.
Uses more water to flush out allergenssuch as dust mites and pet dander
from normally-soiled items.
O his short wash cycle has an
extra-high-speed spin followed by
intermittent tumbling and fan activation
to circulate air through the clothes.
Use this cycle for extremely soiledgarments and household items that
need additional cleaning power. This
cycle combines high-speed wash
action, medium-speed spin, and a
deep rinse to flush excess dirt from
the load.
Steam for Stains option is only available when warm, hot or extra hot water temperature is selected.
Model: MHW8000A*
t- Sanitize
II This washer has a Sanitize Cycle that is certified by NSF International, an independent, third-party testing and certification
organization. The certification verifies that the Sanitize Cycle eliminates 99.90/0 of bacteria typically found on clothing, bedding,
and towels. There is no carryover of bacteria between loads after the cycle is complete.
II Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-high water temperature to help ensure
the removal of heavy soils and stains. It is recommended that you set your hot water heater to 120°F (49°C) to ensure proper
performance during this cycle.
II Only the Sanitize Cycle selected has been designed to meet the requirements of NSF Protocol P172 Sanitization Performance
of Residential and Commercial, family-sized clothes washer.
_ tf Allergen
Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this
cycle reduced tested allergens by at least 95.00/0 and maintained the water temperature necessary to kill dust mites. Only the allergen cycle
has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness.
9
USINGYOURWASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
First wash cycle without laundry
Before washing clothes for the first time, fill the HE liquid dispenser
cartridge and install in the dispenser drawer. Choose the NORMAL
cycle and run it without clothes. Use only HE detergent. This initial
cycle serves to ensure the interior is dean and the dispenser drawer
is ready for use before washing clothes.
1, Sort and prepare your laundry
Sort items by recommended cycle, water temperature, and
colorfastness. Separate heavily soiled items from lightly soiled.
Separate delicate items from sturdy fabrics. Treat stains promptly
and check for colorfastness by testing stain remover products on
an inside seam.
IMPORTANT:
m Empty pockets. Loose change, buttons, or any small object can
plug pumps and may require a service call.
m Close zippers, fasten hooks, tie strings and sashes, and remove
non-washable trim and ornaments.
m Mend rips and tears to avoid further damage to items during
washing.
m Turn knits inside out to prevent pilling. Separate lint-takers from
lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint
from towels, rugs, and chenille fabrics.
m Do not dry garments if stains remain after washing, because heat
can set stains into fabric.
m Always read and follow fabric care labels and laundry product
instructions. Improper usage may cause damage to your
garments.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2, Add laundry products
Single-dose laundry packet, Oxi-type boosters, color-safe bleach,
or fabric softener crystals can be added to the drum prior to
adding laundry.
NOTE: Do not add clothes to washer drum prior to adding
laundry products. Always follow manufacturer's instructions.
3,Load laundry into washer
Place a load of sorted clothes loosely in the washer. Items need to
move freely for best cleaning and to reduce wrinkling and tangling.
Close the washer door by pushing it firmly until latch clicks.
m Depending on load type and cycle, the washer can be fully
loaded, but not tightly packed. Washer door should close easily.
See "Cycle Guide" for loading suggestions.
m Mix large and small items and avoid washing single items. Load
evenly.
m Wash small items in mesh garment bags. For multiple items, use
more than one bag and fill bags equally.
10
USING LAUNDRY PRODUCT DISPENSERS
NOTE: Do not add single-dose laundry packets, Oxi-type boosters,
color-safe bleach, or fabric softener crystals to dispensers. They will
not dispense correctly.
_4, Add HE detergent
to dispenser (if desired)
Select detergent dispenser, based on type of HE detergent used
(either liquid or powdered). See "Using the Optimal Dispense
Drawer" instructions on how to use the dispenser.
_5, Add fabric softener to
liquid
_ dispenser (if desired)
Pour a measured amount of liquid fabric softener into liquid fabric
Add liquid chlorine bleach to the bleach compartment.
Do not overfill, dilute, or use more than 2/3 cup (165 mL).
Do not use color-safe bleach or Oxi in the same cycle with
liquid chlorine bleach.
[] Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.
[] Do not fill beyond the "MAX" level. Overfilling could cause
garment damage.
7, Touch POWER/CANCEL to turn on
washer
power/cancel
softener compartment. Always follow manufacturer's directions for
correct amount of fabric softener based on your load size.
Fabric softener is always dispensed in the last rinse, even if Extra
Rinse is selected.
IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup
(60 mL) of fabric softener. Do not fill past the MAX line. Overfilling
dispenser will cause fabric softener to immediately dispense into
washer.
[] Do not spill or drip any fabric softener onto the clothes.
[] Do not use liquid fabric softener dispenser balls in this washer.
They will not dispense correctly.
Slowly close the Optimal Dispense drawer. Make sure
the drawer is closed completely, then touch POWER/CANCEL
to turn on the washer or go to Step 8.
11
8, Select CYCLE*
norma|
overnig_
wash & dry
i
allergen
sanitize
_'old
wash
wrinlde
control
delicates
_'edding
dra_n _ean washer
& spin with_d_
Turn cycle knob to select your wash cycle. See "Cycle Guide" for
details on cycle features.
9, Adjust settings, if desired*
extra
I I cold warm hot
temperature _ _ m am m
extra
I ) light reed heavy
SOillevel _ _
max
none reed extract
spin speed m s am ,m =!
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name - Temperature, Soil Level,
or Spin Speed. Adjusting settings will change the Estimated Cycle
Time. Tightly packing the load, unbalanced loads, or excessive suds
may also cause the washer to increase the cycle time.
1 0, Select any additional options*
fresh
s hold
steam
amfor stains
extra
rinse
cycle
signal
contro_
rock
hMd 3 secs
To add an option to the cycle, touch its name - Fresh Hold, Steam
for Stains, Extra Rinse, Cycle Signal, or Control Lock. To remove an
option from the selected cycle, touch the option again.
1 1, Setting detergent concentration and
water hardness
- I+]°oto ,eo
concentration (ax =5x)
water "_ soft normal hard
hardness J _ m
You can adjust the detergent concentration and water
hardness settings, if needed. Default settings are 2x detergent
concentration and normal water hardness. If the detergent
concentration is not listed on the package, see "About
Detergent Concentration" to calculate the concentration.
To Adjust Dispenser Settings:
1. Touch - or + until the desired concentration appears on the
time display.
2. Touch WATER HARDNESS until the desired water hardness
appears on the time display.
12
*Not all options and settings are available with all cycles. See "Cycle Guide"
for available options and settings.
1 2. Setting a delayed wash
I select
detay hrs,
If you do not want to begin a cycle immediately, you may choose
the Delay Hrs. option. This will delay the start of the wash cycle by
up to 12 hours.
To set a delayed wash:
1. Touch SELECT DELAY HRS. to set the desired delay time.
2. Touch and hold START to start the delay countdown. The
countdown stops blinking.
1 3. Touch and hold START to begin
wash cycle
hold to start
Touch and hold START to start the wash cycle. To pause
a cycle in progress, touch START once, then touch and
hold again to continue the cycle. To cancel a cycle, touch
POWER/CANCEL
Once you touch and hold START, you will hear the door lock,
unlock, and lock again. The washer door will remain locked during
the wash cycle.
Unlocking the door to add garments:
ff you need to open the door to add 1 or 2 missed
garments, you may do so while the "Add a
Garment" light is [it.
Touch START once; the door will unlock once the
washer movement has stopped. This may take
several minutes. Then close door and touch and
hold START again to restart the cycle.
hold to start
1 4. Remove garments promptly
after cycle is finished
between the tub and the washer drum.
If you will be unable to remove the load promptly, . fresh [
use the Fresh Hold 1_option. If the Fresh Hold 1_ - had
[
option is selected, the washer will automatically
activate the fan and tumble the load periodically
for up to 12 hours. To turn off the Fresh Hold "j option, touch
POWER/CANCEL To set the washer so that the Fresh Hold 1_
option does not come on for future cycles, touch Fresh Hold.
NOTE:
[] The door will remain locked while the Fresh Hold'_"joption is
active. To cancel the option and unlock the door, touch
POWE R/CAN CEL,
[] A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
[] This washer has a tight seal to avoid water leaks. To avoid odors,
leave the door open to allow the washer to dry between uses.
13
WASHERMAINTENANCE
r
WASHER CARE
Recommendations to Help Keep Your Washer Clean
and Performing at its Best
1. Always use High Efficiency (HE) detergents and folJow the
HE detergent manufacturer's instructions regarding the
amount of HE detergent to use. Never use more than the
recommended amount because that may increase the rate
at which detergent and soiJ residue accumuJate inside your
washer, which in turn may resuJt in undesirable odor,
2. Use warm or hot water washes sometimes (not e×cJusiveJy
cold water washes), because they do a better job of controJJing
the rate at which soiJs and detergent accumulate,
3. AJways Jeave the washer door sJightJy ajar between uses
to help dry out the washer and prevent the buiJdup of
odor-causing residue,
Cleaning Your Front Loading Washer
Read these instructions completeJy before beginning the
routine cleaning processes recommended beJow. This Washer
Maintenance Procedure should be performed, at a minimum,
once per month or every 30 wash cycJes, whichever occurs
sooner, to control the rate at which soils and detergent may
otherwise accumulate in your washer,
Cleaning the Door Seal
1. Open the washer door and remove any clothing or items from
the washer,
2. inspect the gray colored seal between the door opening and
the drum for stained areas or soil buildup, Pull back the seal
to inspect all areas under the seal and to check for foreign
objects,
3. If stained areas or soiJ buiJdup are found, wipe down
these areas of the seal using either of the following
two procedures:
a. affresh _"Grit Grabber TM Cloth Procedure:
i, When the cycle is complete, gently pull back the rubber
door seal and clean the entire surface with the rough
side of the Grit Grabber TM cloth.
b. Dilute Liquid Chlorine Bleach Procedure:
i, Mix a dilute bleach solution, using 3/4 cup (177 mL) of
JiquidchJorine bleach and 1 gallon (3,8 L) of warm tap
water,
ii, Wipe the seal area with the diJutesolution, using
a damp cloth,
iii, Let stand 5 minutes,
iv, Wipe down area thoroughly with a dry cloth and let
washer interior air dry with door open,
IM PC RTANT:
[] Wear rubber gloves when cleaning with bleach,
[] Refer to the bleach manufacturer's instructions for
proper use,
f
WASHER CARE (cont.)
Cleaning the inside of the Washer
This washer has a special cycle that uses higher water volumes
in combination with affresh"" Washer Cleaner or liquid chlorine
bleach to thoroughly clean the inside of the washer, Steam
washer models also utilize steam to enhance cleaning in this
special cycle,
NOTE: Read these instructions completely before beginning the
cleaning process,
Begin procedure
1. affresh _ Washer Cleaner Cycle Procedure
(Recommended for Best Performance):
a. Open the washer door and remove any clothing or items,
b. Add an affresh"" Washer Cleaner tablet to the washer
drum,
c. Do not add the affresh '_ Washer Cleaner tablet to the
dispenser drawer,
d. Do not add any detergent or other chemical to the washer
when following this procedure,
e. Close the washer door.
f. Select the CLEAN WASHER cycle,
g. Touch and hold START to begin the cycle, The Clean
Washer Cycle Operation is described below.
2. Chlorine Bleach Procedure:
a. Open the washer door and remove any clothing
or items,
b. Open the dispenser drawer and add 1 cup (236 mL)
of liquid chlorine bleach to the bleach compartment.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage
over time,
c. Close the washer door and the dispenser drawer,
d. Do not add any detergent or other chemicals to the
washer when following this procedure,
e. Close the washer door,
f. Select the CLEAN WASHER cycle,
g. Touch and hold START to begin the cycle, The Clean
Washer Cycle Operation is described below.
NOTE: For best results, do not interrupt cycle,
Description of Clean Washer Cycle Operation:
1. The Clean Washer cycle will determine whether clothing
or other items are in the washer,
2. If no items are detected in the washer, it will proceed
with the cycle.
a. If any items are detected in the washer, "RL" (remove
Joad) wiJl be displayed. The door wiJJunlock. Open washer
and remove any garments from the washer drum,
b. Touch POWER/CANCEL to clear the "R L" code,
c. Touch and hold START to restart the cycle,
After the cycle is complete, leave the door open slightly to allow
for better ventilation and drying of the washer interior,
14
f
WASHER CARE (cont.)
Cancellation of Clean Washer Cycle Operation:
if the Clean Washer cycle is canceled by the user after it has
been initiated, it may take up to 30 minutes for the washer
to purge any affresh '_Cleaner, chlorine bleach, or other
chemistry from the wash system and to adequately rinse any
remaining chemistry. The washer door will remain locked until
the cancellation process has been completed, This ensures no
cleaning chemistry will be carried over to the next wash cycle
and reduces the potential for damage to subsequent loads of
laundry or to the washer itself,
Clean Washer Cycle Cancellation Procedure:
1. Touch POWER/CANCEL on the washer once,
2. The washer will begin to drain and rinse away the remaining
cleaning chemistry,
3. The cycle will complete the cancellation process in
approximately 30 minutes or less,
4. The washer then can be used to either repeat the Clean
Washer cycle or to wash laundry using one of the regular
wash cycles selected by the user,
Cleaning the Dispensers
After a period of using your washer, you may find some residue
buildup in the washer's dispensers. To remove residue from the
dispensers, remove the drawer and wipe the surfaces with a
damp cloth and towel dry either before or after you run the Clean
Washer cycle, Use an all-purpose surface cleaner, if needed,
IM PORTANT: Dispenser is not dishwasher safe,
Cleaning the Outside of the Washer
Use a soft, damp cloth or sponge to wipe up any spills,
Occasionally wipe the outside of your washer to help keep it
looking new. Use mild soap and water,
IMPORTANT: To avoid damaging the washer's finish, do not use
abrasive products,
f
WASHER CARE (cont.)
Removing the Dispenser:
To remove:
1. Pull dispenser drawer out until it stops,
2. Press down on the release tab and pull straight out to
remove the dispenser,
\
3. Lift off cover panel by
pulling straight up,
To replace:
1. Slide cover panel back
onto posts on dispenser,
2. Align edges of dispenser
with guides in washer,
then slide dispenser
back into slot.
f
O
15
WASHERMAINTENANCE
WASHER CARE (cont.)
Cleaning the Optimal Dispense Cartridge
it is recommended that you rinse out the Optimal Dispense
cartridge when changing detergent types or concentrations,
or when the washer will not be used for an extended period,
1. Pull dispenser out until it stops,
2. Lift out the Optimal Dispense cartridge,
3. Lift cover on cartridge and flush interior thoroughly with warm
water,
4. Allow to air dry or wipe with a clean, soft towel,
IM PORTANT: Cartridge is not dishwasher safe,
NON=USE AN D VACATION CARE
Operate your washer only when you are home, if moving, or
not using your washer for a period of time, follow these steps:
1. Unplug or disconnect power to washer,
2. Turn off water supply to washer to avoid flooding due
to water pressure surges,
3. Clean the dispenser, See "Cleaning the Dispenser,"
WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze, Because some water may stay in
hoses, freezing can damage washer, if storing or moving
during freezing weather, winterize your washer,
To winterize washer:
1. Shut off both water faucets, disconnect and drain water
inlet hoses,
2. Put 1 qt. (1 L) of R.V.-type antifreeze in washer drum and
run washer on NORMAL cycle for about 2 minutes to mix
antifreeze and remaining water,
3. Unplug washer or disconnect power,
iMPORTANT: To reduce risk of hose failure, replace inlet
hoses every five years and periodically inspect for kinks, cuts,
wear or water leaks,
HELPFUL TiP: VVhen replacing your inlet hoses, mark
replacement date on label with a permanent marker,
TRANSPORTING YOUR WASHER
1. Shut off both water faucets, Disconnect and drain water
inlet hoses,
2. If washer will be moved during freezing weather, follow
Wl NTER STORAG E CARE directions before moving.
3. Disconnect drain hose from drain system and from back
of washer,
4. Unplug power cord,
5. Place inlet hoses and drain hose inside washer drum,
6. Bundle power cord with a rubber band or cable tie to keep
it from hanging onto the ground,
IMPORTANT: Call for service to install new transport bolts,
Do not reuse transport bolts. Washer must be transported
in the upright position, To avoid structural damage to your
washer, it must be properly set up for relocation by a certified
technician,
16
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage, or
moving:
1. Refer to installation instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to foflow these instructions can result in death,
fire, or electrical shock.
ABOUT DETERGENTCONCENTRATION
Today's liquid HE detergents are concentrated. Most brands of
concentrated HE detergent will show the level of concentration on
the bottle, if so, simply set the concentration level in the Optimal
Dispense menu to match the level shown on the bottle.
However, if the detergent bottle does not give the concentration, it
can be easily calculated. Just divide the package size in fluid ounces
by the number of loads. Then refer to the chart below to find the
concentration.
if you do not get your desired cleaning results, try using a lower
concentration number, if you have excess suds, try using a higher
concentration number.
Concentration Number of ounces + number of loads
2X 1.5-2.49
3X 0.9-1.49
4X 0.7-0.89
5X 0.5-0.69
6X 0.3-0.49
2=
3.
Plug in washer or reconnect power.
Run washer through NORMAL cycle to clean washer and
remove antifreeze, if used. Use only HE detergent. Use half
the manufacturer's recommended amount for a medium-size
load,
17
TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.maytag.com/product_help -
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
if you experience _ Possible Causes Solution
Once any possible issues are corrected, touch POWER/CANCEL once to clear the code. Reselect and restart the cycle.
Sud (Excess suds)
appears in display
dEt (Detergent)
appears in display
Fn8 followed by En/
(water supply error)
appears in display
F09 followed by En_
(drain pump system
error) appears in display
F05 followed by En2
(door will not lock)
appears in display
Cf"/'_
Ju t followed by En/
(motor drive error)
appears in display
",PL" (remove load)
appears in display
The three detergent level
status lights are lit
Washer making error
beeps
Washer beeps when
START is touched
F## E## code other
than as described above
appears in display
Int (interrupted)
appears in display
k.
Excessive suds in washer. Washer is
running a suds reduction routine.
The dispenser cartridge is not
detected.
Check for proper water supply.
Check plumbing for correct drain hose
installation. Drain hose extends into
standpipe farther than 41/2'' (114 mm).
Not using HE detergent or using too
much HE detergent.
Washer door not locking.
Motor is having difficulty turning the
washer drum.
Load detected in drum during Clean
Washer with affresh _-_cycle.
Detergent dispenser is not securely in
place.
Detergent Level sensor error.
Door has not been opened and closed
for at least 3 cycles.
Door not closed.
System error code.
The cycle was paused or cancelled.
Allow the washer to continue. Use only HE detergent.
Always measure detergent, and base detergent quantity on
load size. Follow detergent manufacturer's instructions.
Touch WATER HARDNESS to change water hardness to "soft_'
Ensure the dispenser cartridge is inserted correctly and the
dispenser drawer is shut completely. For single-load doses of
detergent, ignore this message.
Both hoses must be attached and have water flowing to the inlet
valve.
Both hot and cold water faucets must be on.
inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
Touch POWER/CANCEL once to clear the code. Then touch POWER/
CANCEL again to restart washer. If code appears again, call for service.
Check drain hose for proper installation.
Make sure the drain hose is not kinked, pinched, or blocked.
Remove any clogs from drain hose.
Use drain hose form and securely attach to drainpipe or tub.
Lower drain hose if the end is higher than 96" (2.4 m) above
the floor.
Use only HE detergent. Always measure detergent and follow
manufacturer's directions based on load size and soil level.
Touch POWER/CANCEL to cancel the cycle. Make sure the door is
closed completely and latching. Check for items in the washer drum
that may be keeping the door from closing completely.
Washer is tightly packed. Remove some items. See "Cycle Guide"
for load size recommendations. Make sure that all shipping
materials have been removed. See the Installation Instructions.
Remove items from washer drum and restart Clean Washer with
affresh "j cycle.
Pull out the dispenser and slide it back in place.
Touch POWER/CANCEL to reset system. If this fails, unplug
washer or disconnect power for one minute, then plug in washer or
reconnect power.
This code may appear when the washer is first turned on.
Open and close the door to clear the display.
Close the door completely.
Touch POWER/CANCEL once to clear the code. Then touch
POWER/CANCEL again to restart washer. If code appears again,
call for service.
The washer can take 20 to 30 minutes to stop spinning
and drain and will display this error code during that time.
Touch POWER/CANCEL once to clear the code. Then touch
POWER/CANCEL again to restart washer.
J
18
TROUBLESHOOTING
F
First try the solutions suggested here or visit our website at www.maytag.com/product_help -
in Canada www.maytag.ca for assistance and to possibly avoid a service call.
if you experience j
Possible Causes
Solution
Vibration, rocking, or Feet may not be in contact with the Front and rear feet must be in firm contact with floor, and washer
"walking" floor and locked, must be level to operate properly. Jam nuts must be tight against the
bottom of the cabinet.
Washer may not be level. Check floor for flexing or sagging, if flooring is uneven, a 3/4"
(19 mm) piece of plywood under your washer will reduce sound.
Load could be unbalanced
or too large,
The shipping bolts are still in the back
of the washer.
See "Level the Washer" in Installation instructions.
Avoid tightly packing the load. Avoid washing single items. Balance
a single item such as a rug or jeans jacket with a few extra items.
Item or load not suitable for selected cycle. See "Cycle Guide" and
"Using Your Washer"
See "Remove transport bolts from washer" in the installation
Instructions.
Clicking or metallic noises
Gurgling or humming
Door locking or unlocking.
Objects caught in washer drain system.
Washer may be draining water.
The door will lock, unlock, and lock again. You will hear three clicks
after touching and holding START. This is normal.
Empty pockets before washing. Loose items such as coins
could fall between washer drum and tub or may block pump.
it may be necessary to call for service to remove items.
it is normal to hear metal items on clothing such as metal snaps,
buckles, or zippers touch against the stainless steel washer drum.
The pump may make a humming sound with periodic gurgling
or surging as final amounts of water are removed during the spin/
drain cycles. This is normal at certain stages of the cycle.
Rolling or sloshing Steel balls in the balancing system are This is normal at certain stages of the cycle.
and occasional clicking balancing the load.
(on low-speed spin)
Check the following for
proper installation:
Fill hoses not attached tightly.
Fill-hose washers.
Drain hose connection.
Check household plumbing for leaks or
clogged sink or drain.
Not using HE detergent or using too
much HE detergent.
Residue on door glass.
Door opened during "Add a Garment_'
Water or suds leaking from
door or rear of cabinet
Load not completely Water level not visible on door or
covered in water does not cover clothes.
k.
Tighten fill-hose connection.
Properly seat all four fill-hose fiat washers.
Check that the drain hose is properly secured to drainpipe or
laundry tub.
Water can back up out of a clogged sink or drainpipe. Check
all household plumbing for leaks (laundry tubs, drain pipe, water
pipes, and faucets.)
Only use HE detergent. Suds from regular detergents can
cause leaking from the door or rear of cabinet. Always measure
detergent and follow manufacturer's directions based on your load
requirements.
Periodically clean the underside of the glass window to avoid
potential leaks.
Water can drip off the inside of the door when the door is opened
after the start of a cycle.
This is normal for an HE front load washer. The washer senses load
sizes and adds the correct amount of water for optimal cleaning.
J
19
TROUBLESHOOTING
EJectrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
_lf you experience
Washer won't run or fill,
washer stops working
k.
First try the solutions suggested here or visit our website at www.maytag.com/product_help -
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
Possible Causes
Check for proper water supply.
Check proper electrical supply.
Normal washer operation.
The washer door is not firmly shut.
Washer not loaded as recommended.
Solution
Both hoses must be attached and have water flowing to inlet valve.
Both hot and cold water faucets must be turned on.
Check that inlet valve screens have not become clogged.
Check for any kinks in inlet hoses, which can restrict water flow.
Plug power cord into a grounded 3-prong outlet.
Do not use an extension cord.
Ensure there is power to outlet.
Check electrical source or call an electrician to check if voltage
is low.
Reset a tripped circuit breaker. Replace any blown fuses.
NOTE: if problems continue, contact an electrician.
Door must be completely closed and latched for washer to run.
Washer will pause during certain phases of cycle. Do not interrupt
cycle.
The washer pauses for about 2 minutes during certain cycles.
Allow the cycle to continue. Some cycles feature periods of
tumbling and soak.
Washer may be stopped to reduce suds.
Cold Wash uses less water in the beginning of the cycle to
provide a high concentration of detergent for optimal cleaning
action. Following this concentrated tumbling, more water is used
to complete the wash.
The door must be closed during operation.
Remove several items, rearrange load evenly in washer drum.
Close door and touch and hold START.
Do not add more than 1 or 2 additional items after cycle has started
to avoid tightly packing or unbalancing.
Do not add more water to the washer.
J
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Maytag MHW8000A Series Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues