Maytag MHW8000AG0 Manuel utilisateur

Marque: Maytag

Modèle: MHW8000AG0

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

Guide

isation d'entretien

FRONT-LOADINGAUTOMATICWASHER

LAVEUSEAUTOlViATIQUEA CHARGEiVlENTFRONTAL

Para obtener acceso

al Manual de uso y cuidado

en espaSol, o para obtener

informaci6n adicional acerca

de su producto, visite:

www.maytag.com

Wl 0441101A

Wl 0441102A - SP

If you have any problems or questions, visit us at www.maytag.com

Pour tout probleme ou question, consulter www.maytag.ca

Designed to use only HE

High Efficiency detergents.

Conque pour I'utilisation

d'un detergent haute

efficacite seulement.

Certified to Sanitize and to Reduce Allergens

Homologue pour assainir et pour reduire la

presence d'allergenes

TABLEOFCONTENTS

WASHER SAFETY..................................................................................2

ACCESSORIES.......................................................................................3

CONTROL PANELAND FEATURES.................................................4

USING THE OPTIMALDISPENSEDRAWER................................7

CYCLEGUIDE..........................................................................................8

USING YOUR WASHER....................................................................10

WASHER MAINTENANCE................................................................14

ABOUT DETERGENTCONCENTRATION...................................17

TROUBLESHOOTING........................................................................18

WARRANTY...........................................................................................25

ASSISTANCEOR SERVICE............................................. Back Cover

TABLEDES iVlATIERES

SECURITEDE LALAVEUSE.............................................................26

ACCESSOIRES....................................................................................27

TABLEAUDECOMMANDE ETCARACTERISTIQUES............28

UTILISATIONDU TIROIROPTIMALDISPENSE.........................31

GUIDE DE PROGRAMMES.............................................................32

UTILISATIONDE LA LAVEUSE........................................................34

ENTRETIENDELA LAVEUSE..........................................................38

/_,PROPOS DELA CONCENTRATIONDU DETERGENT......41

DEPANNAGE.........................................................................................42

GARANTIE..............................................................................................51

ASSISTANCEOU SERVICE................................. Couverturearriere

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or

"WARNING." These words mean:

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will teii you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS iS

EXPLOSIVE. if the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[]

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" located in the installation

instructions for grounding instructions.

this time.

SAVE THESE iNSTRUCTiONS

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

ACCESSORIES

Customize your new washer and dryer with the following

genuine Maytag accessories. For more information on options and

ordering, contact your dealer, call us at 1-800-901-2042, or visit:

www.maytag.com/accessories.

In Canada, call 1-800-807-6777, or visit: www.maytag.ca.

15" Pedestal

Color-matched pedestals raise the washer

and dryer to a more comfortable working

height. The large drawer provides convenient

storage.

Worksurface

The worksurface bridges the

washer and dryer, and provides

a convenient working and storage

area.

Stack Kit

Ifspace is at a premium, the stack kit

allows the dryer to be installed on top

of the washer.

Optimal Dispense Liquid HE

Detergent Cartridge

Ifyou frequently alternate between two

different liquid HE detergents, you may

also purchase an additional cartridge.

Single-Dose Liquid

HE Detergent Cup

The cup provides a way to dispense

a single close of liquid detergent.

CONTROLPANELAND FEATURES

Not all features and cycles are available on all models.

Model M HW8000A*

NOTE: The control panel features a sensitive surface that responds to a

light touch of your finger. To ensure your selections are registered, touch

the control panel with your finger tip, not your fingernail. When selecting a

setting or option, simply touch its name.

_ Optimal Dispense liquid HE detergent

cartridge

_ Powdered HE detergent compartment

_ Liquid fabric softener

_ Chlorine bleach

POWER/CANCEL

Touch to turn the washer on and off. Touch to stop/cancel

a cycle at any time.

WASH CYCLE KNOB

Use your Wash Cycle knob to select available cycles on your

washer. Turn the knob to select a cycle for your laundry load.

See "Cycle Guide" for detailed descriptions of cycles.

NOTE: For best results when using the Overnight Wash & Dry

cycle, use for loads weighing 2.5 pounds and less, such as a

soccer uniform or a running tank and shorts.

START

Touch and hold until the light above START comes on to start

a cycle, or touch once while a cycle is in process to pause it.

If you want to add a garment, you can touch START when the

"Add a Garment" LED is on.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and

the Estimated Cycle Time will be displayed. Factors such as

load size, wash temperature, and water pressure may affect the

time shown in the display. Tightly packing garments, unbalanced

loads, or excessive suds may cause the washer to lengthen the

cycle time, as wee

Touch the desired option along the bottom of the display to

adjust settings. See "Cycle Guide" for available settings on

each cycle. Not all settings are available with all cycles.

Temperature

The recommended wash temperature is preset for each cycle.

You may also select a wash temperature based on the type of

fabric and soils being washed. For best results, use the warmest

wash water safe for your fabric, following the garment label

instructions. All wash temperatures feature a cold rinse.

Soil Level

Soil Level (wash time) is preset for each wash cycle. When you

change the soil setting, the cycle time will increase or decrease in

the Estimated Cycle Time display.

For most loads, use the soil level that is preset with the cycle

you have chosen. For heavily soiled and sturdy fabrics, use the

Soil Level setting to select more wash time. For lightly soiled and

delicate fabrics, use the Soil Level setting to select less wash

time. Lower soil level settings will help reduce tangling and

wrinkling.

Spin Speed

This washer automatically selects the spin speed based

on the cycle selected. Some preset speeds can be changed.

[] Higher spin speeds mean shorter dry times, but may

increase wrinkling in your load.

[] Lower spin speeds reduce wrinkling, but will leave your load

more damp.

OPTIMAL DISPENSE - DETERGENT

CONCENTRATION AND WATER HARDNESS

Touch - or + to set detergent concentration from 2x to 8x. Touch

WATER HARDNESS to set water hardness level (normal, hard,

or soft). (See "About Detergent Concentration" section.)

IM PORTANT: When using the dispenser cartridge with

concentrated liquid detergent, be sure to change the detergent

concentration settings in the control if the detergent used is

different than factory preset of 2x concentration.

O Cycle Status Lights

For details, see "Cycle Status Lights".

OPTIONS

Touch to activate additional wash options or additional features

on the washer. Not all options are available on all models.

_ elect Delay Hrs.

Touch this option to delay the start of the wash cycle by up

to 12 hours.

_ resh Hold _ Option

The Fresh Hold R'option will periodically tumble the load

after the end of the cycle for up to 12 hours while the

integrated fan circulates air through the washer to reduce

humidity. To turn on the Fresh Hold:" option, touch Fresh

Hold. If, however, the Fresh Hold:" option is turned on, it

will stay on for all future cycles until turned back off - the

washer remembers the last on/off status set. To turn off

the Fresh Hold ° option, touch Fresh Hold.

You may also activate the Fresh Hold ° option without

running a cycle by touching and holding POWER/

CANCEL for one second, then touching and holding

Fresh Hold" option for 3 seconds, then touching and

holding START for 3 seconds.

To turn off the Fresh Hold ° option when it is running, touch

POWE R/CAN CE L.

NOTE: The door will lock while the Fresh Hold _ option

is active. To cancel the option and unlock the door, touch

POWE R/CAN CE L.

_ team for Stains

The Steam for Stains option adds additional soak and wash

time to many cycles to help remove tough stains, as well

as a steam boost for added cleaning power. An integrated

heater helps to maintain optimal wash temperatures. See

the "Cycle Guide" for cycles that allow the Steam for Stains

option.

_ xtra Rinse

Activate this option to add an extra rinse to most cycles.

NOTE: Some cycles include this feature as a default.

See "Cycle Guide" for details.

Drum Light

Touch and hold EXTRA RINSE for 3 seconds to turn on

the Drum Light.

_ ycle Signal

Use this option to turn on or off the signal that sounds

at end of cycle.

To turn off the tones that sound when a setting is

touched: Touch and hold CYCLE SIGNAL for about

3 seconds. Repeat to turn them on.

_ Control Lock

Touch and hold for 3 seconds to lock the controls

to avoid unwanted changes or operation. Touch and hold

3 seconds again to unlock. You may still touch START to

pause the cycle, or touch POWER/CANCEL to turn off

the washer.

OPTIMAL DISPENSE DRAWER

The Optimal Dispense drawer gives you the convenience of

automatically adding HE detergent, liquid chlorine bleach, and

liquid fabric softener to the wash load at the proper time. See

"Using the Dispenser" for information on using the dispenser

drawer.

_ ptimal Dispense Cartridge

Each dispenser cartridge holds up to 18.5 oz. (550 ml) of

liquid HE detergent, enough for up to 36 t loads, depending

on cycle and detergent concentration. The cartridge fits into

compartment (B) of the dispenser drawer for convenient

[] Change detergent concentration setting

if detergent used is different than factory

preset of 2x concentration. See "About

Detergent ConcentrationS'

[] Change water hardness setting if

desired level is different than factory

preset of Normal.

_ Powdered High Efficiency "H E" detergent compartment

This compartment holds powdered H E detergent

for a single load.

_ Liquid fabric softener compartment

Automatically dilutes and dispenses liquid fabric softener at

the optimum time in the cycle.

[] Use only liquid fabric softener in this dispenser.

_ iquid chlorine bleach compartment

Automatically dilutes and dispenses liquid chlorine bleach at

the optimum time during the first rinse after the wash cycle.

This compartment cannot dilute powdered bleach.

Choosing the Right Detergent

Use only High Efficiency detergents. The package will be marked

"HE" or "High Efficiency_' Low-water washing creates excessive

sudsing with a non-HE detergent. Using non-HE detergent will likely

result in longer cycle times and reduced rinsing performance. It may

also result in component failure and, over time, buildup of mold or

mildew. HE detergents are low-sudsing and quick-dispersing to

produce the right amount of suds for the best performance. They

hold soil in suspension so it is not re-deposited onto clean clothes.

Follow the manufacturer's instructions to determine the amount of

detergent to use.

Use only High Efficiency (HE) detergent.

t The number of loads will vary, depending on detergent concentration, load

size, cycle used, soil level and water hardness. The maximum capacity of up

to 36 loads requires use of 6x concentration detergent.

CONTROLPANELAND FEATURES

Cycle Status Lights

The Cycle Status Lights show the progress of

a cycle. At each stage of the process, you may notice

sounds or pauses that are different from traditional

washers.

Low Detergent

This will light if there is enough detergent in the

Optimal Dispense cartridge for only a few more

cycles.

Refill Detergent

This will light if there is no detergent in

the Optimal Dispense cartridge.

Door Locked

Door Locked will light to indicate that the door is locked and

cannot be opened without first pausing or canceling the cycle.

Sensing

When START is touched and held, the washer will first

perform a self-test on the door lock mechanism and the sensing

light will come on. You will hear a dick, the drum will make a

partial turn, and the door will unlock briefly before locking again.

Once the door has locked the second time, the washer will begin

tumbling and adding water. This sensing process will continue

throughout the cycle. You may also hear water flowing through

the dispenser, adding detergent to the load.

After the load size is sensed, the estimated time based on load

size will be displayed. The actual cycle time may be lengthened;

however, the display will continue to show the estimated time.

The sensing light will blink once a second at various times during

the cycle, such as when the washer is reducing extra suds.

Add a Garment

When Add a Garment is lit, you may oause the washer, open

the door, and add items.

Steaming

This will light to show that the cycle is using steam for added

cleaning power.

Done

Once the cycle is complete, this light will come on.

Remove the load promptly for best results.

USINGTHEOPTIMALDISPENSEDRAWER

1. Open the dispenser drawer.

2. Add laundry products as described in steps 4-6 in the "Using

Your Washer" section.

3. Slowly close the dispenser drawer. Make sure it is

completely closed.

NOTES:

[] A small amount of water may remain in the dispensers from

the previous wash cycle. This is normal.

[] See "About Detergent Concentration" for information on

detergent concentration.

[] To ensure you have enough detergent in the dispenser,

the display will show the detergent level (Low or Refill).

Adding HE detergent to dispenser

Optimal Dispense cartridge Adding detergent for a single load

Use only HE High Efficiency liquid detergents,

The dispenser cartridge will hold about 18,5 oz,

(550 ml) of HE liquid detergent, or enough for

up to 36 loads+,

To FIll:

Push back on the tab and lift the fill

door, Fill to the "MAX" line with

HE liquid detergent, Close fill door,

Itwill click into place,

Use only High

Efficiency (HE)

detergent,

To Install the Dispenser Cartridge:

1. Pull out the dispenser drawer,

2. Insert the dispenser cartridge completely in detergent

compartment as shown, it should click intoposition,

3. Slowly slide the dispenser drawer in until it is completely

closed, The washer will automatically detect the dispenser

cartridge,

NOTE:

The dispenser cartridge should be rinsed out when

changing detergents or when the washer will not be used

for extended periods. For instructions on cleaning the

dispenser cartridge, see "Washer MaintenanceS'

* The number of loads will vary, depending on detergent concentration,

load size, cycle used, soil level, and water hardness. The maximum

capacity of up to 36 loads requires use of 6x concentration detergent.

Lift out the cartridge and set aside,

Powdered H E

detergent

compartment

Powdered H E detergent

Place a measured amount of detergent in

the powdered HE detergent compartment.

Use only High Efficiency

(HE) detergent,

Powdered detergent:

Add directly to the

compartment.

IMPCRTANT:

[]

[] Do not use liquid detergents in the single-load

compartment; liquid detergents may seep out of the

detergent compartment before the main wash begins,

[] A single dose of liquid detergent can be added to the

Single-Dose Liquid HE Detergent Cup, which you can

purchase (see "Accessories" section),

Do not add single-dose laundry packet to dispenser

drawer,

If you are using the Delay Hrs, option, use of the

dispenser cartridge is recommended, or powdered

detergent may be used in the HE powdered detergent

compartment.

Liquid H E detergent

If you frequently alternate between two different liquid

HE detergents, you can purchase an additional Optimal

Dispense cartridge,

See "Accessories" for ordering information,

CYCLEGUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best

fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES:

III Not all cycles and options are available on all models

III All wash temperature selections feature a cold rinse.

III Not all temperatures or spin speeds are labeled on the control panel.

using default

cycle settings: Cycle:

Normally soiled cottons, Normal

linens, sheets, and

mixed garment loads

Bright or darkly colored

cottons, linens, casual

and mixed loads

Lightly soiled shirts,

blouses, trousers, pants

and dresses

Sheer fabrics, lingerie,

sweaters, and lightly

soiled shirts, blouses,

trousers, pants, and

skirts

Normally soiled sheets,

pillowcases, light

blankets, or throws

Cold Wash

Wrinkle

Control

Delicates

Bedding

Wash

Temperature:

Extra Hot

Hot

Warm

Cool

Cold

Extra Hot

Hot

Warm

Cool

Cold

Extra Hot

Hot

Warm

Cool**

Cold

Extra Hot

Hot

Warm

Cool

Cold

Spin Soil Available

Speed: Level Options: - Cycle Details:

Max Extract TM Extra Heavy Steam for Stains* _ This cycle combines medium-speed

High Med Fresh Hold _ _ tumbling and an extra-high-speed spin.

Med Light Extra Rinse This cycle is designed to provide the

None

i Max Extract TM

High

Med

None

Max Extract TM

High

Med

Low

None

Max Extract TM

High

Med

Low

None

Max Extract TM

High

Med

Low

None

Extra Heavy

Med

Light

Extra Heavy

Med

Light

Extra Heavy

Med

Light

Extra Heavy

Med

Light

Delay Hrs.

Fresh Hold _

Extra Rinse

Delay Hrs.

Steam for Stains*

Fresh Hold _

Extra Rinse

Delay Hrs.

Steam for Stains*

Fresh Hold _

Extra Rinse

Delay Hrs.

Steam for Stains*

Fresh Hold _

Extra Rinse

Delay Hrs.

most energy efficiency.

This cycle uses a concentrated

detergent solution along with cold

water throughout the cycle to gently lift

out stains and care for fabrics.

This cycle combines low-speed

tumbling and medium-speed spin

for gentle fabric care and reduced

wrinkling.

This cycle combines low-speed

tumbling and low-speed spin for gentle

fabric care and reduced wrinkling.

The wash action of this cycle isdesigned to keep large items from

tangling and bailing up.

No clothes in washer Clean Use this cycle every 30 washes to

Washer keep the inside of your washer fresh

with and clean. This cycle uses a higher

affresh '_ water level. Use with affresh c_washer

cleaner tablet or liquid chlorine bleach

to thoroughly clean the inside of your

washer. This cycle should not be

interrupted. See "Washer Care?

IMPORTANT: Do not place garments

or other items in the washer during

the Clean Washer affresh cecycle.

Use this cycle with an empty wash

tub. See "Washer Care" in "Washer

Maintenance."

Steam for Stains option is only available when warm, hot or extra hot water temperature is selected.

Load Size Recommendations

For best results, follow the load size recommendations noted for

each cycle.

Small load: Fill the washer drum with 3-4 items, not more

than 1/4 full.

Medium load: Fill the washer drum to about 1/2 full.

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes

can tumble freely. For best results, avoid packing tightly.

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best

fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES:

Ill Not all cycles and options are available on all models

Ill All wash temperature selections feature a cold rinse.

Ill Not all temperatures or spin speeds are labeled on the control panel.

cycle settings:

Wet load of clothes

Swimwear, items that

need rinsing

Clothing, bedding

and towels requiring

sanitization

Sturdy garments

and household items

exposed to possible

allergens

2-4 lightly soiled

synthetic garments,

athletic uniforms, or

workout wear

Heavily soiled fabrics

Cycle:

Drain

& Spin

Drain

& Spin

with

Extra Rinse

Sanitize *

Allergen _

Overnight

iWash & Dry

Power

Wash

Temperature: Speed:

N/A Max Extract TM

High

Med

Low

None

Cold Max Extract TM

High

Med

Low

None

Extra Hot Max Extract TM

High

Med

Low

None

Extra Hot Max Extract TM

Hot High

Med

Extra Hot Max Extract TM

Hot

Warm

Cool

Cold

Extra Hot Max Extract TM

Hot High

Warm Med

Cool Low

Cold None

Level:

N/A

Extra Heavy

Med

Light

Extra Heavy

Med

Light

Extra Heavy

Med

Light

Extra Heavy

Med

Light

Extra Heavy

Med

Light

Options: " .... Cycle Details:

Fresh Hold c_ _ Use Drain & Spin to remove excess

Delay Hrs. _ water from the load. Spin speed can

be set to a lower setting.

Fresh Hold c_

Delay Hrs.

Steam for Stains*

Fresh Hold c_

Extra Rinse

Delay Hrs.

Steam for Stains*

Fresh Hold c_

Extra Rinse

Delay Hrs.

Steam for Stains*

Fresh Hold _

Extra Rinse

Delay Hrs.

Steam for Stains*

Fresh Hold c_

Extra Rinse

Delay Hrs.

_ elect Drain & Spin; then select ExtraRinse to add water. The cycle includes

an extra-high-speed spin. For some

fabrics, you may wish to set the spin

speed to a lower setting.

The extra hot wash temperatureensures sanitization. Check

recommended wash temperature

of your items.

Uses more water to flush out allergenssuch as dust mites and pet dander

from normally-soiled items.

O his short wash cycle has an

extra-high-speed spin followed by

intermittent tumbling and fan activation

to circulate air through the clothes.

Use this cycle for extremely soiledgarments and household items that

need additional cleaning power. This

cycle combines high-speed wash

action, medium-speed spin, and a

deep rinse to flush excess dirt from

the load.

Steam for Stains option is only available when warm, hot or extra hot water temperature is selected.

Model: MHW8000A*

t- Sanitize

II This washer has a Sanitize Cycle that is certified by NSF International, an independent, third-party testing and certification

organization. The certification verifies that the Sanitize Cycle eliminates 99.90/0 of bacteria typically found on clothing, bedding,

and towels. There is no carryover of bacteria between loads after the cycle is complete.

II Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-high water temperature to help ensure

the removal of heavy soils and stains. It is recommended that you set your hot water heater to 120°F (49°C) to ensure proper

performance during this cycle.

II Only the Sanitize Cycle selected has been designed to meet the requirements of NSF Protocol P172 Sanitization Performance

of Residential and Commercial, family-sized clothes washer.

_ tf Allergen

Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this

cycle reduced tested allergens by at least 95.00/0 and maintained the water temperature necessary to kill dust mites. Only the allergen cycle

has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness.

USINGYOURWASHER

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

First wash cycle without laundry

Before washing clothes for the first time, fill the HE liquid dispenser

cartridge and install in the dispenser drawer. Choose the NORMAL

cycle and run it without clothes. Use only HE detergent. This initial

cycle serves to ensure the interior is dean and the dispenser drawer

is ready for use before washing clothes.

1, Sort and prepare your laundry

Sort items by recommended cycle, water temperature, and

colorfastness. Separate heavily soiled items from lightly soiled.

Separate delicate items from sturdy fabrics. Treat stains promptly

and check for colorfastness by testing stain remover products on

an inside seam.

IMPORTANT:

m Empty pockets. Loose change, buttons, or any small object can

plug pumps and may require a service call.

m Close zippers, fasten hooks, tie strings and sashes, and remove

non-washable trim and ornaments.

m Mend rips and tears to avoid further damage to items during

washing.

m Turn knits inside out to prevent pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint

from towels, rugs, and chenille fabrics.

m Do not dry garments if stains remain after washing, because heat

can set stains into fabric.

m Always read and follow fabric care labels and laundry product

instructions. Improper usage may cause damage to your

garments.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2, Add laundry products

Single-dose laundry packet, Oxi-type boosters, color-safe bleach,

or fabric softener crystals can be added to the drum prior to

adding laundry.

NOTE: Do not add clothes to washer drum prior to adding

laundry products. Always follow manufacturer's instructions.

3,Load laundry into washer

Place a load of sorted clothes loosely in the washer. Items need to

move freely for best cleaning and to reduce wrinkling and tangling.

Close the washer door by pushing it firmly until latch clicks.

m Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close easily.

See "Cycle Guide" for loading suggestions.

m Mix large and small items and avoid washing single items. Load

evenly.

m Wash small items in mesh garment bags. For multiple items, use

more than one bag and fill bags equally.

USING LAUNDRY PRODUCT DISPENSERS

NOTE: Do not add single-dose laundry packets, Oxi-type boosters,

color-safe bleach, or fabric softener crystals to dispensers. They will

not dispense correctly.

_4, Add HE detergent

to dispenser (if desired)

Select detergent dispenser, based on type of HE detergent used

(either liquid or powdered). See "Using the Optimal Dispense

Drawer" instructions on how to use the dispenser.

_5, Add fabric softener to

liquid

_ dispenser (if desired)

Pour a measured amount of liquid fabric softener into liquid fabric

Add liquid chlorine bleach to the bleach compartment.

Do not overfill, dilute, or use more than 2/3 cup (165 mL).

Do not use color-safe bleach or Oxi in the same cycle with

liquid chlorine bleach.

[] Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

[] Do not fill beyond the "MAX" level. Overfilling could cause

garment damage.

7, Touch POWER/CANCEL to turn on

washer

power/cancel

softener compartment. Always follow manufacturer's directions for

correct amount of fabric softener based on your load size.

Fabric softener is always dispensed in the last rinse, even if Extra

Rinse is selected.

IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup

(60 mL) of fabric softener. Do not fill past the MAX line. Overfilling

dispenser will cause fabric softener to immediately dispense into

washer.

[] Do not spill or drip any fabric softener onto the clothes.

[] Do not use liquid fabric softener dispenser balls in this washer.

They will not dispense correctly.

Slowly close the Optimal Dispense drawer. Make sure

the drawer is closed completely, then touch POWER/CANCEL

to turn on the washer or go to Step 8.

8, Select CYCLE*

norma|

overnig_

wash & dry

allergen

sanitize

_'old

wash

wrinlde

control

delicates

_'edding

dra_n _ean washer

& spin with_d_

Turn cycle knob to select your wash cycle. See "Cycle Guide" for

details on cycle features.

9, Adjust settings, if desired*

extra

I I cold warm hot

temperature _ _ m am m

extra

I ) light reed heavy

SOillevel _ _

max

none reed extract

spin speed m s am ,m =!

The display will show the default settings for the selected

cycle. To adjust a setting, touch its name - Temperature, Soil Level,

or Spin Speed. Adjusting settings will change the Estimated Cycle

Time. Tightly packing the load, unbalanced loads, or excessive suds

may also cause the washer to increase the cycle time.

1 0, Select any additional options*

fresh

s hold

steam

amfor stains

extra

rinse

cycle

signal

contro_

rock

hMd 3 secs

To add an option to the cycle, touch its name - Fresh Hold, Steam

for Stains, Extra Rinse, Cycle Signal, or Control Lock. To remove an

option from the selected cycle, touch the option again.

1 1, Setting detergent concentration and

water hardness

- I+]°oto ,eo

concentration (ax =5x)

water "_ soft normal hard

hardness J _ m

You can adjust the detergent concentration and water

hardness settings, if needed. Default settings are 2x detergent

concentration and normal water hardness. If the detergent

concentration is not listed on the package, see "About

Detergent Concentration" to calculate the concentration.

To Adjust Dispenser Settings:

1. Touch - or + until the desired concentration appears on the

time display.

2. Touch WATER HARDNESS until the desired water hardness

appears on the time display.

*Not all options and settings are available with all cycles. See "Cycle Guide"

for available options and settings.

1 2. Setting a delayed wash

I select

detay hrs,

If you do not want to begin a cycle immediately, you may choose

the Delay Hrs. option. This will delay the start of the wash cycle by

up to 12 hours.

To set a delayed wash:

1. Touch SELECT DELAY HRS. to set the desired delay time.

2. Touch and hold START to start the delay countdown. The

countdown stops blinking.

1 3. Touch and hold START to begin

wash cycle

hold to start

Touch and hold START to start the wash cycle. To pause

a cycle in progress, touch START once, then touch and

hold again to continue the cycle. To cancel a cycle, touch

POWER/CANCEL

Once you touch and hold START, you will hear the door lock,

unlock, and lock again. The washer door will remain locked during

the wash cycle.

Unlocking the door to add garments:

ff you need to open the door to add 1 or 2 missed

garments, you may do so while the "Add a

Garment" light is [it.

Touch START once; the door will unlock once the

washer movement has stopped. This may take

several minutes. Then close door and touch and

hold START again to restart the cycle.

hold to start

1 4. Remove garments promptly

after cycle is finished

between the tub and the washer drum.

If you will be unable to remove the load promptly, . fresh [

use the Fresh Hold 1_option. If the Fresh Hold 1_ - had

[

option is selected, the washer will automatically

activate the fan and tumble the load periodically

for up to 12 hours. To turn off the Fresh Hold "j option, touch

POWER/CANCEL To set the washer so that the Fresh Hold 1_

option does not come on for future cycles, touch Fresh Hold.

NOTE:

[] The door will remain locked while the Fresh Hold'_"joption is

active. To cancel the option and unlock the door, touch

POWE R/CAN CEL,

[] A small amount of water may remain in the dispensers after

the wash cycle is complete. This is normal.

[] This washer has a tight seal to avoid water leaks. To avoid odors,

leave the door open to allow the washer to dry between uses.

WASHERMAINTENANCE

WASHER CARE

Recommendations to Help Keep Your Washer Clean

and Performing at its Best

1. Always use High Efficiency (HE) detergents and folJow the

HE detergent manufacturer's instructions regarding the

amount of HE detergent to use. Never use more than the

recommended amount because that may increase the rate

at which detergent and soiJ residue accumuJate inside your

washer, which in turn may resuJt in undesirable odor,

2. Use warm or hot water washes sometimes (not e×cJusiveJy

cold water washes), because they do a better job of controJJing

the rate at which soiJs and detergent accumulate,

3. AJways Jeave the washer door sJightJy ajar between uses

to help dry out the washer and prevent the buiJdup of

odor-causing residue,

Cleaning Your Front Loading Washer

Read these instructions completeJy before beginning the

routine cleaning processes recommended beJow. This Washer

Maintenance Procedure should be performed, at a minimum,

once per month or every 30 wash cycJes, whichever occurs

sooner, to control the rate at which soils and detergent may

otherwise accumulate in your washer,

Cleaning the Door Seal

1. Open the washer door and remove any clothing or items from

the washer,

2. inspect the gray colored seal between the door opening and

the drum for stained areas or soil buildup, Pull back the seal

to inspect all areas under the seal and to check for foreign

objects,

3. If stained areas or soiJ buiJdup are found, wipe down

these areas of the seal using either of the following

two procedures:

a. affresh _"Grit Grabber TM Cloth Procedure:

i, When the cycle is complete, gently pull back the rubber

door seal and clean the entire surface with the rough

side of the Grit Grabber TM cloth.

b. Dilute Liquid Chlorine Bleach Procedure:

i, Mix a dilute bleach solution, using 3/4 cup (177 mL) of

JiquidchJorine bleach and 1 gallon (3,8 L) of warm tap

water,

ii, Wipe the seal area with the diJutesolution, using

a damp cloth,

iii, Let stand 5 minutes,

iv, Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open,

IM PC RTANT:

[] Wear rubber gloves when cleaning with bleach,

[] Refer to the bleach manufacturer's instructions for

proper use,

WASHER CARE (cont.)

Cleaning the inside of the Washer

This washer has a special cycle that uses higher water volumes

in combination with affresh"" Washer Cleaner or liquid chlorine

bleach to thoroughly clean the inside of the washer, Steam

washer models also utilize steam to enhance cleaning in this

special cycle,

NOTE: Read these instructions completely before beginning the

cleaning process,

Begin procedure

1. affresh _ Washer Cleaner Cycle Procedure

(Recommended for Best Performance):

a. Open the washer door and remove any clothing or items,

b. Add an affresh"" Washer Cleaner tablet to the washer

drum,

c. Do not add the affresh '_ Washer Cleaner tablet to the

dispenser drawer,

d. Do not add any detergent or other chemical to the washer

when following this procedure,

e. Close the washer door.

f. Select the CLEAN WASHER cycle,

g. Touch and hold START to begin the cycle, The Clean

Washer Cycle Operation is described below.

2. Chlorine Bleach Procedure:

a. Open the washer door and remove any clothing

or items,

b. Open the dispenser drawer and add 1 cup (236 mL)

of liquid chlorine bleach to the bleach compartment.

NOTE: Use of more liquid chlorine bleach than is

recommended above could cause washer damage

over time,

c. Close the washer door and the dispenser drawer,

d. Do not add any detergent or other chemicals to the

washer when following this procedure,

e. Close the washer door,

f. Select the CLEAN WASHER cycle,

g. Touch and hold START to begin the cycle, The Clean

Washer Cycle Operation is described below.

NOTE: For best results, do not interrupt cycle,

Description of Clean Washer Cycle Operation:

1. The Clean Washer cycle will determine whether clothing

or other items are in the washer,

2. If no items are detected in the washer, it will proceed

with the cycle.

a. If any items are detected in the washer, "RL" (remove

Joad) wiJl be displayed. The door wiJJunlock. Open washer

and remove any garments from the washer drum,

b. Touch POWER/CANCEL to clear the "R L" code,

c. Touch and hold START to restart the cycle,

After the cycle is complete, leave the door open slightly to allow

for better ventilation and drying of the washer interior,

WASHER CARE (cont.)

Cancellation of Clean Washer Cycle Operation:

if the Clean Washer cycle is canceled by the user after it has

been initiated, it may take up to 30 minutes for the washer

to purge any affresh '_Cleaner, chlorine bleach, or other

chemistry from the wash system and to adequately rinse any

remaining chemistry. The washer door will remain locked until

the cancellation process has been completed, This ensures no

cleaning chemistry will be carried over to the next wash cycle

and reduces the potential for damage to subsequent loads of

laundry or to the washer itself,

Clean Washer Cycle Cancellation Procedure:

1. Touch POWER/CANCEL on the washer once,

2. The washer will begin to drain and rinse away the remaining

cleaning chemistry,

3. The cycle will complete the cancellation process in

approximately 30 minutes or less,

4. The washer then can be used to either repeat the Clean

Washer cycle or to wash laundry using one of the regular

wash cycles selected by the user,

Cleaning the Dispensers

After a period of using your washer, you may find some residue

buildup in the washer's dispensers. To remove residue from the

dispensers, remove the drawer and wipe the surfaces with a

damp cloth and towel dry either before or after you run the Clean

Washer cycle, Use an all-purpose surface cleaner, if needed,

IM PORTANT: Dispenser is not dishwasher safe,

Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe up any spills,

Occasionally wipe the outside of your washer to help keep it

looking new. Use mild soap and water,

IMPORTANT: To avoid damaging the washer's finish, do not use

abrasive products,

WASHER CARE (cont.)

Removing the Dispenser:

To remove:

1. Pull dispenser drawer out until it stops,

2. Press down on the release tab and pull straight out to

remove the dispenser,

3. Lift off cover panel by

pulling straight up,

To replace:

1. Slide cover panel back

onto posts on dispenser,

2. Align edges of dispenser

with guides in washer,

then slide dispenser

back into slot.

WASHERMAINTENANCE

WASHER CARE (cont.)

Cleaning the Optimal Dispense Cartridge

it is recommended that you rinse out the Optimal Dispense

cartridge when changing detergent types or concentrations,

or when the washer will not be used for an extended period,

1. Pull dispenser out until it stops,

2. Lift out the Optimal Dispense cartridge,

3. Lift cover on cartridge and flush interior thoroughly with warm

water,

4. Allow to air dry or wipe with a clean, soft towel,

IM PORTANT: Cartridge is not dishwasher safe,

NON=USE AN D VACATION CARE

Operate your washer only when you are home, if moving, or

not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer,

2. Turn off water supply to washer to avoid flooding due

to water pressure surges,

3. Clean the dispenser, See "Cleaning the Dispenser,"

WINTER STORAGE CARE

iMPORTANT: To avoid damage, install and store washer

where it will not freeze, Because some water may stay in

hoses, freezing can damage washer, if storing or moving

during freezing weather, winterize your washer,

To winterize washer:

1. Shut off both water faucets, disconnect and drain water

inlet hoses,

2. Put 1 qt. (1 L) of R.V.-type antifreeze in washer drum and

run washer on NORMAL cycle for about 2 minutes to mix

antifreeze and remaining water,

3. Unplug washer or disconnect power,

iMPORTANT: To reduce risk of hose failure, replace inlet

hoses every five years and periodically inspect for kinks, cuts,

wear or water leaks,

HELPFUL TiP: VVhen replacing your inlet hoses, mark

replacement date on label with a permanent marker,

TRANSPORTING YOUR WASHER

1. Shut off both water faucets, Disconnect and drain water

inlet hoses,

2. If washer will be moved during freezing weather, follow

Wl NTER STORAG E CARE directions before moving.

3. Disconnect drain hose from drain system and from back

of washer,

4. Unplug power cord,

5. Place inlet hoses and drain hose inside washer drum,

6. Bundle power cord with a rubber band or cable tie to keep

it from hanging onto the ground,

IMPORTANT: Call for service to install new transport bolts,

Do not reuse transport bolts. Washer must be transported

in the upright position, To avoid structural damage to your

washer, it must be properly set up for relocation by a certified

technician,

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage, or

moving:

1. Refer to installation instructions to locate, level, and

connect washer.

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to foflow these instructions can result in death,

fire, or electrical shock.

ABOUT DETERGENTCONCENTRATION

Today's liquid HE detergents are concentrated. Most brands of

concentrated HE detergent will show the level of concentration on

the bottle, if so, simply set the concentration level in the Optimal

Dispense menu to match the level shown on the bottle.

However, if the detergent bottle does not give the concentration, it

can be easily calculated. Just divide the package size in fluid ounces

by the number of loads. Then refer to the chart below to find the

concentration.

if you do not get your desired cleaning results, try using a lower

concentration number, if you have excess suds, try using a higher

concentration number.

Concentration Number of ounces + number of loads

2X 1.5-2.49

3X 0.9-1.49

4X 0.7-0.89

5X 0.5-0.69

6X 0.3-0.49

Plug in washer or reconnect power.

Run washer through NORMAL cycle to clean washer and

remove antifreeze, if used. Use only HE detergent. Use half

the manufacturer's recommended amount for a medium-size

load,

TROUBLESHOOTING

f First try the solutions suggested here or visit our website at www.maytag.com/product_help -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

if you experience _ Possible Causes Solution

Once any possible issues are corrected, touch POWER/CANCEL once to clear the code. Reselect and restart the cycle.

Sud (Excess suds)

appears in display

dEt (Detergent)

appears in display

Fn8 followed by En/

(water supply error)

appears in display

F09 followed by En_

(drain pump system

error) appears in display

F05 followed by En2

(door will not lock)

appears in display

Cf"/'_

Ju t followed by En/

(motor drive error)

appears in display

",PL" (remove load)

appears in display

The three detergent level

status lights are lit

Washer making error

beeps

Washer beeps when

START is touched

F## E## code other

than as described above

appears in display

Int (interrupted)

appears in display

Excessive suds in washer. Washer is

running a suds reduction routine.

The dispenser cartridge is not

detected.

Check for proper water supply.

Check plumbing for correct drain hose

installation. Drain hose extends into

standpipe farther than 41/2'' (114 mm).

Not using HE detergent or using too

much HE detergent.

Washer door not locking.

Motor is having difficulty turning the

washer drum.

Load detected in drum during Clean

Washer with affresh _-_cycle.

Detergent dispenser is not securely in

place.

Detergent Level sensor error.

Door has not been opened and closed

for at least 3 cycles.

Door not closed.

System error code.

The cycle was paused or cancelled.

Allow the washer to continue. Use only HE detergent.

Always measure detergent, and base detergent quantity on

load size. Follow detergent manufacturer's instructions.

Touch WATER HARDNESS to change water hardness to "soft_'

Ensure the dispenser cartridge is inserted correctly and the

dispenser drawer is shut completely. For single-load doses of

detergent, ignore this message.

Both hoses must be attached and have water flowing to the inlet

valve.

Both hot and cold water faucets must be on.

inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

Touch POWER/CANCEL once to clear the code. Then touch POWER/

CANCEL again to restart washer. If code appears again, call for service.

Check drain hose for proper installation.

Make sure the drain hose is not kinked, pinched, or blocked.

Remove any clogs from drain hose.

Use drain hose form and securely attach to drainpipe or tub.

Lower drain hose if the end is higher than 96" (2.4 m) above

the floor.

Use only HE detergent. Always measure detergent and follow

manufacturer's directions based on load size and soil level.

Touch POWER/CANCEL to cancel the cycle. Make sure the door is

closed completely and latching. Check for items in the washer drum

that may be keeping the door from closing completely.

Washer is tightly packed. Remove some items. See "Cycle Guide"

for load size recommendations. Make sure that all shipping

materials have been removed. See the Installation Instructions.

Remove items from washer drum and restart Clean Washer with

affresh "j cycle.

Pull out the dispenser and slide it back in place.

Touch POWER/CANCEL to reset system. If this fails, unplug

washer or disconnect power for one minute, then plug in washer or

reconnect power.

This code may appear when the washer is first turned on.

Open and close the door to clear the display.

Close the door completely.

Touch POWER/CANCEL once to clear the code. Then touch

POWER/CANCEL again to restart washer. If code appears again,

call for service.

The washer can take 20 to 30 minutes to stop spinning

and drain and will display this error code during that time.

Touch POWER/CANCEL once to clear the code. Then touch

POWER/CANCEL again to restart washer.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

in Canada www.maytag.ca for assistance and to possibly avoid a service call.

if you experience j

Possible Causes

Solution

Vibration, rocking, or Feet may not be in contact with the Front and rear feet must be in firm contact with floor, and washer

"walking" floor and locked, must be level to operate properly. Jam nuts must be tight against the

bottom of the cabinet.

Washer may not be level. Check floor for flexing or sagging, if flooring is uneven, a 3/4"

(19 mm) piece of plywood under your washer will reduce sound.

Load could be unbalanced

or too large,

The shipping bolts are still in the back

of the washer.

See "Level the Washer" in Installation instructions.

Avoid tightly packing the load. Avoid washing single items. Balance

a single item such as a rug or jeans jacket with a few extra items.

Item or load not suitable for selected cycle. See "Cycle Guide" and

"Using Your Washer"

See "Remove transport bolts from washer" in the installation

Instructions.

Clicking or metallic noises

Gurgling or humming

Door locking or unlocking.

Objects caught in washer drain system.

Washer may be draining water.

The door will lock, unlock, and lock again. You will hear three clicks

after touching and holding START. This is normal.

Empty pockets before washing. Loose items such as coins

could fall between washer drum and tub or may block pump.

it may be necessary to call for service to remove items.

it is normal to hear metal items on clothing such as metal snaps,

buckles, or zippers touch against the stainless steel washer drum.

The pump may make a humming sound with periodic gurgling

or surging as final amounts of water are removed during the spin/

drain cycles. This is normal at certain stages of the cycle.

Rolling or sloshing Steel balls in the balancing system are This is normal at certain stages of the cycle.

and occasional clicking balancing the load.

(on low-speed spin)

Check the following for

proper installation:

Fill hoses not attached tightly.

Fill-hose washers.

Drain hose connection.

Check household plumbing for leaks or

clogged sink or drain.

Not using HE detergent or using too

much HE detergent.

Residue on door glass.

Door opened during "Add a Garment_'

Water or suds leaking from

door or rear of cabinet

Load not completely Water level not visible on door or

covered in water does not cover clothes.

Tighten fill-hose connection.

Properly seat all four fill-hose fiat washers.

Check that the drain hose is properly secured to drainpipe or

laundry tub.

Water can back up out of a clogged sink or drainpipe. Check

all household plumbing for leaks (laundry tubs, drain pipe, water

pipes, and faucets.)

Only use HE detergent. Suds from regular detergents can

cause leaking from the door or rear of cabinet. Always measure

detergent and follow manufacturer's directions based on your load

requirements.

Periodically clean the underside of the glass window to avoid

potential leaks.

Water can drip off the inside of the door when the door is opened

after the start of a cycle.

This is normal for an HE front load washer. The washer senses load

sizes and adds the correct amount of water for optimal cleaning.

TROUBLESHOOTING

EJectrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

_lf you experience

Washer won't run or fill,

washer stops working

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

Possible Causes

Check for proper water supply.

Check proper electrical supply.

Normal washer operation.

The washer door is not firmly shut.

Washer not loaded as recommended.

Solution

Both hoses must be attached and have water flowing to inlet valve.

Both hot and cold water faucets must be turned on.

Check that inlet valve screens have not become clogged.

Check for any kinks in inlet hoses, which can restrict water flow.

Plug power cord into a grounded 3-prong outlet.

Do not use an extension cord.

Ensure there is power to outlet.

Check electrical source or call an electrician to check if voltage

is low.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: if problems continue, contact an electrician.

Door must be completely closed and latched for washer to run.

Washer will pause during certain phases of cycle. Do not interrupt

cycle.

The washer pauses for about 2 minutes during certain cycles.

Allow the cycle to continue. Some cycles feature periods of

tumbling and soak.

Washer may be stopped to reduce suds.

Cold Wash uses less water in the beginning of the cycle to

provide a high concentration of detergent for optimal cleaning

action. Following this concentrated tumbling, more water is used

to complete the wash.

The door must be closed during operation.

Remove several items, rearrange load evenly in washer drum.

Close door and touch and hold START.

Do not add more than 1 or 2 additional items after cycle has started

to avoid tightly packing or unbalancing.

Do not add more water to the washer.

La page est en cours de chargement...

Maytag MHW8000AG0 Manuel utilisateur

Marque: Maytag

Modèle: MHW8000AG0

Catégorie: Machines à laver

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MHW8000AG0 User manual

Documents connexes

Autres documents

Chore-Time MF2500A Poultry Winch Wall Control Mode d'emploi