LD Systems DAVE 12 G4X Manuel utilisateur

Catégorie
Ensembles de haut-parleurs
Taper
Manuel utilisateur

Ce manuel convient également à

DAVE G4X SERIES
COMPACT 2.1 PA SYSTEM
LDDAVE18G4X / LDDAVE15G4X / LDDAVE12G4X / LDDAVE10G4X
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
ABOUT THIS MANUAL 3
INTENDED USE 3
EXPLANATIONS OF TERMS AND SYMBOLS 3
SAFETY INSTRUCTIONS 4
SCOPE OF DELIVERY 7
ASSEMBLY AND CABLING 8
CONNECTIONS, CONTROLS AND INDICATORS 10
CARE, MAINTENANCE AND REPAIR 14
OPTIONAL ACCESSORIES 15
TECHNICAL DATA 16
MANUFACTURER'S DECLARATIONS 20
DEUTSCH
INFORMATIONEN ZU DIESER
BEDIENUNGSANLEITUNG 21
BESTIMMUNGSGEMÄSSER GEBRAUCH 21
BEGRIFFS- UND SYMBOLERKLÄRUNGEN 21
SICHERHEITSHINWEISE 22
LIEFERUMFANG 26
AUFBAU UND VERKABELUNG 27
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 29
PFLEGE, WARTUNG UND REPARATUR 33
OPTIONALES ZUBEHÖR 34
TECHNISCHE DATEN 35
ENTSORGUNG 38
HERSTELLERERKLÄRUNGEN 39
FRANCAIS
INFORMATIONS SUR CE MODE D‘EMPLOI 40
UTILISATION RÉGLEMENTÉE 40
EXPLICATIONS DES TERMES ET DES SYMBOLES 40
CONSIGNES DE SÉCURITÉ 41
CONTENU DE LA LIVRAISON 45
MONTAGE ET CÂBLAGE 46
CONNEXIONS, ÉLÉMENTS DE COMMANDE ET
D‘AFFICHAGE 48
ENTRETIEN, MAINTENANCE ET RÉPARATION 52
ACCESSOIRES OPTIONNELS 53
DONNÉES TECHNIQUES 54
DÉCLARATIONS DU FABRICANT 58
ESPAÑOL
INFORMACIÓN SOBRE ESTAS INSTRUCCIONES DE
USO
59
USO CONFORME A LA NORMATIVA 59
EXPLICACIONES DE TÉRMINOS Y SÍMBOLOS 59
INSTRUCCIONES DE SEGURIDAD 60
ALCANCE DE LA ENTREGA 64
MONTAJE Y CABLEADO 65
CONEXIONES, CONTROLES E INDICADORES 67
CUIDADO, MANTENIMIENTO Y REPARACIÓN 71
ACCESORIOS OPCIONALES 72
DATOS TÉCNICOS 73
DECLARACIONES DEL FABRICANTE 77
POLSKI
INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI
OBSŁUGI 78
STOSOWANIE ZGODNIE Z PRZEPISAMI 78
OBJAŚNIENIA TERMINÓW I SYMBOLI 78
INSTRUKCJE BEZPIECZEŃSTWA 79
ZAKRES DOSTAWY 83
MONTAŻ I OKABLOWANIE 84
POŁĄCZENIA, ELEMENTY STERUJĄCE I WSKAŹNIKI 86
PIELĘGNACJA, KONSERWACJA I NAPRAWA 90
AKCESORIA OPCJONALNE 91
DANE TECHNICZNE 92
OŚWIADCZENIA PRODUCENTA 96
ITALIANO
INFORMAZIONI SU QUESTE ISTRUZIONI PER L‘USO 97
UTILIZZO IN CONFORMITÀ ALLE NORMATIVE 97
SPIEGAZIONI DI TERMINI E SIMBOLI 97
ISTRUZIONI DI SICUREZZA 98
AMBITO DI CONSEGNA 102
MONTAGGIO E CABLAGGIO 103
CONNESSIONI, CONTROLLI E INDICATORI 105
CURA, MANUTENZIONE E RIPARAZIONE 109
ACCESSORI OPZIONALI 110
DATI TECNICI 111
DICHIARAZIONI DEL PRODUTTORE 115
3
ENGLISH
YOU MADE THE RIGHT CHOICE!
This device was developed and manufactured under high quality requirements to ensure many years of
trouble-free operation. This is what LD Systems stands for with its name and many years of experience
as a manufacturer of high-quality audio products. Please read these operating instructions carefully so
that you can quickly and optimally use your new LD Systems product.
You can find more information about LD Systems on our website WWW.LD-SYSTEMS.COM
ABOUT THIS MANUAL
Read the safety instructions and the entire manual carefully before commissioning.
Observe the warnings on the unit and in the operating instructions.
Always keep the operating instructions within reach.
If you sell or pass on the appliance, be sure to hand over these operating instructions as well, as they
are an essential part of the product.
INTENDED USE
The product is a device for event technology!
The product has been developed for professional use in the field of event technology and is not
suitable for use in households!
Furthermore, this product is only intended for qualified users with specialist knowledge of event
technology!
Use of the product outside the specified technical data and operating conditions is considered
improper use! Liability for damage and third party damage to persons and property due to
non-intended use is excluded!
The product is not suitable for:
People (including children) with reduced physical, sensory or mental abilities or lack of experience
and knowledge.
Children (Children must be instructed not to play with the device).
EXPLANATIONS OF TERMS AND SYMBOLS
1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately dangerous
situations or conditions for life and limb.
2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially danger-
ous situations or conditions for life and limb
3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situations or
conditions that may lead to injury.
4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations or
states that can lead to damage to property and/or the environment.
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
4
This symbol indicates hazards that can cause an electric shock.
This symbol indicates danger spots or dangerous situations.
This symbol indicates danger from hot surfaces.
This symbol indicates danger from high volumes.
This symbol indicates supplementary information on the operation of the product.
This symbol denotes a device that does not contain any user-serviceable parts.
SAFETY INSTRUCTIONS
DANGER:
1. Do not open or modify the device.
2. If your device is no longer working properly, liquids or objects have gotten inside the
device, or the device has been damaged in any other way, switch it off immediately and
disconnect it from the power supply. This device may only be repaired by authorized
specialist personnel.
3. For devices of protection class 1, the protective conductor must be connected correctly.
Never interrupt the protective conductor. Protection class 2 devices do not have a protec-
tive conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device must not be put into operation if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the power cord of the device is damaged, the device must not be put into operation.
4. Permanently connected power cords may only be replaced by a qualified person.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
5
DANGER:
1. Do not operate the device if it has been exposed to severe temperature fluctuations (e.g.
after transport). Humidity and condensation could damage the device. Do not switch on
the device until it has reached the ambient temperature.
2. Make sure that the voltage and frequency of the mains supply correspond to the values
indicated on the device. If the device has a voltage selector switch, do not connect the
device until this is set correctly. Only use suitable power cords.
3. To disconnect the device from the mains at all poles, it is not enough to press the on/off
switch on the device.
4. Ensure that the fuse used corresponds to the type printed on the device.
5. Make sure that appropriate measures against overvoltage (e.g. lightning) have been
taken.
6. Note the specified maximum output current on devices with a power out connection.
Make sure that the total power consumption of all connected devices does not exceed
the specified value.
7. Only replace pluggable power cords with original cables.
DANGER:
1. Danger of suffocation! Plastic bags and small parts must be kept out of the reach of
people (including children) with reduced physical, sensory or mental abilities.
2. Danger from falling! Make sure the device is installed securely and cannot fall. Only use
suitable tripods or attachments (especially for fixed installations). Make sure accessories
are properly installed and secured. Make sure that the applicable safety regulations are
observed.
WARNING:
1. Only use the device in the manner intended.
2. Only operate the device with the accessories recommended and intended by the
manufacturer.
3. During installation, observe the safety regulations applicable in your country.
4. After connecting the unit, check all cable routes to avoid damage or accidents, e.g. due
to tripping hazards.
5.
Be sure to observe the specified minimum distance to normally flammable materials!
Unless this is explicitly stated, the minimum distance is 0.3 m.
ATTENTION:
1. There is a risk of jamming with moving components such as mounting brackets or other
moving components.
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
6
DANGER:
1. Do not install or operate the device near radiators, heat registers, stoves or other heat
sources. Make sure that the device is always installed in such a way that it is sufficiently
cooled and cannot overheat.
2. Do not place any sources of ignition such as burning candles near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or shock to the device.
6. Observe the IP protection class and the environmental conditions such as temperature
and humidity according to the specification.
7. Devices can be continuously developed. In the event of deviating information on operat-
ing conditions, performance or other device properties between the operating instruc-
tions and the device labeling, the information on the device always has priority.
8. The device is not suitable for tropical climate zones and for operation above 2000 m
above sea level.
ATTENTION:
Connecting signal cables can result in significant noise interference. Make sure that devices
connected to the output are muted during plugging. Otherwise, noise levels can cause
damage.
ATTENTION HIGH VOLUMES WITH AUDIO PRODUCTS!
This device is intended for professional use.
The commercial operation of this device is subject to the applicable national regulations and
guidelines for accident prevention.
Hearing damage due to high volumes and continuous exposure: The use of this product can
generate high sound pressure levels (SPL) which can cause hearing damage. Avoid exposure to
high volumes.
SIGNAL TRANSMISSION VIA RADIO (e.g. W-DMX or audio radio systems, Bluetooth):
The quality and performance of wireless signal transmissions generally depends on the
environmental conditions.
Influence on the range and signal stability, for example:
Shielding (e.g. masonry, metal structures, water)
High radio traffic (e.g. strong W-LAN networks)
Interference
Electromagnetic radiation (e.g. LED video walls, dimmers)
All range specifications refer to free field use with visual contact without interference!
The operation of transmitters is subject to official regulations. These can vary from region to
region and must be checked by the operator before commissioning (e.g. radio frequency and
transmission power).
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
7
WARNING:
Devices with wireless signal transmission are not suitable for operation in sensitive areas in
which radio operation can lead to possible interactions. These include, for example:
Hospitals, health centers or other healthcare facilities that perform patient treatments
with specialized staff and equipment.
Class I, II and III hazardous areas
restricted areas
military facilities
airplanes or vehicles
Areas where cell phone use is prohibite
NOTES FOR PORTABLE INDOOR DEVICES
1.
Temporary operation! Event equipment is basically only designed for temporary operation.
2.
Continuous operation or permanent installation can lead to impairment of the function
and premature aging of the devices.
SCOPE OF DELIVERY
Remove the product from the packaging and remove all packaging material.
Check that the delivery is complete and intact and notify your distributor immediately after purchase if
the delivery is incomplete or damaged.
The scope of delivery of the product DAVE 18 G4X includes:
1x DAVE 18 G4X Subwoofer
2x DAVE 18 G4X Satellite
Power cord
Operating instructions
The scope of delivery of the product DAVE 15 G4X includes:
1x DAVE 15 G4X Subwoofer
2x DAVE 15 G4X Satellite
Power cord
Operating instructions
The scope of delivery of the product DAVE 12 G4X includes:
1x DAVE 12 G4X Subwoofer
2x DAVE 12 G4X Satellite
Power cord
Operating instructions
The scope of delivery of the product DAVE 10 G4X includes:
1x DAVE 10 G4X Subwoofer
2x DAVE 10 G4X Satellite
Power cord
Operating instructions
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
8
ASSEMBLY AND CABLING
DANGER:
Always place the speaker system in a suitable location on a sufficiently stable, level and
horizontal surface. Make sure that the speaker system cannot fall off the edge of a stage
(e.g. due to vibration). There is a risk that equipment that has not been set up and positioned
correctly will fall over or down. This can cause serious injury or death.
For optimal sound distribution of the bass, position the subwoofer centrally between the two satellite
speakers A. If a central position is not possible, the subwoofer can alternatively be positioned side-
ways B. Use the M20 flange on the top of the subwoofer to attach a distance rod. In both cases, select
the DSP preset corresponding to the set-up variant (MODE SELECT, left symbol).
The DAVE 12, DAVE 15 and DAVE 18 G4X satellites have a dual tilt flange with 0° and 5° tilt. Use the 0°
flange with a standing audience and adjust the height of the bottom edge of the satellites to approxi-
mately the head height of the audience.
Use the 5° tilt flange with a seated audience. Pay attention to the maximum permissible load and
height of the stands and spacer rods used (stands and spacer rods optionally available).
The entire electronics with DSP and power amplifiers are located in the subwoofer of the DAVE G4X
speaker systems, therefore a connection between subwoofer and satellites only has to be made using
suitable speaker cables (optionally available, recommendation min. 2 x 1.5 mm²).
A
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
9
B
If the standard set-up of the DAVE G4X speaker system is not desired or possible, the set-up can be done
with a distance rod and a stand fork mounted on the subwoofer C. In order to achieve an impressive
stereo sound and to avoid unpleasant interference, select the DSP preset that corresponds to this setup
variant (MODE SELECT, right symbol) and use the stereo input INPUT 3L / 4R for control (XLR/jack combo
sockets or cinch sockets).
C
To set up 2 complete DAVE G4X speaker systems, positioned left and right in front of a stage, also use
distance rods with stand forks mounted on the subwoofers D. For both systems, select the DSP preset
that corresponds to this set-up variant (MODE SELECT, right symbol) and assign one mono channel each
(e.g. INPUT 1, SELECT LINE) to the left and right line signal of a feed device (e.g. mixing console). The
loudspeaker cables of a system should be crossed and connected to the satellites (right system in the
example).
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
10
D
CONNECTIONS, CONTROLS AND INDICATORS
The connection and mixer sections of the DAVE G4X speaker systems are identical and are located on
the rear of the corresponding subwoofers (representative DAVE 18 G4X).
3
4
6
21
5
7
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
11
1 POWER INPUT
IEC mains socket with integrated fuse holder. A suitable power cord is included in the scope of delivery.
IMPORTANT NOTE: Replace the fuse only with one of the same type and rating. Pay attention to the
imprint on the housing. If the fuse blows repeatedly, please contact an authorised service centre.
2 POWER
On/off switch. Always switch on the speaker system as the last unit in the signal chain and switch it off
again as the first unit.
3 INPUT 1 / INPUT 2
Audio inputs with combo sockets (XLR / 6.3 mm jack), which are suitable for both unbalanced and bal-
anced cabling. The inputs are adjusted to the signal source using the SELECT button in the subwoofer’s
mixer section (LINE, HI-Z and MIC).
4 INPUT 3 L / INPUT 4 R
Stereo line input with combo jacks (XLR / 6.3 mm jack), suitable for both unbalanced and balanced
cabling. Connection for a keyboard or external mixer, etc.. Only use connections no. 4 and no. 5 alterna-
tively.
5 RCA INPUT 3 L / INPUT 4 R
Stereo line input with cinch sockets for connecting an audio player (CD player, MP3 player, tablet, etc.).
Only use connections no. 4 and no. 5 as alternatives.
6 INPUT 5/6 SPDIF
Digital stereo input in optical SPDIF format with TosLink socket. Connection for a playback device with
optical SPDIF output.
7 SAT LEFT / SAT RIGHT
Speakon compatible connectors for the corresponding DAVE G4X satellites.
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
12
19
8
9
10
11
13
12 12
18
16
17
20 21
22
14 15
8 INPUT 1 / INPUT 2
Volume control for channels 1 and 2. Turning to the right increases the volume, turning to the left
decreases it.
9 SELECT
Adjustment to the signal source is done with the SELECT button. If necessary, press the button repeat-
edly to adjust the audio input to the corresponding signal source. Select LINE for an audio signal with
line level, HI-Z for connecting a guitar with pick-up and MIC for connecting a microphone (correspond-
ing indicator field LINE, HI-Z or MIC lights up white) .
10 HIGH
Control for raising (turn to the right) or lowering (turn to the left) the treble in channel 1 or channel 2. In
the centre position (detent point), there is no influence on the audio signal.
11 LOW
Knob for increasing (turn to the right) or decreasing (turn to the left) the bass in channel 1 or channel 2.
In the middle position (detent point), the audio signal is not affected.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
13
12 REVERB
Level control for mixing the signal from channel 1 or channel 2 to the internal digital effects unit.
13 PRESET PLATE / LARGE / SMALL / OFF
If necessary, press the PRESET button repeatedly to select the desired effect preset or to switch off the
reverb effect. The corresponding indicator field of the three effects lights up white; when the reverb
effect is switched off, none of the indicator fields light up.
14 INPUT 3/4
Volume control for stereo channel 3/4. Turning to the right increases the volume, turning to the left
decreases it.
15 INPUT 5/6
Volume control for stereo channel 5/6. Turning to the right increases the volume, turning to the left
decreases it.
16 SOURCE
Button for selecting the signal source SPDIF or Bluetooth for channel 5/6. The corresponding display
field lights up white.
17 HOLD TO LINK
Press the HOLD TO LINK button for about 3 seconds to put the internal Bluetooth module into pairing
standby, the connection to a previously paired device is disconnected. The Bluetooth symbol flashes for
the duration of the pairing readiness. Activate Bluetooth on your playback device (smartphone, tablet,
etc.) and select LD DAVEG4 in the Bluetooth menu. Pairing is now automatic; as soon as the devices are
paired, the Bluetooth symbol lights up permanently. Audio playback via Bluetooth can now be started.
18 MODE SELECT
Select the symbol corresponding to the set-up variant of the DAVE G4X speaker system using the SELECT
button. This optimises the radiation pattern of the satellite speakers accordingly. The symbol for the
selected set-up variant lights up white.
19 SUB
Volume control for the subwoofer. Turning to the right increases the volume, turning to the left
decreases it.
20 HIGH
High shelf filter for adjusting the treble reproduction to the room acoustics
(turn to the left = lowering, turn to the right = raising, centre position = no influence).
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
14
21 STATUS DISPLAY
POWER:
Lights up when the subwoofer is correctly connected to the mains and switched on.
SIGNAL:
Indicator for the mixer sum signal. The signal detection takes place before the MAIN volume control.
LIMIT:
Lights up when the speaker system is operated in the upper limit range. A short flash of the LIMIT
indicator is not critical. To protect the system, an excessive signal level is gently reduced by the
integrated limiter. If the LIMIT indicator lights up for a longer time or permanently, reduce the volume
level. Failure to do so may result in distorted sound reproduction and damage to the speaker system.
PROTECT:
The PROTECT indicator lights up permanently if the system is overloaded or overheats. The integrated
amplifiers are automatically muted. After reaching normal operating conditions, the unit switches back
to normal operating mode after a few minutes and the PROTECT indicator goes out.
22 MAIN
Adjust the overall volume. The subwoofer volume is also adjusted according to the setting on the
SUB volume control. Turning to the right increases the volume, turning to the left decreases it.
CARE, MAINTENANCE AND REPAIR
To ensure the proper functioning of the unit in the long term, it must be cared for regularly and
serviced as required. The need for care and maintenance depends on the intensity of use and the
environment.
We generally recommend a visual inspection before each start-up. Furthermore, we recommend that
you carry out all the maintenance measures listed below every 500 operating hours or, in the case
of low intensity of use, after one year at the latest. Defects caused by inadequate care may result in
limitations of the warranty claims.
CARE (CAN BE CARRIED OUT BY THE USER)
WARNING! Before carrying out any maintenance work, disconnect the power supply and, if
possible, all appliance connections.
NOTE! Improper care can lead to impairment or even destruction of the unit.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can penet-
rate the unit.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make
sure that damage to the unit is prevented (e.g. fans must be blocked in this case).
3. Cables and plug contacts must be cleaned regularly and freed from dust and dirt.
4. In general, no cleaning agents, disinfectants or agents with an abrasive effect may be used for
maintenance, otherwise the surface finish may be impaired. Especially solvents, such as alcohol, can
impair the function of the housing seals.
5. Units should generally be stored in a dry place and protected from dust and dirt.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
15
MAINTENANCE AND REPAIR (BY QUALIFIED PERSONNEL ONLY)
DANGER! There are live components in the unit. Even after disconnecting from the mains,
residual voltage may still be present in the unit, e.g. due to charged capacitors.
NOTE! There are no assemblies in the unit that require maintenance by the user.
NOTE! Maintenance and repair work may only be carried out by specialist personnel authori-
sed by the manufacturer. In case of doubt, contact the manufacturer.
NOTE! Improperly performed maintenance work can affect the warranty claim.
OPTIONAL ACCESSORIES
DAVE 10 G4X
Trolley for subwoofer
Item number LDD10G4XSUBBAG
Bag for satellites
Item number LDD10G4XSATBAG
Bag & Trolley set
Item number LDD10G4XBAGSET
Stand
Item number LDD10G4XSTAND
Dual stand
Item number LDD10G4XDSTAND
DAVE 12 G4X
Castor board
Item number LDD12G4XCB
Cover for satellite (piece)
Item number LDD12G4XSATPC
Cover for subwoofer
Item number LDD12G4XSUBPC
T-Bar
Item number LDDG4XTBARL
DAVE 15 G4X
Castor board
Item number LDD15G4XCB
Cover for satellite (piece)
Item number LDD15G4XSATPC
Cover for subwoofer
Item number LDD15G4XSUBPC
T-Bar
Item number LDDG4XTBARL
DAVE 18 G4X
Castor board
Item number LDD18G4XCB
Cover for satellite (piece)
Item number LDD18G4XSATPC
Cover for subwoofer
Item number LDD18G4XSUBPC
T-Bar
Item number LDDG4XTBARL
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
16
TECHNICAL DATA
Item number LDDAVE10G4X LDDAVE12G4X LDDAVE15G4X LDDAVE18G4X
General
Weight 24.5 Kg 43.7 Kg 53.9 Kg 63.2 kg
Product type PA Complete
Systems
PA Complete
Systems
PA Complete
Systems
PA Complete
Systems
Colour Black Black Black Black
System Power (RMS) 340 W 730 W 1030 W 2000 W
System Power (peak) 680 W 1460 W 2060 W 4000 W
Max. SPL (continuous) 114 dB 120 dB 124 dB 126 dB
Max. SPL (peak) 120 dB 127 dB 130 dB 134 dB
Frequency response
-10 dB
37 Hz - 20000 Hz 37 Hz - 20000 Hz 33 Hz - 20000 Hz 30 Hz - 20000 Hz
Crossover frequency 110 Hz 105 Hz 105 Hz 105 Hz
Dispersion (H x V) 100° x 60° 90° x 50° 90° x 30° 90° x 30°
Subwoofer
Woofer size 10“ 12“ 15“ 18“
Woofer magnet Ferrite Ferrite Ferrite Ferrite
Woofer brand Custom-made Custom-made Custom-made Custom-made
Woofer voice coil 2“ 2.5“ 3“ 4“
Woofer voice coil (mm) 50 mm 63 mm 75 mm 100 mm
Cabinet construction Bass reflex Bass reflex Bass reflex Bass reflex
Cabinet material 15 mm/18 mm
Multiplex
15 mm/18 mm
Multiplex
15 mm/18 mm
Multiplex
15 mm/18 mm
Multiplex
Cabinet surface Polyurea Polyurea Polyurea Polyurea
Subwoofer width 350 mm 450 mm 515 mm 545 mm
Subwoofer height 436 mm 505 mm 575 mm 640 mm
Subwoofer depth 440 mm 510 mm 585 mm 665 mm
Subwoofer features 6 channel mixer,
Bluetooth, SPDIF,
Stereo / Cluster
mode, 3 Reverb
presets, M20
6 channel mixer,
Bluetooth, SPDIF,
Stereo / Cluster
mode, 3 Reverb
presets, M20
6 channel mixer,
Bluetooth, SPDIF,
Stereo / Cluster
mode, 3 Reverb
presets, M20
6 channel mixer,
Bluetooth, SPDIF,
Stereo / Cluster
mode, 3 Reverb
presets, M20
Handles 2 2 2 2
Weight 16.5 kg 27.1 kg 34.5 kg 43.8 kg
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
17
Item number LDDAVE10G4X LDDAVE12G4X LDDAVE15G4X LDDAVE18G4X
Mid/Hi System
Midrange size 2 x 4“ 6.5“ 8“ 8“
Midrange magnet Ferrite Ferrite Ferrite Ferrite
Midrange brand Custom-made Custom-made Custom-made Custom-made
Midrange voice coil 1“ 1.5“ 1.5“ 2“
Midrange voice coil 25.4 mm 38.6 mm 38.6 mm 50 mm
Horn CD Waveguide CD Horn CD Horn CD Horn
Tweeter dimensions 1“ 0.5“ 2 x 0.5“ 2 x 0.5“
Tweeter dimensions
(mm)
25.4 mm 12.7 mm 2 x 12.7 mm 2 x 12.7 mm
Tweeter magnet Neodym Neodym Neodym Neodym
Tweeter brand Custom-made Custom-made Custom-made Custom-made
Tweeter voice coil 1“ 1“ 1“ 1“
Tweeter voice coil
(mm)
25.4 mm 25.4 mm 25.4 mm 25.4 mm
Mid/Hi system
impedance
4 Ohms 4 Ohms 4 Ohms 4 Ohms
Loudspeaker inputs 1 1 1 1
Speaker input
connections
Speakon compatible Speakon compatible Speakon compatible Speakon compatible
Cabinet construction
mid/high
Bass reflex Bass reflex Bass reflex Bass reflex
Handles 1 1 1 1
Mid/Hi system cabinet
material
12 mm / 15 mm
Multiplex
12 mm / 15 mm
Multiplex
12 mm / 15 mm
Multiplex
12 mm / 15 mm
Multiplex
Mid/Hi system cabinet
surface
Polyurea Polyurea Polyurea Polyurea
Mid/Hi system width 150 mm 252 mm 275 mm 275 mm
Mid/Hi system height 345 mm 435 mm 470 mm 470 mm
Mid/Hi system depth 170 mm 250 mm 260 mm 260 mm
Mid/Hi system features Star Flange 16 mm
0° / 5° Flange 36 mm,
Midrange Waveguide
0° / 5° Flange 36 mm,
Midrange Waveguide
0° / 5° Flange 36 mm,
Midrange Waveguide
Weight 4 kg 8.3 kg 9.7 kg 9.7 Kg
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
18
Item number LDDAVE10G4X LDDAVE12G4X LDDAVE15G4X LDDAVE18G4X
Amplier module (integrated in subwoofer)
Amplifier Class D Class D Class D Class D
Amplifier output (RMS) Subwoofer: 170 W,
Satellites: 2 x 85 W
Subwoofer: 370 W,
Satellites: 2 x 180 W
Subwoofer: 500 W,
Satellites: 2 x 265 W
Subwoofer: 1000 W,
Satellites: 2 x 500 W
Protection circuits Limiter, overload,
short circuit
Limiter, overload,
short circuit
Limiter, overload,
short circuit
Limiter, overload,
short circuit
Cooling Passive Passive Passive Passive
Operating Temperature 0 °C - 40 °C 0 °C - 40 °C 0 °C - 40 °C 0 °C - 40 °C
Relative Humidity < 80%
(non-condensing)
< 80%
(non-condensing)
< 80%
(non-condensing)
< 80%
(non-condensing)
Controls Power,
Sub/High level,
Main volume,
Input volume,
Input type,
Stereo / Cluster
mode, Reverb,
Low/High EQ
Power,
Sub/High level,
Main volume,
Input volume,
Input type,
Stereo / Cluster
mode, Reverb,
Low/High EQ
Power,
Sub/High level,
Main volume,
Input volume,
Input type,
Stereo / Cluster
mode, Reverb,
Low/High EQ
Power,
Sub/High level,
Main volume,
Input volume,
Input type,
Stereo / Cluster
mode, Reverb,
Low/High EQ
Indicators Protect, Limit,
Signal, Power
Protect, Limit,
Signal, Power
Protect, Limit,
Signal, Power
Protect, Limit,
Signal, Power
Power connector IEC IEC IEC IEC
Operating voltage 100 VAC - 240 VAC 100 VAC - 240 VAC 100 VAC - 240 VAC 100 VAC - 240 VAC
Power consumption 120 W 300 W 400 W 600 W
Multi Inputs 2 x Switchable
(MIC, LINE, HI-Z)
2 x Switchable
(MIC, LINE, HI-Z)
2 x Switchable
(MIC, LINE, HI-Z)
2 x Switchable
(MIC, LINE, HI-Z)
Multi Input connectors Combo-XLR Combo-XLR Combo-XLR Combo-XLR
Line Inputs 2 2 2 2
Line Input connectors Combo-XLR, RCA Combo-XLR, RCA Combo-XLR, RCA Combo-XLR, RCA
Digital Inputs 2 2 2 2
Digital Input
connectors
SPDIF SPDIF SPDIF SPDIF
Loudspeaker outputs 2 2 2 2
Speaker output
connections
Speakon compatible Speakon compatible Speakon compatible Speakon compatible
Bluetooth-Profil A2DP A2DP A2DP A2DP
Bluetooth-Audio-
Decoder
SBC SBC SBC SBC
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
19
DISPOSAL
Packing:
1. Packaging can be fed into the recycling system via the usual disposal channels.
2. Please separate the packaging according to the disposal laws and recycling regulations in
your country.
Device:
1. This appliance is subject to the European Directive on Waste Electrical and Electronic
Equipment as amended. WEEE Directive Waste Electrical and Electronical Equipment. Old
appliances and batteries do not belong in household waste. The old appliance or batter-
ies must be disposed of via an approved waste disposal company or a municipal waste
disposal facility. Please observe applicable regulations in your country!
2. Observe all disposal laws applicable in your country.
3. As a private customer, you can obtain information on environmentally friendly disposal
options from the dealer from whom the product was purchased or from the relevant
regional authorities.
Batteries and rechargeable batteries:
1. Batteries and rechargeable batteries do not belong in household waste. Batteries and
rechargeable batteries must be disposed of via an authorised disposal company or a
municipal disposal facility.
2. Observe all disposal laws and regulations applicable in your country.
3. As a private customer, you can obtain information on environmentally friendly disposal
options from the dealer from whom the product was purchased or from the relevant
regional authorities.
4. Appliances with batteries or accumulators that cannot be removed by the user must be
handed in at a collection point for electrical appliances.
MANUFACTURER'S DECLARATIONS
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach / E-Mail [email protected] / +49 (0)6081 / 9419-0.
Our current warranty conditions and limitation of liability can be found at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_LD_SYSTEMS.pdf.
In case of service, please contact your sales partner.
UKCA- CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable)
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulation 2012 (SI 2012/3032)
Radio Equipment Regulations 201 7(SI 2016/2015)
UKCA- DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC Regulation 2016 or
RoHS Regulation can be requested at [email protected]. Products that are subject to the Radio
Equipments Regulations 2017 (SI2017/1206) can be downloaded from
www.adamhall.com/compliance/
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
20
FCC STATEMENT
1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut
Fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émet-
teur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention
des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une commu-
nication satisfaisante.
Ce matériel est conforme aux limites de dose d’exposition aux rayonnements, FCC / CNR-102 énoncée
dans un autre environnement.cette eqipment devrait être installé et exploité avec distance minimale
de 20 entre le radiateur et votre corps.
Misprints and errors as well as technical or other changes are reserved!
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116

LD Systems DAVE 12 G4X Manuel utilisateur

Catégorie
Ensembles de haut-parleurs
Taper
Manuel utilisateur
Ce manuel convient également à