NAPOLEON PRO665-3 Le manuel du propriétaire

PRESTIGE PRO 500, 665, 825

PRESTIGE PRO® SERIES

Owner's Manual

Grills illustrated in this manual may differ

from model purchased.

We Want Your Feedback!

Visit Napoleon.com to write a review

and register your grill.

Apply Serial Number

2 | Welcome Napoleon.com | PRESTIGE PRO® Series

Welcome

WE WANT YOUR GRILLING EXPERIENCE TO BE MEMORABLE AND SAFE.

Please read and follow this Owner’s Manual before using your grill to avoid property damage, personal injury, or death.

Remove all packaging material, promotional labels and cards from the grill before use.

USE OUTDOORS IN A WELL-VENTILATED SPACE

WARNING!

Do not try to light this appliance without reading the

“LIGHTING” instructions section of this manual

Do not store or use gasoline, or other ﬂammable liquids

or vapors in the vicinity of this or any other appliance

An L.P. (propane) cylinder not connected for use

must not be stored in the vicinity of this or any other

appliance

If the information in these instructions is not followed

exactly, a ﬁre or explosion may result and cause

property damage, personal injury, or death

!!

DANGER!

IF YOU SMELL GAS:

•Shut off gas to the appliance

•Extinguish any open ﬂame

•Open lid

•If odor continues, keep away from the appliance and

immediately call your gas supplier, or ﬁre department.

Alert adults and children about the hazard of hot surface temperatures. Supervise young children near the grill.

NOTICE TO INSTALLER: Leave these instructions with the grill owner for future reference.

NOTICE TO CONSUMER: Keep these instructions for future reference.

CONGRATULATIONS

ON YOUR NAPOLEON GRILL!

You’ve Just Upgraded Your Grilling Game.

Napoleon.com | PRESTIGE PRO® Series Welcome | 3

Welcome

FC

Welcome to Napoleon!

SAFETY FIRST

WARNING General Information

This grill should be installed in conformity with local codes. In

absence of local codes, install to the current Natural Gas and

Propane Installation Code CSA B149.1 in Canada, or the National Fuel Gas

Code ANSI Z223.1/NFPA 54 in the United States.

If a rotisserie motor is used, it must be electrically grounded in accordance

with local codes. If an external electrical source is utilized, the appliance

must also be grounded in accordance with local codes. In absence of local

codes, follow the current Canadian Electrical Code CSA C22.1 in Canada,

or the National Electrical Code ANSI/NFPA 70 in the United States.

WARNING! Electrical Precautions

Keep all electrical supply cords and fuel supply hoses away from all

heated surfaces.

To protect against electric shock, do not immerse the cord or plug in water

or other liquids.

When connecting, ﬁrst connect plug to appliance, then plug the appliance

into outlet. Use only a Ground Fault Interrupter (GFI) protected circuit with

this outdoor cooking appliance.

Never remove the grounding plug. Never use with an adapter of 2 prongs.

Use only extension cords with a 3 prong grounding plug that has been

rated for the power of the equipment and approved for outdoor use with

W-A marking.

WARNING! Operation

Read this entire Owner’s Manual before operating this grill.

Leak Test this grill before each use, annually and when any gas components are

replaced.

Follow the lighting instructions carefully.

Do not let the cord hang over the edge of a table.

Do not use this grill for purposes other than intended.

Do not operate this grill with a damaged cord, plug, or after the grill

malfunctions or has been damaged in any manner. Contact Napoleon for repair.

WARNING! Installation & Assembly

Assemble this grill exactly as instructed in the Assembly Guide. If

the grill was assembled in-store, review the assembly instructions

to ensure it is done correctly. This grill is not intended to be installed in or

on boats or installed in or on recreational vehicles.

Perform the required Leak Test before operating the grill.

Do not modify this grill under any circumstances.

Allow grill to cool before installing or removing parts.

Do not use a cylinder that is not equipped with a QCC1 type connection.

Only use the pressure regulator and hose assembly supplied with this grill

or replacement parts speciﬁcally recommended by Napoleon.

WARNING! Storage & Disuse

Turn off gas at the propane cylinder or natural gas supply valve.

Disconnect the hose between the propane cylinder and grill.

Remove the propane cylinder and store outdoors in a well-ventilated space

away from children.

Unplug from the outlet when not in use and before cleaning.

DO NOT store propane cylinders in a building, garage, shed, or any other

enclosed space.

Disconnect the natural gas hook-up from the supply when storing the grill

indoors.

WARNING! California Proposition 65

This product can expose you to chemicals including soot,

which are known to the State of California to cause cancer, and

chemicals including carbon monoxide, which are known to the State of

California to cause birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

!

ES

EMAIL

[email protected]

ONLINE

www.napoleon.com

PHONE:

1-866-820-8686

CONTENTS

Welcome to Napoleon! 3

Safety First

Full System Features 4

Getting Started 5

Gas Connections

Leak Test

Operation 9

Lighting your grill

Grilling Instructions

How to use the Rear Burner & Rotisserie

Illumination Instructions

The Grilling Experience Checklist

How to season cast iron cooking grids

Infrared Grilling Guide 15

Cleaning Instructions 16

Maintenance Instructions 19

Combustion in air adjustment

Stainless in harsh environments

Troubleshooting 21

Warranty 23

49

25

4 | Features Napoleon.com | PRESTIGE PRO® Series

Features

Full System Features

The grills illustrated in this Owner’s Manual may differ from the model you purchased. Featured model: PRO 825

!

Rear Infrared Rotisserie

Burner to enjoy succulent

rotisserie meals

Easy access drip

pan for efﬁcient

maintenance

LED SPECTRUM

NIGHT LIGHT™

Control Knobs

with safety glow

Stainless Steel Iconic WAVE™ Cooking

Grids for those distinctive sear marks

and even cooking

Dual-level Stainless Steel Sear Plates for

consistent even heating and vaporizing

drippings for more ﬂavourful food

Heavy Gauge Stainless

Steel Burners for long

lasting quality

Instant JETFIRE™

Ignition for quick

and east start-up

Integrated Ice and

Marinade Bucket

with Cutting Board

and Tool Hooks

ACCU-PROBE™ Temperature Gauge

to easily read the temperature for

perfect results

ULTRA-GLIDE™ propane tank

storage tray slides for easy of

access (propane models only)

Large Stainless Steel Warming

Rack for increased cooking area

Dedicated Infrared

SIZZLE ZONE™

bottom burners for

perfectly grilled

steaks

Integrated Wood

Chip Smoker Tray

to enhance ﬂavor

Interior Lights

for late night

entertaining

Two Stage power

side burner for

limitless cooking

Easy Locking

Casters safely lock

the grill in position

Napoleon.com | PRESTIGE PRO® Series Getting Started | 5

Getting Started

CAUTION! The hook-up and installation of the gas and hose connection must be performed by a licensed gas ﬁtter, and

leak tested before operating the grill.

CAUTION! Ensure the hoses do not contact any high temperature surfaces of the grill.

WARNING! Accessible parts may be very hot. Keep young children away.

!

DANGER / WARNING! Advises of a hazard that

could result in a fire, explosion, death or serious

physical injury.

WANING / CAUTION! Advises of a hazard that

could result in minor physical injury or property

damage.

Wear protective gloves.

Wear safety glasses.

CAUTION! Hot surface.

!

ADDITIONAL SAFE OPERATING PRACTICES

• Do not route the hose underneath the drip pan. Maintain

proper hose clearance to the bottom of the unit.

• Ensure sear plates are positioned properly according to

sear plate installation instructions.

• Burner controls must be off when turning the gas cylinder

valve on.

• Do not light burners with the lid closed.

• Do not operate the rear burner(s) with the main burners.

• Do not close the side burner lid when operating or hot.

• Do not deep fry food on the side burner.

• Do not adjust the cooking grids when operating or hot.

• Do not move the appliance during use.

• Turn off the gas supply at the gas cylinder after use.

• Do not modify the appliance.

• Maintenance should only be done when the grill is cool.

• Do not store lighters, matches or any other combustibles in

the condiment tray.

• Keep all electrical supply cords and fuel supply hoses away

from all heated surfaces.

• Clean the grease tray, drip pan, and sear plates regularly to

avoid build-up and grease ﬁres.

• Keep the infrared burner and main burner venturi

tubes free from spider webs and other obstructions by

inspecting and cleaning it regularly.

• Do not allow cold water (rain, sprinkler, hose etc.) to

contact the heated grill. An immediate temperature

change will chip the porcelain and crack the ceramic

burners.

• Do not use a pressure washer to clean any part of the

grill.

• Do not locate this grill where it can be exposed to high

winds, especially when the wind can come from directly

behind the grill.

• Do not operate appliance under any combustible

construction.

• Never cover more than 75% of the cooking surface with

solid metal.

• This appliance must be kept away from ﬂammable

materials while in use.

Important information.

Do not smoke while performing a gas leak test.

Sparks or ﬂames will cause a ﬁre, explosion,

damage to property, serious physical injury, or

death.

Never use an open ﬂame to check for gas leaks.

Sparks or ﬂames will cause a ﬁre, explosion,

damage to property, serious physical injury, or

death.

DANGER! Immediately shut off the gas supply

and disconnect.

!

STOP

• Appliance PRO500 must always maintain proper

clearance to combustibles 20” (508mm) to rear of unit,

7” (178mm) to sides.

• Appliance PRO665 and PRO825 must always maintain

proper clearance to combustibles 27” (686mm) to rear of

unit, 7” (178mm) to sides.

6 | Getting Started Napoleon.com | PRESTIGE PRO® Series

Getting Started

GAS CONNECTIONS

To a Propane Cylinder: Option 1

Only use a 20 lb. (9.1 kg) propane cylinder constructed and marked

in accordance with the Speciﬁcations for LP gas Cylinders of the U.S.

Department of Transportation (D.O.T.) or the Standard for Cylinders,

Spheres and Tubes for Transportation of Dangerous Goods and

Commission, CAN/CSA-B339, as applicable.

Only use a gas pressure regulator speciﬁed by Napoleon. The

regulator must supply a pressure of 11 inches water column (0.39

psi) and have a QCC1 type ﬁtting.

The cylinder connection device must be compatible with the

connection for this outdoor appliance.

The propane cylinder must have:

• A shutoff valve with a QCC1 connection

• A safety relief device

• A collar to protect the valve

• A listed Overﬁll Protection Device

Hook-up and Installation

• Check the cylinder for dents or rust, and have it inspected by

your propane supplier.

• Never use a cylinder with a damaged valve.

• Place the cylinder in its designated area on the bottom shelf.

• Ensure the gas regulator hose has no kinks.

• Remove the cap or plug from the cylinder fuel valve.

• Insert the black QCC1 regulator nipple onto the QCC1 fuel valve.

Hand tighten to right. Do not use tools.

• Ensure the hose does not contact with the drip pan or any high

temperature surfaces of the grill because it will melt and cause

a ﬁre.

• Leak test all joints prior to operating the grill. See “Leak Test”.

WARNING! Do not store a spare propane cylinder below the grill head or side burners.

WARNING! Never use a propane cylinder that is beyond 80% full.

WARNING! Follow all specifications and instructions exactly to prevent fire, explosion, property damage,

personal injury, or death.

WARNING! Do not store a spare gas cylinder below the grill head or side burners.

WARNING! Never use a gas cylinder that is beyond 80% full.

WARNING! Follow all specifications and instructions exactly to prevent fire, explosion, property damage, personal

injury, or death.

WARNING! Disconnect the grill and its individual shutoff valve from the gas supply piping system during any

pressure testing in excess of ½ psi (3.5 kPa).

!

2

1

Napoleon.com | PRESTIGE PRO® Series Getting Started | 7

Getting Started

WARNING! Close the individual shutoff valve to isolate the grill from the gas supply piping system during any

pressure testing equal to or less than ½ Psi (3.5 kPa).

WARNING! Check the hose for evidence of excessive abrasion, melting, cuts or cracks. If the hose is damaged,

it must be replaced with an assembly specifically recommended by Napoleon.

!

To a House Gas Supply Line: Option 2

• A gas supply hose and quick disconnect designed for natural gas and certiﬁed for outdoor use are included with natural gas

grills.

• Natural gas plumbing must supply a pressure of 7 inches water column pressure to the inlet of the grill.

• Piping and valves upstream of the quick disconnect are not supplied.

• The gas pipe must be sized to supply the BTU/h speciﬁed on the rating plate, based on the length of the piping run.

•See “WARNING! General Information” of this manual for installation codes.

1. Hook-up to a gas supply line must be performed by a licensed gas ﬁtter and leak tested before operating the grill.

2. Do not route the hose in close proximity to the drip pan or over top of the back panel.

3. Ensure the hose does not contact any high temperature surfaces.

Quick Disconnect

• Do not install the quick disconnect in an upward direction.

• A readily accessible manual shut-off valve must be installed upstream of the quick disconnect, and as close to it as

possible.

• Connect the ﬂared end of the hose to the ﬁtting on the end of the manifold tube or ﬂex tube (if applicable).

• Tighten using two wrenches. Do not use thread sealer or pipe dope.

• Leak test all joints prior to operating the gas grill. See “Leak Test”.

BE

CAREFUL!

The lid of the grill and

the entire ﬁrebox can

become very hot when

in use.

8 | Getting Started Napoleon.com | PRESTIGE PRO® Series

Getting Started

LEAK TEST

Why and When to Leak Test?

A leak test conﬁrms no gas is escaping after you connect

the hose to the gas supply.

Each time the tank is reﬁlled and reinstalled, ensure

that there are no leaks in the ﬁtting where the regulator

connects to the tank.

Leak test this grill before use, annually, and when any gas

components are replaced.

Leak Test Steps

1. Do not smoke while performing the test.

2. Remove all sources of ignition.

3. Turn all burner controls to the off position.

4. Turn the gas supply valve on.

5. Brush a half-and-half solution liquid soap and water

onto all joints and connections of the regulator, hose,

manifolds, and valves.

6. Bubbles indicate a gas leak.

WARNING! Never use an open flame to check for gas leaks. Sparks or flames will cause a fire, explosion, damage

to property, serious physical injury, or death.

WARNING! Only use the pressure regulator and hose assembly supplied with the

grill, or one in conformity with local codes.

!

If you ﬁnd a leak

1. Tighten any loose joints.

2. If the leak cannot be stopped, immediately shut off the

gas supply and disconnect the grill.

3. Have the grill inspected by a certiﬁed installer, or dealer.

4. Do not use the grill until the leak has been ﬁxed.

STOP

Napoleon.com | PRESTIGE PRO® Series Operation | 9

Operation

1

2

3

2

3

1

2

23

Fig. 1

Fig. 2

Fig. 3

LIGHTING YOUR GRILL

Is it the very ﬁrst time? Perform a Burn-off

Remove warming rack and run the main burners on high for

30 minutes. It is normal for the grill to emit an odor the ﬁrst

time it is lit. This odor is caused by the “burn-off” of internal

paints and lubricants used in the manufacturing process and

will not occur again.

Main Burner Lighting

1. Open grill lid.

2. Push and slowly turn any main burner knob counter clockwise

to HIGH position until pilot lights. Continue to push down on

the control knob until the burner lights and then release.

3. If the pilot does not light – immediately turn the control knob

clockwise to the OFF position. Repeat step 2.

4. If the pilot and burner will not light in 5 seconds – turn the

control knob clockwise to the OFF position. Wait 5 minutes for

gas to dissipate. Repeat steps 2 and 3, or light with a match.

(Fig. 1) .

WARNING! Ensure all burner controls are in the OFF position before slowly turning on gas supply valve.

WARNING! Follow the lighting instructions carefully.

WARNING! Make sure the lid of the grill is OPEN while igniting.

WARNING! Do not adjust the cooking grids while the grill is hot, or operating.

WARNING! Do not use the rear burner while operating the main burner.

!

Operation

Rear Burner Lighting (if equipped)

1. Open grill lid.

2. Remove warming rack.

3. Push and slowly turn rear burner knob counter clockwise to

HIGH position.

4. Press and hold igniter button until the burner lights, or light

by match.

5. If the burner will not light – turn burner control knob

clockwise to the OFF position. Wait 5 minutes. Repeat step 3

and 4. (Fig. 1)

Side Burner Lighting (if equipped)

1. Open burner cover.

2. Push and slowly turn side burner knob counter clockwise to

HIGH position.

3. Press and hold igniter button until the burner lights, or light

by match.

4. If the burner will not ignite – turn burner control knob

clockwise to the OFF position. Wait 5 minutes. Repeat step 2

and 3. (Fig. 2)

Lighting with a match

1. Clip the match into the supplied lighting rod.

2. Insert the lit match through the cooking grids and sear plates

3. While turning the corresponding burner knob to high. (Fig. 3)

Left

Centre

Tube

Burner

Right

Centre

Tube

Burner

Left

Infra

Red

Burner

Right

Infra

Red

Burner

Igniter

Left Tube

Burner Rear

Burner Right

Tube

Burner

Lights

Smoker

Burner

Warming

Burner

Smoker

Tray

10 | Operation Napoleon.com | PRESTIGE PRO® Series

Operation

WARNING! Never grill food directly on the flame side burner. It is designed for use with pots and pans only.

WARNING! Do not close side burner lid while it is operating or hot.

WARNING! Do not deep fry food on the side burner. Cooking with oil can be dangerous.

WARNING! Regularly clean grease out of the entire unit, including the grease tray and the sear plates, to avoid build-up

and grease ﬁres.

!

GRILLING INSTRUCTIONS

Main Burner Use

• Preheat the grill before searing food by operating all main

burners on high with the lid closed for approximately 10

minutes.

• Food cooked for only a short time such as ﬁsh and

vegetables can be grilled with the lid open.

• Grilling with the lid closed ensures higher and consistent

temperatures that cook meat more evenly and can reduce

cooking times.

• The cooking grids can be oiled before preheating to

reduce sticking when grilling lean meat such as chicken

breast, or pork.

GRILLING

PRO TIP!

Use a thermometer

to check the internal

temperature of meat

to ensure it is cooked

perfectly.

• Food that takes longer than 30 minutes such as roasts can

be cooked indirectly with the burner lit opposite the food. See

Indirect Grilling.

• Trim excess fat off meat to prevent ﬂare-ups, or reduce the

temperature of the grill.

• Flare ups – move food away from the ﬂames and reduce the

heat. Leave the lid open.

Direct Grilling

This method is often used for searing, or food cooked for only a short

time such as hamburgers, steaks, chicken, or vegetables.

Place food on the cooking grids directly over the heat.

Sear meat ﬁrst to trap-in the juices and ﬂavor.

Lower the grill temperature to ﬁnish cooking to your preference.

Indirect Grilling

This method uses lower temperatures and circulates heat around the

food cooking it slowly and evenly. Use this method to cook larger cuts of

meat, or food prone to ﬂare-ups such as roast, chicken, or turkey.

Turn one or more burners on and place food on the cooking grid where

there is no ﬂame, or burner on.

Grilling at a lower temperature and slower cooking time results in more

tender meats.

Infrared Main Burner Use (if equipped)

Follow the “Main Burner Lighting” Instructions and operate on high for

5 minutes with the lid closed or until the ceramic burners glow red.

Cook the food directly on the grid(s) following the directions on the

"Infrared Grilling Guide". Food can be seared on the infrared burner and

then transferred to the main burners of the grill to ﬁnish cooking over

direct or indirect heat, depending on your taste and preference.

Napoleon.com | PRESTIGE PRO® Series Operation | 11

Operation

WARNING! Do not leave food unattended on any lit burners.

WARNING! Keep the lid open if main infrared burner is set on high to prevent accidentally burning food.

!

GRILLING

PRO TIP!

Soak the wood chips

before cooking. It will

burn slowly which

increases the smoky

ﬂavor.

Flame Side Burner (if equipped)

The ﬂame side burner can be used like a stove top to make gravy or soups.

The maximum pot or pan diameter is 10” (24 cm).

Be sure your grill is in a location protected from the wind, or the performance

of the side burner will be affected.

Infrared Side Burner (if equipped)

To operate, follow the “Side Burner Lighting” instructions. The infrared

heat provides an even cooking area for searing food when it’s set to high.

Some side burner models have a height-adjustable cooking grid.

Grilling at Night (if applicable)

Illuminate the control knobs by pushing the light bulb icon on the control

panel.

When a burner is operating, the corresponding knob will glow red, while the

rest will remain blue.

Smoker Burner (if equipped)

Place a small amount of wood chips in the solid portion of the smoker tray

and follow the “Main Burner Lighting Instructions” to ignite the smoker.

Different types of wood produce different tastes (e.g. apple, walnut,

hickory), and they come in multiple variations: chunks, chips, dust or

pellets.

A wisp of smoke is enough to get a nice smoky ﬂavor on your food, so be

mindful of the quantity of wood used.

IMPORTANT! Too much smoke will leave an unpleasant tasting

sooty deposit on the food.

!

12 | Operation Napoleon.com | PRESTIGE PRO® Series

Operation

HOW TO USE THE REAR BURNER & ROTISSERIE

WARNING! Disassemble rotisserie components when ﬁnished cooking, wash with warm soapy water, and store

indoors.

WARNING! Use heat resistant grilling gloves when handling the hot rotisserie components.

WARNING! Disconnect rotisserie plug from the outlet when the grill is not in use.

!

Assembling Your Rotisserie Kit (if equipped)

Note: Remove the warming rack prior to using the rear burner and

spit rod. Extreme heat will damage the warming rack.

1. Install the rotisserie motor on the side of the grill using the

mounting bracket(s). Some models have pre-mounted brackets.

2. Once the bracket has been fastened to the grill, slide the

rotisserie motor onto the bracket.

3. Slide the ﬁrst rotisserie fork just past the middle of the spit rod

and tighten into place. Thread the meat onto the spit rod and

push the meat into the fork. Slide the second rotisserie fork

on the opposite end of the spit rod and push the fork into the

meat until secure. Tighten the fork into place.

4. Carefully insert the pointed end of the spit rod into the

rotisserie motor and set the opposite end across the

hangers. The heavy side of the meat will naturally hang

down to balance the load.

5. Slide the stop bushing onto the spit rod until it is past

the inside of the hood. This will secure the side to side

movement of the spit rod.

6. Tighten the stop bushing and spit rod handle. Place a

metal dish under the meat to collect the drippings.

DID YOU

KNOW?

You can remove the

cooking grids if they

interfere with cooking

larger cuts of meat.

2

1

3

IMPORTANT! Always wear gloves when

handling components of the grill.

!

Tips about using the Rotisserie:

• Operate the rear burner on high until the meat

browns. Reduce heat. Keep lid closed.

• Use a thermometer to check the internal

temperature of the meat.

• Roasts and poultry should brown on the

outside and stay tender on the inside.

• Use drippings to baste and make gravy.

• A 3-pound chicken takes approximately 1 ½

hours on medium to high.

• Be mindful of your rotisserie motor capacity.

Never overload your equipment.

• Be sure to always set an evenly balanced load

on your rotisserie.

How to cook multiple chickens

1. Tie or skewer wings to the body of the

chickens.

2. Slide rotisserie fork onto spit rod.

3. Thread ﬁrst chicken onto spit rod until it

is held into place by the rotisserie fork.

Tighten.

4. Thread next 2 chickens onto spit rod so

all the chickens are close together.

5. Slide second rotisserie fork onto spit

rod and push into chicken until all 3

chickens are squeezed together tightly.

Tighten.

Napoleon.com | PRESTIGE PRO® Series Operation | 13

Operation

ILLUMINATION INSTRUCTIONS

Motion Sensor and Knobs, Oven and Cabinet Lights (if equipped)

Turn the Power Switch ON located on the box inside the grill cabinet.

A red and a blue LED light will turn on. Illumination settings are in Default mode.

Default mode

• Knob light mode Blue

• Brightness on high

• Motion Sensor is On

Knob lights modes

• Blue

• White

• Green - color spectrum mode

Select Knob light mode by holding down the switch to toggle from blue to white to green.

Release it on the desired mode.

Go back to Default mode: by holding down the button for 2 seconds.

Brightness can be adjusted in these modes only

• When you have the knobs on the Color spectrum mode the knobs will slowly cycle

through the color spectrum, starting at green.

• Quickly Press Twice to stop the spectrum at any color you choose

• Press twice again to let it continue changing colors.

Motion Sensor

• The knob and logo lights will remain ON as long as motion is detected

within 1 meter in front of your grill. They will turn off after 15 minutes of inactivity.

• While the motion sensor is ON (as indicated by the blue LED), you can turn the

oven and cabinet lights on and off with the switch.

• Press the button in the box to turn the sensor OFF

(indicated by blue LED).

• Now all your lights are controlled with the switch.

• The oven and cabinet lights will turn off after two hours.

If the motion sensor is OFF, the knob and logo lights will also

shut off after two hours.

Brightness: Press the button to change brightness

between high (100%), medium (65%) and low (35%).

This can only be changed when the knob lights are in

White or Blue Mode

Illumination Modes

Selecting a Color

K

n

o

b

a

n

d

L

o

g

o

L

i

g

h

t

s

w

o

r

k

t

o

g

e

t

h

e

r

I

f

t

h

e

P

o

w

e

r

S

w

i

t

c

h

i

s

O

F

T

h

e

i

g

n

i

t

i

o

n

w

i

l

n

o

t

w

o

r

k

• The logo and knobs lights work as a set. However, you can also turn the logo

light off while keeping the knobs light on.

• Double click the button to turn on the logo light OFF at any time.

Double click the again to turn back on.

• If the unit is powered OFF and ON again (main power switch), the logo light

will return to its default mode

Logo light ON / OFF

14 | Operation Napoleon.com | PRESTIGE PRO® Series

Operation

THE GRILLING EXPERIENCE CHECKLIST

Refer to this list every time you grill

☐Read Owner’s Manual

Be sure to have read the owner’s manual and all the safety instructions.

☐Clean grease tray

Always ensure you clean the grease tray prior to grilling to avoid fires and flare-

ups.

☐Check the hose

Ensure the grill is off and cool. Check the hose for evidence of excessive

abrasions, or cuts. Have the hose replaced before use if the hose is damaged.

☐Preheat and clean grids

Coat the grids with vegetable shortening and preheat your grill to burn off

excess residue and prevent sticking. Clean cast iron grids with a brass

wire brush and stainless steel grids with a stainless brush. See "Cleaning

Instructions".

NOTE: Stainless steel cooking grids are corrosion resistant and require less

maintenance than cast iron grids.

☐Prep area

Make sure everything you need while grilling such as your utensils, seasonings,

sauces, and dishes are within your reach. Don’t leave your food unattended, or it

could burn.

☐Don’t peek and flip once

Try not to open the lid and peek too much, or heat will escape and throw your

temperature and cooking times off. Flip your food only once, especially steak and

chicken.

☐Leave space

Leave some space on the grill and between food, so you have room to move food

around if you need to.

☐Use a thermometer

Use a thermometer to ensure food is cooked thoroughly. Follow the appropriate

temperatures guidelines for all types of meat, especially poultry.

HOW TO SEASON CAST IRON COOKING GRIDS

This procedure MUST be done prior to ﬁrst use and repeated every 3-4 uses to keep grids looking new.

1. Remove cast iron grids from the grill.

2. Wash grids with warm soapy water and soft cloth.

Pat dry and allow grids to completely dry.

3. Apply fat/oil evenly using a silicone brush on both

sides.

4. Preheat appliance to 350°F-400°F(176°C-204°C).

5. Install cooking grids and cook for 30 minutes.

6. Apply a second even coat of fat/oil on cooking grids,

and keep cooking for 30 more minutes.

7. Grids are now seasoned.

NOTE: If rust has formed on the cast iron grids,

remove the rust with scouring pad or brass brush and

repeat the seasoning process.

GRILLING

PRO TIP!

Always preheat the grill

before cooking to burn

off leftover residue and

prevent food from sticking

to the grate.

GRILLING

PRO TIP!

Get inspired to create

delicious meals from the

recipes and grilling

techniques at

www.napoleon.com and

Napoleon’s cookbooks.

OIL AND FAT

SUGGESTION!

Grapeseed Oil

Sunﬂower Oil

Soybean Oil

Extra Virgin Olive Oil

Canola Oil

If not available, select an oil

or fat that has a high smoke

point. Do not use salted fats

like butter or margarine.

•

Napoleon.com | PRESTIGE PRO® Series Grilling Guide | 15

Grilling Guide

Infrared Grilling Guide

FOOD CONTROL KNOB SETTING COOKING TIME SUGGESTIONS

Steak

1 inch (2.54 cm) thick

HIGH – 2 minutes each side

Rare – 4 minutes

Ask for marbled fat in cut.

Fat is a natural tenderizer

and keeps meat juicy.

HIGH to MEDIUM – High

heat 2 minutes each side

then turn to medium heat

Medium – 6 minutes

Well done – 8 minutes

Hamburger

½ inch (1.27 cm) thick

HIGH – 2 minutes each side Rare – 4 minutes

Keep patties all the same

thickness for equal cooking

times. Patties 1 inch thick or

more should be grilled using

indirect heat.

HIGH – 2 ½ minutes each

side Medium – 5 minutes

HIGH – 3 minutes each side Well done – 6 minutes

Chicken

HIGH, MEDIUM, LOW – 2

minutes each side then

medium-low to low heat

20 – 25 minutes

Slice joint connecting the

thigh and leg ¾ through for

the meat to lie ﬂat on the

burner and cook evenly.

Pork Chops

MEDIUM 6 minutes each side Choose thick cuts for more

tender meat. Trim off excess

fat.

Spare Ribs

HIGH to LOW – High for

5 minutes then low until

ﬁnished

20 minutes each side

turning often

Choose lean meaty ribs. Grill

until meat pulls easily from

the bone.

Lamb Chops

HIGH to MEDIUM – High

for 5 minutes then Medium

until ﬁnished

15 minutes each side Choose thick cuts for more

tender meat. Trim off excess

fat

Hot dogs

MEDIUM to LOW 4 – 6 minutes Select larger wieners and slit

lengthwise before grilling

16 | Cleaning Napoleon.com | PRESTIGE PRO® Series

Cleaning

Cleaning Instructions

First Time Use

1. Wash grids by hand with water and mild dish soap to remove

any residue from the manufacturing process. DO NOT wash in a

dishwasher.

2. Rinse thoroughly with hot water and dry completely with a soft cloth

to prevent moisture from entering the cast iron.

Cast Iron Grids

• Season your grids to add a protective coating to prevent corrosion

See Grilling Tips – How to Season your Cast Iron Cooking Grids.

Stainless Steel Grids

• Stainless steel cooking grids can be cleaned by preheating the grill

and using a wire brush to remove residue.

• Stainless steel grids will permanently discolor from regular use

because of high temperatures when grilling.

Infrared Side Burner

• Most drippings and food particles that fall on the infrared burner

surface incinerates immediately because of the high intensity heat.

• Do not clean the ceramic tile with a wire brush.

• Do not use water or other liquids to clean the burner. An immediate

change in temperature will cause cracking of the ceramic tile.

• Light burner and operate on high for 5-10 minutes to remove any

left-over residue.

Inside of the Grill

1. Remove the cooking grids.

2. Use a brass wire brush to clean loose debris from the sides and

underneath the lid.

3. Scrape the sear plates with a putty knife or scraper. Use a wire

brush to remove the ash.

4. Remove the sear plates and brush debris from the burners with a

wire brush.

5. Sweep debris from inside the grill into the drip pan.

WARNING! Always wear protective gloves and safety glasses when cleaning your grill.

WARNING! Accumulated grease is a fire hazard.

WARNING! Cleaning should only be done when the grill is cool to avoid the possibility of

burns.

!

Napoleon.com | PRESTIGE PRO® Series Cleaning | 17

Cleaning

WARNING! Ensure all burners are turned off and grill is cool before cleaning. Do not use oven cleaner to clean any part

of the grill. Do not put cooking grids or any other parts of the grill in a self-cleaning oven to clean. Clean the grill in an

area where cleaning solution won’t harm decks, lawns, or patios.

WARNING! Barbecue sauce and salt can be corrosive and will cause rapid deterioration of the grill components

unless cleaned regularly.

Drip Pan

Every grill head, side burner and drop-in burner have a

corresponding drip pan. It is easily accessible through doors or

openings.

• Grease and excess drippings collect in the drip pan located

beneath the grill and accumulate in the disposable grease tray

below the drip pan

(if applicable).

• Only use Napoleon approved liners on the drip pan. Never use

aluminum foil, sand or any other unapproved material. This can

prevent grease from ﬂowing properly.

• Clean frequently to avoid grease build-up – approximately every

4-5 uses.

Cleaning steps:

1. Slide the drip pan from the grill to access the disposable

grease tray or to clean the drip pan.

2. Scrape the drip pan out with a putty knife or scraper.

3. Replace the disposable grease tray every 2-4 weeks depending

on grill usage (if applicable).

4. See your Napoleon Grill dealer for supplies.

Control Panel

ONLY use warm soapy water.

Text is printed directly on the control panel and will gradually rub

off if abrasive or stainless steel cleaners are used.

Proper cleaning of the control panel will ensure the text remains

dark and legible.

Aluminum Castings

Clean with warm soapy water.

Aluminum doesn’t rust, but high temperatures and weathering can

cause oxidization on the surface of the castings that look like white

spots.

See “Maintenance Instructions” for more information on how to

prevent oxidized aluminum.

Outside Grill Surface

• Only use a stainless steel non-abrasive cleaner. Abrasive

cleaners or steel wool will scratch the ﬁnish.

• Always wipe in the direction of the grain.

• Handle porcelain enamel components with care.

• The baked-on enamel ﬁnish is glass-like and will chip if struck.

• Stainless steel parts discolor overtime when heated and will

turn a golden or brown hue. This is normal and won’t affect the

performance of the grill.

!

18 | Cleaning Napoleon.com | PRESTIGE PRO® Series

Cleaning

WARNING! It is very important the valve/orifice enters the burner tube when reinstalling the burner after cleaning

and before lighting your grill, or a fire or explosion could occur.

WARNING! Avoid unprotected contact with hot surfaces.

WARNING! Do not use abrasive cleaners or steel wool on any painted, porcelain, or stainless steel parts of your

grill because it will scratch the finish.

!

SAFETY

FIRST!

Always wear protective

gloves and safety

glasses when servicing

your grill.

Insect Screen and Burner Ports

Spiders and insects are attracted to small enclosed spaces.

Napoleon has equipped the burner with an insect screen on the air

shutter. This reduces the likelihood of insects building nests inside

the burner, but doesn’t eliminate the problem.

A nest or web can cause the burner ﬂame to burn a soft yellow or

orange and cause a ﬁre or ﬂashback at the air shutter underneath the

control panel.

1. Remove the screw (s) that attaches the burner to the back wall of

the grill. Slide the burner back and upwards to remove.

2. Use a ﬂexible venturi tube brush to clean the inside of the

burner.

3. Shake loose debris from the burner through the gas inlet.

4. Check the burner ports and valve oriﬁces for blockages: burner

ports can close over time because of cooking debris and

corrosion.

5. Use an opened paper clip, or the supplied port maintenance bit

to clean burner ports.

6. Drill out blocked ports using the supplied drill bit in a small

cordless drill: this can be done with the burner attached to the

grill, but it’s easier if removed from the grill.

7. Do not ﬂex the drill bit when drilling the ports because the drill

bit will break.

8. This drill bit is for burner ports NOT for brass oriﬁces that

regulate the gas ﬂow to the burner.

9. Do not enlarge the holes

10. Ensure the insect screen is clean, tight, and free of any lint

or other debris.

11. Reverse the procedure to reinstall the burner.

12. Ensure the valve enters the burner when installing.

13. Replace sear plate mount and tighten screws to complete

re-installation.

Napoleon.com | PRESTIGE PRO® Series Maintenance | 19

Maintenance

Maintenance Instructions

RECOMMENDATIONS

This grill should be thoroughly inspected and serviced annually by a qualiﬁed service person.

• Do not obstruct the ﬂow of ventilation and combustion air.

• Keep the cylinder enclosure ventilation openings located on the side of the cart or enclosure and front and back of the

bottom shelf clear from debris.

WARNING! Keep the grill away from combustible materials, gasoline, and other flammable vapors and liquids.

!

COMBUSTION IN AIR ADJUSTMENT

!

IMPORTANT! This must be done by a qualified gas installer.

• The air shutter is factory set and should not require adjusting

under normal conditions. Adjustments might be required under

extreme ﬁeld conditions.

• The ﬂames of the air shutter will be dark blue, tipped with light

blue and occasionally yellow when adjusted correctly.

• Too little air ﬂow to the burner will produce soot and lazy yellow

ﬂames.

• Too much air ﬂow to the burner will cause ﬂames to lift erratically

and cause igniting difﬁculties.

Adjusting the Air Shutter

1. Remove cooking grids and sear plates. Leave lid open.

2. You may have to open the cabinet door or remove the top drawer

(if equipped) to access the air shutter screw located at the mouth

of the burner.

3. Remove the back cover to adjust rear tube burner air shutter.

4. Loosen air shutter lock screw and open or close air shutter as

required. (Fig. 1)

5. Light the burners on high.

6. Visually inspect burner ﬂames.

7. Turn burners off, tighten locking screws, and replace removed

parts when shutters are set correctly.

8. Ensure insect screens are installed.

Note: Infrared burners have no air adjustment.

WE WANT

TO HELP!

Contact the Napoleon

Customer Solutions

Department for

recommended

replacement parts.

1-866-820-8686.

Burner Port

Yellow Tip

Dark Blue

Light Blue

Model Type of Gas Main Burner Rear Tube

Burner Smoker Burner Warming Burner

PRO 500 Propane 1/2” (13mm) Full Open - -

Natural Gas 3/8” (10mm) 1/8” (3mm) - -

PRO 665 Propane 1/2” (13mm) Full Open 1/8” (3mm) -

Natural Gas 3/8” (10mm) 1/8” (3mm) 1/16” (1.6mm) -

PRO 825 Propane 1/2” (13mm) Full Open 1/8” (3mm) 1/8” (3mm)

Natural Gas 3/8” (10mm) 1/8” (3mm) 1/16” (1.6mm) 1/16” (1.6mm)

Fig. 1

20 | Maintenance Napoleon.com | PRESTIGE PRO® Series

Maintenance

WARNING! Turn off gas at the source and disconnect the unit before servicing.

WARNING! Maintenance should only be done when the grill is cool to avoid the possibility of burns.

WARNING! A leak test must be performed annually and when any component of the gas train is replaced, or when

the smell of gas is present.

!

SAFETY

FIRST!

Never cover more than

75% of any main or side

burner cooking surface

with any solid metal

(e.g. griddles or pans)

STAINLESS IN HARSH ENVIRONMENTS

Stainless steel oxidizes or stains in the presence of chlorides and sulﬁdes,

especially in coastal regions, warm and highly humid areas, and around

pools and hot tubs. These stains look like rust, but they can be easily

removed or prevented. Wash stainless and chrome surfaces every 3-4

weeks. Clean with warm soapy water.

Burner Maintenance

• Extreme heat and a corrosive environment can cause surface

corrosion to occur even though the burner is made from heavy wall

304 stainless steel.

Maintenance and Protection of Infrared Burners

Your infrared burners are designed to provide a long service life, but you

must be careful to prevent cracking of their ceramic surfaces. Fractures will

cause the burners to malfunction.

IMPORTANT! Damage resulting from by failure to follow these

instructions is NOT covered by your grill warranty.

!

Steps to Avoid Damaging Ceramic Surfaces

1. Never douse a ﬂame or control ﬂare-ups with water.

2. Do not allow cold water (rain, sprinkler, hose etc.) to come in contact

with hot ceramic burners. An immediate change in temperature will

cause cracking of the ceramic tile.

3. A ceramic burner that becomes wet before use will create steam

when operated later and produce pressure that will crack the

ceramic.

4. Repeated soaking of the ceramic can cause it to swell and expand

producing pressure that will make the ceramic crack and crumble.

5. Inspect the ceramic for possible water soaking if you ﬁnd standing

water in the grill. Remove the burner if the ceramic is wet. Turn it

upside down to drain the excess water. Bring ceramic indoors to dry

thoroughly.

6. Do not allow hard objects to impact the burner. Take care when

inserting or removing cooking grids and using accessories.

Clearance Ventilation of hot air

• Hot air must have a way to escape the grill for the burners to

function properly.

• The burners can become deprived of oxygen if the hot air is not

allowed to escape causing them to back-ﬂash. The ceramic can

crack if this occurs repeatedly.

Replacing Oven Halogen Bulbs (if equipped)

• Remove the screw securing the housing in place.

• Snap the lens and metal bracket out of the housing.

• Wearing protective gloves, gently pull the old bulb from the socket

and replace with the new bulb.

• Reinstall the lens into the housing and bend the tabs on the front

back into position.

WARNING! Always wear protective gloves when changing the halogen bulb in your grill.

La page charge ...

NAPOLEON PRO665-3 Le manuel du propriétaire

NAPOLEON PRO665-3 Le manuel du propriétaire

dans d''autres langues